The impact of virtual reality scenes on stress response characteristics of individuals with different personality traits.

Virtual reality based physical stress (VRPS) paradigms could eliminate the influence of social factors on participants, and it may be a desirable tool to explore the impact of personality traits on stress levels. In this study, we attempt to explore the effects of VRPS on stress response among individuals with different personality traits. Forty male participants with an average age of 22.79 ± 0.41 years were divided into two groups based on Harm Avoidance (HA) scores of Tridimensional Personality Questionnaire (TPQ), referred to as the Low-HA group and the High-HA group. The stress levels of the participants were assessed using salivary α-amylase (sAA) activity and heart rate variability (HRV) indices pre- and post-stress. The influence of personality traits on stress response among different groups was analyzed. VRPS significantly affected the sAA activity and HRV indicators of both groups. During and after stress, there were significant differences in sAA activity and HRV indicators between the two groups. The sAA levels and HRV indices of the Low-HA group were lower than those of the High-HA group. Furthermore, sAA levels and HRV indices were correlated with the scores of TPQ. VRPS scenarios elicit different stress responses on individuals with different harm avoidance personality traits. Stress evaluation based on VR scenarios presents potential in personality trait assessments, particularly for distinguishing between individuals with low and high HA tendencies.

Iron level participates in the pathological damages of dental caries in infant rats by affecting enamel mineralization.

Iron deficiency anemia (IDA) is a common nutritional disease associated with early childhood caries. This study aimed to explore the role of iron levels in pathological changes of dental caries in childhood. Rats were divided into four groups based on their iron content: IDA, positive control (PC), high iron (HI), and negative control (NC). Except for the rats in the NC group, rats in the other groups were inoculated with Streptococcus mutans and fed cariogenic high-sugar fodder to induce caries. Three months later, the caries status of the molars was evaluated at both the smooth and sulcal surfaces according to Keyes scores. Scanning electron microscopy (SEM) was performed to reveal microstructural changes in caries. Energy-dispersive spectroscopy (EDS) was used to determine the elemental composition of the enamel and dentin. In addition, the histopathology of the salivary gland was detected using hematoxylin and eosin (HE) staining.The results showed that rats in the PC group exhibited obvious carious lesions. The carious score was significantly higher in the IDA group than in the PC group but was lower in the HI group. SEM revealed complete destruction of the enamel and damage to the middle dentin in the IDA group. In contrast, the molars in the HI group exhibited some degree of enamel demineralization, but the underlying dentin was almost intact. In addition, the elemental compositions of the enamel and dentin were similar among the four groups, and iron was detected only in the HI group. No differences were observed in the morphological structures of the salivary glands of rats from the different groups. In conclusion, ID enhanced the pathological damage of caries, whereas HI weakened it. Iron may participate in the pathological damage caused by childhood caries by affecting enamel mineralization.

Iron deficiency anemia associated factors and early childhood caries in Qingdao.

BACKGROUND: Iron deficiency anemia (IDA) has been shown to be related to early childhood caries (ECC). However, data on the relationship, if any, between IDA-associated factors and ECC remain scant. This study aimed to explore the interplay between IDA-associated factors and ECC. METHODS: This study randomly sampled a total of 1598 children in Qingdao city, and analyzed the severity of ECC using decayed-missing-filled teeth index, while the rate of caries was analyzed following the WHO recommendations. The correlation between IDA and ECC was analyzed by both the chi-square test and Mann-Whitney U test. In addition, we designed an electronic questionnaire and employed the disordered multi-classification logistic regression to interrogate the relationship between the IDA-associated factors and ECC. RESULTS: Children with IDA had higher rates and severe ECC than those without IDA (p < 0.001). Children who were breastfed until 2 years old had a higher risk of IDA and ECC, compared to those who were not {OR 3.453 (1.681-7.094)}. Compared with children who had no history of IDA at the age of 2 years or below, those with IDA history had a higher risk of IDA and ECC {OR 8.762 (3.648-21.041)}. In addition, children who had a maternal history of IDA at pregnancy were at a higher risk of IDA and ECC compared to those who had no IDA history at pregnancy {OR 4.913 (2.934-8.226)}. Our data showed that children from a family with an annual income lower than 50,000 Renminbi (RMB) had a higher risk of IDA and ECC compared to those with an annual family income higher than 200,000 RMB {OR 3.421 (1.505-7.775)}. On the other hand, compared with children taking iron supplements, children who did not were at a higher risk of ECC and IDA {OR 5.602 (1.858-16.896)}. CONCLUSION: Factors such as low family income, history of IDA in children aged 2 years or younger, IDA history during pregnancy, children breastfed until 2 years old, and those not taking iron supplements were significantly associated with the occurrence of ECC and IDA.

