Wide bandgap semiconductor nanomembranes as a long-term biointerface for flexible, implanted neuromodulator.

Electrical neuron stimulation holds promise for treating chronic neurological disorders, including spinal cord injury, epilepsy, and Parkinson's disease. The implementation of ultrathin, flexible electrodes that can offer noninvasive attachment to soft neural tissues is a breakthrough for timely, continuous, programable, and spatial stimulations. With strict flexibility requirements in neural implanted stimulations, the use of conventional thick and bulky packages is no longer applicable, posing major technical issues such as short device lifetime and long-term stability. We introduce herein a concept of long-lived flexible neural electrodes using silicon carbide (SiC) nanomembranes as a faradic interface and thermal oxide thin films as an electrical barrier layer. The SiC nanomembranes were developed using a chemical vapor deposition (CVD) process at the wafer level, and thermal oxide was grown using a high-quality wet oxidation technique. The proposed material developments are highly scalable and compatible with MEMS technologies, facilitating the mass production of long-lived implanted bioelectrodes. Our experimental results showed excellent stability of the SiC/silicon dioxide (SiO2) bioelectronic system that can potentially last for several decades with well-maintained electronic properties in biofluid environments. We demonstrated the capability of the proposed material system for peripheral nerve stimulation in an animal model, showing muscle contraction responses comparable to those of a standard non-implanted nerve stimulation device. The design concept, scalable fabrication approach, and multimodal functionalities of SiC/SiO2 flexible electronics offer an exciting possibility for fundamental neuroscience studies, as well as for neural stimulation-based therapies.

Emerging Enterovirus A71 Subgenogroup B5 Causing Severe Hand, Foot, and Mouth Disease, Vietnam, 2023.

We report on a 2023 outbreak of severe hand, foot, and mouth disease in southern Vietnam caused by an emerging lineage of enterovirus A71 subgenogroup B5. Affected children were significantly older than those reported during previous outbreaks. The virus should be closely monitored to assess its potential for global dispersal.

Implication of transcription factor FOXD2 dysfunction in syndromic congenital anomalies of the kidney and urinary tract (CAKUT).

Congenital anomalies of the kidney and urinary tract (CAKUT) are the predominant cause for chronic kidney disease below age 30 years. Many monogenic forms have been discovered due to comprehensive genetic testing like exome sequencing. However, disease-causing variants in known disease-associated genes only explain a proportion of cases. Here, we aim to unravel underlying molecular mechanisms of syndromic CAKUT in three unrelated multiplex families with presumed autosomal recessive inheritance. Exome sequencing in the index individuals revealed three different rare homozygous variants in FOXD2, encoding a transcription factor not previously implicated in CAKUT in humans: a frameshift in the Arabic and a missense variant each in the Turkish and the Israeli family with segregation patterns consistent with autosomal recessive inheritance. CRISPR/Cas9-derived Foxd2 knockout mice presented with a bilateral dilated kidney pelvis accompanied by atrophy of the kidney papilla and mandibular, ophthalmologic, and behavioral anomalies, recapitulating the human phenotype. In a complementary approach to study pathomechanisms of FOXD2-dysfunction-mediated developmental kidney defects, we generated CRISPR/Cas9-mediated knockout of Foxd2 in ureteric bud-induced mouse metanephric mesenchyme cells. Transcriptomic analyses revealed enrichment of numerous differentially expressed genes important for kidney/urogenital development, including Pax2 and Wnt4 as well as gene expression changes indicating a shift toward a stromal cell identity. Histology of Foxd2 knockout mouse kidneys confirmed increased fibrosis. Further, genome-wide association studies suggest that FOXD2 could play a role for maintenance of podocyte integrity during adulthood. Thus, our studies help in genetic diagnostics of monogenic CAKUT and in understanding of monogenic and multifactorial kidney diseases.

Novel melanin-derived stationary phase for immobilized metal ion affinity chromatography in recombinant His-tagged protein purification.

