Notopterol Inhibits the NF-κB Pathway and Activates the PI3K/Akt/Nrf2 Pathway in Periodontal Tissue.

Notopterol, an active component isolated from the traditional Chinese medicine Notopterygium incisum Ting ex H.T. Chang, exerts anti-inflammatory activity in rheumatoid arthritis. However, its roles in suppression of inflammatory insults and halting progression of tissue destruction in periodontitis remain elusive. In this study, we reveal that notopterol can inhibit osteoclastogenesis, thereby limiting alveolar bone loss in vivo. In vitro results demonstrated that notopterol administration inhibited synthesis of inflammatory mediators such as IL-1ß, IL-32, and IL-8 in LPS-stimulated human gingival fibroblasts. Mechanistically, notopterol inhibits activation of the NF-κB signaling pathway, which is considered a prototypical proinflammatory signaling pathway. RNA sequencing data revealed that notopterol activates the PI3K/protein kinase B (Akt)/NF-E2-related factor 2 (Nrf2) signaling pathway in LPS-stimulated human gingival fibroblasts, a phenomenon validated via Western blot assay. Additionally, notopterol treatment suppressed reactive oxygen species levels by upregulating the expression of antioxidant genes, including heme oxygenase 1 (HO-1), NAD(P)H quinone oxidoreductase 1 (NQO1), catalase (CAT), and glutathione reductase (GSR), indicating that notopterol confers protection against oxidative stress. Notably, inhibition of Akt activity by the potent inhibitor, MK-2206, partially attenuated both anti-inflammatory and antioxidant effects of notopterol. Collectively, these results raise the possibility that notopterol relieves periodontal inflammation by suppressing and activating the NF-κB and PI3K/AKT/Nrf2 signaling pathways in periodontal tissue, respectively, suggesting its potential as an efficacious treatment therapy for periodontitis.

Lipoxin A4 levels predict site-specific clinical improvements post scaling and root planing and correlate negatively with periodontal pathogens in severe periodontitis.

BACKGROUND: Serving as a stop signal of inflammation, the role of lipoxin A4 (LXA4) in periodontitis remains to be clarified. This study is aimed to examine the changes in LXA4 levels in gingival crevicular fluid (GCF) after scaling and root planing (SRP) and to determine the relationship between LXA4 levels and treatment outcomes and periodontal pathogens in severe periodontitis. METHODS: A total of 74 GCF samples were collected from 21 severe periodontitis participants at the deepest affected sites. These sites were re-sampled at 1, 3, and 6 months after SRP. Besides, GCF samples were also collected from 25 periodontally healthy participants. Clinical parameters including probing depth (PD) and clinical attachment level (CAL) in periodontitis group were recorded. LXA4 levels and periodontal pathogens in the GCF were analyzed by ELISA and PCR, respectively. Correlations between GCF LXA4 levels and treatment effect and periodontal pathogens were assessed. RESULTS: LXA4 levels in GCF significantly increased after SRP (p < 0.05), but remained lower than those observed in healthy individuals (p < 0.05). Sites with lower baseline LXA4 concentrations were more likely to experience greater improvements in PD at 6 months post-SRP (area under the curve [AUC] = 0.792), and the improvements were positively correlated with the increase of LXA4 at these sites post-treatment (p < 0.05). Furthermore, more elevated LXA4 levels were observed in sites that became negative for Prevotella intermedia or Tannerella forsythia after SRP. CONCLUSION: Baseline LXA4 in GCF has the potential to predict the site-specific response of severe periodontal lesions to SRP. The increase of LXA4 levels after treatment was positively correlated with clinical improvements and negatively correlated with the presence of Prevotella intermedia or Tannerella forsythia.

Loss of ß-catenin causes cementum hypoplasia by hampering cementogenic differentiation of Axin2-expressing cells.

