Local Effects on Airway Inflammation and Systemic Uptake of 5 nm PEGylated and Citrated Gold Nanoparticles in Asthmatic Mice.

Nanotechnology is showing promise in many medical applications such as drug delivery and hyperthermia. Nanoparticles administered to the respiratory tract cause local reactions and cross the blood-air barrier, thereby providing a means for easy systemic administration but also a potential source of toxicity. Little is known about how these effects are influenced by preexisting airway diseases such as asthma. Here, BALB/c mice are treated according to the ovalbumin (OVA) asthma protocol to promote allergic airway inflammation. Dispersions of polyethylene-glycol-coated (PEGylated) and citrate/tannic-acid-coated (citrated) 5 nm gold nanoparticles are applied intranasally to asthma and control groups, and (i) airway resistance and (ii) local tissue effects are measured as primary endpoints. Further, nanoparticle uptake into extrapulmonary organs is quantified by inductively coupled plasma mass spectrometry. The asthmatic precondition increases nanoparticle uptake. Moreover, systemic uptake is higher for PEGylated gold nanoparticles compared to citrated nanoparticles. Nanoparticles inhibit both inflammatory infiltrates and airway hyperreactivity, especially citrated gold nanoparticles. Although the antiinflammatory effects of gold nanoparticles might be of therapeutic benefit, systemic uptake and consequent adverse effects must be considered when designing and testing nanoparticle-based asthma therapies.

Cationizable lipid micelles as vehicles for intraarterial glioma treatment.

The relative abundance of anionic lipids on the surface of endothelia and on glioma cells suggests a workable strategy for selective drug delivery by utilizing cationic nanoparticles. Furthermore, the extracellular pH of gliomas is relatively acidic suggesting that tumor selectivity could be further enhanced if nanoparticles can be designed to cationize in such an environment. With these motivating hypotheses the objective of this study was to determine whether nanoparticulate (20 nm) micelles could be designed to improve their deposition within gliomas in an animal model. To test this, we performed intra-arterial injection of micelles labeled with an optically quantifiable dye. We observed significantly greater deposition (end-tissue concentration) of cationizable micelles as compared to non-ionizable micelles in the ipsilateral hemisphere of normal brains. More importantly, we noted enhanced deposition of cationizable as compared to non-ionizable micelles in glioma tissue as judged by semiquantitative fluorescence analysis. Micelles were generally able to penetrate to the core of the gliomas tested. Thus we conclude that cationizable micelles may be constructed as vehicles for facilitating glioma-selective delivery of compounds after intraarterial injection.

Calreticulin P-domain-derived "Eat-me" peptides for enhancing liposomal uptake in dendritic cells.

Discovering new ligands for enhanced drug uptake and delivery has been the core interest of the drug delivery field. This study capitalizes on the natural "eat-me" signal of calreticulin (CRT), proposing a novel strategy for functionalizing liposomes to improve cellular uptake. CRT is presented on the surfaces of apoptotic cells, and it plays a crucial role in immunogenic cell death (ICD). This is because it is essential for antigen uptake via low-density lipoprotein (LDL) receptor-mediated phagocytosis. Inspired by this mechanism, we interrogated CRT's "eat-me" feature using CRT-derived peptides to functionalize liposomes. We studied liposomal formulation stability, properties, cellular uptake, toxicity, and intracellular trafficking in dendritic cells. We identified key peptide fragments of CRT, specifically from the hydrophilic P-domain, that are compatible with liposomal formulations. Contrary to the more hydrophobic N-domain peptides, the P-domain peptides induced significantly higher liposomal uptake in DC2.4 dendritic cells than cationic DOTAP and anionic DPPG liposomes without inducing toxicity. The P-domain-derived peptides led to enhanced liposomal uptake into DC2.4 dendritic cells compared to the standard DPPC liposomes. The uptake can be partially blocked by the receptor-associated protein (RAP). Upon internalization, P-domain-peptide-decorated liposomes showed higher co-localization with lysosomes compared to the standard DPPC liposomes. Our findings illuminate CRT's operational role and identify P-domain peptides as promising agents for developing biomimetic drug delivery systems that can potentially replicate CRT's "eat-me" function.

Instantly adhesive and ultra-elastic patches for dynamic organ and wound repair.