The matrix of the stationary phase is a crucial element in affinity chromatography for protein purification. Various materials, including polymer or magnetic materials, have been employed as the matrix in the purification of His-tagged protein. Here, for the first time, we utilized a combination of melanin and alginate, both natural polymer materials, to synthesize Ni-melanin/alginate (Ni-M/A) beads for His-tagged protein purification. We investigated the binding of His-tagged Mpro on the Ni-M/A beads, referred to as Ni-M/A-Mpro, and assessed the elution efficiency of Mpro from the beads. Our examination involved FTIR, EDS, XRD, SDS-PAGE, and Western blotting methods. FTIR spectra revealed notable changes in the stretching patterns and intensities of hydroxyl, amine, carbonyl, imine and amide chemical groups, when Mpro protein was present in the Ni-M/A sample. XRD spectra demonstrated the occurrence of two Nickel peaks at 35-40 deg and 40-45 deg in Ni-M/A, but only one nickel peak at 35-40 deg in Ni-M/A-Mpro, indicating the binding of Mpro on the Nickel ions. EDS analysis reported a decrease in the concentration of Nickel on the surface of Ni-M/A from 16% to 7% when Mpro protein was loaded into the stationary phase. Importantly, our data indicated that the purity of the His-tagged protein Mpro after purification reached 97% after just one-step purification using the Ni-M/A stationary phase. Moreover, the binding capacity of Ni-M/A for Mpro was approximately 5.2 mg/g with recovery efficiency of 40%. Our results suggested Ni-M/A as a highly potential solid phase for affinity chromatography in the purification of His-tagged protein.

Feasibility of wearable monitors to detect heart rate variability in children with hand, foot and mouth disease.

Hand foot and mouth disease (HFMD) is caused by a variety of enteroviruses, and occurs in large outbreaks in which a small proportion of children deteriorate rapidly with cardiopulmonary failure. Determining which children are likely to deteriorate is difficult and health systems may become overloaded during outbreaks as many children require hospitalization for monitoring. Heart rate variability (HRV) may help distinguish those with more severe diseases but requires simple scalable methods to collect ECG data.We carried out a prospective observational study to examine the feasibility of using wearable devices to measure HRV in 142 children admitted with HFMD at a children's hospital in Vietnam. ECG data were collected in all children. HRV indices calculated were lower in those with enterovirus A71 associated HFMD compared to those with other viral pathogens.HRV analysis collected from wearable devices is feasible in a low and middle income country (LMIC) and may help classify disease severity in HFMD.

Retinestatin, a Polyol Polyketide from a Termite Nest-Derived Streptomyces sp.

A new polyol polyketide, named retinestatin (1), was obtained and characterized from the culture of a Streptomyces strain, which was isolated from a subterranean nest of the termite Reticulitermes speratus kyushuensis Morimoto. The planar structure of 1 was elucidated on the basis of the cumulative analysis of ultraviolet, infrared, mass spectrometry, and nuclear magnetic resonance spectroscopic data. The absolute configuration of 1 at 12 chiral centers was successfully assigned by employing a J-based configuration analysis in combination with ROESY correlations, a quantum mechanics-based computational approach to calculate NMR chemical shifts, and a 3 min flash esterification by Mosher's reagents followed by NMR analysis. Biological evaluation of retinestatin (1) using an in vitro model of Parkinson's disease revealed that 1 protected SH-SY5Y dopaminergic cells from MPP+-induced cytotoxicity, indicating its neuroprotective effects.

Volumetric evaluation of osteotomy gap following mandibular bilateral sagittal split osteotomy using a novel semi-automated approach: a pilot study.

OBJECTIVES: To establish an analysis pipeline for the volumetric evaluation of the osteotomy site after bilateral sagittal split osteotomy (BSSO). PATIENTS AND METHODS: Cone-beam computed tomography (CBCT) was performed before, directly after BSSO, and 6-12 months after surgery. Image segmentations of each osteotomy gap data set were performed manually by four physicians and were compared to a semi-automatic segmentation approach. RESULTS: Five patients with a total of ten osteotomy gaps were included. The mean interclass correlation coefficient (ICC) of individual patients was 0.782 and the standard deviation 0.080 when using the manual segmentation approach. However, the mean ICC of the evaluation of anatomical sites and time points separately was 0.214, suggesting a large range of deviation within the manual segmentation of each rater. The standard deviation was 0.355, further highlighting the extent of the variation. In contrast, the semi-automatic approach had a mean ICC of 0.491 and a standard deviation of 0.365, which suggests a relatively higher agreement among the operators compared to the manual segmentation approach. Furthermore, the volume of the osteotomy gap in the semi-automatic approach showed the same tendency in every site as the manual segmentation approach, but with less deviation. CONCLUSION: The semi-automatic approach developed in the present study proved to be valid as a standardised method with high repeatability. Such image analysis methods could help to quantify the progression of bone healing after BSSO and beyond, eventually facilitating the earlier identification of patients with retarded healing.

