Molten salts for efficient removal of radioactive contaminants from stainless steel surface: Mechanisms and applications.

Here, we have demonstrated an innovative decontamination strategy using molten salts as a solvent to clean stubborn uranium contaminants on stainless steel surfaces. The aim of this work was to investigate the evolutionary path of contaminants in molten salts to reveal the decontamination mechanism, thus providing a basis for the practical application of the method. Thermodynamic analysis revealed that alkali metal hydroxides, carbonates, chlorides and nitrates can react with uranium oxides (UO3 and U3O8) to form various uranates. Notably, the decontamination mechanism was elucidated by analyzing the chemical composition of the contaminants in the molten salts and the surface morphology of the specimens considering NaOH-Na2CO3-NaCl melt as the decontaminant. The decontamination process involved two stages: a rapid decontamination stage dominated by the thermal effect of molten salt, and a stable decontamination stage governed by the chemical reactions and diffusion of molten salt. Subsequently, a multiple decontamination strategy was implemented to achieve high decontamination rates and low residual radioactivity. Within the actual cleaning time of 30 min, the decontamination efficiency (DE) of UO3-contaminated specimens reached 97.8% and 93.0% for U3O8-contaminated specimens. Simultaneously, the radioactivity levels of all specimens were reduced to below the control level for reuse in the nuclear domain. Particularly, the actual radioactive waste from the nuclear industry reached a reusable level of radioactivity after decontamination. The NaOH-Na2CO3-NaCl melt outperforms conventional chemical solvents and may be one of the most rapid and efficient decontaminants for stubborn uranium contamination of metal surfaces, which provides insights in regard to handling nuclear waste.

Decontamination of uranium-containing radioactive waste from stainless steel surfaces using NaOH-based molten salts.

Herein, we report a new strategy for the rapid removal of uranium-containing contaminants from metal surfaces, and it relies on decontaminants made of NaOH-based molten salts. The addition of Na2CO3 and NaCl to NaOH exhibited superior decontamination performance, with a decontamination rate of 93.8% within 12 min, outdoing the performance of the single NaOH molten salt. The experimental results demonstrated that the synergistic effects between CO32- and Cl- promoted the corrosion efficiency of the molten salt on the substrate, which accelerated the decontamination rate. Additionally, benefiting from the optimization of the experimental conditions by the response surface method (RSM), the decontamination efficiency was improved to 94.9%. Notably, it also showed remarkable results in the decontamination of specimens containing different uranium oxides at low and high levels of radioactivity. This technology is promising for broadening the path in rapid decontamination of radioactive contaminants on metal surfaces.