Intracanal removal and apical extrusion of filling material after retreatment using rotary or reciprocating instruments: A new approach using human cadavers.

AIM: This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers. METHODOLOGY: The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material. RESULTS: After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05). CONCLUSIONS: A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.

Apical transportation using Mtwo or Reciproc retreatment systems in severely curved canals: a micro-computed tomographic study.

OBJECTIVE: To assess apical root canal transportation using Mtwo or Reciproc during retreatment of severely curved canals, using a multi-analytical approach. METHODS: Forty mesial canals from mandibular molars (Vertucci type IV) were evaluated before and after endodontic retreatment to compare apical transportation with Mtwo retreatment or Reciproc. The systems were used on the same root but alternating the mesial canals. The analyses were performed by micro-computed tomography. Four evaluations were performed: (a) longitudinal transportation, (b) horizontal transportation, (c) variation in the angle of curvature of the canal, and (d) canal-root width ratio. Horizontal transportation and canal-root width ratio were evaluated in 1-, 3-, and 5-mm levels. RESULTS: Longitudinal transportation occurred in all samples, with a mean of 0.13 mm for Mtwo and 0.17 mm for Reciproc. Horizontal transportation increased as distant from the apex was the evaluated level, in mean. However, the transport was not observed in all samples. The mean angle of curvature was 4.16 for Mtwo and 3.03 for Reciproc. Canal-root width decreased as distant from the apex was the evaluated level. No significant differences were observed considering all tested variables, independently of the retreatment system or evaluated level (p > 0.05). CONCLUSION: Mtwo retreatment and Reciproc presented similar apical transportation (horizontal or vertical). CLINICAL RELEVANCE: Both Mtwo retreatment and Reciproc systems could be considered safe regarding apical transportation.

Shaping ability of new reciprocating or rotary instruments with two cross-sectional designs: An ex vivo study.

AIM: This study compared the shaping ability of four new reciprocating and rotary nickel-titanium instruments, with triangular or S-shaped cross-section, in the mesial canals of mandibular molars using micro-computed tomographic (micro-CT) evaluation. METHODOLOGY: Twenty-four extracted mandibular molars with Vertucci's class IV configuration in the mesial root were selected for this study. The teeth were matched in fours according to anatomic similarities as revealed by micro-CT and then distributed into four groups of 12 mesial canals each according to the instrumentation technique: Reciproc Blue, R-motion, VDW.Rotate and RaCe EVO. The final apical size of instrumentation was 30/0.04 for three systems and 25/08 for the Reciproc Blue instrument. Micro-CT scans were taken before and after preparation to evaluate the canal volume, area and unprepared surface areas, as well as the centring ability, and the canal: root width ratio. RESULTS: Preparation with all systems significantly increased the volume and area of the canals (p < .05). There were no significant differences between groups regarding the amount of unprepared areas in both the apical and full canal lengths (p > .05). Variation in the centre of gravity showed no significant difference between groups either (p > .05). The canal: root width ratio at levels 0 and 4 mm apically to the coronal canal opening was significantly increased by all systems (p < .01), with no significant differences between groups (p > .05). The canal width never exceeded 40% of the root width. CONCLUSIONS: Reciprocating or rotary instruments, with a triangular or an S-shaped cross-section, performed equally in shaping Vertucci's class IV mesial canals of mandibular molars.

Unprepared surface areas, accumulated hard tissue debris, and dentinal crack formation after preparation using reciprocating or rotary instruments: a study in human cadavers.

