Fibrocyte: A missing piece in the pathogenesis of fibrous epulis.

OBJECTIVES: To explore the role of fibrocytes in the recurrence and calcification of fibrous epulides. METHODS: Different subtypes of fibrous epulides and normal gingival tissue specimens were first collected for histological and immunofluorescence analyses to see if fibrocytes were present and whether they differentiated into myofibroblasts and osteoblasts upon stimulated by transforming growth factor-ß1 (TGF-ß1). Electron microscopy and elemental analysis were used to characterize the extracellular microenvironment in different subtypes of fibrous epulides. Human peripheral blood mononuclear cells (PBMCs) were subsequently isolated from in vitro models to mimic the microenvironment in fibrous epulides to identify whether TGF-ß1 as well as the calcium and phosphorus ion concentration in the extracellular matrix (ECM) of a fibrous epulis trigger fibrocyte differentiation. RESULTS: Fibrous epulides contain fibrocytes that accumulate in the local inflammatory environment and have the ability to differentiate into myofibroblasts or osteoblasts. TGF-ß1 promotes fibrocytes differentiation into myofibroblasts in a concentration-dependent manner, while TGF-ß1 stimulates the fibrocytes to differentiate into osteoblasts when combined with a high calcium and phosphorus environment. CONCLUSIONS: Our study revealed fibrocytes play an important role in the fibrogenesis and osteogenesis in fibrous epulis, and might serve as a therapeutic target for the inhibition of recurrence of fibrous epulides.

Association between dental visit behavior and mortality: a nationwide longitudinal cohort study from NHANES.

OBJECTIVES: The benefits of professional dental treatment for oral diseases have been widely investigated. However, it is unclear whether professional dental treatment provides additional benefits for improving general health. MATERIALS AND METHODS: Data were obtained from the US National Health and Nutrition Examination Survey (NHANES) 1999 to 2004 and 2011 to 2018 cycles. A total of 36,174 participants were included and followed-up for mortality until December 31, 2019. Dental visit behavior was defined as the time interval of last dental visit (TIDV, < 0.5 year, 0.5-1 year, 1-2 years, 2-5 years, and > 5 years) and the main reasons of the last dental visit (treatment, examination, and other reasons). The Cox proportional risk model was used to estimate the hazard ratio (HR) and 95% confidence interval (CI). RESULTS: Compared with participants with time interval of less than 0.5 year, the multivariate-adjusted HRs and 95%CI for participants with time interval of more than 5 years were 1.45 (1.31, 1.61) for all-cause mortality (P trend < 0.0001), 1.49 (1.23, 1.80) for cardiovascular diseases mortality (P trend = 0.0009) and 1.53 (1.29, 1.81) for cancer mortality (P trend = 0.013). Compared with dental visit for examination, participants who had their dental visit for treatment had higher risk for mortality. For participants with dental visit for examination, TIDV of less than 1 year showed lower risk for mortality, whereas TIDV of less than 0.5 year is recommend for population with dental visit for treatment. CONCLUSIONS: Poor dental visit behavior is associated with an increased risk of mortality. Further well-designed studies are needed to confirm the association between professional dental visit and mortality. CLINICAL RELEVANCE: This study highlights the potential benefits of regular dental visits in maintaining general health.

Digital workflow for periodontal splinting with a guided device.

OBJECTIVE: To detail a technique for bonding periodontal splint precisely in a digital workflow. CLINICAL CONSIDERATIONS: Periodontal splinting can be considered to stabilize the mobile teeth, especially for mandibular anterior teeth. Reliable bonding of periodontal splints is a prerequisite for successful clinical performance. However, when bonding the indirect splint to place or making direct splint intraorally, there is a significant risk of mobile teeth drifting away from the splint. To guide accurate insertion of periodontal splint with no risk of displacement of mobile teeth, a guide device fabricated by digital workflow is introduced in this article. CONCLUSIONS: Periodontal compromised teeth can be provisionally fixed during splinting, with the help of the guided device, and precise bonding of the splint is readily accomplished by using such digital workflow. This technique is not only applicable to the lingual splints, but also suitable for the labial ones. CLINICAL SIGNIFICANCE: The use of a guided device, after being digitally designed and fabricated, enables to stabilize the mobile teeth, in case of any displacement during splinting. It is straightforward, and beneficial to reduce the risk of complications, such as debonding of the splint, and secondary occlusal trauma.