BACKGROUND AND OBJECTIVE: Although cementum plays an essential role in tooth attachment and adaptation to occlusal force, the regulatory mechanisms of cementogenesis remain largely unknown. We have previously reported that Axin2-expressing (Axin2+ ) mesenchymal cells in periodontal ligament (PDL) are the main cell source for cementum growth, and constitutive activation of Wnt/ß-catenin signaling in Axin2+ cells results in hypercementosis. Therefore, the aim of the present study was to further evaluate the effects of ß-catenin deletion in Axin2+ cells on cementogenesis. MATERIALS AND METHODS: We generated triple transgenic mice to conditionally delete ß-catenin in Axin2-lineage cells by crossing Axin2CreERT2/+ ; R26RtdTomato/+ mice with ß-cateninflox/flox mice. Multiple approaches, including X-ray analysis, micro-CT, histological stainings, and immunostaining assays, were used to analyze cementum phenotypes and molecular mechanisms. RESULTS: Our data revealed that loss of ß-catenin in Axin2+ cells led to a cementum hypoplasia phenotype characterized by a sharp reduction in the formation of both acellular and cellular cementum. Mechanistically, we found that conditional removal of ß-catenin in Axin2+ cells severely impaired the secretion of cementum matrix proteins, for example, bone sialoprotein (BSP), dentin matrix protein 1 (DMP1) and osteopontin (OPN), and markedly inhibited the differentiation of Axin2+ mesenchymal cells into osterix+ cementoblasts. CONCLUSIONS: Our findings confirm the vital role of Axin2+ mesenchymal PDL cells in cementum growth and demonstrate that Wnt/ß-catenin signaling shows a positive correlation with cementogenic differentiation of Axin2+ cells.

A transfersomes hydrogel patch for cutaneous delivery of propranolol hydrochloride: formulation, in vitro, ex vivo and in vivo studies.

OBJECTIVE: In this work, a propranolol hydrochloride (PRH) transfersomes loaded cutaneous hydrogel patch was developed for topical drug delivery in the affected area of infantile haemangioma. METHODS: Sodium cholate was used as the edge activator to prepare the transfersomes. Based on the central composite design, transfersomes hydrogel patch formulation was optimised with 48 h cumulative penetration and time lag as response values. Particle sizes and morphology of the prepared transfersomes were assessed. They were loaded in a cutaneous hydrogel patch, after which their skin permeation abilities were evaluated, and histopathological effects were investigated using guinea pigs. Moreover, in vivo pharmacokinetics studies were performed in rats. RESULTS: The transfersomes system had a encapsulation efficiency of 81.84 ± 0.53%, particle size of 186.8 ± 3.38 nm, polydispersity index of 0.186 ± 0.002, and a zeta potential of -28.6 ± 2.39 mV. Transmission electron microscopy images revealed sphericity of the particles. The ex vivo drug's penetration of the optimised transfersomes hydrogel patch was 111.05 ± 11.97 µg/cm2 through rat skin within 48 h. Assessment of skin tissue did not reveal any histopathological alterations in epidermal and dermal cells. Pharmacokinetic studies showed that skin Cmax (68.22 µg/cm2) and AUC0-24 (1007.33 µg/cm2 × h) for PRH transfersomes hydrogel patch were significantly higher than those of commercially available oral dosage form and hydrogel patch without transfersomes. These findings imply that the transfersomes hydrogel patch can prolong drug accumulation in the affected skin area, and reduce systemic drug distribution via the blood stream. CONCLUSIONS: The hydrogel patch-loaded PRH transfersomes is a potentially useful drug formulation for infantile haemangioma.

Four-Dimensional Printing and Shape Memory Materials in Bone Tissue Engineering.

The repair of severe bone defects is still a formidable clinical challenge, requiring the implantation of bone grafts or bone substitute materials. The development of three-dimensional (3D) bioprinting has received considerable attention in bone tissue engineering over the past decade. However, 3D printing has a limitation. It only takes into account the original form of the printed scaffold, which is inanimate and static, and is not suitable for dynamic organisms. With the emergence of stimuli-responsive materials, four-dimensional (4D) printing has become the next-generation solution for biological tissue engineering. It combines the concept of time with three-dimensional printing. Over time, 4D-printed scaffolds change their appearance or function in response to environmental stimuli (physical, chemical, and biological). In conclusion, 4D printing is the change of the fourth dimension (time) in 3D printing, which provides unprecedented potential for bone tissue repair. In this review, we will discuss the latest research on shape memory materials and 4D printing in bone tissue repair.

High porosity 3D printed titanium mesh allows better bone regeneration.