Bioadhesive materials and patches are promising alternatives to surgical sutures and staples. However, many existing bioadhesives do not meet the functional requirements of current surgical procedures and interventions. Here, we present a translational patch material that exhibits instant adhesion to tissues (2.5-fold stronger than Tisseel, an FDA-approved fibrin glue), ultra-stretchability (stretching to >300% its original length without losing elasticity), compatibility with rapid photo-projection (<2 min fabrication time/patch), and ability to deliver therapeutics. Using our established procedures for the in silico design and optimization of anisotropic-auxetic patches, we created next-generation patches for instant attachment to tissues while conforming to a broad range of organ mechanics ex vivo and in vivo. Patches coated with extracellular vesicles derived from mesenchymal stem cells demonstrate robust wound healing capability in vivo without inducing a foreign body response and without the need for patch removal that can cause pain and bleeding. We further demonstrate a single material-based, void-filling auxetic patch designed for the treatment of lung puncture wounds.

Mechanisms and Barriers in Nanomedicine: Progress in the Field and Future Directions.

In recent years, steady progress has been made in synthesizing and characterizing engineered nanoparticles, resulting in several approved drugs and multiple promising candidates in clinical trials. Regulatory agencies such as the Food and Drug Administration and the European Medicines Agency released important guidance documents facilitating nanoparticle-based drug product development, particularly in the context of liposomes and lipid-based carriers. Even with the progress achieved, it is clear that many barriers must still be overcome to accelerate translation into the clinic. At the recent conference workshop "Mechanisms and Barriers in Nanomedicine" in May 2023 in Colorado, U.S.A., leading experts discussed the formulation, physiological, immunological, regulatory, clinical, and educational barriers. This position paper invites open, unrestricted, nonproprietary discussion among senior faculty, young investigators, and students to trigger ideas and concepts to move the field forward.

Synthesis, characterization, and evaluation of ionizable lysine-based lipids for siRNA delivery.

We report the synthesis and characterization of a series of ionizable lysine-based lipids (ILL), novel lipids containing a lysine headgroup linked to a long-chain dialkylamine through an amide linkage at the lysine α-amine. These ILLs contain two ionizable amines and a carboxylate, and exhibit pH-dependent lipid ionization that varies with lipid structure. The synthetic scheme employed allows for the simple, orthogonal manipulation of lipids. This provides a method for the development of a compositionally diverse library with varying ionizable headgroups, tail structures, and linker regions. A focused library of four ILLs was synthesized to determine the impact of hydrophobic fluidity, lipid net charge, and lipid pK(a) on the biophysical and siRNA transfection characteristics of this new class of lipids. We found that manipulation of lipid structure impacts the protonation behavior, electrostatically driven membrane disruption, and ability to promote siRNA mediated knockdown in vitro. ILL-siRNA liposomal formulations were tested in a murine Factor VII model; however, no significant siRNA-mediated knockdown was observed. These results indicate that ILL may be useful in vitro transfection reagents, but further optimization of this new class of lipids is required to develop an effective in vivo siRNA delivery system.

Non-destructive processing of silver containing glass ceramic antibacterial coating on polymeric surgical mesh surfaces.

Surgical meshes composed of bioinert polymers such as polypropylene are widely used in millions of hernia repair procedures to prevent the recurrence of organ protrusion from the damaged abdominal wall. However, post-operative mesh infection remains a significant complication, elevating hernia recurrence risks from 3.6% to 10%, depending on the procedure type. While attempts have been made to mitigate these infection-related complications by using antibiotic coatings, the rise in antibiotic-resistant bacterial strains threatens their effectiveness. Bioactive glass-ceramics featuring noble metals, notably silver nanoparticles (AgNPs), have recently gained traction for their wide antibacterial properties and biocompatibility. Yet, conventional methods of synthesizing and coating of such materials often require high temperatures, thus making them impractical to be implemented on temperature-sensitive polymeric substrates. To circumvent this challenge, a unique approach has been explored to deposit these functional compounds onto temperature-sensitive polypropylene mesh (PP-M) surfaces. This approach is based on the recent advancements in cold atmospheric plasma (CAP) assisted deposition of SiO2 thin films and laser surface treatment (LST), enabling the selective heating and formation of functional glass-ceramic compounds under atmospheric conditions. A systematic study was conducted to identify optimal LST conditions that resulted in the effective formation of a bioactive glass-ceramic structure without significantly altering the chemical and mechanical properties of the underlying PP-M (less than 1% change compared to the original properties). The developed coating with optimized processing conditions demonstrated high biocompatibility and persistent antibacterial properties (>7 days) against both Gram-positive and Gram-negative bacteria. The developed process is expected to provide a new stepping stone towards depositing a wide range of functional bioceramic coatings onto different implant surfaces, thereby decreasing their risk of infection and associated complications.

