Nanostructured lipid carriers loaded with simvastatin: effect of PEG/glycerides on characterization, stability, cellular uptake efficiency and in vitro cytotoxicity.

OBJECTIVE: The aim of this study is to evaluate the use of PEG/glycerides of different HLB; oleoyl macrogol-6-glycerides (Labrafil® M 1944 CS) and caprylocaproylmacrogol-8-glycerides (Labrasol®), compared to Labrafac lipophile® as PEG-free glyceride in the preparation of nanostructured lipid carriers (NLCs). PEG/glycerides are suggested to perform a dual function; as the oily component, and as the PEG-containing substrate required for producing the PEGylated carriers without physical or chemical synthesis. METHODS: Lipid nanocarriers were loaded with simvastatin (SV) as a promising anticancer drug. An optimization study of NLC fabrication variables was first conducted. The effect of lyophilization was investigated using cryoprotectants of various types and concentrations. The prepared NLCs were characterized in terms of particle size (PS), size distribution (PDI), zeta potential (ZP), drug entrapment, in vitro drug release, morphology and drug-excipient interactions. The influence of glycerides ± PEG on the cytotoxicity of SV was evaluated on MCF-7 breast cancer cells, in addition to the cellular uptake of fluorescent blank NLCs. RESULTS: The alteration between different oil types had a significant impact on PS, ZP and drug release. Both sucrose and trehalose showed the lowest increase in PS and PDI of the reconstituted lyophilized NLCs. The in vitro cytotoxicity and cellular uptake studies indicated that SV showed the highest antitumor effect on MCF-7 cancer cells when loaded into Labrasol® NLCs demonstrating a high cellular uptake as well. CONCLUSION: The study confirms the applicability of PEG/glycerides in the development of NLCs. Encapsulating SV in Labrasol®-containing NLC could enhance the antitumor effect of the drug.

Impact of microparticle formulation approaches on drug burst release: a level A IVIVC.

AIM: To study the effect of poly(d,l-lactic-co-glycolic acid) (PLGA) microparticles (MPs) preparation techniques on particle physical characterization with special emphasis on burst drug release. METHODS: A basic drug clozapine was used in combination with acid-terminated PLGA. Two approaches for MP preparation were compared; the in situ forming microparticle (ISM) and the emulsion-solvent evaporation (ESE) methods using an experimental design. The MPs obtained were compared according to their physical characterization, burst release and T80%. An in vivo pharmacokinetic study with in vitro-in vivo correlation (IVIVC) was also performed for the selected formula. RESULTS: Both methods were able to sustain drug release for three weeks. ISM produced more porous particles and was not effective as ESE for controlling burst release. A good IVIVC (R(2) = 0.9755) was attained when injecting the selected formula into rats. CONCLUSION: MPs prepared with ESE showed a minimum burst release and a level A IVIVC was obtained when administered to rats.

Inhalable DNase I microparticles engineered with biologically active excipients.

Highly viscous mucus poses a big challenge for the delivery of particulates carrying therapeutics to patients with cystic fibrosis. In this study, surface modifying DNase I loaded particles using different excipients to achieve better lung deposition, higher enzyme stability or better biological activity had been exploited. For the purpose, controlled release microparticles (MP) were prepared by co-spray drying DNase I with the polymer poly-lactic-co-glycolic acid (PLGA) and the biocompatible lipid surfactant 1,2-dipalmitoyl-Sn-phosphatidyl choline (DPPC) using various hydrophilic excipients. The effect of the included modifiers on the particle morphology, size, zeta potential as well as enzyme encapsulation efficiency, biological activity and release had been evaluated. Powder aerosolisation performance and particle phagocytosis by murine macrophages were also investigated. The results showed that more than 80% of enzyme activity was recovered after MP preparation and that selected surface modifiers greatly increased the enzyme encapsulation efficiency. The particle morphology was greatly modified altering in turn the powders inhalation indices where dextran, ovalbumin and chitosan hydrochloride increased considerably the respirable fraction compared to the normal hydrophilic carriers lactose and PVP. Despite of the improved aerosolisation caused by chitosan hydrochloride, yet retardation of chitosan coated particles in artificial mucus samples discouraged its application. On the other hand, dextran and polyanions enhanced DNase I effect in reducing cystic fibrosis mucus viscosity. DPPC proved good ability to reduce particles phagocytic uptake even in the presence of the selected adjuvants. The prepared MP systems were biocompatible with lung epithelial cells. To conclude, controlled release DNase I loaded PLGA-MP with high inhalation indices and enhanced mucolytic activity on CF sputum could be obtained by surface modifying the particles with PGA or dextran.