BACKGROUND: Most patients with insufficient bone mass suffer from severe horizontal or vertical bone defects in oral implant surgery. The purpose of this study was to compare the bone regeneration effects of titanium meshes with different porosity in the treatment of bone defects. METHODS: Nine beagle dogs were equally divided into three groups based on execution time. Three months after the extraction of the first to fourth premolars of the mandible, three bone defects were randomly made in the mandible. Bone particles and three kinds of three-dimensional (3D) printed titanium nets with different porosities (low porosity group (LP), 55%; medium porosity group (MP), 62%; and high porosity group (HP), 68%) were replanted in situ. The beagles were killed 4, 8, and 12 weeks after surgery. Formalin-fixed specimens were embedded in acrylic resin. The specimens were stained with micro-CT, basic fuchsin staining, and toluidine blue staining. RESULTS: Micro-CT analysis showed that the trabecular thickness, trabecular number, and bone volume fraction of the HP group were higher than those of the other two groups. Moreover, the trabecular separation of the HP group decreased slightly and was lower than that of the MP and LP groups. Histological staining analysis showed that the trabecular number in the HP group was higher than in the other two groups at 8 and 12 weeks, and the bone volume fraction of the HP was higher than that in the other two groups at 12 weeks. Moreover, the trabecular thickness of the MP was higher than that of the LP group at 12 weeks and the trabecular separation was lower in the HP group at 4 and 8 weeks. The differences were statistically significant (p < 0.05). CONCLUSION: A 3D printed titanium mesh with HP in a certain range may have more advantages than a titanium mesh with LP in repairing large bone defects.

Discoidin domain receptors (DDRs): Potential implications in periodontitis.

Periodontitis is a chronic inflammatory disease leading to the destruction of periodontal tissues associated with high prevalence and significant economic burden. As special collagen-binding tyrosine kinase receptors, the discoidin domain receptors (DDRs) can control cell migration, adhesion, proliferation, and extracellular matrix remodeling. DDRs are constitutively expressed and widely distributed in periodontal tissues which are rich in collagen. Ddr1/2 knockout mice showed significant periodontal defects including connective tissue destruction, alveolar bone loss, and even tooth loss. It has been demonstrated that bone homeostasis, inflammation, matrix metalloproteinases, and autophagy are crucial characteristics involved in the pathogenesis of periodontitis. Of note, DDRs have been reported to participate in the above pathophysiological processes, implicating the potential roles of DDRs in periodontitis. In this review article, we aim to illustrate the possible roles of DDRs in periodontitis in an attempt to explore their potential value as therapeutic targets for periodontitis.

Mechanically Robust and Flame-Retardant Superhydrophobic Textiles with Anti-Biofouling Performance.

The attachment of bio-fluids to surfaces promotes the transmission of diseases. Superhydrophobic textiles may offer significant advantages for reducing the adhesion of bio-fluids. However, they have not yet found widespread use because dried remnants adhere strongly and have poor mechanical or chemical robustness. In addition, with the massive use of polymer textiles, features such as fire and heat resistance can reduce the injuries and losses suffered by people in a fire accident. We developed a superhydrophobic textile covered with a hybrid coating of titanium dioxide and polydimethylsiloxane (TiO2/PDMS). Such a textile exhibits low adhesion to not only bio-fluids but also dry blood. Compared to a hydrophilic textile, the peeling force of the coated textile on dried blood is 20 times lower. The textile's superhydrophobicity survives severe treatment by sandpaper (400 mesh) at high pressure (8 kPa) even if some of its microstructures break. Furthermore, the textile shows excellent heat resistance (350 °C) and flame-retardant properties as compared to those of the untreated textile. These benefits can greatly inhibit the flame spread and reduce severe burns caused by polymer textiles adhering to the skin when melted at high temperatures.

Microfluidic synthesis of Janus-structured QD-encoded magnetic microbeads for multiplex immunoassay.