Design, synthesis and evaluation the bioactivities of novel 1,3-dimethyl-6-amino-1H-indazole derivatives as anticancer agents.

Indoleamine 2,3-dioxygenase (IDO1) is a heme-containing enzyme mainly responsible for the metabolism of tryptophan to kynurenine. To date, the IDO1 inhibitors have been developed intensively for the re-activation of the anticancer immune response. In this report, we designed, and synthesized novel 1,3-dimethyl-6-amino indazole derivatives as IDO1 inhibitors based on the structure of IDO1 active site. We further examined their anticancer activity on hypopharyngeal carcinoma cells (FaDu), squamous cell carcinoma of the oral tongue (YD-15), breast cancer cells (MCF7), and human dental pulp stem cells (HDPSC). Of them, compound N-(4-bromobenzyl)-1,3-dimethyl-1H-indazol-6-amine (7) remarkably suppressed IDO1 expression in a concentration - dependent manner. In addition, 7 was the most potential anticancer compound with inducing apoptosis activity as well as selectively activated extracellular signal-regulated kinases (ERK) in mitogen-activated protein kinase (MAPK) pathways on FaDu cells. Finally, compound 7 suppressed cell mobility in wound healing assay with the reduced expression of matrix metalloproteinase MMP9. Taken together, we believe that 7 is the most promising compound, which may be applied to treatment of hypopharyngeal carcinoma.

Influence of Block Ratio on Thermal, Optical, and Photovoltaic Properties of Poly(3-hexylthiophene)-b-poly(3-butylthiophene)-b-poly(3-octylthiophene).

Efforts to improve the solar power conversion efficiencies of binary bulk heterojunction-type organic photovoltaic devices using an active layer consisting of a poly-(3-alkylthiophene) (P3AT) homopolymer and a suitable fullerene derivative face barriers caused by the intrinsic properties of homopolymers. To overcome such barriers, researchers might be able to chemically tailor homopolymers by means of monomer ratio-balanced block copolymerization to obtain preferable properties. Triblock copolymers consisting of three components-3-hexylthiophene (HT), 3-butylthiophene (BT), and 3-octylthiophene (OT)-were synthesized via Grignard metathesis (GRIM) polymerization. The component ratios of the synthesized block copolymers were virtually the same as the feeding ratios of the monomers, a fact which was verified using 1H-NMR spectra. All the copolymers exhibited comparable crystalline and melting temperatures, which increased when one type of monomer became dominant. In addition, their power conversion efficiencies and photoluminescence properties were governed by the major components of the copolymers. Interestingly, the HT component-dominated block copolymer indicated the highest power conversion efficiency, comparable to that of its homopolymer, although its molecular weight was significantly shorter.

Biodegradable Piezoelectric Force Sensor.

Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensor which only relies on safe medical materials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here, we present a strategy for material processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-l-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices.

Neutralizing Antibodies against Enteroviruses in Patients with Hand, Foot and Mouth Disease.

Hand, foot and mouth disease (HFMD) is an emerging infection with pandemic potential. Knowledge of neutralizing antibody responses among its pathogens is essential to inform vaccine development and epidemiologic research. We used 120 paired-plasma samples collected at enrollment and >7 days after the onset of illness from HFMD patients infected with enterovirus A71 (EV-A71), coxsackievirus A (CVA) 6, CVA10, and CVA16 to study cross neutralization. For homotypic viruses, seropositivity increased from <60% at enrollment to 97%-100% at follow-up, corresponding to seroconversion rates of 57%-93%. Seroconversion for heterotypic viruses was recorded in only 3%-23% of patients. All plasma samples from patients infected with EV-A71 subgenogroup B5 could neutralize the emerging EV-A71 subgenogroup C4. Collectively, our results support previous reports about the potential benefit of EV-A71 vaccine but highlight the necessity of multivalent vaccines to control HFMD.