Hydrophilic versus hydrophobic porogens for engineering of poly(lactide-co-glycolide) microparticles containing risedronate sodium.

OBJECTIVE: The aim of this study was to investigate the effect of two mechanistically different porogens, namely: the hydrophilic hydroxy-propyl-ß-cyclodextrin and the hydrophobic porogens (mineral oil and corn oil) in producing open/closed pored engineered polylactide-co-glycolic-acid microspheres suitable for pulmonary delivery of risedronate sodium (RS). MATERIALS AND METHODS: Surface morphology of the microspheres was studied and they were characterized for entrapment efficiency (%EE), particle size, and porosity as well as aerodynamic and flow properties. Selected formulae were investigated for in vitro drug release and deposition behavior using next generation impactor. Furthermore, the safety of the free drug and the selected prepared systems was assessed by MTT viability test performed on Calu-3 cell line. RESULTS AND DISCUSSION: The current work revealed that HP-ß-CD produced open-pored microspheres, while oils produced closed pored microspheres. Modulation of preparation parameters generated porous RS microspheres with high %EE, sustained drug release profile up to 15 days, suitable geometric and aerodynamic particle sizes and excellent flow properties. The safety of HP-ß-CD systems was higher than the systems utilizing oil as porogen. CONCLUSION: Porogen type affected the behavior of the microspheres as demonstrated by the various characterization experiments, with microspheres prepared using HP-ß-CD being superior to those prepared using oils as porogens.

Assessment of antifungal efficacy of itraconazole loaded aspasomal cream: comparative clinical study.

Topical conveyance of antifungal agents like itraconazole ITZ has been giving good grounds for expecting felicitous antifungal medicines. The defiance of topical delivery of this poorly water soluble and high-molecular-weight drug, however, mightily entail an adequate vehiculation. ITZ aspasomes, newer antioxidant generation of liposomes, have been designed and enclosed in a cream to ameliorate skin deposition. The proposed creams containing non-formulated ITZ or encapsulated in aspasomes (0.1% or 0.5%) were topically applied in patients with diagnosed diaper dermatitis complicated by candidiasis, tinea corporis (TC), and tinea versicolor (TVC). Placebos (void aspasomal cream and cream base) were also utilized. The obtained results for diaper rash revealed that aspasomal cream (0.5% ITZ) was eminent with respect to complete cure and negative candida culture after 10-day therapy relative to counterparts containing 0.1% ITZ aspasomes or non-formulated ITZ (0.1% and 0.5%). For tinea, the same trend was manifested in terms of 'cleared' clinical response in 90% of patients and absence of fungal elements after 4-week treatment. Relative to non-formulated ITZ, ITZ aspasomal cream was endorsed to be auspicious especially when ITZ concentration was lowered to half commercially available cream concentration (1%), pushing further exploitation in other dermal fungal infections.

Optimized formulation for topical administration of clotrimazole using Pemulen polymeric emulsifier.