OBJECTIVES: This study using contralateral teeth from human cadavers assessed the amount of unprepared wall surface areas (USA), accumulated hard tissue debris (AHTD), and dentinal crack formation after root canal preparation using either reciprocating or rotary instruments. MATERIALS AND METHODS: Incisors with a single root canal from 11 human mandibles had their root canals prepared with Reciproc or Mtwo. Each contralateral tooth was treated with one of the test instruments in order to create matched pairs. Micro-CT scans were taken before and after preparation to instrument sizes 40 and 50 in both groups. USA and AHTD were evaluated in the full canal length or the apical portion only. Crack formation was also evaluated in the full root length. RESULTS: After size 40, no significant differences in USA and AHTD were observed in the full canal length (P > .05). Separate analysis of the apical 4-mm canal revealed no difference in AHTD, but significantly more USA with Mtwo than Reciproc (P < .05). After size 50, the amount of USA was similar between groups both in the full canal and in the apical canal (P > .05). More AHTD were observed in the full canal after using Mtwo size 50 (P < .05), but no difference occurred in the apical canal only (P > .05). Intragroup analyses showed a significant decrease of USA and a significant increase of AHTD when preparation size increased from 40 to 50 (P < .05). In teeth without any pre-existing detectable dentinal defect (n = 38), crack formation occurred in 4 teeth, 2 from each preparation system. CLINICAL RELEVANCE: Reciproc instrument size 40 resulted in more prepared areas in the apical canal than Mtwo instrument of the same size. However, the amount of AHTD did not differ between them at this file size. Canal enlargement to size 50 prepared more walls but created more debris. Dentinal defects were produced after preparation with both systems.

Distribution of sodium hypochlorite throughout the mesial root canal system of mandibular molars after adjunctive irrigant activation procedures: a micro-computed tomographic study.

OBJECTIVES: To evaluate and compare irrigant distribution throughout the root canal system of mesial roots of mandibular molars after application of distinct adjunctive irrigant activation procedures. MATERIALS AND METHODS: Fifteen extracted mandibular molars presenting Fan's type II, III, or IV isthmus configurations were selected. The canals were initially enlarged and cleaned. The same specimens were subjected to conventional positive pressure irrigation (PPI) followed by adjunctive irrigation approaches: passive ultrasonic irrigation (PUI), mechanical activation with the XP-endo Finisher instrument, and a control group in which the irrigant remained in the canal with no activation. Retention time for the irrigant was the same for all groups. Sodium hypochlorite mixed with a contrast medium (Omnipaque 300) was used as the irrigant. Before and immediately after the adjunctive irrigation, micro-computed tomographic (micro-CT) scans were taken to evaluate the volume of the entire root canal system that was filled by the irrigant. An exclusive analysis was also done for the isthmus area. RESULTS: Analysis of the entire root canal system showed that the XP-endo Finisher instrument promoted better distribution of the irrigant than PUI and the control group (p < 0.01). PUI was not significantly different from the control group (p > 0.05). A separate analysis of the isthmus area showed no significant difference between the adjunctive irrigation methods and the control (p > 0.05). CONCLUSIONS: The XP-endo Finisher instrument promoted better distribution of irrigant throughout the root canal system, especially in the apical canal segment, when compared to PUI. However, the tested approaches did not differ as to the ability to drive irrigants into the isthmus area. CLINICAL RELEVANCE: This study highlighted that the XP-endo Finisher instrument presented a better performance to distribute irrigant throughout the root canal system, especially in the apical canal segment compared to positive pressure irrigation and PUI.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Multipopulation evaluation of the internal morphology of mandibular first premolars from different South American countries. A micro-computed tomography study.

OBJECTIVE: To evaluate and compare several anatomical parameters of mandibular first premolars from individuals from different Latin American countries using micro-computed tomography. DESIGN: Five hundred extracted mandibular first premolars from Brazilian, Argentinian, Chilean, Colombian, and Ecuadorian individuals were scanned using micro-computed tomography (n = 100 teeth/country). Root canal configurations were classified according to established parameters. Analyses also included: canal volume and surface area, structure model index, distances from the apical foramen to the root apex or the cementoenamel junction, major/minor apical canal diameters, canal orifice shape, and prevalence of ramifications. RESULTS: A single root was the most common anatomy in all countries (range, 97%-100%). Vertucci's type-I canal was the most frequent configuration (range, 36%-66%), followed by C-shaped and type-V canals. The oval-shaped canal orifice was the most predominant in all countries (range, 34%-58%), followed by the circular shape (range, 16%-47%). C-shaped canals occurred in all subpopulations (range, 14%-26%), always associated with radicular grooves. Ranges for canal ramifications were as follows: accessory canals, 36%-73%; lateral canals, 4%-12%; and apical delta, 4%-14% of the teeth. Many anatomic parameters differed significantly between countries (P < .05). CONCLUSIONS: Vertucci's types-I and -V, and C-shaped canals were the most prevalent configurations in the subpopulations investigated. Accessory canals and several complex anatomies were found, with some significantly different frequencies between countries.