Single-tailed heterocyclic carboxamide lipids for macrophage immune-modulation.

The discovery of new immune-modulating biomaterials is of significant value to immuno-engineering and therapy development. Here, we discovered that single-tailed heterocyclic carboxamide lipids preferentially modulated macrophages - but not dendritic cells - by interfering with sphingosine-1-phosphate-related pathways, consequently increasing interferon alpha expression. We further performed extensive downstream correlation analysis and determined key factors in physicochemical properties likely to modulate pro-inflammatory and anti-inflammatory immune responses. These properties will be useful for the rational design of the next generation of cell type-specific immune-modulating lipids.

Controlled nucleation of lipid nanoparticles.

PURPOSE: We describe a nucleation-based method which allows for the generation of monodisperse lipid nanoparticles over a range of diameters. Using a set of novel zwitterionic lipids and inverse phosphocholine lipids with pKas ranging from 2 to 5, we showed how the hydrodynamic diameter of lipid nanoparticles can be systematically manipulated over a 60 nm to 500 nm size range. METHOD: Lipid nanoparticles were prepared by adding an anti-solvent, such as water, to the organic phase containing the lipid components. This led to super-saturation and the spontaneous formation of particles. RESULTS: The growth and final particle size was controlled by the ratio of the components in the ternary system: lipid, organic solvent and aqueous phase. Particles with diameter below 125 nm were formed under conditions where the super-saturation coefficient was between 2.3 and 20. PEG-lipid served as an efficient growth inhibitor except at very high and low lipid concentrations. Encapsulation efficiency of siRNA into lipid nanoparticles was shown to be pH-dependent and requires the protonation of the anionic carboxylate groups of the zwitterionic lipids, emphasizing the importance of electrostatic forces. CONCLUSION: This process enables high encapsulation efficiency of nucleic acids and allows the size of lipid nanoparticles to be controlled.

Phosphatase-triggered fusogenic liposomes for cytoplasmic delivery of cell-impermeable compounds.

License to fuse! A phosphorylated fusion peptide can mediate membrane fusion when the phosphates (green triangles, see scheme) are removed by phosphatases (blue spheres), delivering the contents of the liposome into the cytosol. This phosphatase-triggered approach may be useful to create target-specific lipid nanocarriers.

Nanocarrier-hydrogel composite delivery systems for precision drug release.

Hydrogels are a class of biomaterials widely implemented in medical applications due to their biocompatibility and biodegradability. Despite the many successes of hydrogel-based delivery systems, there remain challenges to hydrogel drug delivery such as a burst release at the time of administration, a limited ability to encapsulate certain types of drugs (i.e., hydrophobic drugs, proteins, antibodies, and nucleic acids), and poor tunability of geometry and shape for controlled drug release. This review discusses two main important advances in hydrogel fabrication for precision drug release: first, the incorporation of nanocarriers to diversify their drug loading capability, and second, the design of hydrogels using 3D printing to precisely control drug dosing and release kinetics via high-resolution structures and geometries. We also outline ongoing challenges and discuss opportunities to further optimize drug release from hydrogels for personalized medicine. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Amine-modified poly(vinyl alcohol)s as non-viral vectors for siRNA delivery: effects of the degree of amine substitution on physicochemical properties and knockdown efficiency.