BACKGROUND: Emulgel topical formulation is a vehicle of potential for topical delivery of antifungal drugs. METHODS: The imidazole derivative antifungal drug, clotrimazole (CZ), was formulated into emulgels using two grades of hydrophobically modified co-polymers of acrylic acid, namely Pemulen TR1 and TR2. The prepared emulgels were evaluated for their rheological properties, short- and long-term stability, in vitro release at 37°C. Microbiological evaluation of the formula showed that optimum stability and release was carried out to measure its antifungal activity. RESULTS: All formulae showed non-Newtonian shear thinning behavior with little thixotropy or antithixotropy. Five of the prepared formulae showed good physical stability under different treatment conditions. Isopropyl myristate (IPM) emulgels exhibited higher rate of CZ release than either jojoba oil (JB) or liquid paraffin-based emulgels. A selected formula containing JB together with a combination of Pemulen TR1 and TR2 showed excellent stability as well as high rate of CZ release. Microbiological evaluation of the selected formula containing similar amount of CZ revealed 1.2-folds increase in the antifungal activity compared to commercially available formulation. CONCLUSION: Emulgel dosage form based on Pemulen polymeric emulsifier and JB is a promising vehicle for topical delivery of CZ and further in vivo animal studies are recommended.

Novel jojoba oil-based emulsion gel formulations for clotrimazole delivery.

Jojoba oil-based emulgel formulations were prepared using different concentrations of various gelling agents, such as hydroxypropyl methylcellulose (HPMC) and Carbopol 934 P and combination of both. The prepared emulgels were physically evaluated for their stability after temperature cycle test, centrifugation and long-term shelf storage for 1 year at room temperature. The in vitro release at 37 °C was studied to define the effect of the concentration and type of the gelling agent. A comparison between the formulated emulgels and two commercially available products, Candistan® and Canesten® creams, was carried out to judge their efficacy and stability. The prepared emulgels exhibited non-Newtonian shear thinning behavior with little or no thixotropy. Four emulgels showed excellent stability as they demonstrated consistent rheological model under different treatment conditions. The in vitro release test showed variation in the extent of percent drug released. The drug release from the commercial preparation was lower than some of the prepared emulgel formulae. One formula containing combination of the two gelling agents (HPMC and Carbopol 934 P), showed excellent stability and high extent of clotrimazole release was microbiologically evaluated against Candida albicans using cylinder and plate method. The selected formula showed superior antimycotic activity compared to the commercially available formulation. Further in vivo animal studies for the obtained stable formula is recommended.

Augmented cytotoxicity using the physical adsorption of Poloxamer 188 on allicin-loaded gelatin nanoparticles.

OBJECTIVES: The aim of this work was to study the effect of the physically adsorbed Poloxamer 188 coating polymer on the cytotoxic activity of allicin-loaded gelatin nanoparticles. METHODS: The double desolvation method was utilised to prepare the nanoparticles which were characterised for particle size (PS), polydispersity index (PDI) and zeta potential and visualised using transmission electron microscopy. The coating density of the used polymer was determined using 1H-nuclear magnetic resonance (1H-NMR); 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay was used to evaluate the cytotoxicity on HepG-2 cell lines. KEY FINDINGS: The particles were spherical possessing a PS of 714 ± 25.21 nm and a PDI of 0.663 ± 0.143. These results together with the 1H-NMR results analysis confirmed the efficient coating of Poloxamer 188. The coating of particles rendered them more cytotoxic, scoring an IC50 of 6.736 µm (2-folds lower than the uncoated counter parts and 4-folds lesser than the allicin solution), and apt for cancer-targeting. Moreover, the prepared nanoparticles were stable to gamma-sterilisation and to a storage of 12 months. CONCLUSIONS: Augmented cytotoxicity on HepG-2 cell lines was obtained using the physical adsorption of an abundant and relatively cheap material, Poloxamer 188, on allicin-loaded gelatin nanoparticles.

Uptake of microemulsion components into the stratum corneum and their molecular effects on skin barrier function.