Internal morphology of distal roots of mandibular first molars revealed by computed microtomography.

To evaluate the internal morphology of 100 distal roots of mandibular first molars using micro-CT. Teeth were scanned to characterise: Vertucci type, root length, canal shape, presence and location of accessory canals, and the number of foramina at 4 mm from the apex, presence of root isthmus and the length from the primary canal to the apical foramen. Vertucci type I was found in 57% of cases, followed by V (27%). The most common cross-section 1 mm from the apex was oval (49%) and circular (38%). The average root length was 16.06 mm (16.61-19.02 mm). The mean foramen size was 0.32 and 0.53 mm for the minor and major diameters, respectively. The volume, surface area and SMI were 7.84 mm3 , 68.87 mm2 and 1.52 mm, respectively. Root isthmi were found in 47% of the samples, and the length mean from the primary canal to the apical foramen was 2,03 mm. The internal morphology of the distal roots of mandibular first molars may be complex and shows variations.

Planned Apical Preparation Using Cone-Beam Computed Tomographic Measures: A Micro-Computed Tomographic Proof of Concept in Human Cadavers.

INTRODUCTION: This study assessed the amount of unprepared surface areas at the apical 4-mm segment of the root canal after a planned preparation based on cone-beam computed tomography (CBCT) measurements. METHODS: Eighteen posterior mandible segments were obtained from cadavers and scanned using CBCT and micro-computed tomographic (micro-CT) imaging. CBCT images were used to measure the largest initial canal diameter from 29 root canals of premolars at 1, 2, 3, and 4 mm short of the apical foramen. Each measurement was used to select a master apical instrument with size/taper that was 1 diameter larger to prepare the apical 4 mm of each particular root canal. A post-preparation micro-CT scan was obtained, and the unprepared canal areas were calculated. RESULTS: A very high amount of surface areas over the apical 4 mm of the root canal was included in the final preparation (mean >90%). The unprepared areas ranged from as low as 3.7% to a maximum of 14.6% (mean and median, 9.2% and 9.1%, respectively). CONCLUSIONS: The proposed planned apical root canal preparation resulted in optimized root canal shaping with a substantial amount of prepared surface areas. The protocol used also resulted in a conservative canal enlargement using final instruments that were 1 size larger than the initial largest canal diameter.

Micro-computed tomographic evaluation of root canal morphology in mandibular first premolars from a Colombian population.

Dental anatomy can vary significantly between different populations from different countries. Dental anatomical variations are of great interest to the dental professional, especially to endodontists, since they can influence the outcome of endodontic treatment. The purpose of the present study was to describe the anatomical variations of the root canal in mandibular first premolars in a population from Colombia, using micro-computed tomography. Fifty mandibular first premolars were scanned on a SkyScan 1174 and the microcomputed tomographic images were reconstructed. Anatomy was assessed using three-dimensional models. The parameters used were: Vertucci's classification, area and volume, perimeter, circularity, and major and minor diameter at 1, 2 and 3 mm from the apical foramen. According to the Vertucci's classification, teeth were classified as: types I (40%), V (24%), VII (4%) and III (4%), with 28% not classifiable. C-shaped canals were found in 1.8% of the sample. Mean evaluations at 1, 2, 3 mm of the foramen were as follows, respectively: perimeter 1.07 ± 0.57, 1.27 ± 0.78 and 1.57 ± 0.84 mm; circularity 0.59 ± 0.19, 0.57 ± 0.20 and 0.56 ± 0.22; maximum diameter 0.41 ± 0.23, 0.48 ± 0.33 and 0.60 ± 0.37 mm; minimum diameter 0.24 ± 0.10, 0.26 0.11 and 0.21 ± 0.13 mm. Mean total area and volume were 61.27 ± 16.47 mm2 and 12.47 ± 4.95 mm3, respectively. There was wide anatomical variation in mandibular first premolars from Colombian individuals, reinforcing the need for proper anatomical knowledge to establish more effective strategies for endodontic treatment.