Multicolorimetric ELISA biosensors on a paper/polymer hybrid analytical device for visual point-of-care detection of infection diseases.

Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/µL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations.

Endothelial Cell Migration on Poly(ε-caprolactone) Nanofibers Coated with a Nanohybrid Shish-Kebab Structure Mimicking Collagen Fibrils.

Regulating cell migration dynamics is of significance in tissue engineering and regenerative medicine. A 3D scaffold was created to provide various topographies based on a poly(ε-caprolactone) (PCL) self-induced nanohybrid shish-kebab structure, which consisted of aligned PCL nanofibers and spaced PCL crystal lamellae grown on the fibers. Electrospinning was applied followed by self-induced crystallization. The results resembled natural collagen fibrils in an extracellular matrix. This variable microstructure enabled control of cell adhesion and migration. The kebab size was controlled by initial PCL concentrations. The geometry of cells seeded on the fibers was less elongated, but the adhesion was more polarized with a higher nuclear shape index and faster migration speed. These results could aid in rapid endothelialization in tissue engineering.

Wnt5a is involved in LOX-1 and TLR4 induced host inflammatory response in peri-implantitis.

BACKGROUND AND OBJECTIVE: Peri-implantitis is a plaque-associated pathological condition occurring in tissues around dental implants, characterized by inflammation in the peri-implant mucosa and subsequent progressive loss of supporting bone. Wnt5a is the activating ligand of the non-canonical Wnt signaling pathways and plays important roles in leukocyte infiltration and cytokine/ chemokine production in inflammatory disorders. Previous studies showed that Wnt5a was significantly up-regulated in gingival tissues of chronic and aggressive periodontitis. However, the roles and the regulatory mechanisms of Wnt5a in peri-implantitis are not well known. METHODS: The expression of Wnt5a in gingival tissues collected from 8 healthy implant patients and 8 peri-implantitis patients was analyzed by Western blotting and immunofluorescence. Porphyromonas gingivalis infected macrophages isolated from the peripheral blood of healthy volunteers were used as an in vitro cellular model of peri-implantitis. Using neutralizing antibodies, inhibitors and siRNA, the production and roles of Wnt5a in peri-implantitis were assessed by immunofluorescence, quantitative polymerase chain reaction (RT-PCR) and Western blotting. Unpaired two-tailed Student's t test was used to compare qRT-PCR and Western blotting results. P ≤ .05 was considered statistically significant. RESULTS: Wnt5a was highly expressed in the gingival tissues of peri-implantitis patients. Compared to controls, Wnt5a increased in P gingivalis infected macrophages. Wnt5a production in response to P gingivalis infection was dependent on LOX-1 and TLR4. Compared to controls, Wnt5a knockdown impaired IL-1ß, MCP-1, and MMP2 production induced by P gingivalis infection. CONCLUSION: Our results indicate that Wnt5a is involved in LOX-1 and TLR4 induced inflammatory signature via inflammatory cytokines production in response to P gingivalis infection. These findings demonstrate that Wnt5a maybe an important component of the host immune response in peri-implantitis.

CCHE1 accelerated the initiation of oral squamous cell carcinoma through enhancing PAK2 expression by sponging miR-922.