This research determined the uptake of individual components of topically applied microemulsions into the stratum corneum (SC) and assessed their molecular effects on skin barrier function. The microemulsions comprised oleic acid, Tween20, Transcutol and water. The effects of selected formulations, and of the individual components, on the conformational order of the SC intercellular lipids, and on SC hydration, were assessed by infrared spectroscopy. Measurements were made as a function of SC depth by progressively tape-stripping the membrane in the normal way. SC uptake of microemulsion components was quantified via extraction and analysis of the collected tape strips. SC hydration increased in proportion to the water content of the microemulsion. Each of the microemulsion components penetrated into the SC, but to different extents. Oleic acid decreased the conformational order of the SC lipids, and induced some phase separation, as revealed by the frequency shifts and peak areas of the absorbances associated with -CH(2) symmetric and asymmetric stretching vibrations. Tween20 extracted some of the SC intercellular lipids. In summary, SC structure was perturbed by all components of the microemulsions, and the degree of the effects detected was proportional to the level of the respective component present in the skin.

Polypeptide and glycosaminoglycan polysaccharide as stabilizing polymers in nanocrystals for a safe ocular hypotensive effect.

Improved ocular delivery of a poorly soluble anti-glaucoma drug, acetazolamide (ACZ), in a stable nanosuspension (NS) was the main target of the study. The anionic polypeptide, poly-γ-glutamic acid (PG) and the glycosaminoglycan, hyaluronic acid, were used to stabilize ACZ-NS prepared using the antisolvent precipitation (AS-PT) coupled with sonication technique. To endue in site biocompatibility with high tolerability, soya lecithin (SL) phospholipid has been also combined with polyvinyl alcohol (PVA). NS with uniform PS in the range 100-300 nm, high ζ > ±20 mV, and enhanced saturation solubility were produced. Targeting solvent removal with control on future particle growth, post-production processing of NS was done using spray drying. The carriers' composition and amount relative to ACZ-NS were optimized to allow for the production of a redispersible dry crystalline powder. Particles crystallinity was confirmed using X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) in liquid and spray dried NS. The modified Draize test proved the safety and tolerability following application to rabbit eyes accompanying an efficient ocular hypotensive activity using a steroid glaucoma model.

Near IR responsive targeted integrated lipid polymer nanoconstruct for enhanced magnolol cytotoxicity in breast cancer.

Advances in cancer nanotechnology aim at improving specificity and effectiveness for tumor treatment. Amalgamation of different treatment modalities is expected to provide better cancer combating. Herein, We developed a long circulating nanocarrier comprising trastuzumab (TZB) surface modified polylactic-co-glycolic acid (PLGA) nanoparticles (NPs) co-encapsulating magnolol (Mag) and gold nanoparticles (GNPs). A modified single step nanoprecipitation method was adopted ensuring particle coating with D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) while co-encapsulating GNPs. TZB was then anchored on NPs surface using a carbodiimide chemistry. The cytotoxicity of the developed system was evaluated with and without photothermal irradiation. NPs cellular uptake was then followed using confocal microscopical imaging. A hybrid matrix composed of PLGA/TPGS and surface decorated with TZB with a conjugation efficiency of ˃65%, was confirmed via FTIR, 1HNMR. GNPs could only be included in the NPs, when placed in the organic phase as evidenced by the shifted GNPs surface plasmonic resonance and confirmed via imaging coupled with energy dispersive X-ray analysis. Optimized NPs (136.1 ± 1.3 nm, -8.2 ± 1 mV and Mag encapsulation efficiency of 81.4 ± 1.8%) were able to boost Mag cytotoxicity on breast cancer cells while providing a selective multifunctional therapy with an added photothermal effect.

Preparation of intravenous stealthy acyclovir nanoparticles with increased mean residence time.