A method to improve positioning of denture teeth on denture bases for CAD-CAM complete dentures: A dental technique.

In the digital workflow of complete denture fabrication, one solution for producing computer-aided design and computer-aided manufacturing dentures has been to mill the denture teeth and base separately and then bond them together. The correct bonding of the denture teeth and base is important to reproduce the designed occlusion in the definitive prosthesis. A novel technique is described to assist in the accurate positioning of denture teeth on the denture base by constructing auxiliary positioning slots on the denture base and auxiliary positioning posts on the denture teeth. The technique can assist in accurately assembling CAD-CAM milled complete dentures and may shorten chairside time by reducing clinical occlusal adjustment.

Associations among gastroesophageal reflux disease, mental disorders, sleep and chronic temporomandibular disorder: a case-control study.

BACKGROUND: Temporomandibular disorders (TMDs) are a family of pain-related disorders associated with impaired function in the jaw, temporomandibular joint and muscles of mastication. Our objectives were to evaluate the association between chronic TMD and gastresophageal reflux disease (GERD) and to determine whether mental disorders or undermined sleep mediates this association. METHODS: We conducted a case-control study involving 1522 consecutive adult patients with chronic TMD and 1522 matched controls from 2 hospitals in China. All participants were aged between 18 and 70 years and were recruited from July 2017 to April 2018 Chronic TMD was diagnosed by trained dentists using the criteria in the Orofacial Pain Prospective Evaluation and Risk Assessment Study. Trained gastroenterologists made blinded diagnoses of GERD according to the Montreal definition and classification (at least 2 d of mild symptoms, or 1 d of moderate or severe symptoms per week). We used validated questionnaires to evaluate psychological status and sleep quality. RESULTS: Of the study participants, we identified 132 patients and 61 controls with GERD. Using conditional logistic regression analysis, we identified GERD as a risk factor for TMD (odds ratio 2.74, 95% confidence interval 1.88 to 3.98). Mediation analyses identified that somatization, anxiety and undermined sleep moderately mediated the relation between TMD and GERD. INTERPRETATION: Our study suggests that symptomatic GERD is associated with chronic, painful TMD, and somatization, anxiety and undermined sleep mediate this association to a certain extent. Due consideration should be given to the evaluation and management of gastrointestinal symptoms and mental disorders in the combined therapy for painful TMD.

Co-delivery of paclitaxel and gemcitabine by methoxy poly(ethylene glycol)-poly(lactide-coglycolide)-polypeptide nanoparticles for effective breast cancer therapy.

Traditional chemotherapeutic drugs have shown limited clinical curative effects in antitumor therapy. The application of multidrug combination and adjuvant-drug carriers is a feasible strategy to overcome the limitations while minimizing the dosage of single drug and acquiring the synergistic effects in tumor therapy. However, the systemic toxicity, drug resistance, and tumor recurrence are still unavoidable. Here we develop core-shell nanoparticles (NPs) to encapsulate paclitaxel (PTX) and gemcitabine (GEM) for breast cancer therapy. We find that the NPs could encapsulate PTX and GEM, with an encapsulation efficiency of 96.3 and 95.13%, respectively. Moreover, the drug loading of these NPs is 2.71% (PTX) and 2.64% (GEM). Notably, the co-delivery of GEM and PTX performs enhanced anticancer effect compared with the PTX alone or GEM alone therapy at the same concentration, which indicates a synergistic effect. Moreover, encapsulation of PTX and GEM by methoxy poly(ethylene glycol)-poly(lactide-coglycolide) also shows enhanced anticancer effects (81.5% tumor inhibition) and reduced systemic toxicity in vivo compared with free drugs (65% tumor inhibition). Together with those results, co-delivery of PTX and GEM by methoxy poly(ethylene glycol)-poly(lactide-coglycolide) might have important potencies in clinical applications for breast cancer therapy.

Air Entrapment in Demineralized Dentin Adversely Affects Bonding.