BACKGROUND: Oral squamous cell carcinoma (OSCC) is a normal form of mouth cancer, comprising the majority of oral cancers. A large number of long non-coding RNAs (lncRNAs) have been reported due to their oncogenic function in cancers. Recent studies show that lncRNA CCHE1 is an oncogene in a wide range of cancers. Whether CCHE1 accelerates the progression of OSCC is still undiscovered. METHODS: The qRT-PCR analysis was used to determine CCHE1, miR-922, and PAK2 expression levels. CCK8 and colony formation assays were applied to evaluate OSCC cell proliferative ability. Transwell assay was performed to investigate the capability of cell migration and invasion. Cell apoptosis was assessed by flow cytometry analysis. The distribution of CCHE1 in OSCC cells was confirmed via subcellular fractionation assay. Luciferase reporter assay was used to verify the connection between miR-922 and CCHE1 or PAK2. RESULTS: qRT-PCR analysis identified the upregulation of CCHE1 in OSCC cells. Knockdown of CCHE1 curbed the proliferation, migration, and invasion and hastened the apoptosis in OSCC cell lines. Moreover, it was found that miR-922 could interact with CCHE1. Besides, PAK2 was identified as the target gene of miR-922 and its expression was negatively modulated by miR-922 and positively regulated by CCHE1. Restoration assay manifested that the suppressing influence of CCHE1 depletion on OSCC progression was rescued by amplified PAK2. CONCLUSIONS: CCHE1 increases the expression of PAK2 to promote the progression of OSCC by competitively binding to miR-922 in OSCC cells.

Smartphone-Based Electrochemical Potentiostat Detection System Using PEDOT: PSS/Chitosan/Graphene Modified Screen-Printed Electrodes for Dopamine Detection.

In this work, a smartphone-based electrochemical detection system was designed and developed for rapid and real-time detection of dopamine (DA). The system included a screen-printed electrode (SPE) used as a sensor, a hand-held electrochemical potentiostat and a smart phone with a specially designed app. During the detection period, the SPEs modified with poly(3,4-ethylenedioxythiophene) (PEDOT), chitosan (CS) and graphene (G) were used to convert and amplify the electrochemical reaction signals. The electrochemical potentiostat was used to generate excitation electrical signals and collect the electrical signals converted from the sensor. The smartphone-connected to the detector via Bluetooth-was used to control the detector for tests, further process the uploaded data, and plot graphs in real time. Experimental results showed that the self-designed sensing system could be employed for highly selective detection of DA in the presence of interfering substances such as ascorbic acid (AA) and uric acid (UA). CV was carried out to characterize the electrochemical properties of the modified SPEs and the electrochemical behaviors of DA on the modified SPEs. Finally, according to the analysis of DPV responses of DA, the system could detect DA with a detection sensitivity of 0.52 ± 0.01 µA/µM and a limit of detection of 0.29 µM in the linear range of DA concentrations from 0.05 to 70 µM.

An adjuvant compound that enhances immunogenicity at fractional doses of the Sabin-inactivated poliovirus vaccine (sIPV) with a long duration of protection in a rat model.

BACKGROUND: At the same dosage, the new generation of Sabin-inactivated poliovirus vaccine (sIPV) is less immunogenic than the traditional oral polio vaccine (OPV) dosage in China. The useful adjuvant might be a necessary strategy to strengthen the immune protective effects. METHODS: In this study, we produced an adjuvant compound (named KML05) that could promote immunogenicity and fractional doses of sIPV with a long duration of protection in a rat model. The compound adjuvant had both advantages and a function of MF59 and carbopol971P. RESULTS: The effect seroconversion of experimental animals immunized with KML05 could be extended to one-eighth of the dose. According to the result of the geometric mean titers (GMTs), KML05 adjuvant could save eight times the amount of sIPV D-antigen usage, but aluminum hydroxide adjuvant could save twice at the same titers. Additionally, it was found that there was a significant difference in the GMT titer of poliovirus type 2 between animals immunized by KML05 and alum adjuvant (P < 0.05). At 12th-month postvaccination, the neutralization titers stimulated by IPV-KML05 were maintained over a longer time period in immunized animals. CONCLUSION: Our research team developed KML05 adjuvant, which combined carbopol971P with MF59, increased antibody responses to sIPV for a longer duration of protection in a rat model.