A major cause of thromboplebitis, during acyclovir (ACV) parenteral administration is the high pH of its reconstituted solution (pH 11). Its plasma half life is 2.5 h, requiring repeated administration which may result in excess of drug solubility leading to possible renal damage and acute renal failure. The present study reports the efficiency of stealthy ACV nanoparticles (NPs) to increase the mean residence time of the drug 29 times. It caused a marked decrease in thrombophlebitis when injected into rabbit's ear vein. The polymers used were (Poly lactic acid, polylactic-co-glycolic (PLGA) 85/15, PLGA 75/25, PLGA 50/50). Particles were evaluated for their encapsulation efficiency, morphology, particle size and size distribution, zeta potential, and in vitro drug release. Small NPs (280-300 nm) with 60% drug release after 48 h were obtained. Among the block copolymer used, poloxamer 407 was of superior coating properties with a coat thickness in the range of 1.5-8.3 nm and a decreased surface charge.

Colloidal (-)-epigallocatechin-3-gallate vesicular systems for prevention and treatment of skin cancer: A comprehensive experimental study with preclinical investigation.

Skin carcinogenesis is a common malignancy affecting humans worldwide, which could benefit from nutraceuticals as a solution to the drawbacks of conventional skin cancer treatment. (-)-epigallocatechin-3-gallate (EGCG) is a promising nutraceutical in this regard; however, it suffers chemical instability and low bioavailability resulting in inefficient delivery. Therefore, EGCG encapsulation in ultradeformable colloidal vesicular systems, namely: penetration enhancer-containing vesicles (PEVs), ethosomes and transethosomes (TEs) for topical administration has been attempted in this study to overcome the problems associated with the use of free EGCG. The prepared vesicles were characterized for their entrapment efficiency, TEM visualization, chemical compatibility, antioxidant properties, ex-vivo skin deposition, photodegradation and physical stability after storage. Most of the prepared vesicles exhibited reasonable skin deposition and preservation of the inherent antioxidant properties of EGCG with good physical stability. EGCG-loaded PEVs and TEs exhibited an inhibitory effect on epidermoid carcinoma cell line (A431) in addition to reduced tumor sizes in mice, confirmed with histopathological analysis and biochemical quantification of skin oxidative stress biomarkers; glutathione, superoxide dismutase and catalase, as well as lipid peroxidation. EGCG PEVs succeeded in offering an effective delivery system targeting skin cancer, which is worthy of further experimentation.

Ocular poloxamer-based ciprofloxacin hydrochloride in situ forming gels.

The purpose of this study was to develop poloxamer-based in situ gelling formulations of ciprofloxacin hydrochloride (HCl) aiming at prolonging corneal contact time, controlling drug release, enhancing ocular bioavailability, and increasing patient compliance. The in situ forming gels were prepared using different concentrations of poloxamer 407 (P407) and poloxamer 188 (P188). Mucoadhesives such as hydroxypropylmethyl cellulose (HPMC) or hydroxyethyl cellulose (HEC) were added to the formulations to enhance the gel bioadhesion properties. The prepared formulations were evaluated for their in vitro drug release, sol-gel transition temperature, rheological behavior, and mucoadhesion force. The in vivo antimicrobial efficacy of selected ciprofloxacin HCl in situ gelling formulations was studied on infected rabbit's eyes and compared with that of the marketed conventional eye drops. The gelation temperature of the prepared formulations ranged from 28.00 to 34.03 degrees C. Increasing the concentrations of P407, HPMC, and HEC increased the viscosity and mucoadhesion force of the preparations and decreased the in vitro drug release. Ciprofloxacin HCl in situ forming gel formulae composed of P407/P188/HPMC (18/13/1.5%, wt/wt), and P407/P188/HEC (18/13/0.5%, wt/wt) showed optimum release and mucoadhesion properties and improved ocular bioavailability as evidenced by an enhanced therapeutic response compared with the marketed conventional eye drops.

Lipospheres as carriers for topical delivery of aceclofenac: preparation, characterization and in vivo evaluation.