A anatomia dentária pode variar significativamente entre diferentes populações, de diferentes países. As variações anatômicas dentais são de grande interesse para o profissional da odontologia, principalmente para os endodontistas, pois podem influenciar no resultado do tratamento endodôntico. Descrever as variações anatômicas do canal radicular dos primeiros prémolares inferiores em uma população da Colômbia, usando a micro tomografia computadorizada. Cinquenta primeiros prémolares inferiores foram digitalizados em um SkyScan 1174 e as imagens tomográficas foram reconstruídas e a anatomia foi avaliada por meio de modelos tridimensionais. Os parâmetros utilizados foram: classificação de Vertucci, área e volume, perímetro, circularidade e diâmetros maior e menor a 1, 2 e 3 mm do forame apical. De acordo com a classificação de Vertucci, os dentes foram classificados em: tipos I (40%), V (24%), VII (4%) e III (4%), sendo 28% não classificáveis. Canais em forma de C foram encontrados em 1,8% da amostra. As avaliações médias em 1, 2, 3 mm do forame foram as seguintes, respectivamente: perímetro 1,07 ± 0,57, 1,27 ± 0,78 e 1,57 ± 0,84 mm; circularidade 0,59 ± 0,19, 0,57 ± 0,20 e 0,56 ± 0,22; diâmetro maior 0,41 ± 0,23, 0,48 ± 0,33 e 0,60 ± 0,37 mm; diâmetro menor 0,24 ± 0,10, 0,26 ± 0,11 e 0,21 ± 0,13 mm. A média da área total e do volume foram 61,27 ± 16,47 mm2 e 12,47 ± 4,95 mm3, respectivamente. Houve uma grande variação anatômica nos primeiros pré-molares inferiores de colombianos, reforçando a necessidade de conhecimento anatômico adequado para estabelecer estratégias mais eficazes para o tratamento endodôntico.

Canal transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals: A micro-computed tomographic study.

This study assessed the apical transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals. Thirty-eight roots were analysed using micro-CT for the comparison of apical transportation produced by two retreatment systems. Longitudinal transportation, horizontal transportation, variation in the canal angle of curvature and variation in the canal/root width ratio were analysed. Longitudinal transportation was frequently observed, regardless of the system used. The canals retreated with Mani GPR showed a significantly higher horizontal transportation at 1 mm from the root apex (P < 0.01) and greater variation of the canal curvature angle (P < 0.01). The canal/root width ratio was similar between groups (P > 0.05). In conclusion, longitudinal transportation occurred more frequently in the mesial canal walls. Mani GPR showed greater horizontal transportation at 1 mm short of the apex, and higher variation of the canal curvature angle compared with HyFlex NT.

Accuracy of Microcomputed Tomography in Detecting Dentinal Cracks: A Correlative Study with Scanning Electron and Operative Microscopy.

The aim of the study was to evaluate the accuracy of microcomputed tomography (mCT) to detect dentinal cracks when compared with scanning electron microscopy (SEM) and operating microscopy (OM). Different conditions of pixel size (10 or 17 µm), sample moisture (dry/moist), and transillumination (with/without) were evaluated. Additionally, the influence of the dentinal defect width on its detection was analyzed. The root canals of human mandibular incisors were prepared with the Reciproc R40 instrument (VDW, Munich, Germany). The roots were sectioned 5 and 10 mm from the apex, and mCT scans of middle and apical segments were performed at two pixel sizes: 10 µm and 17 µm, under dry and moist conditions (groups: 10dry, 10moist, 17dry, and 17moist). The operating microscope was used with and without transillumination (groups: OMTrans and OM). Findings showed that accuracy was moderate for the 10dry, 10moist, and OMTrans groups, poor for OM and very poor for 17dry and 17moist. The thickness of the dentin crack significantly influenced its detection by mCT using the resolution of 10 µm in both dry and wet conditions (P = .002), 17 µm in the dry condition (P = .002), and by the operating microscope using transillumination (P = .009). Some cracks visualized in SEM were not detected by mCT and an operating microscope. Not only the mCT resolution but also the sample moisture condition and the dentinal crack width can significantly influence its detection.