PURPOSE: The objective of this study was to investigate how the degree of amine substitution of amine-modified poly(vinyl alcohol) (PVA) affects complexation of siRNA, protection of siRNA against degrading enzymes, intracellular uptake and gene silencing. METHODS: A series of DEAPA-PVA polymers with increasing amine density was synthesized by modifying the hydroxyl groups in the PVA backbone with diethylamino propylamine groups using CDI chemistry. These polymers were characterized with regard to their ability to complex and protect siRNA against RNase. Finally, their potential to mediate intracellular uptake and gene silencing in SKOV-luc cells was investigated. RESULTS: A good correlation between amine density and siRNA complexation as well as protection of siRNA against RNase was found. Consisting solely of tertiary amines, this class of polymer was able to mediate efficient gene silencing when approximately 30% of the hydroxyl groups in the PVA backbone were modified with diethylamino propylamine groups. Polymers with a lower amine density (up to 23%) were inefficient in gene silencing, while increasing the amine density to 48% led to non-specific knockdown effects. CONCLUSION: DEAPA-PVA polymers were shown to mediate efficient gene silencing and offer a promising platform for further structural modifications.

Effects of cell-penetrating peptides and pegylation on transfection efficiency of polyethylenimine in mouse lungs.

BACKGROUND: Cell-penetrating peptides (CPPs) could potentially be used as vectors for intracellular delivery of proteins, peptides and nucleic acids. The present study examined different CPPs, such as TAT-derived and arginine rich sequences, as well as model amphiphilic peptide, with respect to transfection efficiency of pegylated polyethylenimine (PEI) in A549, Calu-3 cells and in mice after intra-tracheal administration. METHODS: The conjugates were prepared by the coupling of CPPs to PEI via a heterobifunctional polyethylene glycol (PEG) linker, resulting in the bioconjugates CPP-PEG-PEI. Structures were successfully confirmed by (1)H-nuclear magnetic resonance and diffusion-ordered spectroscopy. Unmodified PEI 25 kDa was compared with pegylated PEI, and aggregation tendency in cell culture medium, interaction with mucin and stability against heparin was assayed. After evaluating transfection efficiency of the polymers in two different lung cell lines, luciferase reporter gene expression was determined in mouse lungs. RESULTS: All conjugates showed superior transfection efficiency compared to unmodified PEI 25 kDa. The conjugates sizes were generally < 300 nm, thus enabling them to penetrate through the mucus lining of the lung and reach the target cells. Coupling of CPPs to PEG-PEI, however, did not significantly improve transfection efficiency in A549 cells, calu-3 cells and in mouse lungs. CONCLUSIONS: We show that small and stable polyplex size achieved by pegylation is favourable for successful pulmonary gene delivery. Compared to PEI 25 kDa, pegylated PEI and CPP-PEG-PEI displayed enhanced transfection efficiency both in vitro and in vivo.

Biodegradable polymeric nanocarriers for pulmonary drug delivery.

BACKGROUND: Pulmonary drug delivery is attractive for both local and systemic drug delivery as a non-invasive route that provides a large surface area, thin epithelial barrier, high blood flow and the avoidance of first-pass metabolism. OBJECTIVE: Nanoparticles can be designed to have several advantages for controlled and targeted drug delivery, including controlled deposition, sustained release, reduced dosing frequency, as well as an appropriate size for avoiding alveolar macrophage clearance or promoting transepithelial transport. METHODS: This review focuses on the development and application of biodegradable polymers to nanocarrier-based strategies for the delivery of drugs, peptides, proteins, genes, siRNA and vaccines by the pulmonary route. RESULTS/CONCLUSION: The selection of natural or synthetic materials is important in designing particles or nanoparticle clusters with the desired characteristics, such as biocompatibility, size, charge, drug release and polymer degradation rate.

Effect of CCR2 inhibitor-loaded lipid micelles on inflammatory cell migration and cardiac function after myocardial infarction.

BACKGROUND: After myocardial infarction (MI), inflammatory cells infiltrate the infarcted heart in response to secreted stimuli. Monocytes are recruited to the infarct via CCR2 chemokine receptors along a CCL2 concentration gradient. While infiltration of injured tissue with monocytes is an important component of the reparatory response, excessive or prolonged inflammation can adversely affect left ventricular remodeling and worsen clinical outcomes. MATERIALS AND METHODS: Here, we developed poly(ethylene glycol) (PEG)-distearoylphos-phatidylethanolamine (PEG-DSPE) micelles loaded with a small molecule CCR2 antagonist to inhibit monocyte recruitment to the infarcted myocardium. To specifically target CCR2-expressing cells, PEG-DSPE micelles were further surface decorated with an anti-CCR2 antibody. RESULTS: Targeted PEG-DSPE micelles showed eight-fold greater binding to CCR2-expressing RAW 264.7 monocytes than plain, non-targeted PEG-DSPE micelles. In a mouse model of MI, CCR2-targeting PEG-DSPE micelles loaded with a CCR2 small molecule antagonist significantly decreased the number of Ly6Chigh inflammatory cells to 3% of total compared with PBS-treated controls. Furthermore, CCR2-targeting PEG-DSPE micelles significantly reduced the infarct size based on epicardial and endocardial infarct arc lengths. CONCLUSION: Both non-targeted and CCR2-targeting PEG-DSPE micelles showed a trend toward improving cardiac function. As such, PEG-DSPE micelles represent a promising cardiac therapeutic platform.