Clinical Effectiveness of Er: YAG Lasers Adjunct to Scaling and Root Planing in Non-Surgical Treatment of Chronic Periodontitis: A Meta-Analysis of Randomized Controlled Trials.

BACKGROUND Er: YAG lasers (ERLs) show suitable characteristics for scaling and root planing, but previous studies have drawn conflicting conclusions. This meta-analysis aimed to systematically appraise the available evidence concerning the effectiveness of ERLs as an adjunct to scaling and root planing (SRP) for non-surgical periodontal treatment. MATERIAL AND METHODS Randomized controlled trials (RCTs) comparing ERLs+SRP with SRP alone for the treatment of chronic periodontitis were searched in 9 electronic biomedical databases up to January 2018. The weighted mean differences (WMDs) and 95% confidence intervals (CIs) were counted for probing depth (PD) reduction, clinical attachment level (CAL) gain, and visual analog scale (VAS) score. Heterogeneity was evaluated with the I² statistic for interstudy comparisons and the χ²-based Q statistic for intra-study comparisons. Sensitivity analysis was conducted by switching to a random or fixed effect model based on the heterogeneity. Publication bias was measured by Begg's test. RESULTS Ten related RCTs met the inclusion criteria. There were statistically significant differences in the assessed clinical parameters at the three-month follow-up: PD reduction (WMD=0.32, 95%CI range from 0.14 to 0.51, p<0.001; p=0.003, I²=69.7%); CAL gain (WMD=0.31, 95%CI range from 0.22 to 0.40, p<0.001; p=0.209, I²=28.8%); and VAS scores (WMD=-1.38, 95%CI range from -2.45 to -0.31, p<0.001; p=0.182, I²=44%). There were no significant differences at the six- and twelve-month follow-ups. Sensitivity analysis revealed that the results were consistent. No evidence of publication bias was detected. CONCLUSIONS This systematic analysis demonstrated that ERLs+SRP provides additional short-term effectiveness and that patients experience less pain compared to SRP. There were no significant differences at the medium-term and long-term follow-ups. Long-term well-designed RCTs are required.

An automatic robotic system for three-dimensional tooth crown preparation using a picosecond laser.

BACKGROUND: Laser techniques have been introduced into dentistry to overcome the drawbacks of traditional treatment methods. The existing methods in dental clinical operations for tooth crown preparation have several drawbacks which affect the long-term success of the dental treatment. OBJECTIVE: To develop an improved robotic system to manipulate the laser beam to achieve safe and accurate three-dimensional (3D) tooth ablation, and thus to realize automatic tooth crown preparation in clinical operations. METHOD: We present an automatic laser ablation system for tooth crown preparation in dental restorative operations. The system, combining robotics and laser technology, is developed to control the laser focus in three-dimensional motion aiming for high speed and accuracy crown preparation. The system consists of an end-effector, a real-time monitor and a tooth fixture. A layer-by-layer ablation method is developed to control the laser focus during the crown preparation. Experiments are carried out with picosecond laser on wax resin and teeth. RESULTS: The accuracy of the system is satisfying, achieving the average linear errors of 0.06 mm for wax resin and 0.05 mm for dentin. The angle errors are 4.33° for wax resin and 0.5° for dentin. The depth errors for wax resin and dentin are both within 0.1 mm. The ablation time is 1.5 hours for wax resin and 3.5 hours for dentin. CONCLUSIONS: The ablation experimental results show that the movement range and the resolution of the robotic system can meet the requirements of typical dental operations for tooth crown preparation. Also, the errors of tooth shape and preparation angle are able to satisfy the requirements of clinical crown preparation. Although the experimental results illustrate the potential of using picosecond lasers for 3D tooth crown preparation, many research issues still need to be studied before the system can be applied to clinical operations.

The Association Between Vitamin D and Early Childhood Caries: A Systematic Review and Meta-Analysis.

