Ozone therapy effect in medication-related osteonecrosis of the jaw as prevention or treatment: microtomographic, confocal laser microscopy and histomorphometric analysis.

OBJECTIVE: This study aimed to evaluate the efficacy of ozone therapy in the preoperative (prevention) and/or postoperative (treatment) of MRONJ. MATERIAL AND METHODS: Forty male Wistar rats were caudally treated with zoledronic acid (ZOL) and to ozone therapy before extraction (prevention, POG), after extraction (treatment, TOG), or both (prevention and treatment, TPOG), and treated with saline (SAL). The animals received intramuscular fluorochrome (calcein and alizarin), and 28 days postoperatively, they were euthanized, and the tissues were subjected to microtomographic computed tomography (microCT), LASER confocal, and histomorphometric analyses. RESULTS: Micro-CT showed a higher bone volume fraction average in all groups than that in the ZOL group (P < 0.001), the ZOL group showed high porosity (P = 0.03), and trabecular separation was greater in the TOG group than in the POG group (P < 0.05). The mineral apposition rate of the POG group was high (20.46 ± 6.31) (P < 0.001), followed by the TOG group (20.32 ± 7.4). The TOG group presented the highest mean newly formed bone area (68.322 ± 25.296) compared with the ZOL group (P < 0.05), followed by the SAL group (66.039 ± 28.379) and ZOL groups (60.856 ± 28.425). CONCLUSIONS: Ozone therapy modulated alveolar bone repair in animals treated with ZOL, mainly after surgery trauma, leading to bone formation as healing tissue. CLINICAL RELEVANCE: Osteonecrosis has been a challenge in dentistry, and owing to the lack of a consensus regarding therapy, studies presenting new therapies are important, and ozone has been one of the therapies explored empirically.

Mechanical Comparison of Four Different Types of Osteosynthesis in a 11-mm Advancement Le Fort I Osteotomy.

OBJECTIVE: This study aimed to evaluate 4 methods of osteosynthesis in the maxilla after a linear advance of 11 mm. METHODOLOGY: Le Fort I osteotomies were performed on 24 resin models and different osteosynthesis were applied in the anterior region. Group I received Lindorf plates; group II, modified Lindorf plates; group III, inverted "T" plates; and group IV, "L" plates. All groups received "L" plates in the posterior region. Analysis were performed through universal mechanical testing machine with an axial linear load until 5-mm displacement. The data obtained about the force and the amount of deformation were computed, thus the energy required for displacement and stiffness was calculated. Statistical analysis was performed using 2-way analysis (Shapiro-Wilk, followed by Holm-Sidak) (P  < 0.05). RESULTS: Groups I and II showed greater resistance to displacement (P < 0.05) than the other groups. The largest amount of maximum force exerted for the 5-mm displacement was in group II (91.73 N), followed by group I (87.46 N), presenting the best values in comparison with the other groups (P < 0.001). Group III had less stiffness (P < 0.001) than the other groups. CONCLUSIONS: The use of preclinical methodologies to verify the mechanical stability of fixation models allows a prediction in the choice of greater resistance systems. The fixation type with greater resistance to deformation was achieved with modified Linford plates followed by Linford plates in the anterior region and plate "L" bilaterally in the posterior region.

Strategy for Optimizing Airway Volume With Genioglossal Advancement Using Cutting Guide in the Treatment of Obstructive Sleep Apnea.

The genioglossus advancement muscle is a technique used to treat obstructive sleep apnea and depends on the precise location of the muscle insertion into the geniotubercle. The aim of this article was to present a case report about a 38-year-old male patient with obstructive sleep apnea even after undergoing uvulopalatopharyngoplasty and mentoplasty. A maxillo-mandibular advancement and genioglossus was proposed, for this a virtual planning of the surgical guide was done using a specialized software. The great advantage is to reduce the osteotomy by focusing precisely on the insertion of the muscle. The cutting guide facilitated the surgical procedure in all aspects and brought safety.

Retrieval of a Broken Dental Needle Close to the Facial Artery After Cervical Migration.

Use of imaging tools like digital C-arm, tridimensional tomography, and navigational surgery has proven its value to the surgical removal of broken needles. A 32-year-old patient was referred for evaluation of a fractured needle during inferior alveolar nerve block attempt few days before. The patient complained of a pricking sensation at the injured area while moving the neck. A contrasted computed tomography was performed for further evaluation of the needle toward the vascular network of the neck, showing a close location by the left facial artery, parallel to the styloid process of the temporal bone. The needle was then released from the underlying tissues and retrieved. Although considered a rare intercurrence, there are still reports of breaking needles during dental anesthesia. Such reports are almost always related to inferior alveolar nerve blocks, associated with the use of short, thin needles, and after multiple bending movements before the insertion of the needle in the tissues. Accurate image examinations such as contrasted computed tomography are of great importance for planning the surgical removal, especially in patients of migration next to important vessels of the neck.