The purpose of this study was to prepare lipospheres containing aceclofenac intended for topical skin delivery with the aim of exploiting the favorable properties of this carrier system and developing a sustained release formula to overcome the side effects resulting from aceclofenac oral administration. Lipospheres were prepared using different lipid cores and phospholipid coats adopting melt and solvent techniques. Characterization was carried out through photomicroscopy, scanning electron microscopy, particle size analysis, DSC, In vitro drug release and storage study. The anti-inflammatory effect of liposphere systems was assessed by the rat paw edema technique and compared to the marketed product. Results revealed that liposphere systems were able to entrap aceclofenac at very high levels (93.1%). The particle size of liposphere systems was well suited for topical drug delivery. DSC revealed the molecular dispersion of aceclofenac when incorporated in lipospheres. Both entrapment efficiency and release were affected by the technique of preparation, core and coat types, core to coat ratio and drug loading. Lipospheres were very stable after 3 months storage at 2-8 degrees C manifested by low leakage rate (less than 7%) and no major changes in particle size. Finally, liposphere systems were found to possess superior anti-inflammatory activity compared to the marketed product in both lotion and paste consistencies. Liposphere systems proved to be a promising topical system for the delivery of aceclofenac as they possessed the ability to entrap the drug at very high levels and high stability, and to sustain the anti-inflammatory effect of the drug.

Liposomes as an ocular delivery system for acetazolamide: in vitro and in vivo studies.

The purpose of this study was to formulate topically effective controlled release ophthalmic acetazolamide liposomal formulations. Reverse-phase evaporation and lipid film hydration methods were used for the preparation of reverse-phase evaporation (REVs) and multilamellar (MLVs) acetazolamide liposomes consisting of egg phosphatidylcholine (PC) and cholesterol (CH) in the molar ratios of (7:2), (7:4), (7:6), and (7:7) with or without stearylamine (SA) or dicetyl phosphate (DP) as positive and negative charge inducers, respectively. The prepared liposomes were evaluated for their entrapment efficiency and in vitro release. Multilamellar liposomes entrapped greater amounts of drug than REVs liposomes. Drug loading was increased by increasing CH content as well as by inclusion of SA. Drug release rate showed an order of negatively charged > neutral > positively charged liposomes, which is the reverse of the data of drug loading efficiency. Physical stability study indicated that approximately 89%, 77%, and 69% of acetazolamide was retained in positive, negative, and neutral MLVs liposomal formulations up to a period of 3 months at 4 degrees C. The intraocular pressure (IOP)-lowering activity of selected acetazolamide liposomal formulations was determined and compared with that of plain liposomes and acetazolamide solution. Multilamellar acetazolamide liposomes revealed more prolonged effect than REVs liposomes. The positively charged and neutral liposomes exhibited greater lowering in IOP and a more prolonged effect than the negatively charged ones. The positive multilamellar liposomes composed of PC:CH:SA (7:4:1) molar ratio showed the maximal response, which reached a value of -7.8 +/- 1.04 mmHg after 3 hours of topical administration.

Defining cisplatin incorporation properties in thermosensitive injectable biodegradable hydrogel for sustained delivery and enhanced cytotoxicity.

Injectable thermoreversible chitosan (CS)/ß-glycerophosphate (ß-GP) hydrogels were developed for prolonged localized delivery of cisplatin (Cis). The effects of formulation variables on the thermoreversible hydrogels preparation as well as the impact of drug incorporation method on Cis release were studied. Antitumor activity of Cis CS/ß-GP thermoreversible hydrogels were evaluated against HCT-116 human colorectal cancer cells and MCF-7 human breast cancer cells. Incorporation of Cis to CS solution adjusted at pH 6.2 prior to hydrogel preparation deemed necessary to achieve a sustained release up to 4 days. Cis loaded CS/ß-GP thermoreversible hydrogels showed enhanced antitumor activity with about 1.2 fold and 2.05 fold that of Cis solution against HCT-116 cancer cells and MCF-7 cancer cells respectively. The obtained enhanced antitumor activity elected this delivery system for further in vivo and toxicological investigations.