PURPOSE: Previous surveys have reported that children with vitamin D deficiency were likely to suffer from early childhood caries (ECC). The aim of this systematic review and meta-analysis was to determine 1. whether the status of vitamin D is intrinsically related to the occurrence of ECC and 2. the optimal level of vitamin D for the prevention of ECC. MATERIALS AND METHODS: The database of PubMed, Web of Science, Cochrane, Embase and Google scholar were searched for targeted literature. The eligibility criteria were observational studies in which children with ECC were compared to children without ECC in terms of their vitamin D status. Applying the Newcastle-Ottawa tool, study selection, data extraction, and risk of bias assessment were performed by 2 reviewers independently. Meta-analysis was performed using the Cochrane Collaboration's Review Manager 5.4 software. RESULTS: 501 articles were retrieved from the electronic databases; 11 studies were finally included in systematic review, 10 studies of which were submitted to meta-analysis. The 25(OH)D levels in the ECC group were statistically significantly lower compared with that in the caries-free group (WMD = -13.96, 95% CI: [-19.88,-8.03], p < 0.001), especially in regard to the association between S-ECC and vitamin D (WMD = -18.64, 95% CI: [-20.06,-17.22], p < 0.001). The subgroup analyses in terms of geographical region demonstrated that children with a level of 25(OH)D of 50-75 nmol/l were more likely to have ECC than those with over 75 nmol/l (OR = 1.42, 95% CI: [1.26,1.60], p < 0.001), with data from Asia and Europe combined for analysis Conclusions: The level of vitamin D was lower in children with ECC than in caries-free children, and the correlation between S-ECC and vitamin D was even stronger. The optimal 25(OH)D level for preventing occurrence and development of ECC was ≥ 75 nmol/l. Thus, clinicians should view the development of early caries also from a systemic perspective.

Preparation and Performance Evaluation of a Zinc Oxide-Graphene Oxideloaded Chitosan-Based Thermosensitive Gel.

This study aimed to develop and assess a chitosan biomedical antibacterial gel ZincOxide-GrapheneOxide/Chitosan/ß-Glycerophosphate (ZnO-GO/CS/ß-GP) loaded with nano-zinc oxide (ZnO) and graphene oxide (GO), known for its potent antibacterial properties, biocompatibility, and sustained drug release. ZnO nanoparticles (ZnO-NPs) were modified and integrated with GO sheets to create 1% and 3% ZnO-GO/CS/ß-GP thermo-sensitive hydrogels based on ZnO-GO to Chitosan (CS) mass ratio. Gelation time, pH, structural changes, and microscopic morphology were evaluated. The hydrogel's antibacterial efficacy against Porphyromonas gingivalis, biofilm biomass, and metabolic activity was examined alongside its impact (MC3T3-e1). The findings of this study revealed that both hydrogel formulations exhibited temperature sensitivity, maintaining a neutral pH. The ZnO-GO/CS/ß-GP formulation effectively inhibited P. gingivalis bacterial activity and biofilm formation, with a 3% ZnO-GO/CS/ß-GP antibacterial rate approaching 100%. MC3T3-e1 cells displayed good biocompatibility when cultured in the hydrogel extract.The ZnO-GO/CS/ß-GP thermo-sensitive hydrogel demonstrates favorable physical and chemical properties, effectively preventing P. gingivalis biofilm formation. It exhibits promising biocompatibility, suggesting its potential as an adjuvant therapy for managing and preventing peri-implantitis, subject to further clinical investigations.

Soft yet mechanically robust injectable alginate hydrogels with processing versatility based on alginate/hydroxyapatite hybridization.