Evaluation of calcium hydroxide mixed with propolis by ultrasonic activation as root canal dressing in delayed tooth replantation.

Background: In cases of tooth avulsion, in which the neurovascular bundle responsible for nourishing the dental pulp is break, endodontic treatment is necessary before proceeding with tooth replantation. In this process, various substances have been tested in combination with calcium hydroxide Ca(OH)2 in an attempt to improve its effectiveness. This study aimed to examine the effects of using a mixture of Ca(OH)2 and 10% propolis, with subsequent application of ultrasonic treatment, on the delayed replantation of teeth in rats. Material and Methods: Twenty-four rats underwent a surgical procedure to extract the upper right incisor, leaving it on a surface to dry for one hour. The pulp and periodontal ligament were removed and the teeth were submerged in a 2% sodium fluoride acidulated phosphate solution. The canals were dehydrated using paper cones and the teeth were divided into four groups, according to the type of intracanal dressing: Ca(OH)2 group, Ca(OH)2 group with ultrasonic agitation, Ca(OH)2 and propolis group, Ca(OH)2 and propolis group with ultrasonic agitation. The root canals were irrigated with saline solution and the teeth were reimplanted. Sixty days after reimplantation, the animals were euthanized. Results: With regard to the presence of acute and chronic inflammatory infiltrate in the periodontal ligament, there was no statistically significant difference among some of the groups. Root resorption was identified in all groups, and there was no significant difference between them. Conclusions: It is concluded that the application of intracanal dressing containing Ca(OH)2 associated with 10% propolis, followed by ultrasonic agitation, did not prove to be more effective than the use of Ca(OH)2 alone in the repair process in the delayed replantation of rat teeth. Key words:Tooth replantation, Calcium hydroxide, Propolis, Ultrasound, Intracanal dressing.

The success rate of immediate implant placement of mandibular molars: a clinical and radiographic retrospective evaluation between 2 and 8 years.

BACKGROUND: Dental implants, indicated for re-establishing both mastigatory and aesthetic functions, can be placed in the sockets immediately after tooth extraction. Most studies investigate the anterior and upper regions of the dental arch, whereas few examine longitudinal appraisal of immediate implant installation in the mandibular molar region. OBJECTIVE: The aim of this retrospective study was to evaluate the success rate of immediate dental implants placement in mandibular molars within a follow-up period as long as 8 years. MATERIALS AND METHODS: Seventy-four mandibular molar implants after non-traumatic tooth extraction between 2002 and 2008 were examined in the study. All implants were evaluated radiographically immediately after prosthesis placement, 1 year after implantation, and by the end of the experimental period, in 2010. Clinical evaluation was done according to [Albrektsson et al. (1986) The International Journal of Oral & Maxillofacial Implants, 1, 11-25] success criteria for marginal bone loss. The mean bone losses, calculated as the difference between the final evaluation measures and those taken by the end of the first year of implant, were compared using Kruskal-Wallis test with a significance level of 5%. RESULTS: All implants presented clinical and radiographic stable conditions, that is, 100% success rate. Significant bone loss was not found between final evaluation and that of the first functional year (P > 0.05). CONCLUSION: Immediate implant placement of mandibular molars proved to be a viable surgical treatment given the high success rate up to 8 years after implantation.

Intraoral approach to zygomatic fracture: modified technique for infraorbital rim fixation.

The intraoral approach to zygomatic fracture treatment was introduced by Keen in 1909. This technique allows both an adequate visualization of the zygomaticomaxillary buttress and intraoral reduction of zygomatic arch fractures. Similar techniques have been published over the last 30 years. The aim of this study was to describe a modification of the Keen technique that promotes adequate visualization of the infraorbital rim and permits reduction and fixation of this region in cases of zygomatic fractures. The present technique has several advantages such as that (a) only 1 incision is necessary to approach the zygomaticomaxillary buttress and infraorbital rim, (b) it optimizes surgical time, and (c) it avoids periorbital scars.

Planning for immediate loading of implant-supported prostheses: literature review.

