Ionic Liquid-Based Polymer Matrices for Single and Dual Drug Delivery: Impact of Structural Topology on Characteristics and In Vitro Delivery Efficiency.

Previously reported amphiphilic linear and graft copolymers, derived from the ionic liquid [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TMAMA_Cl‾), along with their conjugates obtained through modification either before or after polymerization with p-aminosalicylate anions (TMAMA_PAS‾), were employed as matrices in drug delivery systems (DDSs). Based on the counterion type in TMAMA units, they were categorized into single drug systems, manifesting as ionic polymers with chloride counterions and loaded isoniazid (ISO), and dual drug systems, featuring ISO loaded in self-assembled PAS conjugates. The amphiphilic nature of these copolymers was substantiated through the determination of the critical micelle concentration (CMC), revealing an increase in values post-ion exchange (from 0.011-0.063 mg/mL to 0.027-0.181 mg/mL). The self-assembling properties were favorable for ISO encapsulation, with drug loading content (DLC) ranging between 15 and 85% in both single and dual systems. In vitro studies indicated ISO release percentages between 16 and 61% and PAS release percentages between 20 and 98%. Basic cytotoxicity assessments using the 2,5-diphenyl-2H-tetrazolium bromide (MTT) test affirmed the non-toxicity of the studied systems toward human non-tumorigenic lung epithelial cell line (BEAS-2B) cell lines, particularly in the case of dual systems bearing both ISO and PAS simultaneously. These results confirmed the effectiveness of polymeric carriers in drug delivery, demonstrating their potential for co-delivery in combination therapy.

Designing Drug Conjugates Based on Sugar Decorated V-Shape and Star Polymethacrylates: Influence of Composition and Architecture of Polymeric Carrier.

Amphiphilic ethylenediamine (EDA)-functionalized V-shape and star copolymers with centrally placed methyl-α,D-glucopyranoside were designed as nanocarriers. Anticancer doxorubicin (DOX) was conjugated in water via amine groups in copolymers to form ketimine linkers. Variations of arm length and number (40-65 units per arm and 2 vs 3 vs 4 arms), DOX feed amount, and conjugation site content (50-160 units of EDA groups), as responsible for efficiency of drug attachment (10-60 units of conjugated DOX) and its release at various pH (5.0 vs 7.4), were studied to demonstrate potential for drug delivery. Size of conjugate particles (10-195 nm) formed in aqueous solution was strongly dependent on the polymer composition and topology. The broad range of drug amounts (25-95%) were detected by the precipitation method, showing pH sensitivity by some polymeric conjugates with faster DOX release in acidic conditions.

Synthesis and in vitro cytotoxicity evaluation of star-shaped polymethacrylic conjugates with methotrexate or acitretin as potential antipsoriatic prodrugs.

Water-soluble polymer-drug conjugates were obtained and analyzed towards their potential use as prodrugs for two hydrophobic antipsoriatic agents, including methotrexate (MTX) and acitretin (AC). The conjugation efficacy of MTX decreased with a decreasing molar ratio of N,N-dimethylaminoethyl methacrylate (DMAEMA) repeating units in the polymethacrylic chains. Cytotoxicity of positively charged (from +5 to +10 mV) nano- and microparticles (3-1500 nm in DMEM at 37 °C) were estimated by in vitro MTT and Annexin-V apoptosis assays on Me45, NHDF, HaCaT and BEAS-2B cell lines. Further, cell cycle analysis revealed arrest in G0/G1 phase in melanoma cells, while neither apoptosis induction nor cell cycle arrest occurred in normal epidermal and epithelial cells. Tested conjugates displayed a novel cytostatic effect in Me45 cells and a pro-apoptotic effect in HaCaT cells. Epithelial BEAS-2B cells were the most sensitive to the tested conjugates and responded via induction of necrosis. Cell line models allowed for characterization of the biologically relevant potential action of pro-drugs. Additionally, a skin in vitro evaluation assay provided the first known evidence of side-effect reduction with pro-drug use. Histological examinations confirmed the lack of negative effects of conjugates on the skin and showed no irritating properties.

Choline supported poly(ionic liquid) graft copolymers as novel delivery systems of anionic pharmaceuticals for anti-inflammatory and anti-coagulant therapy.

New type of carriers based on grafted poly(ionic liquid)s was designed for delivery of ionically attached salicylates (Sal). Choline derived ionic liquid monomeric units were successfully introduced with various content in the side chains by the controlled radical polymerization. Properly high amounts of ionic pharmaceutics in the polymer systems were achieved by the well-fitted length and grafting degree of the side chains. In aqueous solution the graft copolymers were self-assembled into the spherical superstructures with sizes up to 73 nm. Delivery studies showed "burst" release within 4 h, after that it was slower yielding ~70% of released drug within 80 h. Proposed nanocarriers supported low toxicity against human cells (NHDF and BEAS-2B), anti-inflammation activity evaluated with the use of pro-inflammatory interleukins (IL-6 and IL-8) and antibacterial activities towards E. coli. Adjustment of ionic drug content by structural parameters of graft copolymers, including grafting degree and graft length, are advantageous to tailor nanocarriers with self-assembly properties in aqueous media. Effective release process by ionic exchange and biological activity with low toxicity are promising for further development of this type of drug delivery (DDS).