Uniform and monodisperse quantum dot (QD)-encoded magnetic microbeads with Janus structure were produced in a microfluidic device via photopolymerization. UV light through a microscope objective was used to solidify the microbeads which showed sharp interfaces and excellent magnetic responses. QDs with different emission peaks (450 nm for blue and 640 nm for red) were mixed at different ratios to provide three spectral codes. The QD-encoded microbeads can be distinguished by analyzing their fluorescent images in HSV color space. After hydrolysis of the anhydride group in alkaline solution, protein was immobilized on microbeads via activation of carboxyl groups using (1-ethyl-3(3-dimethylaminoprophyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS). A microhole array in polydimethylsiloxane (PDMS) substrates with a specific size was fabricated to trap individual microbeads in a single microhole. The combination of Janus-structured QD-encoded magnetic microbeads and microhole arrays facilitates both flexibility, binding kinetics, sensitivity for suspension assay, and fluorescence mapping analysis for conventional biochips, thus providing a novel platform for multiplex bioanalysis. The capability of this integration for multiplex immunoassays was verified using three kinds of IgG and their corresponding anti-IgG. A detection limit of 0.07 ng/mL was achieved for human IgG, indicating practical applications in various fields.

Vaccination coverage estimates and utilization patterns of inactivated enterovirus 71 vaccine post vaccine introduction in Ningbo, China.

BACKGROUND: In China, enterovirus 71 (EV71) is the major etiological agents of hand foot mouth disease that poses severe risks to children's health. Since 2015, three inactivated EV71 vaccines have been approved for use. Previous studies indicated the high willingness of EV71 vaccination in eastern China. However, few studies have assessed coverage and utilization patterns of EV71 vaccine in China. METHODS: Children born during 2012-2018 were sampled and their records were abstracted from Ningbo childhood immunization information management system. Descriptive statistics characterized the study population and assessed coverage and timeliness for EV71 vaccination. Simultaneous administration patterns as well as type of EV71 vaccine used were also evaluated. Bivariate and multivariable analysis was used to examine the relationship of socio-demographic characteristics with vaccination coverage and timeliness. RESULTS: Of 716,178 children living in Ningbo. One hundred seventy-two thousand two hundred thirty-six received EV71 vaccine with a coverage rate of 24.05% and only 8.61% received vaccination timely. 21.97% of children received the complete two dose EV71 series but only 6.49% completed timely. Vaccination coverage and timeliness increased significantly from 2012 birth cohort to 2018 birth cohort. Relatively higher coverage and timeliness were observed in resident children, Inner districts, high socioeconomic areas and large-scaled immunization clinics. Of 329,569 doses of EV71 vaccine, only 5853(1.78%) doses were administered at the same day as other vaccines. CONCLUSIONS: There is a need for increasing EV71 vaccination coverage and timeliness as well as eliminating disparities among different populations. Our study highlights the importance of simultaneous administration to increasing coverage and timeliness of EV71 vaccination.

In vitro antibacterial activity and cytocompatibility of magnesium-incorporated poly(lactide-co-glycolic acid) scaffolds.

BACKGROUND: Bone defects are often combined with the risk of infection in the clinic, and artificial bone substitutes are often implanted to repair the defective bone. However, the implant materials are carriers for bacterial growth, and biofilm can form on the implant surface, which is difficult to eliminate using antibiotics and the host immune system. Magnesium (Mg) was previously reported to possess antibacterial potential. METHODS: In this study, Mg was incorporated into poly(lactide-co-glycolic acid) (PLGA) to fabricate a PLGA/Mg scaffold using a low-temperature rapid-prototyping technique. All scaffolds were divided into three groups: PLGA (P), PLGA/10 wt% Mg with low Mg content (PM-L) and PLGA/20 wt% Mg with high Mg content (PM-H). The degradation test of the scaffolds was conducted by immersing them into the trihydroxymethyl aminomethane-hydrochloric acid (Tris-HCl) buffer solution and measuring the change of pH values and concentrations of Mg ions. The antibacterial activity of the scaffolds was investigated by the spread plate method, tissue culture plate method, scanning electron microscopy and confocal laser scanning microscopy. Additionally, the cell attachment and proliferation of the scaffolds were evaluated by the cell counting kit-8 (CCK-8) assay using MC3T3-E1 cells. RESULTS: The Mg-incorporated scaffolds degraded and released Mg ions and caused an increase in the pH value. Both PM-L and PM-H inhibited bacterial growth and biofilm formation, and PM-H exhibited higher antibacterial activity than PM-L after incubation for 24 and 48 h. Cell tests revealed that PM-H exerted a suppressive effect on cell attachment and proliferation. CONCLUSIONS: These findings demonstrated that the PLGA/Mg scaffolds possessed favorable antibacterial activity, and a higher content of Mg (20%) exhibited higher antibacterial activity and inhibitory effects on cell attachment and proliferation than low Mg content (10%).

