RESUMEN
PURPOSE: To design a checklist in order to reduce the frequency of reconstructive preventable errors (PE) performed by undergraduate dental students at McGill University. MATERIALS AND METHODS: The most common PE occurring at a university dental clinic were identified by three reviewers analyzing the refunded cases, and used to create a preliminary checklist. This checklist was then validated by a panel of dental educators to produce a finalized 20-item checklist. The 20-question checklist was then submitted to students in a cross-sectional survey-based study to evaluate its relevance to undergraduate clinical education needs. RESULTS: As many as 81% of students reported to have forgotten at least one item of the checklist during care of their last patient, and the most forgotten checklist items corresponded to the pretreatment stage. The students also reported that 17 of the 20 items in the checklist were relevant to a considerable extent or highly relevant. CONCLUSION: Common PE identified in the undergraduate clinic could be used to create a checklist of relevant items designed to reduce errors made by students and practitioners performing prosthodontic and reconstructive treatments. However, further studies are required to evaluate the implementation and efficiency of the checklist.
Asunto(s)
Lista de Verificación , Estudiantes de Odontología , Estudios Transversales , Humanos , Prostodoncia , Encuestas y CuestionariosRESUMEN
STATEMENT OF PROBLEM: Clinical data regarding newly introduced laser-sintered removable partial dentures (RPDs) are needed before this technique can be recommended. Currently, only a few clinical reports have been published, with no clinical studies. PURPOSE: This clinical trial compared short-term satisfaction in patients wearing RPDs fabricated with conventional or computer-aided design and computer-aided manufacturing (CAD-CAM) laser-sintering technology. MATERIAL AND METHODS: Twelve participants with partial edentulism were enrolled in this pilot crossover double-blinded clinical trial. Participants were randomly assigned to wear cast or CAD-CAM laser-sintered RPDs for alternate periods of 30 days. The outcome of interest was patient satisfaction as measured using the McGill Denture Satisfaction Instrument. Assessments was conducted at 1, 2, and 4 weeks. The participant's preference in regard to the type of prosthesis was assessed at the final evaluation. The linear mixed effects regression models for repeated measures were used to analyze the data, using the intention-to-treat principle. To assess the robustness of potential, incomplete adherence, sensitivity analyses were conducted. RESULTS: Statistically significant differences were found in patients' satisfaction between the 2 methods of RPD fabrication. Participants were significantly more satisfied with laser-sintered prostheses than cast prostheses in regard to general satisfaction, ability to speak, ability to clean, comfort, ability to masticate, masticatory efficiency, and oral condition (P<.05). At the end of the study, 5 participants preferred the laser-sintered, 1 preferred the cast RPD, and 3 had no preference. CONCLUSIONS: The use of CAD-CAM laser-sintering technology in the fabrication of removable partial dentures may lead to better outcomes in terms of patient satisfaction in the short term. The conclusion from this pilot study requires confirmation by a larger randomized controlled trial. CLINICAL TRIAL: ClinicalTrials.gov. A study about patient satisfaction with laser-sintered removable partial dentures; NCT02769715.
Asunto(s)
Diseño Asistido por Computadora , Diseño de Dentadura/métodos , Dentadura Parcial Removible , Rayos Láser , Satisfacción del Paciente , Anciano , Estudios Cruzados , Método Doble Ciego , Femenino , Humanos , Masculino , Persona de Mediana Edad , Proyectos PilotoRESUMEN
PURPOSE: Bone allograft onlays have great potential in alveolar bone augmentation. However, no comparable cohort study is available in the literature showing whether implants placed in bone augmented with allograft onlays would have a success rate comparable to those placed in native alveolar bone. The objective of the cohort study was to investigate whether the quality of bone augmented with allograft onlays was sufficient to place dental implants and achieve success rates comparable to those in un-grafted bone. MATERIALS AND METHODS: Two cohort studies were performed in 46 and 369 patients, respectively. In the first study, the quality and quantity of bone augmented with allograft onlays (21 patients received 68 allograft onlays) were assessed and compared with those of native alveolar bone (25 patients) using histologic techniques. In the second study, the performance of implants placed in allograft-augmented bone (16 patients) was assessed and compared with implants placed in autograft-augmented bone (43 patients) and native alveolar bone (310 patients). RESULTS: The first study showed no significant differences (P = .33) in bone volume between bone augmented with allograft onlay and native alveolar bone. The second study showed that the success rates of implants placed in native bone (95.8%), autograft-augmented bone (96.4%), and allograft-augmented bone (96.8%) were similar to one another. CONCLUSION: The quantity and quality of allograft-augmented bone are similar to those of host native alveolar bone, and the success rate of implants placed in allograft onlays is comparable to those placed in autograft onlays or native alveolar bone.