Quality of Root Canal Filling Using a Bioceramic Sealer in Oval Canals: A Three-Dimensional Analysis.

OBJECTIVES: The oval canals may be associated with inadequate debridement, which can affect the quality of the root canal filling, thus the treatment outcome. The aim of the present work was to compare the quality of oval canals fillings using EndoSequence BC sealer with the single-cone technique or cold lateral compaction. MATERIALS AND METHODS: Thirty-eight human single-rooted premolars with oval canals were instrumented to 1 mm from the apical foramen with hand nickel-titanium files, followed by circumferential filing with Hedstrom files. Teeth were paired into two groups based on their micro-computed tomography (CT) morphological parameters. Both groups were filled using EndoSequence BC sealer. The first used a single cone and the other with the cold lateral compaction technique. The voids volume was evaluated by micro-CT and the percentage was calculated for the total length and for the apical 5 mm of each canal. The Mann-Whitney U test was used to assess whether the surface area and obturation length differed significantly between the groups and to compare the percentage of voids for each technique. RESULTS: Both techniques resulted in less than 16% voids, with no statistically significant difference between them for the total canal length and for the apical 5 mm (p > 0.05). CONCLUSIONS: The quality of the obturation performed with the single-cone technique was similar to that achieved with lateral compaction using EndoSequence BC sealer in oval canals.

Supplementing filling material removal with XP-Endo Finisher R or R1-Clearsonic ultrasonic insert during retreatment of oval canals from contralateral teeth.

This study compared the efficacy of XP-Endo Finisher R and R1-Clearsonic insert in removing filling material remnants from oval canals. Twelve pairs of contralateral premolars were treated and subsequently retreated with Reciproc 50. A supplementary procedure with XP-Endo Finisher R or R1-Clearsonic was performed. Micro-computed tomography was used to quantify the filling material volume in the full canal and apical segment lengths. Intragroup analyses revealed significant reduction of filling material after both procedures, not only in the full canal but also in the apical segment (P < 0.05). The amount of filling material removed with XP-Endo Finisher R and R1-Clearsonic was 47.9% and 52.2% in the apical segment (P > 0.05), and 82.1% and 64.6% in the full canal (P < 0.05). None of the instruments was effective in completely removing the filling material from the apical canal, but better results were obtained with XP-Endo Finisher R in the total canal length.

Mucosal Fenestration After 2% Chlorhexidine Extrusion Used in Substitution of Sodium Hypochlorite: A Case Report.

This report describes a case of sodium hypochlorite (NaOCl) and chlorhexidine (CHX) extrusion through the apical foramen, causing acute pain, swelling and mucosal fenestration. A 62-year-old woman was referred for endodontic treatment in the first left maxillary premolar with a diagnosis of necrotic pulp. After the root canal irrigation with 2.5% NaOCl, the patient felt a burning sensation and pain. Discrete swelling and redness were noted in the patient's face at the end of the session. Antibiotic and corticosteroids were prescribed. In the next appointment, 2% CHX was used, but another episode of extrusion occurred, with a sudden acute pain and intense swelling within a few minutes after the injection. After 2 weeks, the patient exhibited a left-side facial swelling extending anterior and inferior to the left zygomatic arch and superior to the body of the mandible. Oral antibiotic and anti-inflammatory drugs were administered. After 10 days, the swelling had completely diminished, but a mucosal fenestration and tooth mobility were verified. A cone beam CT was requested and showed a periapical lesion involving both buccal and palatal roots. After a prosthetic evaluation, the tooth extraction was indicated. One week after tooth removal, the mucosa was completely healed.

Internal Lower Incisor Morphology revealed by Computerized Microtomography.