The combined use of salivary biomarkers and clinical parameters to predict the outcome of scaling and root planing: A cohort study.

AIM: To explore the application of the combined use of baseline salivary biomarkers and clinical parameters in predicting the outcome of scaling and root planing (SRP). MATERIALS AND METHODS: Forty patients with advanced periodontitis were included. Baseline saliva samples were analysed for interleukin-1ß (IL-1ß), matrix metalloproteinase-8 and the loads of Porphyromonas gingivalis, Prevotella intermedia, Aggregatibacter actinomycetemcomitans and Tannerella forsythia. After SRP, pocket closure and further attachment loss at 6 months post-treatment were chosen as outcome variables. Models to predict the outcomes were established by generalized estimating equations. RESULTS: The combined use of baseline clinical attachment level (CAL), site location and IL-1ß (area under the curve [AUC] = 0.764) better predicted pocket closure than probing depth (AUC = 0.672), CAL (AUC = 0.679), site location (AUC = 0.654) or IL-1ß (AUC = 0.579) alone. The combination of site location, tooth loss, percentage of deep pockets, detection of A. actinomycetemcomitans and T. forsythia load (AUC = 0.842) better predicted further clinical attachment loss than site location (AUC = 0.715), tooth loss (AUC = 0.530), percentage of deep pockets (AUC = 0.659) or T. forsythia load (AUC = 0.647) alone. CONCLUSION: The combination of baseline salivary biomarkers and clinical parameters better predicted SRP outcomes than each alone. The current study indicates the possible usefulness of salivary biomarkers in addition to tooth-related parameters in predicting SRP outcomes.

Incorporation of nanosized calcium silicate improved osteointegration of polyetheretherketone under diabetic conditions.

Diabetes can impair osteoblastic functions and negatively interfere with osteointegration at the bone/implant interface. Previously, we prepared a nanosized calcium silicate (CS) incorporated-polyetheretherketone (PK) biocomposite (CS/PK) and found that the CS/PK composite exhibited enhanced osteoblast functions in vitro and osteointegration in vivo, but its bioperformance under diabetic conditions remained elusive. In this study, MC3T3-E1 cells incubated on CS/PK and PK samples were subjected to diabetic serum (DS) and normal serum (NS); cell attachment, morphology, spreading, proliferation, and osteogenic differentiation were compared to assess in vitro osteoblastic functions on the surfaces of different materials. An in vivo test was performed on diabetic rabbits implanted with CS/PK or PK implants into the cranial bone defect to assess the osteointegration ability of the implants. In vitro results showed that diabetes inhibited osteoblastic functions evidenced by impaired morphology and spreading, and decreased attachment, proliferation, and osteogenic differentiation compared with the findings under normal conditions. Notably, CS/PK ameliorated osteoblastic disfunction under diabetic conditions in vitro. In vivo results from micro-CT and histologic examinations revealed that rabbits with CS/PK implants exhibited improved osteointegration at the bone/implant interface under diabetic conditions compared with PK. Therefore, the CS/PK composite improved the impaired osteointegration induced by diabetes and is a promising orthopedic or craniofacial implant material that may obtain good clinical performance in diabetic patients.

Superior CO2 uptake on nitrogen doped carbonaceous adsorbents from commercial phenolic resin.

In this study, N-doped porous carbons were produced with commercial phenolic resin as the raw material, urea as the nitrogen source and KOH as the activation agent. Different from conventional carbonization-nitriding-activation three-step method, a facile two-step process was explored to produce N-incorporated porous carbons. The as-obtained adsorbents hold superior CO2 uptake, i.e. 5.01 and 7.47 mmol/g at 25 °C and 0 °C under 1 bar, respectively. The synergistic effects of N species on the surface and narrow micropores of the adsorbents decide their CO2 uptake under 25 °C and atmospheric pressure. These phenolic resin-derived adsorbents also possess many extremely promising CO2 adsorption features like good recyclability, quick adsorption kinetics, modest heat of adsorption, great selectivity of CO2 over N2 and outstanding dynamic adsorption capacity. Cheap precursor, easy preparation strategy and excellent CO2 adsorption properties make these phenolic resin-derived N-doped carbonaceous adsorbents highly promising in CO2 capture.