Influence of amine-modified poly(vinyl alcohol)s on vibrating-membrane nebulizer performance and lung toxicity.

A suitable aerosol droplet size and formulation output rate is essential for the therapy of lung diseases under application of nebulizers. The current study investigated the potential of amine-modified poly(vinyl alcohol)s as excipients for inhalation delivery. A change of conductivity (effective at <0.1mg/ml) and viscosity (effective at >0.1mg/ml) of samples that were supplemented with charge-modified polymers had a significant influence on the generated droplet size (shift from ~8 to ~4 µm) and formulation throughput rate (shift from ~0.2 to ~1.0 g/min), where polymers with a higher amine density (and molecular weight) showed an elevated activity. Biocompatibility assessment of polymers in A549 cells and an isolated lung model resulted in cell lysis and lung edema formation dependent on the type (degree of amine substitution) and dose of polymer applied. Suitable compositions and concentrations of amine-modified poly(vinyl alcohol)s were identified with respect to an optimized nebulizer performance and acceptable biocompatibility. Charge-modified polymers represent novel excipients with potential to improve inhalation therapy.

Synthesis and characterization of novel zwitterionic lipids with pH-responsive biophysical properties.

We report the synthesis and biophysical characterization of a novel class of zwitterionic lipids (ZL) with head groups containing a 3° or 4° amine and carboxylate. ZL form stable liposomes that exhibit head group dependent, pH-responsive biophysical characteristics. These lipids may be suitable components for drug delivery applications due to their ease of synthesis and unique pH-dependent properties.

Biophysical and biological investigation of DNA nano-complexes with a non-toxic, biodegradable amine-modified hyperbranched polyester.

Designed for gene therapy of chronic diseases, HBP-DEAPA 60 is a non-toxic biodegradable amine modified hyperbranched polyester. This candidate was chosen from a series of hyperbranched polymers for further characterization as it showed the best transfection efficiency and fastest degradation rate. HBP-DEAPA 60/DNA complexes were investigated with regard to stability, uptake and formation to gain a better insight into HBP-DEAPA 60/DNA complex properties. We investigated HBP-DEAPA 60/DNA complex uptake into A 549 cells by FACS and CLSM. Their stability was investigated by a heparin displacement assay as well as by DNAse I assay. Morphology was shown by AFM. HBP-DEAPA 60/DNA complex formation was further characterized in terms of thermodynamic parameters. We studied the conformation of DNA in nano-complexes via circular dichroism (CD) spectroscopy for different NP ratios. Thermodynamic studies showed that binding enthalpies were endothermic; the nano-complex formation was entropically driven. Although PEI/DNA and HBP-DEAPA 60/DNA complexes showed similar behavior with regard to uptake, heparin stability, DNA helicality and their entropically driven complex formation they differ in their binding constant K(a) and in their ability to protect the DNA from DNAse. Concerning K(a) and DNAse stability, HBP-DEAPA/DNA complexes should be further optimized. This shows that different characterization studies are necessary to fully characterize polyplex stability and properties.

Novel 'nano in nano' composites for sustained drug delivery: biodegradable nanoparticles encapsulated into nanofiber non-wovens.

Novel 'nano in nano' composites consisting of biodegradable polymer nanoparticles incorporated into polymer nanofibers may efficiently modulate drug delivery. This is shown here using a combination of model compound-loaded biodegradable nanoparticles encapsulated in electrospun fibers. The dye coumarin 6 is used as model compound for a drug in order to simulate drug release from loaded poly(lactide-co-glycolide) nanoparticles. Dye release from the nanoparticles occurs immediately in aqueous solution. Dye-loaded nanoparticles which are encapsulated by electrospun polymer nanofibers display a significantly retarded release.