Polyethylene glycol conjugated polymeric nanocapsules for targeted delivery of quercetin to folate-expressing cancer cells in vitro and in vivo.

In this work we describe the formulation and characterization of chemically modified polymeric nanocapsules incorporating the anticancer drug, quercetin, for the passive and active targeting to tumors. Folic acid was conjugated to poly(lactide-co-glycolide) (PLGA) polymer to facilitate active targeting to cancer cells. Two different methods for the conjugation of PLGA to folic acid were employed utilizing polyethylene glycol (PEG) as a spacer. Characterization of the conjugates was performed using FTIR and (1)H NMR studies. The PEG and folic acid content was independent of the conjugation methodology employed. PEGylation has shown to reduce the size of the nanocapsule; moreover, zeta-potential was shown to be polymer-type dependent. Comparative studies on the cytotoxicity and cellular uptake of the different formulations by HeLa cells, in the presence and absence of excess folic acid, were carried out using MTT assay and Confocal Laser Scanning Microscopy, respectively. Both results confirmed the selective uptake and cytotoxicity of the folic acid targeted nanocapsules to the folate enriched cancer cells in a folate-dependent manner. Finally, the passive tumor accumulation and the active targeting of the nanocapsules to folate-expressing cells were confirmed upon intravenous administration in HeLa or IGROV-1 tumor-bearing mice. The developed nanocapsules provide a system for targeted delivery of a range of hydrophobic anticancer drugs in vivo.

Spray dried inhalable ciprofloxacin powder with improved aerosolisation and antimicrobial activity.

In this study, the spray drying technique was used to prepare ciprofloxacin microparticles (CFX-MPs) for pulmonary administration. By virtue of its amphoteric properties, CFX was dissolved in either a slightly alkaline or acidic solution depending on the used polymer. Dextran and chitosan were used to prepare the MPs and modify the release characteristics of the drug. Particle surface modification was done with either DPPC or PEG. The effects of the manufacturing and formulation parameters on the drug-polymer interactions were investigated by thermal analysis and infrared spectroscopy. CFX-MPs showed improved aerosolisation properties and the encapsulated drug possessed high antimicrobial activity against two of the common and resistant respiratory pathogens: Pseudomonas aeruginosa and Staphylococus aureus. MPs were safe on the lung epithelial cells. Modulation of particle characteristics and drug release was possible by altering not only the polymer but also the type of the acid from which the powders were spray dried. MPs prepared with glutamic and aspartic acids showed better characteristics than those prepared with acetic and hydrochloric acids. Dextran modified particles showed improved aerosolisation properties and safety on lung epithelial cells.

A comparative study of chitosan shielding effect on nano-carriers hydrophilicity and biodistribution.

Engineering polymer surfaces reduces nanoparticles (NPs) aggregation and phagocytosis due to effective shielding, hindering recognition by the reticuloendothelial system (RES). The shielding of NPs is complex and affected by the type of groups used in terms of charge and hydrophilicity. This will, in turn, affect NPs biodistribution which will determine the length of activity of the drug. Polysaccharides are nowadays recognized for decreasing the uptake of particulate carriers by the mononuclear phagocytic system (MPS). Chitosan is considered as an attractive candidate due to its biocompatibility, biodegradability, non-toxicity and low cost. In this study clozapine (CZP)-loaded NPs were coated with chitosan, pluronic F-68, polyethylene glycol (PEG) 4000 and polysorbate 80. The factors affecting drug encapsulation efficiency, particle size, surface charge, surface hydrophilicity, pharmacokinetics and biodistribution were studied. The results proved that although a similarity in surface hydrophilicity, chitosan-stealth NPs showed different pharmacokinetic profile and biodistribution behavior compared to polysorbate-stealth NPs.