Induction of Spontaneous Liposome Adsorption by Exogenous Surface Modification with Cell-Penetrating Peptide-Conjugated Lipids.

The use of amphiphilic molecules such as poly(ethylene glycol)-conjugated phospholipid (PEG-lipid) enables incorporation into liposome surfaces by exogenous addition as a result of the self-assembly with lipids. This technique can be applicable for manipulation of both liposomes and cells. In this study, we aimed to characterize Tat peptide (YGRKKRRQRRR)-conjugated PEG-lipids when used to exogenously surface modify liposomes (size: ca. 100 nm). We earlier reported that cells, which were surface modified with Tat peptides conjugated to PEG-lipids could attach spontaneously to material surfaces without any chemical modification. Here, we synthesized different types of Tat-PEG-lipids by combining PEG of different molecular weights (5 and 40 kDa) with different lipids with three acyl chains (myristoyl, palmitoyl, and stearoyl, respectively) and then studied the spontaneous adsorption of modified liposomes onto a substrate surface induced by the different Tat-PEG-lipids. The amount of adsorbed liposomes strongly depended on the number of incorporated Tat-PEG-lipid moieties: a decrease in both the PEG and the acyl chain lengths led to adsorption of higher amounts of liposomes. Furthermore, when a collagenase-cleavable amino acid sequence was inserted between the Tat sequence and the PEG segment, adsorbed liposomes could be harvested from the substrate by collagenase treatment with no difference in desorption efficiency between the different Tat-PEG-lipids. Thus, Tat-PEG-lipid can be a suitable tool for the manipulation of liposomes and cells.

Extracellular Matrix Induces Periodontal Ligament Reconstruction In Vivo.

One of the problems in dental implant treatment is the lack of periodontal ligament (PDL), which supports teeth, prevents infection, and transduces sensations such as chewiness. The objective of the present study was to develop a decellularized PDL for supporting an artificial tooth. To this end, we prepared mouse decellularized mandible bone with a PDL matrix by high hydrostatic pressure and DNase and detergent treatments and evaluated its reconstruction in vivo. After tooth extraction, the decellularized mandible bone with PDL matrix was implanted under the subrenal capsule in rat and observed that host cells migrated into the matrix and oriented along the PDL collagen fibers. The extracted decellularized tooth and de- and re-calcified teeth, which was used as an artificial tooth model, were re-inserted into the decellularized mandible bone and implanted under the subrenal capsule in rat. The reconstructed PDL matrix for the extracted decellularized tooth resembled the decellularized mandible bone without tooth extraction. This demonstrates that decellularized PDL matrix can reconstruct PDL tissue by controlling host cell migration, which could serve as a novel periodontal treatment approach.

Titanium Nanosurface with a Biomimetic Physical Microenvironment to Induce Endogenous Regeneration of the Periodontium.

The periodontium supports the teeth by dentoalveolar fibrous joints that serve unique oral functions. Endogenous regeneration of the periodontium around artificial teeth (dental implants) provides a cost-effective solution for the extension of healthy life expectancy but remains a challenge in regenerative medicine. Biomimetics can create smart biomaterials that tune endogenous cells at a tissue-material interface. Here, we created a smart titanium nanosurface mimicking the surface nanotopography and micromechanical properties of the tooth root cementum (TRC), which is essential for the induction of dentoalveolar fibrous joints to regenerate the periodontium. After transplantation into the rat renal capsule, only the titanium artificial tooth with the TRC-mimetic nanosurface formed a complex dentoalveolar fibrous joint structure, with bone tissue, periodontal ligament (PDL), and TRC, in the decellularized jawbone matrix. TRC-mimetic titanium implants induce the formation of functional periodontium, even in a jawbone implantation model, which generally causes osseointegration (ankyloses). In human PDL cells, TRC analogousness in the surface mechanical microenvironment regulates matrix mineralization through bone sialoprotein expression and phosphorus metabolism, which are critical for cementogenesis. Therefore, the titanium nanosurfaces with nanotopographical and mechanical microenvironments mimicking the TRC surface induce dentoalveolar fibrous joints for periodontal regeneration by interfacial tuning of endogenous cells.

Exogenous Cell Surface Modification with Cell Penetrating Peptide-Conjugated Lipids Causes Spontaneous Cell Adhesion.