The aim of this study was to present the factors that influence planning for immediate loading of implants through a literature review for treatment success. Research was conducted in the PubMed database including the key words immediate implant loading, implant-supported prostheses, and implant planning for studies published from 2000 to 2011. Forty-eight articles were used in this review to describe the indications and counterindications, presurgical planning, and technologies available for planning of this treatment alternative.

Dental implants in patients with osteoporosis: a clinical reality?

Osteoporosis is a systemic disorder characterized by generalized decrease in bone mineral density. Dental implantology is a specialty with high predictability when both quantity and quality of the bone are respected. Therefore, the diagnosis and the implant treatment in patients with osteoporosis are important. In the current study, a literature review about osteoporosis and dental implant therapy was conducted. PubMed, Cochrane, ISI, Dentistry Oral Science, SciELO, and Bireme databases were consulted over the last 20 years. English- and Portuguese-language articles were included in this revision. Some authors stated that the osteoporotic bone is similar to the proposed model of bone type IV. Randomized clinical studies reported implant failure in patients with osteoporosis after menopause. Studies that contraindicate the use of implants in patients with osteoporosis infer that the impaired bone metabolism led to reduction of bone healing around the implants. Nevertheless, other authors believe that the presence of osteoporosis is not a definitive condition to contraindicate the therapy with dental implants. In these cases, the dentist should perform a proper treatment planning, modifying the implant geometry, and use larger implant diameter and with surface treatment. Thus, osteoporosis is not a contraindication for implant surgery because an accurate analysis of bone quality by means tomography is performed.

Oral rehabilitation after surgical removal of pleomorphic adenoma.

Although tumors of minor salivary glands are rare, the pleomorphic adenoma is the most common pathology among the benign neoplasm and can be found with high prevalence in the junction between hard palate and soft palate. The treatment of choice for most of maxillary tumors is surgical through either a total or partial maxillectomy. However, surgical defects caused by such type of treatment lead to both clinical and psychologic disorders for the patient. The immediate oral rehabilitation using interim palate obturator after maxillectomy provides optimization on the healing process, recovers the stomatognathic functions after surgery, and avoids psychosocial sequelae for the patients. This clinical report aimed to present the rehabilitation with immediate palate obturator of a patient who underwent a partial maxillectomy due to a hard palate pleomorphic adenoma of minor salivary glands. We report the clinical importance of the prosthetic rehabilitation and the improvements on both quality of life and stomatognathic functions of this patient. It can be concluded that the immediate rehabilitation of the patient after partial maxillectomy by using an interim palate obturator was a great option and provided clinical benefits in the immediate postoperative period, improving the patient's quality of life, allowing the patient's reinsertion into society, and reducing the surgical treatment sequelae.

Mandibular movement restoration through bilateral coronoidectomy by intraoral approach.

The present study aimed at reporting a clinical and surgical case of bilateral coronoidectomy, using an intraoral approach. The patient is a 26-year-old man, who sought attendance complaining of a gradual reduction of his oral opening in the past 3 years; however, he had an aggravation in the last 2 months. After clinical examination and imaging evaluation, the diagnosis of coronoid process hyperplasia was confirmed, and the surgical treatment was proposed. Under general anesthesia, with nasotracheal intubation guided by a nasofiberendoscope, using an intraoral approach, the bilateral coronoidectomy was performed. In the immediate postoperative period, an increase of the buccal opening measured 29 mm, representing an enhancement of 11 mm, and in the 30th postoperative day, it measured 31.12 mm. During the clinical follow-up period, a reestablishment of the mandibular movements was observed. Therefore, coronoidectomy by an intraoral approach and the physiotherapy performed in the postoperative period were efficient procedures.

In vitro biomechanical evaluation of the use of conventional and locking miniplate/screw systems for sagittal split ramus osteotomy.