Iridescent Cellulose Nanocrystal Films Modified with Hydroxypropyl Cellulose.

The introduction of polymers into a chiral nematic cellulose nanocrystal (CNC) matrix allows for the tuning of optical and mechanical properties, enabling the development of responsive photonic materials. In this study, we explored the incorporation of hydroxypropyl cellulose (HPC) into a CNC film prepared by slow evaporation. In the composite CNC/HPC thin films, the CNCs adopt a chiral nematic structure, which can selectively reflect certain wavelengths of light to yield a colored film. The color could be tuned across the visible spectrum by changing the concentration or molecular weight of the HPC. Importantly, the composite films were more flexible than pure CNC films with up to a ten-fold increase in elasticity and a decrease in stiffness and tensile strength of up to six times and four times, respectively. Surface modification of the films with methacrylate groups increased the hydrophobicity of the films, and therefore, the water stability of these materials was also improved.

Genetic characterization of VP1 of coxsackieviruses A2, A4, and A10 associated with hand, foot, and mouth disease in Vietnam in 2012-2017: endemic circulation and emergence of new HFMD-causing lineages.

While conducting sentinel surveillance of hand, foot, and mouth disease (HFMD) in Vietnam, we found a sudden increase in the prevalence of coxsackievirus A10 (CV-A10) in 2016 and CV-A2 and CV-A4 in 2017, the emergence of which has been reported recently to be associated with various clinical manifestations in other countries. However, there have been only a limited number of molecular studies on those serotypes, with none being conducted in Vietnam. Therefore, we sequenced the entire VP1 genes of CV-A10, CV-A4, and CV-A2 strains associated with HFMD in Vietnam between 2012 and 2017. Phylogenetic analysis revealed a trend of endemic circulation of Vietnamese CV-A10, CV-A4, and CV-A2 strains and the emergence of thus-far undescribed HFMD-causing lineages of CV-A4 and CV-A2. The Vietnamese CV-A10 strains belonged to a genotype comprising isolates from patients with HFMD from several other countries; however, most of the Vietnamese strains were grouped into a local lineage. Recently, emerging CV-A4 strains in Vietnam were grouped into a unique lineage within a genotype comprising strains isolated from patients with acute flaccid paralysis from various countries. New substitutions were detected in the putative BC and HI loops in the Vietnamese CV-A4 strains. Except for one strain, Vietnamese CV-A2 isolates were grouped into a unique lineage of a genotype that includes strains from various countries that are associated with other clinical manifestations. Enhanced surveillance is required to monitor their spread and to specify their roles as etiological agents of HFMD or "HFMD-like" diseases, especially for CV-A4 and CV-A2. Further studies including whole-genome sequencing should be conducted to fully understand the evolutionary changes occurring in these newly emerging strains.

Effect of Spacer Configuration on the Characteristics of FO Membranes: Alteration of Permeation Characteristics by Membrane Deformation and Concentration Polarization.

Membrane deformation is a significant problem in osmotically driven membrane processes, as it restricts practical operating conditions and reduces overall process performance due to unfavorable alteration of membrane permeation characteristics. In this respect, a spacer plays a crucial role, as it dictates the form and extent of membrane deformation in association with concentration polarization (CP), which is also influenced by spacer-induced hydrodynamic behavior near the membrane surface. These two roles of spacers on membrane permeation characteristics are inherently inseparable with the coexistence of hydraulic and osmotic pressures. Here, we suggest a novel analytical method to differentially quantify the proportions of effective osmotic pressure drop caused by membrane deformation and CP. Furthermore, we tested two different FO membranes with three different spacer configurations to define and discuss different forms of membrane deformation and their effects on membrane permeation characteristics. The differential analysis revealed the effect of spacer configuration on effective osmotic pressure drop in membrane deformation (up to ∼201% of variation) is much greater than that in CP (up to ∼20.1% of variation). In addition, a combined configuration of a feed spacer and tricot spacer demonstrated its ability of mitigating membrane deformation with lower selectivity loss and channel pressure drop under pressurization.