The salient gelling feature of alginate via forming the egg-box structure with calcium ions has received extensive interests for different applications. Owing to the interfacial incompatibility of rigid inorganic solids with soft polymers, the requirement of overall stereocomplexation with calcium released from uniformly distributed solids in alginate remains a challenge. In this study, a novel alginate-incorporated calcium source was proposed to tackle the intractable dispersion for the preparation of injectable alginate hydrogels. Calcium phosphate synthesis in alginate solution yielded CaP-alginate hybrids as a calcium source. The physicochemical characterization confirmed the CaP-alginate hybrid was a nano-scale alginate-hydroxyapatite complex. The colloidally stable CaP-alginate hybrids were uniformly dispersed in alginate solutions even under centrifugation. The calcium-induced gelling of the CaP-alginate hybrids-loaded alginate solutions formed soft yet tough hydrogels including transparent sheets and knittable threads, confirming the homogeneous gelation of the hydrogel. The gelation time, injectability and mechanical properties of the hydrogels could be adjusted by changing preparation parameters. The prepared hydrogels showed uniform porous structure, excellent swelling, wetting properties and cytocompatibility, showing a great potential for applications in different fields. The present strategy with organic/inorganic hybridization could be exemplarily followed in the future development of functional hydrogels especially associated with the interface integration.

Functional study of a lytic polysaccharide monooxygenase MsLPMO3 from Morchella sextelata in the oxidative degradation of cellulose.

Lytic polysaccharide monooxygenases (LPMOs) can improve the effectiveness with which agricultural waste is utilized. This study described the potent AA9 family protein MsLPMO3, derived from Morchella sextelata. It exhibited strong binding to phosphoric acid swollen cellulose (PASC), and had the considerable binding ability to Cu2+ with a Kd value of 2.70 µM by isothermal titration calorimetry (ITC). MsLPMO3 could also act on PASC at the C1 carbon via MALDI-TOF-MS results. Moreover, MsLPMO3 could boost the hydrolysis efficiency of corncob and wheat bran in combination with glycoside hydrolases. MsLPMO3 also exhibited strong oxidizing ability for 2,6-dimethoxyphenol (2,6-DMP), achieving the best Vmax value of 443.36 U·g-1 for pH 7.4 with a H2O2 concentration of 300 µM. The structure of MsLPMO3 was obtained using AlphaFold2, and the molecular docking results elucidated the specific interactions and key residues involved in the recognition process between MsLPMO3 and cellulose. Altogether, this study expands the knowledge of AA9 family proteins in cellulose degradation, providing valuable insights into the mechanisms of synergistic degradation of lignocellulose with cellulases.

Different interventions and outcomes in four teeth with regenerative endodontic procedures in the same patient: A case report with 7­year follow­up.

The present study reported on the case of a 10-year-old male patient with four second premolar teeth undergoing regenerative endodontic procedures (REPs) for periapical periodontitis due to abnormal central cusp fracture, and the follow-up over 7 years. Annual follow-up clinical and radiographic examinations were performed to assess the effectiveness of treatment. After the initial RPEs, the apical inflammation of teeth #15 and #45 disappeared and their roots continued to develop. However, teeth #25 and #35 exhibited different signs of inflammation and were treated with calcium hydroxide apexification and the second REPs, respectively. Subsequently, the narrowing of the apical foramen and healing of periapical inflammation were observed. The root of tooth #35 continued to develop but still exhibited apical inflammation. In the present case, apexification with calcium hydroxide and the second REPs were used as alternative interventions for teeth that failed after REPs. However, interventional treatment after a failure was not able to predict outcomes, necessitating a further study with a large number of cases for observational description.

Ultrasonic assisted extraction of polyphenols from bayberry by deep eutectic supramolecular polymer and its application in bio-active film.

Ultrasound and deep eutectic supramolecular polymers (DESP) is a novel combination of green extraction method for phytochemicals. In this study, a new type of green extractant was developed: DESP. It is a derivative of deep eutectic solvent (DES) and was prepared by supramolecular polymer unit ß-cyclodextrin (ß-CD) as hydrogen bond acceptor (HBA) and organic acid as hydrogen bond donor (HBD). The current work focuses on the use of ultrasonic-assisted (UAE) DESP extraction of polyphenolic compounds (PCs) from bayberry. The experimental results showed that DESP synthesized with ß-CD and lactic acid (LA) in a ratio of 1:1 (w/w %) had the best extraction effect. And by using a three-level factor experiment and the response surface method, the predicted TPC content is very close to the actual content (28.85 ± 1.27 mg GAE/g). The DESP extract including PCs were further used as plasticizer for chitosan (CS) to prepare highly active green biofilms (DESP-CS). It is possible to reduce the tedious procedures for separating biologically active substances from DESP. The experiment proved that the prepared films have good mechanical properties, plastic deformation resistance, thermal stability and antioxidant activity.