PURPOSE: The present study evaluated the influence of air entrapment within demineralized dentin on bond strength, nanoleakage, and degree of conversion. MATERIALS AND METHODS: A vacuum pump with adjustable pressure was used to control the gaseous pressure of a sealed container during the application of a two-step etch-and-rinse adhesive to demineralized dentin. Atmospheric pressure was used as control, and reduced pressures (0.08, 0.06, 0.04 MPa) as experimental variables. Simulated pulpal pressure was adopted during the bonding procedures. After making composite buildups and 24-h water storage, 48 specimens were occlusogingivally sectioned into beams for microtensile bond strength testing, interfacial morphology observation, and nanoleakage evaluation immediately (6 for each group) or after artificial aging (6 for each group); 20 specimens (5 for each group) were occlusogingivally sectioned into slices for degree of conversion testing. Failure modes were compared using the chi-squared test. The other data were analyzed using ANOVA. RESULTS: When air within composite-dentin interface was thinned with reduced pressures, more thorough adhesive infiltration was achieved, and less distinct nanoleakage as well as higher bond strength were observed compared with control groups, regardless of artificial aging. Mixed failure was predominantly identified, and its percentage was higher in the reduced pressure groups than in the controls. Adhesive application at reduced pressure improved the degree of conversion. CONCLUSION: Air entrapment in the demineralized dentin adversely affects composite-dentin bonds. Adhesive application at reduced pressure is helpful for reducing entrapped air, thereby improving the durability of composite-dentin bonds.

Gingival pigmentation by Ni-Cr-based metal ceramic crowns: A clinical report.

This clinical report describes treatment of a patient with gingival pigmentation after the restoration of the right maxillary canine and first premolar with Ni-Cr-based metal ceramic crowns and investigation of mechanisms of gingival discoloration. Histopathological observation and energy dispersive x-ray spectroscopy analysis of the retrieved pigmented gingiva revealed brown deposits both in the epithelial cells and along the basement membranes but no trace of Ni or Cr elements in the pigmented particles, indicating that the gingival pigmentation adjacent to the Ni-Cr-based metal ceramic prosthesis may not be caused by direct deposition of the released ions.

A feasible method to eliminate nanoleakage in dentin hybrid layers.

PURPOSE: To determine whether high-pressure air blowing during adhesive application affects the infiltration of resin comonomers and nanoleakage manifestation in the resin/dentin interface under simulated pulpal pressure. MATERIALS AND METHODS: Thirty mid-coronal dentin surfaces were bonded with an etch-and-rinse adhesive (Adper Single Bond 2) under simulated pulpal pressure. In the control group, the adhesive was thinned by ordinary air blowing with a pressure of 0.2 MPa, while in the experimental group, a high-pressure air blowing technique (pressure: 0.4 MPa) was used. All other procedures followed the manufacturer's instructions. Resin tag formation and nanoleakage in the bonding interface were evaluated with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). RESULTS: When adhesive was thinned with high pressure air blowing, longer and more homogeneous resin tags were formed. The bonding interface demonstrated good overall morphology and integrity. Almost perfect infiltration of resin and no obvious nanoleakage were observed. CONCLUSION: Thinning of adhesive with high-pressure air blowing provides a clinically feasible adjunctive procedure for better resin infiltration.

Occlusal contact characteristics of molar teeth with food impaction: Insights from a new digital technique.

OBJECTIVES: The objective of this study was to analyze the occlusal contact characteristics of the food-impacted teeth using a new digital technique. METHODS: A 3D occlusal analysis method was developed for studying the occlusal contact characteristics of teeth affected by food impaction. In this self-controlled study, food-impacted molars from 20 participants constituted the experimental group. The corresponding healthy teeth on the opposite side served as the control group. Variables such as occlusal force (OF), occlusal contact area (OCA), and the number and distribution of occlusal contact points (OCN) in the mesio-distal directions were measured and compared between the two groups. RESULTS: There was no statistical significant difference in the values of OF, OCA and OCN between the food-impacted molars and the healthy control molars (P > 0.05). However, paired T-tests indicated significant difference in the proportion of mesial OF, OCA, and OCN in the second molars of the experimental group (0.22, 0.28 and 0.28, respectively) and the control group (0.66, 0.63, and 0.63 respectively) (P < 0.001). CONCLUSIONS: The abnormal distribution of occlusal contacts in the second molar, primarily characterized by excessive occlusal contact in the distal direction may contribute to the occurrence of food impaction. CLINICAL SIGNIFICANCE: The present study identified variations in the distribution of occlusal contacts and occlusal component force in food-impacted teeth. These findings can assist dentists in making more targeted occlusal adjustments, or applying other treatment modalities, to effectively address food impaction.