Asunto(s)
Aumento de la Cresta Alveolar , Trasplante Óseo , Implantación Dental Endoósea , Trasplante Homólogo , Adulto , Anciano , Estudios de Cohortes , Femenino , Humanos , Masculino , Persona de Mediana Edad , Falla de PrótesisRESUMEN
STATEMENT OF PROBLEM: Matrices of unsplinted attachment systems are generally reported to be the weak component of implant overdentures, often requiring frequent maintenance. Clinical wear results in reduced retention of the prosthesis, requiring activation or renewal of the matrix to restore the initial level of retention. PURPOSE: The purpose of this retrospective study was to measure the wear of the matrix of a ball attachment after various periods of clinical wear. MATERIAL AND METHODS: Seventy specimens of 3 groups of matrices of ball attachments that had been in use for mean periods of 12.3 months (1Y group, n=26), 39.0 months (3Y group, n=28) and 95.6 months (8Y group, n=16) were retrieved from 35 patients (2 specimens per patient) and measured on a coordinate measuring machine equipped with a touch trigger probe. Ten unused matrices were used as controls (CTRL group). The external and internal matrix diameters and deviations from circularity were measured. For the various time periods, the decreases in matrix thickness were calculated and compared with controls. Kruskal-Wallis 1-way ANOVA by ranks, followed by the Mann-Whitney post hoc tests, were conducted to test for differences in median values among groups (α =.05). RESULTS: For the internal upper diameter of the matrices tested, the Kruskal-Wallis and Mann-Whitney tests revealed significant differences for the 3 groups compared to the controls. For group 1Y, a significant difference (P<.001) of the internal upper diameter was found compared to the CTRL group. Compared to the controls, the nonparametric analyses for groups 3Y and 8Y showed significant differences for the internal upper diameter (P<.001) and deviations from circularity (P<.001). For groups 1Y, 3Y and 8Y, matrix thickness losses were 07, 47 and 70 µm, respectively. CONCLUSIONS: Within the limitations of this study, it was observed that one year of clinical wear had limited effect on the ball attachment matrices. Three to 8 years of clinical use resulted in a significant decrease of matrix thickness, especially at the tip of the retentive lamellae.
Asunto(s)
Pilares Dentales , Alisadura de la Restauración Dental , Retención de Dentadura/instrumentación , Prótesis de Recubrimiento , Prótesis Dental de Soporte Implantado , Dentadura Completa Inferior , Estudios de Seguimiento , Aleaciones de Oro/química , Humanos , Ensayo de Materiales , Estudios Retrospectivos , Propiedades de SuperficieRESUMEN
OBJECTIVES: Implant-supported overdentures have become the treatment of choice in restoring complete edentulism, but the types of attachment to assure durable retention are a subject of debate. Ball attachments were reported as a simple treatment, but wear of components was responsible for a decrease in retention. The aim of this retrospective study was to measure the wear of the ball abutment or patrix after three different periods of clinical wear. MATERIAL AND METHODS: Sixty-nine specimens of three groups of patrix that were in use for a mean of 12.3 months (group A), 39 months (group B) and 95.6 months (group C) were retrieved from 35 patients and measured on a coordinate measuring machine equipped with a touch trigger probe. Ten unused ball abutments were added as a control (group D). The patrix diameters and any deviation from circularity in different axes were measured. RESULTS: The diameters of groups A, B and C were significantly different from that of group D (control). No statistically significant differences were found between diameter and circularity variations between groups B and C. The maximal amount of diameter reduction was limited to approximately 30 µm, and 90% of diameter loss at the equator due to wear was reached in group B. CONCLUSION: One, 3 and 8 years of clinical wear reduced significantly the diameters of the ball abutments tested, and the maximal amount of wear was reached after 3 years of clinical use.