This study evaluated the internal morphology of lower incisors using computerized microtomography (micro-CT) images. Eighty-nine lower incisors were scanned by micro-CT and reconstructed with NRecon software. 2D parameters (perimeter, root length, circularity and canal diameter) and 3D parameters (volume, surface area and structure model index) were evaluated with CTAn and CTVol software. The results are presented descriptively. It was found that 89.9% of the canals had a single main root canal (type I), followed by type II (6.7%) and III (3.4%), while 5.6% of the specimens presented lateral canals and 1.1% had an apical delta. Mean volume and surface area were 31.80mm³ and 90.58mm², respectively. The most prevalent shape of the root canal at CEJ level was circular (41.6%) and 1mm from the apex, 73% of the samples were classified as oval. Lower incisors with internal anatomical variations may offer a high degree of technical complexity and may result in treatment failure.

Este estudo avaliou a morfologia interna dos dentes incisivos inferiores utilizando imagens de microtomografia computadorizada (micro-TC). 89 incisivos inferiores foram escaneados or micro-CT e reconstruídos com o programa NRecon. Parâmetros 2D - perímetro, comprimento da raiz, circularidade e diâmetro do canal - e parâmetros 3D - volume, área superficial e índice de modelo de estrutura - foram avaliados com os softwares CTAn e CTVol. Os resultados foram apresentados de forma descritiva. 89,9% dos canais apresentaram um único canal radicular principal (tipo I), seguido pelo tipo II (6,7%) e III (3,4%). 5,6% dos espécimes apresentavam canais laterais e 1,1% delta apical. O volume médio e a área de superfície foram 31,80mm³ e 90,58mm², respectivamente. A forma mais prevalente do canal radicular no nível da CEJ foi circular (41,6%) e a 1 mm do ápice, 73% das amostras foram classificadas como ovais. Incisivos inferiores com variações anatômicas internas podem oferecer um alto grau de complexidade técnica e resultar em falha do tratamento.

Cleaning, Shaping, and Disinfecting Abilities of 2 Instrument Systems as Evaluated by a Correlative Micro-computed Tomographic and Histobacteriologic Approach.

INTRODUCTION: This study assessed the cleaning, shaping, and disinfection abilities of 2 instrumentation systems in molar root canals using a novel correlative analytical approach. METHODS: The root canals from extracted mandibular and maxillary molars with apical periodontitis were pair matched according to anatomic similarities as determined by micro-computed tomographic analysis and prepared with either XP-endo Shaper (FKG Dentaire, La Chaux-de-Fonds, Switzerland) (n = 16) or Reciproc Blue (VDW, Munich, Germany) (n = 16) instruments and 2.5% sodium hypochlorite irrigation. Pre- and postpreparation micro-computed tomographic scans were used to identify and calculate the unprepared surface areas (shaping), which were histobacteriologically evaluated for the presence of residual bacteria (disinfection) and pulp tissue remnants (cleaning) in each canal third. RESULTS: Unprepared canal surface areas for XP-endo Shaper and Reciproc Blue in the full canal length were approximately 26% and 19% (P < .05), respectively (30% and 23% in the apical part of the canal, P > .05). Preparation with Reciproc Blue resulted in 37.5% canals free of bacteria in all sections examined and 56% in the apical sections only. XP-endo Shaper resulted in 44% canals free of bacteria in all sections, and 56% in the apical part of the canal only. Pulp tissue remnants were not observed in 31% (all canal sections) and 50% (apical canal sections) of specimens from both instrument systems. No significant differences were observed between instruments when comparing the amount of pulp tissue remnants and the number of cases negative for bacteria and tissue remnants (P > .05). CONCLUSIONS: Although the Reciproc Blue instrument had superior shaping ability in comparison with XP-endo Shaper, both systems performed similarly in cleaning and disinfecting root canals. Irregular canals and difficult-to-reach areas were not thoroughly cleaned and disinfected by any of the tested systems.

Matching the Dimensions of Currently Available Instruments with the Apical Diameters of Mandibular Molar Mesial Root Canals Obtained by Micro-computed Tomography.