PURPOSE: The aim of this in vitro study was to assess the biomechanical stability of 9 different osteosynthesis methods after sagittal split ramus osteotomy by simulating the masticatory forces and using a 3-point biomechanical test method. MATERIALS AND METHODS: Forty-five polyurethane hemimandibles with bone-like consistency were randomly assigned to 9 groups (n = 5) and subjected to sagittal split ramus osteotomy. After 4-mm advancement of the distal segment, the bone segments were fixed by different osteosynthesis methods using 2.0-mm miniplate/screw systems: group A, one 4-hole conventional straight miniplate; group B, one 4-hole locking straight miniplate; group C, one 4-hole conventional miniplate and one bicortical screw; group D, one 4-hole locking miniplate and 1 bicortical screw; group E, one 6-hole conventional straight miniplate; group F, one 6-hole locking straight miniplate; group G: two 4-hole conventional straight miniplates; group H, two 4-hole locking straight miniplates; and group I, 3 bicortical screws in an inverted-L pattern. All models were mounted on a base especially constructed for this purpose. Using a 3-point biomechanical test model, the hemimandibles were loaded in compressive strength in an Instron machine (Norwood, MA) until a 3-mm displacement occurred between segments vertically or horizontally. Data were analyzed by analysis of variance and Tukey test (alpha = 1%). RESULTS: The multiparametric comparison of the groups showed a statistically significant difference (P < .01) between groups that used 2 miniplates (groups G and H), 1 miniplate and 1 bicortical screw (groups C and D), and only bicortical screws (group I) compared with groups that used only 1 miniplate with 2 screws per segment (groups A and B) and 3 screws per segment (groups E and F). CONCLUSION: The placement of 2.0-mm-diameter bicortical screws in the retromolar region, associated or not with conventional and locking miniplates with monocortical screws, promoted a better stabilization of bone segments. Locking miniplates presented a better performance in bone fixation in all groups.

Implant-retained thumb prosthesis with anti-rotational attachment for a geriatric patient.

This report presents the use of a dental implant with an anti-rotational attachment for the retention of a thumb prosthesis. A retention system was manufactured with an attachment (UCLA) screwed into the implant with a two-bar system that was cast in metallic silver palladium. A substructure made from heat-cured acrylic resin was joined to the retention system by clips to join the thumb to the finger (bar clip) in the cast with implant rejoinder. The silicone material, Silastic-MDX 44210, was used to achieve function and aesthetics. Following osseointegration, no skin problems were observed. Whilst the implant-retained digital prosthesis presented some motor limitations, it allowed the patient to return to entertainment and achieve social conviviality.

Comparative study of 2 software programs for predicting profile changes in Class III patients having double-jaw orthognathic surgery.

INTRODUCTION: Computer software can be used to predict orthognathic surgery outcomes. The aim of this study was to subjectively compare the soft-tissue surgical simulations of 2 software programs. METHODS: Standard profile pictures were taken of 10 patients with a Class III malocclusion and a concave facial profile who were scheduled for double-jaw orthognathic surgery. The patients had horizontal maxillary deficiency or horizontal mandibular excess. Two software programs (Dentofacial Planner Plus [Dentofacial Software, Toronto, Ontario, Canada] and Dolphin Imaging [version 9.0, Dolphin Imaging Software, Canoga Park, Calif]) were used to predict the postsurgical profiles. The predictive images were compared with the actual final photographs. One hundred one orthodontists, oral-maxillofacial surgeons, and general dentists evaluated the images and were asked whether they would use either software program to plan treatment for, or to educate, their patients. RESULTS: Statistical analyses showed differences between the groups when each point was judged. Dolphin Imaging software had better prediction of nasal tip, chin, and submandibular area. Dentofacial Planner Plus software was better in predicting nasolabial angle, and upper and lower lips. The total profile comparison showed no statistical difference between the softwares. CONCLUSIONS: The 2 types of software are similar for obtaining 2-dimensional predictive profile images of patients with Class III malocclusion treated with orthognathic surgery.

Clinical viability for immediate loading of dental implants: part II--treatment alternatives.

The treatment with implants aims to obtain a direct interface between bone and implant. The implant is kept load-free during 4 to 6 months in the 2-stage procedure, which is considered a requisite for osseointegration. However, this period is based on empirical principles and uncomfortable for patient. So, the immediate loading protocol was suggested to submit implants to occlusal function after placement. This protocol has been applied for several conditions of edentulism. The aim of this study was to evaluate the treatment alternatives for immediate loading of complete and partial edentulous patients. In general, the studies have demonstrated high previsibility for rehabilitation of complete edentulous arches with full-arch, implant-supported prosthesis. The rehabilitation with immediate loading for maxillary overdenture is questionable because there is no longitudinal study in literature. The studies with partial edentulous arches have demonstrated high success rates for implants placed in the mandibular and maxillary anterior region. Additional care is recommended for posterior region mainly in the maxillary arch, and further studies are suggested to corroborate this treatment.

Clinical viability of immediate loading of dental implants: part I--factors for success.

Two-stage procedure for dental implants presents corroborated clinical success over 40 years. The evolution of surgical techniques, development of diagnostic methods, knowledge about tissue biology, and quality of implants regarding design and surface supported studies with 1 surgical stage followed by immediate prosthesis placement. However, several factors influence the treatment success with immediate loading. So, this study aimed to evaluate some factors regarding the success and characteristics of implants and patients.

The Role of MicroRNAs in the Osseointegration Process.