Asunto(s)
Prótesis Dental de Soporte Implantado , Alisadura de la Restauración Dental , Retención de Dentadura/instrumentación , Prótesis de Recubrimiento , Implantes Dentales , Estudios de Seguimiento , Humanos , Estudios Retrospectivos , Propiedades de SuperficieRESUMEN
PURPOSE: This study sought to define the tissue responses at different implant-abutment interfaces by studying bone and peri-implant mucosal changes using a 5-year prospective randomized clinical trial design study. The conus interface was compared with the flat-to-flat interface and platform-switched implant-abutment systems. MATERIALS AND METHODS: One hundred forty-one subjects were recruited and randomized to the three treatment groups according to defined inclusion and exclusion criteria. Following implant placement and immediate provisionalization in healed alveolar ridges, clinical, photographic, and radiographic parameters were measured at 6 months and annually for 5 years. The calculated changes in marginal bone levels, peri-implant mucosal zenith location, papillae lengths, and peri-implant Plaque Index and bleeding on probing were statistically compared. RESULTS: Forty-eight conus interface implants, 49 flat-to-flat interface implants, and 44 platform-switched implants were placed in 141 subjects. Six platform-switched interface and eight flatto- flat interface implants failed, most of them within 3 months. After 5 years, 33 conical interface, 28 flat-to-flat interface, and 27 platform-switched interface implants remained for evaluation. Calculation of marginal bone level change showed a mean marginal bone loss of -0.16 ± 0.45 (-1.55 to 0.65), -0.92 ± 0.70 (-2.90 to 0.20), and -0.81 ± 1.06 (-3.35 to 1.35) mm for conical interface, flat-to-flat interface, and platform-switched interface implants, respectively (P < .0005). The peri-implant mucosal zenith changes were minimal for all three interface designs (0.10 mm and +0.08 mm, P > .60). Only 16% to 19% of the surfaces had presence of bleeding on probing, with no significant differences (P > .81) between groups. Interproximal tissue changes were positive and similar among the implant interface designs. CONCLUSION: Over 5 years, the immediate provisionalization protocol resulted in stable peri-implant mucosal responses for all three interfaces. Compared with the flat-to-flat and platform-switched interfaces, the conical interface implants demonstrated significantly less early marginal bone loss. The relationship of marginal bone responses and mucosal responses requires further experimental consideration.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales de Diente Único , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Coronas , Estética Dental , Humanos , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Estudios ProspectivosRESUMEN
OBJECTIVE: The immediate loading of implant-assisted fixed prostheses in edentulous maxillae may achieve favorable success rates with reduced treatment time. An evidence summary of clinical trials is key to recommend loading protocols in these cases. OBJECTIVES: To compare immediately loaded, fully implant-supported complete dentures to early and conventional/delayed loading in the edentulous maxillae of adult patients by a systematic review of controlled clinical trials (CCT). METHODOLOGY: CCTs reports were identified up to January 17, 2019 from Cochrane Oral Health Group's Trial register, Cochrane Central Register of controlled trials (CENTRAL), MEDLINE (Ovid), BIOSIS, EMBASE, CINAHL, Web of Science, and DARE. Two independent reviewers screened titles/abstracts and confirmed inclusion using full texts. Data were extracted and quality assessed (Cochrane Risk of Bias tool) independently and in duplicate. Study heterogeneity prevented pooling by meta-analysis. RESULTS: Out of 1,052 candidate studies, four CCTs were included. Two trials had patient satisfaction as an outcome: (1) A randomized trial compared immediately and early loaded fixed dentures and found more satisfaction with the first after 12 months; (2) A non-randomized study found better satisfaction with immediate fixed dentures compared to conventional loading after 3 months (no more at 12 months). Regarding implant success and prosthetic complications, three trials did not report significant differences comparing immediate loading to other protocols. CONCLUSIONS: This review found weak evidence of differences between immediate load and other loading regimens, regarding patient satisfaction and maintenance events/adversities. The potential of immediate loading for favorable results in edentulous maxillae reinforces the need for well-designed RCTs, for solid clinical guidelines. Registration number CRD42018071316 (PROSPERO database).