Overcoming factors limiting high-solids fermentation of lignocellulosic biomass to ethanol.

Simultaneous saccharification and fermentation (SSF) of solid biomass can reduce the complexity and improve the economics of lignocellulosic ethanol production by consolidating process steps and reducing end-product inhibition of enzymes compared with separate hydrolysis and fermentation (SHF). However, a long-standing limitation of SSF has been too low ethanol yields at the high-solids loading of biomass needed during fermentation to realize sufficiently high ethanol titers favorable for more economical ethanol recovery. Here, we illustrate how competing factors that limit ethanol yields during high-solids fermentations are overcome by integrating newly developed cosolvent-enhanced lignocellulosic fractionation (CELF) pretreatment with SSF. First, fed-batch glucose fermentations by Saccharomyces cerevisiae D5A revealed that this strain, which has been favored for SSF, can produce ethanol at titers of up to 86 g⋅L-1 Then, optimizing SSF of CELF-pretreated corn stover achieved unprecedented ethanol titers of 79.2, 81.3, and 85.6 g⋅L-1 in batch shake flask, corresponding to ethanol yields of 90.5%, 86.1%, and 80.8% at solids loadings of 20.0 wt %, 21.5 wt %, and 23.0 wt %, respectively. Ethanol yields remained at over 90% despite reducing enzyme loading to only 10 mg protein⋅g glucan-1 [∼6.5 filter paper units (FPU)], revealing that the enduring factors limiting further ethanol production were reduced cell viability and glucose uptake by D5A and not loss of enzyme activity or mixing issues, thereby demonstrating an SSF-based process that was limited by a strain's metabolic capabilities and tolerance to ethanol.

Enterovirus A71 Phenotypes Causing Hand, Foot and Mouth Disease, Vietnam.

We investigated enterovirus A71-associated hand, foot and mouth disease in Vietnam and found that, after replacing subgenogroup C4 in 2013, B5 remained the leading cause of this disease. In contrast with previous observations, this switch did not result in an explosive outbreak, and B5 evolution was driven by negative selection.

Assessing the efficacy and safety of magnesium sulfate for management of autonomic nervous system dysregulation in Vietnamese children with severe hand foot and mouth disease.

BACKGROUND: Brainstem encephalitis is a serious complication of hand foot and mouth disease (HFMD) in children. Autonomic nervous system (ANS) dysregulation and hypertension may occur, sometimes progressing to cardiopulmonary failure and death. Vietnamese national guidelines recommend use of milrinone if ANS dysregulation with Stage 2 hypertension develops. We wished to investigate whether magnesium sulfate (MgSO4) improved outcomes in children with HFMD if used earlier in the evolution of the ANS dysregulation (Stage 1 hypertension). METHODS: During a regional epidemic we conducted a randomized, double-blind, placebo-controlled trial of MgSO4 in children with HFMD, ANS dysregulation and Stage 1 hypertension, at the Hospital for Tropical Diseases in Ho Chi Minh city. Study participants received an infusion of MgSO4 or matched placebo for 72 h. We also reviewed data from non-trial HFMD patients in whom milrinone failed to control hypertension, some of whom received MgSO4 as second line therapy. The primary outcome for both analyses was a composite of disease progression within 72 h - addition of milrinone (trial participants only), need for ventilation, shock, or death. RESULTS: Between June 2014 and September 2016, 14 and 12 participants received MgSO4 or placebo respectively, before the trial was stopped due to futility. Among 45 non-trial cases with poorly controlled hypertension despite high-dose milrinone, 33 received MgSO4 while 12 did not. There were no statistically significant differences in the composite outcome between the MgSO4 and the placebo/control groups in either study (adjusted relative risk (95%CI) of [6/14 (43%) vs. 6/12 (50%)], 0.84 (0.37, 1.92), p = 0.682 in the trial and [1/33 (3%) vs. 2/12 (17%)], 0.16 (0.01, 1.79), p = 0.132 in the observational cohort). The incidence of adverse events was similar between the groups. Potentially toxic magnesium levels occurred very rarely with the infusion regime used. CONCLUSION: Although we could not demonstrate efficacy in these studies, there were no safety signals associated with use of 30-50 mg/kg/hr. MgSO4 in severe HFMD. Intermittent outbreaks of HFMD are likely to continue across the region, and an adequately powered trial is still needed to evaluate use of MgSO4 in controlling hypertension in severe HFMD, potentially involving a higher dose regimen. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT01940250 (Registered 22 AUG 2013). Trial sponsor: University of Oxford.