Regulation of cellular function is key to bone formation at endosseous implant surfaces. Osseointegration was "discovered" prior to the discovery of genetic regulation of osteoinduction or characterization of mesenchymal stem cells. Understanding osseointegration in cellular and molecular terms has benefited from genome-wide characterization of this healing process at endosseous implants in vivo. These in vivo studies also demonstrate a role for osteoprogenitor cells and cells involved in immune regulation and osteoclastogenesis. The identification of noncoding RNAs, including microRNAs, as key factors controlling cell function has highlighted the role of microRNAs in cell differentiation control. This review summarizes emerging in vitro and in vivo investigations emphasizing the role of microRNAs in the osseointegration process. Many microRNAs influence key osteoinductive pathways controlling Osterix, runt-related transcription factor 2 (RUNX2), and bone morphogenetic protein (BMP)/SMAD function. Others influence the monocyte/macrophage lineage. While significant progress has been made in elucidating the mechanisms associated with the regulation of surface modulation of osteoblast differentiation by microRNAs, knowledge gaps are evident in the identification and characterization of microRNAs linked to osseointegration. Given existing knowledge regarding the varied expression of microRNAs and their role in inflammation, it is important to understand how microRNA expression may influence the process of bone accrual at implant surfaces during osseointegration.

Evaluation of condylar resorption rates after orthognathic surgery in class II and III dentofacial deformities: A systematic review.

The purpose of this study was to perform a systematic review of morphological alterations in the condyles after orthographic surgery involving a sagittal split ramus osteotomy (SSRO), with or without surgery on the maxilla. Searches were performed on three databases and registered in the PROSPERO. The selected studies fulfilled the criteria established by the following PICO model: (1) population: individuals with skeletal dentofacial deformities (class II or III facial patterns), without asymmetry; (2) intervention: orthognathic surgery for mandibular setback using an SSRO, with or without a Le Fort I osteotomy, and fixed with bicortical screws or plates and screws; (3) comparison: orthognathic surgery for mandibular advancement using an SSRO, with or without a Le Fort I osteotomy, and fixed with plates and screws or bicortical screws; and (4) outcome: condylar resorption rate and relapse. Initially, 1,371 articles were identified and 636 articles were screened after elimination of duplicates, and 6 articles were selected for qualitative analysis based on the inclusion and exclusion criteria. Five studies had data regarding the rate of condylar resorption, varying from 0.0% to 4.2%. In conclusion, condylar resorption and relapses were present in a small percentage of patients studied.

Bone reformation and implant integration following maxillary sinus membrane elevation: an experimental study in primates.

BACKGROUND: Recent clinical studies have described maxillary sinus floor augmentation by simply elevating the maxillary sinus membrane without the use of adjunctive grafting materials. PURPOSE: This experimental study aimed at comparing the histologic outcomes of sinus membrane elevation and simultaneous placement of implants with and without adjunctive autogenous bone grafts. The purpose was also to investigate the role played by the implant surface in osseointegration under such circumstances. MATERIALS AND METHODS: Four tufted capuchin primates had all upper premolars and the first molar extracted bilaterally. Four months later, the animals underwent maxillary sinus membrane elevation surgery using a replaceable bone window technique. The schneiderian membrane was kept elevated by insertion of two implants (turned and oxidized, Brånemark System, Nobel Biocare AB, Göteborg, Sweden) in both sinuses. The right sinus was left with no additional treatment, whereas the left sinus was filled with autogenous bone graft. Implant stability was assessed through resonance frequency analysis (Osstell, Integration Diagnostics AB, Göteborg, Sweden) at installation and at sacrifice. The pattern of bone formation in the experimental sites and related to the different implant surfaces was investigated using fluorochromes. The animals were sacrificed 6 months after the maxillary sinus floor augmentation procedure for histology and histomorphometry (bone-implant contact, bone area in threads, and bone area in rectangle). RESULTS: The results showed no differences between membrane-elevated and grafted sites regarding implant stability, bone-implant contacts, and bone area within and outside implant threads. The oxidized implants exhibited improved integration compared with turned ones as higher values of bone-implant contact and bone area within threads were observed. CONCLUSIONS: The amount of augmented bone tissue in the maxillary sinus after sinus membrane elevation with or without adjunctive autogenous bone grafts does not differ after 6 months of healing. New bone is frequently deposited in contact with the schneiderian membrane in coagulum-alone sites, indicating the osteoinductive potential of the membrane. Oxidized implants show a stronger bone tissue response than turned implants in sinus floor augmentation procedures.