Asunto(s)
Prótesis Dental de Soporte Implantado/métodos , Dentadura Completa , Carga Inmediata del Implante Dental/métodos , Ensayos Clínicos Controlados como Asunto , Humanos , Sesgo de Publicación , Factores de Riesgo , Resultado del TratamientoRESUMEN
PURPOSE: The goal of this investigation was to define time-dependent peri-implant tissue changes at implants with different abutment interface designs. MATERIALS AND METHODS: Participants requiring replacement of single maxillary anterior and first premolar teeth were recruited and treated under an institutional review board (IRB)-approved protocol. Implants, titanium abutments, and provisional crowns were placed in healed ridges 5 months following preservation after tooth extraction with recombinant human bone morphogenetic protein-2 (rhBMP-2). Twelve weeks later, permanent crowns were placed on patient-specific abutments and evaluated at 6, 12, and 36 months following implant placement. Clinical and radiographic assessments of abutments and crowns, peri-implant mucosa, and marginal bone levels were recorded. RESULTS: The 3-year assessment included 45 conical interface (CI), 34 flat-to-flat interface (FI), and 32 platform-switched interface (PS) implants in 111 participants. At 3 years, the mean marginal bone level (MBL) change at CI, FI, and PS implants was -0.12, -1.02, and -1.04 mm, respectively (P = .014). "Zero" MBL loss or gain was measured over the 3-year period at 72.1% CI, 3.0% FI, and 16.6% PS implants. There was a minor change (0.0 to 0.3 mm) in peri-implant mucosal zenith positions over time and between groups. Eighty percent of CI implants, 61% of FI implants, and 84% of PS implants were observed to have a clinically stable peri-implant mucosal zenith position with less than 0.5 mm of measured recession. Over the 36-month period, there were no significant changes in the location of mesial or distal papilla in any group. CONCLUSION: Significant differences in MBLs were observed at different implant interfaces. Conical implant interfaces, but not flat-to-flat or platform-switched implant interfaces, were associated with no MBL changes over 3 years. Peri-implant mucosal stability was generally observed. The relationship of marginal bone responses and peri-implant mucosal stability requires further evaluation.
Asunto(s)
Coronas , Pilares Dentales , Implantes Dentales de Diente Único , Maxilar/cirugía , Adulto , Pérdida de Hueso Alveolar , Diente Premolar , Diseño de Prótesis Dental , Estética Dental , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Titanio , Extracción DentalRESUMEN
Abstract The immediate loading of implant-assisted fixed prostheses in edentulous maxillae may achieve favorable success rates with reduced treatment time. An evidence summary of clinical trials is key to recommend loading protocols in these cases. Objectives To compare immediately loaded, fully implant-supported complete dentures to early and conventional/delayed loading in the edentulous maxillae of adult patients by a systematic review of controlled clinical trials (CCT). Methodology CCTs reports were identified up to January 17, 2019 from Cochrane Oral Health Group's Trial register, Cochrane Central Register of controlled trials (CENTRAL), MEDLINE (Ovid), BIOSIS, EMBASE, CINAHL, Web of Science, and DARE. Two independent reviewers screened titles/abstracts and confirmed inclusion using full texts. Data were extracted and quality assessed (Cochrane Risk of Bias tool) independently and in duplicate. Study heterogeneity prevented pooling by meta-analysis. Results Out of 1,052 candidate studies, four CCTs were included. Two trials had patient satisfaction as an outcome: (1) A randomized trial compared immediately and early loaded fixed dentures and found more satisfaction with the first after 12 months; (2) A non-randomized study found better satisfaction with immediate fixed dentures compared to conventional loading after 3 months (no more at 12 months). Regarding implant success and prosthetic complications, three trials did not report significant differences comparing immediate loading to other protocols. Conclusions This review found weak evidence of differences between immediate load and other loading regimens, regarding patient satisfaction and maintenance events/adversities. The potential of immediate loading for favorable results in edentulous maxillae reinforces the need for well-designed RCTs, for solid clinical guidelines. Registration number CRD42018071316 (PROSPERO database).