Simulation of Postoperative Facial Appearances via Geometric Deep Learning for Efficient Orthognathic Surgical Planning.

Orthognathic surgery corrects jaw deformities to improve aesthetics and functions. Due to the complexity of the craniomaxillofacial (CMF) anatomy, orthognathic surgery requires precise surgical planning, which involves predicting postoperative changes in facial appearance. To this end, most conventional methods involve simulation with biomechanical modeling methods, which are labor intensive and computationally expensive. Here we introduce a learning-based framework to speed up the simulation of postoperative facial appearances. Specifically, we introduce a facial shape change prediction network (FSC-Net) to learn the nonlinear mapping from bony shape changes to facial shape changes. FSC-Net is a point transform network weakly-supervised by paired preoperative and postoperative data without point-wise correspondence. In FSC-Net, a distance-guided shape loss places more emphasis on the jaw region. A local point constraint loss restricts point displacements to preserve the topology and smoothness of the surface mesh after point transformation. Evaluation results indicate that FSC-Net achieves 15× speedup with accuracy comparable to a state-of-the-art (SOTA) finite-element modeling (FEM) method.

Physicochemical, Antibacterial Properties, and Compatibility of ZnO-NP/Chitosan/ß-Glycerophosphate Composite Hydrogels.

In this study we aimed to develop novel ZnO-NP/chitosan/ß-glycerophosphate (ZnO-NP/CS/ß-GP) antibacterial hydrogels for biomedical applications. According to the mass fraction ratio of ZnO-NPs to chitosan, mixtures of 1, 3, and 5% ZnO-NPs/CS/ß-GP were prepared. Using the test-tube inversion method, scanning electron microscopy and Fourier-transform infrared spectroscopy, the influence of ZnO-NPs on gelation time, chemical composition, and cross-sectional microstructures were evaluated. Adding ZnO-NPs significantly improved the hydrogel's antibacterial activity as determined by bacteriostatic zone and colony counting. The hydrogel's bacteriostatic mechanism was investigated using live/dead fluorescent staining and scanning electron microscopy. In addition, crystal violet staining and MTT assay demonstrated that ZnO-NPs/CS/ß-GP exhibited good antibacterial activity in inhibiting the formation of biofilms and eradicating existing biofilms. CCK-8 and live/dead cell staining methods revealed that the cell viability of gingival fibroblasts (L929) cocultured with hydrogel in each group was above 90% after 24, 48, and 72 h. These results suggest that ZnO-NPs improve the temperature sensitivity and bacteriostatic performance of chitosan/ß-glycerophosphate (CS/ß-GP), which could be injected into the periodontal pocket in solution form and quickly transformed into hydrogel adhesion on the gingiva, allowing for a straightforward and convenient procedure. In conclusion, ZnO-NP/CS/ß-GP thermosensitive hydrogels could be expected to be utilized as adjuvant drugs for clinical prevention and treatment of peri-implant inflammation.

A fully automatic AI system for tooth and alveolar bone segmentation from cone-beam CT images.

Accurate delineation of individual teeth and alveolar bones from dental cone-beam CT (CBCT) images is an essential step in digital dentistry for precision dental healthcare. In this paper, we present an AI system for efficient, precise, and fully automatic segmentation of real-patient CBCT images. Our AI system is evaluated on the largest dataset so far, i.e., using a dataset of 4,215 patients (with 4,938 CBCT scans) from 15 different centers. This fully automatic AI system achieves a segmentation accuracy comparable to experienced radiologists (e.g., 0.5% improvement in terms of average Dice similarity coefficient), while significant improvement in efficiency (i.e., 500 times faster). In addition, it consistently obtains accurate results on the challenging cases with variable dental abnormalities, with the average Dice scores of 91.5% and 93.0% for tooth and alveolar bone segmentation. These results demonstrate its potential as a powerful system to boost clinical workflows of digital dentistry.