Formation of a Monolayer Protein Corona around Polystyrene Nanoparticles and Implications for Nanoparticle Agglomeration.

Nanoparticle (NP) interactions with cells and organisms are mediated by a biomolecular adsorption layer, the so-called "protein corona." An in-depth understanding of the corona is a prerequisite to successful and safe application of NPs in biology and medicine. In this work, earlier in situ investigations on small NPs are extended to large polystyrene (PS) NPs of up to 100 nm diameter, using human transferrin (Tf) and human serum albumin (HSA) as model proteins. Direct NP sizing experiments reveal a reversibly bound monolayer protein shell (under saturating conditions) on hydrophilic, carboxyl-functionalized (PS-COOH) NPs, as was earlier observed for much smaller NPs. In contrast, protein binding on hydrophobic, sulfated (PS-OSO3 H) NPs in solvent of low ionic strength is completely irreversible; nevertheless, the thickness of the observed protein corona again corresponds to a protein monolayer. Under conditions of reduced charge repulsion (higher ionic strength), the NPs are colloidally unstable and form large clusters below a certain protein-NP stoichiometric ratio, indicating that the adsorbed proteins induce NP agglomeration. This comprehensive characterization of the persistent protein corona on PS-OSO3 H NPs by nanoparticle sizing and quantitative fluorescence microscopy/nanoscopy reveals mechanistic aspects of molecular interactions occurring during exposure of NPs to biofluids.

Novel Strategy of Gene Delivery System Based on Dendrimer Loaded Recombinant Hirudine Plasmid for Thrombus Targeting Therapy.

This study proposed a new nonviral gene delivery system for thrombus targeting therapy based on PEGlyation polyamides dendrimer (PAMAM) modified with RGDyC to condense the pDNA with recombinant hirudine (rHV) gene (RGDyC-rHV-EGFP). The RGDyC-mPEG-PAMAM was synthesized and characterized by 1H NMR, PAMAM/pDNA was characterized by particle size, zeta potential, cellular uptake, and gel retraction assay. The transfection was carried out between lipofectamine 2000 and PAMAM/pDNA on HUVEC cells at various N/P ratios. The antithrombotic effect in vivo was evaluated by venous thrombosis model on Wistar rats. It showed that the drug delivery system of RGDyC modified PAMMA, which entrapped pDNA could significantly improve the transfection efficiency. It was about 7.56-times higher than that of lipofectamine 2000. In addition, the expression level of hirudine fusion protein was the highest at N/P ratio of 0.5. The results of antithrombotic effect showed that the weight of thrombus was reduced in RGDyC modified group; compared with heparin group, there was no significant difference ( P > 0.05). Overall, we take the advantage of the unique advantages of hirudine, combining the genetic engineering, nanocarriers, and targeting technology, to achieve the targeted enrichment and activation the hirudine fusion protein in the thrombus site, to improve the concentration of drugs in the thrombus site, finally increasing the curative effect and reduce the risk of bleeding. The strategy of gene delivery system holds unique properties as a gene delivery system and has great promises in thrombus targeting therapy.

The role of osteomodulin on osteo/odontogenic differentiation in human dental pulp stem cells.

BACKGROUND: Extracellular matrix secretion and odontoblastic differentiation in human dental pulp stem cells (hDPSCs) are the cellular bases for reparative dentinogenesis. Osteomodulin (OMD) is a member of the small leucine-rich proteoglycan family distributed in the extracellular matrix but little is known about its role in osteo/odontogenic differentiation. The objective of this study was to investigate the role of OMD during osteo/odontoblastic differentiation of hDPSCs. METHODS: hDPSCs were selected using immune-magnetic beads and their capability of multi-differentiation was identified. OMD knockdown was achieved using short hairpin RNA (shRNA) lentivirus and was confirmed by western blot. Gene expression was measured by real-time qPCR and osteo/odontoblastic differentiation of hDPSCs was determined by alizarin red S staining. RESULTS: Compared with uninduced cells, the transcription of OMD was up-regulated by 35-fold at the late stage of osteo/odontogenic differentiation. shRNA-mediated gene silencing of OMD decreased the expression of odontoblastic genes, such as alkaline phosphatase (ALP), dentin matrix acidic phosphoprotein 1 (DMP1) and dentin sialophosphoprotein (DSPP). Besides, knockdown of OMD attenuated the mineralized nodules formation induced by osteo/odontogenic medium. CONCLUSIONS: These results implied that OMD may play a pivotal role in modulating the osteo/odontoblastic differentiation of hDPSCs.