Asunto(s)
Humanos , Prótesis Dental de Soporte Implantado/métodos , Dentadura Completa , Carga Inmediata del Implante Dental/métodos , Factores de Riesgo , Resultado del Tratamiento , Sesgo de Publicación , Ensayos Clínicos Controlados como AsuntoAsunto(s)
Atención Odontológica , Administración Oral , Conservadores de la Densidad Ósea/administración & dosificación , Atención Dental para Enfermos Crónicos , Implantación Dental Endoósea/métodos , Implantes Dentales , Prótesis Dental de Soporte Implantado , Prótesis de Recubrimiento , Difosfonatos/administración & dosificación , Humanos , Inyecciones Intravenosas , Enfermedades Maxilomandibulares/prevención & control , Osteonecrosis/prevención & control , Sistemas de Atención de Punto , Intensificación de Imagen Radiográfica/normas , Radiografía Dental Digital/normas , Factores de RiesgoRESUMEN
OBJECTIVES: The mechanism of tooth bleaching using peroxide oxidizers is not fully understood. It is unknown whether peroxide radicals make teeth whiter by deproteinizing, demineralizing, or oxidizing tooth tissues. This study was designed to define the mechanism of tooth bleaching and determine which of tooth enamel chemical components is/are affected by bleaching. METHODS: Sixty sound teeth were collected from adult patients. The teeth were divided into 6 equal groups (n=10). Groups 1, 2, 3 and 4 were treated for 4 days with one of the following solutions: deproteinizing (NaOH) that removes organic content, demineralizing (EDTA) that decalcifies the mineral content, oxidizing (H(2)O(2)) and distilled water (control). Group 5 and 6 were pre-treated with either deproteinizing or demineralizing solutions before treating them with oxidizing solutions for 4 days. Changes in enamel elemental ratios, crystallinity index and tooth shade parameters of the treated teeth were examined by means of EDS, Raman spectroscopy and shade-spectrophotometry. The data obtained was analysed with Wilcoxon Signed-Ranks Test, and the statistical signiï¬cance was set at p<0.05. RESULTS: Tooth deproteinization increased the lightness by 4.8 ± 2.7°, tooth demineralization resulted in 8.5 ± 5.6° decrease in the lightness and tooth oxidization induced 19.9 ± 6.5° increase in the lightness. Oxidization of the deproteinized teeth did not influence shade parameters, but oxidation of the demineralized teeth resulted in 10.7 ± 5.8° increase in the lightness. CONCLUSION: Hydrogen peroxide does not induce significant changes in tooth enamel organic and inorganic relative contents, and it whitens teeth just by oxidizing their organic matrix. These findings are of great clinical significance since they explain the mechanism of tooth bleaching, and help understanding its limitations and disadvantages.
Asunto(s)
Esmalte Dental/efectos de los fármacos , Peróxido de Hidrógeno/farmacología , Oxidantes/farmacología , Blanqueadores Dentales/farmacología , Adulto , Apatitas/química , Color , Cristalografía , Técnica de Descalcificación , Esmalte Dental/química , Ácido Edético/farmacología , Microanálisis por Sonda Electrónica , Humanos , Microscopía Electrónica de Rastreo , Compuestos Orgánicos/química , Fenómenos Químicos Orgánicos/efectos de los fármacos , Oxidación-Reducción , Proteolisis , Hidróxido de Sodio/farmacología , Espectrofotometría , Espectrometría Raman , Factores de TiempoRESUMEN
The purpose of this study was to analyze and compare scanning electron microscopy (SEM) observations of ball attachments that had been worn by patients during three periods of clinical use. One hundred forty-four specimens of ball anchor attachments (gold alloy matrix and titanium patrix) were studied by SEM after periods of approximately 1, 3.5, and 8 years of clinical use. Twenty new attachment components were examined as controls. SEM images revealed signs of mechanical wear for the ball attachments studied. The surfaces of the titanium patrix were associated primarily with roughening after short-term use, whereas surfaces of the gold alloy matrix showed wear, roughening, and loss of microscopic material in the form of flakes. Severe mechanical wear on both surfaces was noted after longer periods of use. The mechanical changes were not correlated with patient-mediated observations regarding the time-dependent retentive efficacy of the attachments. One year of clinical wear appeared to have limited effect on the ball attachment tested. Conversely, longer periods of use led to marked modifications in shape of the matrix and patrix components.