Self-assembling water-soluble polymethacrylate-MTX conjugates: The significance of macromolecules architecture on drug conjugation efficiency, the final shape of particles, and drug release.

Water-soluble polymer-methotrexate (MTX) conjugates were obtained via efficient carbodiimide-mediated amidation (E = 17-100%). Binding abilities between water-soluble V-shaped or star-shaped copolymers and MTX were studied by isothermal titration calorimetry spectroscopic (UV-vis, NMR) and microscopic (scanning electron microscopy and transmission electron microscopy) techniques. The efficiency of the amidation reaction has depended on the amount of pendant amino alcohol groups and zeta potential (ZP) values of polymeric carries. The sizes of aggregates formed by polymer-drug conjugates in water increased with the number of copolymer arms (202-774 nm at 37°C). Moreover, the conjugates with the high amount of bounded MTX molecules (nMTX > 78) exhibited negative ZP values. The drug release experiments revealed that the amount of the released MTX depends on pH and can be controlled via shape, topology, and composition of polymeric carrier. Preliminary cytotoxicity studies of V-shaped-MTX conjugate on human immortalized nontumorigenic keratinocyte (HaCaT) cells indicated cytocompatibility of the compound in a wide range of concentrations. The results of our studies have shown that physicochemical and drug release properties of obtained polymer-MTX prodrugs can be tailored via the structure and the topology of the polymeric carrier. Thus conjugates might find the application in a different type of treatment (cancer or psoriasis therapy) and administration (intravenous, dermal, or pulmonary). © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2476-2487, 2019.

Cellular response to star-shaped polyacids. Solution behavior and conjugation advantages.

The nanosized (∼10nm in 0.01M PBS and 210nm in water) star-shaped polymethacrylates with various content of pendant carboxyl groups were characterized via basic physicochemical and biological properties toward their use as drug carriers for intravenous administration. The carboxyl groups in polymer were employed to conjugate fluorescein (FA) or doxorubicin (DOX) via amide bond formation. In case of DOX, the conjugation efficiency was higher (4.0-16.0%) than of FA conjugation (1.5-4.5%) for corresponding copolymers. The solubility of conjugates strongly depended on the type of attached compound, that is free carriers and their FA conjugates were water-soluble, whereas DOX conjugates were insoluble in water. Cytotoxicity tests performed on model fibroblast and epithelial cell lines showed that negatively charged copolymers (ZP ranged from -75 to -25mV) were slightly toxic for normal cells (NHDF) and non-toxic for cancer cell lines (HCT-116 and MCF-7/R). The copolymer dose equal to 125µg/mL resulted in cell viability 118% towards NHDF and 90% for HCT116 cells. The internalization of a representative polymer-fluorescein conjugate by HCT-116 and its accumulation in cytoplasm was proven via fluorescence microscopy. MMA/MAA stars showed no adverse effect on HCT-116 cells, hence fluorescein-tagged polymers might be applied as fluorescence probes for in vitro imaging, whereas doxorubicin-tagged polymers might be developed as a new polymeric drug carriers.

Miktoarm star copolymers from D-(-)-salicin core aggregated into dandelion-like structures as anticancer drug delivery systems: synthesis, self-assembly and drug release.

The ß-glucoside-based heterofunctional initiator was used in the synthesis of well-defined eight-armed miktopolymers by sequential ring opening polymerization (ROP) of ε-caprolactone (CL) and atom transfer radical (co)polymerization (ATRP) of methyl methacrylate (MMA) and/or tert-butyl methacrylate (tBMA). Consequently, methacrylic acid (MAA) repeating units were introduced via selective cleavage of pendant tert-butyl protecting groups. Both the amphiphilic copolymers and miktoarm copolymers were self-assembled at 37°C and pH 7.4. The aggregates of miktoarm polymers were larger than that formed by polymethacrylate homoarm stars (≥250nm vs ≤200nm). The critical aggregation concentrations (CAC) of (mikto)stars were relatively low (0.006-0.411mg/mL) and decreased with the increase in MAA fraction content. Both MAA-based mikto- and homoarmed (co)polymers with shorter arms exhibited lower doxorubicin (DOX) loading capacity, whereas camptothecin (CPT) was encapsulated preferably by miktostars. The kinetic profiles of drug release showed that the rate of release was higher at acidic environment (pH 5.0) than in neutral pH. In the most cases the studied miktopolymer systems demonstrated the well-controlled delivery of the model anticancer drugs, which can be adjusted by structural parameters of polymeric carriers.