[Preparation process of norcantharidin/tetrandrine dual loaded liposomes and their in vitro release characteristics].

In order to optimize the prescription and preparation process of norcantharidin/tetrandrine dual loaded liposomes, the dual drug loaded liposomes were prepared by film dispersion-ultrasonic method using norcantharidin-mesoporous silica nanoparticles（MSN-NCTD）and tetrandrine（Tet）. With particle size and encapsulation efficiency as comprehensive indexes, the influences of phospholipid cholesterol amount, ultrasonic time and ultrasonic power on prescription process were investigated by orthogonal test; the in vitro release characteristics of liposomes were investigated by dialysis method. The results indicated that the best prescription process of prepared norcantharidin/tetrandrine dual loaded liposomes was as follows: phospholipid-cholesterol ratio 2.5:1, ultrasonic time 4 min, ultrasonic power 40%; the encapsulation efficiency was 86.62% and 79.19%respectively for NCTD and Tet;liposomes were well-shaped under the transmission microscope, with average particle size of （207.5±3.6） nm, Zeta potential of （1.345±0.173） mV; and the 48 h cumulative release rates of NCTD and Tet were 85.14% and 85.00% respectively. The experiment results proved that the dual drug loaded liposomes prepared by film dispersion-ultrasonic method had uniform particle size, high encapsulation efficiency and in vitro sustained release characteristics.

[Preparation and in vitro evaluation of arsenic trioxide glioma targeting drug delivery system loaded by PAMAM dendrimers co-modified with RGDyC and PEG].

Arsenic trioxide (ATO) is an effective component of traditional Chinese medicine arsenic. The existing studies have shown its good inhibition and apoptosis ability on a variety of tumours. However, its toxicity and difficulties in the permeability into the blood brain barrier (BBB) has the limitation in the application of glioma treatment. Polyamide-amine dendrimer (PAMAM) is a synthetic polymer with many advantages, such as a good permeability, stability and biocompatibility. Additionally, the 5th generation of PAMAM is an ideal drug carrier due to its three-dimensional structure. In this study, the 5th generation of PAMAM co-modified with RGDyC and PEG, then confirmed by ¹H-NMR. The average particle size of nanoparticles was about 20 nm according to the nanoparticle size-potential analyser and transmission electron microscopy. in vitro release showed that the nanocarrier not only has the sustained release effect, but also some pH-sensitive properties. The cell results showed that PAMAM co-modified with RGDyC and PEGAM has a lower cytotoxicity than the non-modified group in vitro. Accordingly, the drug delivery system has a better anti-tumour effect across the blood brain barrier (BBB) in vitro, which further proves the tumour targeting of RGDyC.

Influences of pH and Iron Concentration on the Salivary Microbiome in Individual Humans with and without Caries.

This study aimed to identify the differences in the oral microbial communities in saliva from patients with and without caries by performing sequencing with the Illumina MiSeq platform, as well as to further assess their relationships with environmental factors (salivary pH and iron concentration). Forty-three volunteers were selected, including 21 subjects with and 22 without caries, from one village in Gansu, China. Based on 966,255 trimmed sequences and clustering at the 97% similarity level, 1,303 species-level operational taxonomic units were generated. The sequencing data for the two groups revealed that (i) particular distribution patterns (synergistic effects or competition) existed in the subjects with and without caries at both the genus and species levels and (ii) both the salivary pH and iron concentration had significant influences on the microbial community structure. IMPORTANCE: The significant influences of the oral environment observed in this study increase the current understanding of the salivary microbiome in caries. These results will be useful for expanding research directions and for improving disease diagnosis, prognosis, and therapy.