INTRODUCTION: This micro-computed tomographic study investigated the original anatomic diameters of the apical portion of mandibular molar mesial canals and matched them to the dimensions of instruments that are currently available and commonly used for apical preparation. METHODS: One hundred eight mandibular molar mesial roots with Vertucci type IV configuration were scanned by micro-computed tomographic imaging, and the largest anatomic diameter of both mesial canals at 1, 2, 3, and 4 mm short of the apical foramen was measured. Canal diameters were compared with the dimensions of 10 endodontic instruments for simulation of preparation 1 mm short of the apical foramen. Accordingly, the instruments with a diameter larger than the largest canal diameter were regarded as having the potential to prepare 100% of the canal walls at each specific point or over the 4-mm apical segment. RESULTS: At 1 and 2 mm short of the apical foramen, a 45/.02 instrument had a larger diameter than the mesiobuccal canal diameter in 73% and 55% of the teeth, respectively. Corresponding figures for the mesiolingual canal were 65% and 55%. When the entire 4-mm apical segment was considered, a 40/.06 instrument had better results, being larger than the apical canal in about 20% of the specimens. Overall, 78% of the apical canals would not be completely prepared by any instrument. Based on the mean (median) anatomic diameters, the adequate instrument dimensions would be 40/.10 (40/.08) for mesiobuccal canals and 45/.08 (40/.09) for mesiolingual canals. CONCLUSIONS: The dimensions of the available instruments are not compatible with complete apical preparation in the majority of cases. The ideal instrument size/taper to include all the canal walls in apical preparation is too large and may not be safe for clinical use.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography

Abstract The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Resumo O objetivo deste trabalho foi avaliar a centralização e a espessura da dentina dos canais radiculares mesiais de primeiros molares inferiores por meio de microtomografia computadorizada (micro-CT). Material e métodos: Noventa e nove molares inferiores com canais tipo IV de Vertucci foram escaneados por micro-TC. O desvio mesiodistal e o centroide foram avaliados para os canais mesiovestibular (MB) e mesiolingual (ML), nos 4mm apicais e em todo o comprimento do canal. Resultados: A espessura da dentina foi semelhante para os canais MB e ML. A espessura mais estreita foi encontrada na parede distal de um canal MB (0,07mm), enquanto a mais larga foi encontrada na parede mesial de um canal MB (2,46mm). Na análise centroide, tanto o canal MB quanto o ML exibiram desvios quando comparados ao centroide da raiz, ao longo de todo o comprimento do canal e nos 4 mm apicais. Para o canal MB, o desvio médio foi de 0,83mm (0,02mm-2,30mm) para canal inteiro e 0,18mm (0,01mm-1,01mm) para o apical de 4mm. Da mesma forma, para o canal ML, o desvio médio mediu 0,83 mm (0,05 mm-3,99 mm) para o canal inteiro e 0,21 mm (0,01 mm-1,01 mm) para os 4 mm apicais. No geral, foram observados desvios em direção mesial das raízes, sendo 69% para canais MB e 57% para canais ML para canal inteiro, e 51% para canais MB dentro dos 4 mm. A exceção foi o canal ML, que apresentou maior desvio para distal nos 4mm apicais, representando 52% dos casos. A espessura da dentina foi consistente entre os canais mesiais dos molares inferiores. Entretanto, não há centralidade dos canais mesiais em suas raízes, com frequente desvio para mesial.

Mandibular mesial root canal morphology using micro-computed tomography in a Brazilian population.

To assess the root canal system morphology of mandibular molars by means of micro-computed tomography, one hundred and four mandibular first molars were investigated and the following were evaluated: Vertucci's classification, the presence of lateral canals and the number of apical foramina. Mesial root canal surface area and volume were obtained by the CTAn and CTvol software. The type of root canal isthmi was classified applying the Hsu & Kim and Fan criteria. The most frequent root canal configuration was Vertucci type IV (46.2%). Lateral canals were observed in all root canal thirds and the average number of apical foramina was 3.15 ± 1.77. Regarding the presence of isthmus, Types I and II were the most prevalent, according to Hsu & Kim and Fan et al. criteria, respectively. Mesial root canals of mandibular molars showed high morphology variability.