Emission of Unintentionally Produced Persistent Organic Pollutants from Some Industrial Processes in Northern Vietnam.

Concentrations of PCDD/Fs, dioxin-like PCBs (dl-PCBs), PeCB and HCB were determined in flue gas, fly ash and bottom ash samples collected from brick production, steel production, and zinc production plants, an industrial waste incinerator and a medical waste incinerator in northern Vietnam to understand the contamination levels, accumulation patterns and extent of emission. Total TEQs concentrations of PCDD/Fs and dl-PCBs in flue gas and ash samples from these industrial plants ranged from 0.304 to 50.55 pg/Nm3 and 1.43 to 440 pg/g, respectively. PeCB and HCB residues in flue gas samples ranged from 0.839 to 46.59 ng/Nm3 and 1.16 to 60.5 ng/Nm3, respectively. The emission factors of 4.8-740 ngTEQs/tonne for PCDD/Fs and dl-PCBs, 67.12-240.7 µg/ton for PeCB and 11.64-889.3 µg/ton for HCB were obtained in flue gas samples. This is among the first reports on the emission factor of PCDD/Fs, dl-PCBs, PeCB, HCB in brick production, zinc production and waste incineration in Vietnam.

Emerging Coxsackievirus A6 Causing Hand, Foot and Mouth Disease, Vietnam.

Hand, foot and mouth disease (HFMD) is a major public health issue in Asia and has global pandemic potential. Coxsackievirus A6 (CV-A6) was detected in 514/2,230 (23%) of HFMD patients admitted to 3 major hospitals in southern Vietnam during 2011-2015. Of these patients, 93 (18%) had severe HFMD. Phylogenetic analysis of 98 genome sequences revealed they belonged to cluster A and had been circulating in Vietnam for 2 years before emergence. CV-A6 movement among localities within Vietnam occurred frequently, whereas viral movement across international borders appeared rare. Skyline plots identified fluctuations in the relative genetic diversity of CV-A6 corresponding to large CV-A6-associated HFMD outbreaks worldwide. These data show that CV-A6 is an emerging pathogen and emphasize the necessity of active surveillance and understanding the mechanisms that shape the pathogen evolution and emergence, which is essential for development and implementation of intervention strategies.

Polylactic Acid/Chitosan Nanoparticles Loading Nifedipine: Characterization Findings and In Vivo Investigation in Animal.

This paper presents the results of zeta potential, water contact angle, atomic force microscopy image, in vitro solubility, and content of heavy metals in polylactic acid (PLA)/chitosan (CS) nanoparticles loading nifedipine. In addition, the In Vivo test of the PLA/CS nanoparticles loading nifedipine in the mice is also one of highlights of this work. The Zeta potential result shows that the charged surface of the PLA/CS nanoparticles loading nifedipine is neutral, negative or complex depending on nifedipine content. Nifedipine plays a role in increase of hydrophobic property, swelling degree and regular surface as well as decrease of surface rough of the nanoparticles. The PLA/CS/nifedipine nanoparticles are dissolved in the solutions with pH 6.8, pH 4.5 and pH 1.2. The In Vivo test of PLA/CS nanoparticles loading nifedipine on mice was evaluated by the change in diastolic pressure, systolic pressure, arterial pressure and heart rate. The obtained results confirm that the PLA/CS nanoparticles loading nifedipine is suitable to apply in the treatment of hypertension patients lately.