The technique of cell patterning on a substrate is of great importance for platforms in cell-based assays. Chemical treatment of the substrate is commonly performed for cell patterning using cationic polymers, extracellular matrices, and antibodies. However, cell patterning could be easier if there is an approach to immobilize cells without treating the substrate surface. We previously reported that cell adhesion could be induced by the modification of the cellular surface with a cell-penetrating peptide (CPP)-conjugated poly(ethylene glycol)-phospholipid (CPP-PEG-lipid). This approach does not require chemical modification of the substrate surface, such as polystyrene or glass, and can be used for the cell patterning of floating cells. Here, we aimed to study the mechanism of induced cell adhesion using a representative CPP, Tat peptide (Tat-PEG-lipid). We found that cell adhesion was induced via electrostatic interactions between the Tat peptide and the substrate surface, which could be induced more efficiently by increasing the molecular weight of PEG together with CPPs but not with cationic peptides. The excluded volume effect between neighboring PEG chains could stretch the cell shape better than PEG with lower molecular weight, allowing the cell to spread firmly. In addition, Tat-PEG-lipid did not activate actin filament formation and did not influence the expression of focal adhesion kinase. Thus, the induced cell adhesion by CPP-PEG-lipid did not affect internal cell signaling.

Preparation of gradient-type biological tissue-polymer complex for interlinking device.

The aim of this study was to investigate the monomer absorption behavior of decellularized dermis and prepare a gradient-type decellularized dermis-polymer complex. Decellularized dermis was prepared using sodium dodecyl sulfate, and its monomer absorption behavior was investigated using three types of hydrophobic monomer with different surface free energies. The results show that monomer absorption depends strongly on the tissue structure, regardless of the surface free energy, and the amount of absorbed monomer can be increased by sonication. Based on these results, we prepared a gradient-type decellularized dermis-poly(methyl methacrylate) complex by controlling the permeation time of the methyl methacrylate monomer and polymerization initiator into the decellularized dermis. The mechanical strength of this complex gradually increased from the dermis side to the polymer side, and combined the physical characteristics of the dermis and the polymer.

Capture and release of cells using a temperature-responsive surface that immobilizes an antibody through DNA duplex formation.

We synthesized a temperature-responsive surface that immobilized an antibody via DNA duplex formation for selective capture and release of target cells. Polyethylene films were modified by grafting poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAAm-co-AAc)), which were prepared at various ratios of NIPAAm/AAc. The increased hydrophilicity of P(NIPAAm-co-PAA) film with decreased temperature was confirmed by water contact angle measurement. Single strand DNA (20mer) was chemically immobilized on the surface and then antibody (anti-mouse CD45, mCD45) modified with the complementary single strand DNA was immobilized on the surface through DNA duplex formation. The mCD45 antibody immobilization was confirmed by immunostaining. HeLa cells (mCD45 negative) and mouse bone marrow (BM) cells (mCD45 positive) were adhered on the surfaces at 37 °C. Although HeLa cells were detached by 4 °C incubation, BM cells were still adhered on the surface and then the adhered cells were released by DNase treatment. From these results, it was suggested that cells could be selectively captured and collected by using a film having surface that immobilizes an antibody via DNA duplex formation.

Decellularized porcine aortic intima-media as a potential cardiovascular biomaterial.

OBJECTIVES: The aim of this research is to investigate the histological and mechanical properties of decellularized aortic intima-media, a promising cardiovascular biomaterial. METHODS: Porcine aortic intima-media was decellularized using two methods: high hydrostatic pressurization (HHP) and sodium dodecyl sulphate (SDS). The histological properties were characterized using haematoxylin and eosin staining and Elastica van Gieson staining. The mechanical properties were evaluated using a tensile strength test. RESULTS: The structure of the HHP-treated samples was unchanged histologically, whereas that of the SDS-treated samples appeared structurally loose. Consequently, with regard to the mechanical properties of SDS-decellularized intima-media, elastic modulus and tensile strength were significantly decreased. CONCLUSIONS: The decellularization method affected the structure and the mechanical properties of the biomaterial. The HHP-treated sample was structurally and mechanically similar to the untreated control. Its mechanical properties were similar to those of human heart valves and the iliac artery and vein. Our results imply that porcine aortic intima-media that is decellularized with HHP is a potential cardiovascular biomaterial.