Recent advances in the pathogenesis and prevention strategies of dental calculus.

Dental calculus severely affects the oral health of humans and animal pets. Calculus deposition affects the gingival appearance and causes inflammation. Failure to remove dental calculus from the dentition results in oral diseases such as periodontitis. Apart from adversely affecting oral health, some systemic diseases are closely related to dental calculus deposition. Hence, identifying the mechanisms of dental calculus formation helps protect oral and systemic health. A plethora of biological and physicochemical factors contribute to the physiological equilibrium in the oral cavity. Bacteria are an important part of the equation. Calculus formation commences when the bacterial equilibrium is broken. Bacteria accumulate locally and form biofilms on the tooth surface. The bacteria promote increases in local calcium and phosphorus concentrations, which triggers biomineralization and the development of dental calculus. Current treatments only help to relieve the symptoms caused by calculus deposition. These symptoms are prone to relapse if calculus removal is not under control. There is a need for a treatment regime that combines short-term and long-term goals in addressing calculus formation. The present review introduces the mechanisms of dental calculus formation, influencing factors, and the relationship between dental calculus and several systemic diseases. This is followed by the presentation of a conceptual solution for improving existing treatment strategies and minimizing recurrence.

Biomimetic Self-Maturation Mineralization System for Enamel Repair.

Enamel repair is crucial for restoring tooth function and halting dental caries. However, contemporary research often overlooks the retention of organic residues within the repair layer, which hinders the growth of dense crystals and compromises the properties of the repaired enamel. During the maturation of natural enamel, the organic matrix undergoes enzymatic processing to facilitate further crystal growth, resulting in a highly mineralized tissue. Inspired by this process, a biomimetic self-maturation mineralization system is developed, comprising ribonucleic acid-stabilized amorphous calcium phosphate (RNA-ACP) and ribonuclease (RNase). The RNA-ACP induces initial mineralization in the form of epitaxial crystal growth, while the RNase present in saliva automatically triggers a biomimetic self-maturation process. The mechanistic study further indicates that RNA degradation prompts conformational rearrangement of the RNA-ACP, effectively excluding the organic matter introduced earlier. This exclusion process promotes lateral crystal growth, resulting in the generation of denser enamel-like apatite crystals that are devoid of organic residues. This strategy of eliminating organic residues from enamel crystals enhances the mechanical and physiochemical properties of the repaired enamel. The present study introduces a conceptual biomimetic mineralization strategy for effective enamel repair in clinical practice and offers potential insights into the mechanisms of biomineral formation.

Bacteria-mediated resistance of neutrophil extracellular traps to enzymatic degradation drives the formation of dental calculi.

Dental calculi can cause gingival bleeding and periodontitis, yet the mechanism underlying the formation of such mineral build-ups, and in particular the role of the local microenvironment, are unclear. Here we show that the formation of dental calculi involves bacteria in local mature biofilms converting the DNA in neutrophil extracellular traps (NETs) from being degradable by the enzyme DNase I to being degradation resistant, promoting the nucleation and growth of apatite. DNase I inhibited NET-induced mineralization in vitro and ex vivo, yet plasma DNases were ineffective at inhibiting ectopic mineralization in the oral cavity in rodents. The topical application of the DNA-intercalating agent chloroquine in rodents fed with a dental calculogenic diet reverted NET DNA to its degradable form, inhibiting the formation of calculi. Our findings may motivate therapeutic strategies for the reduction of the prevalence of the deposition of bacteria-driven calculi in the oral cavity.

Intrafibrillar silicification of collagen scaffolds for sustained release of stem cell homing chemokine in hard tissue regeneration.

Traditional bone regeneration strategies relied on supplementation of biomaterials constructs with stem or progenitor cells or growth factors. By contrast, cell homing strategies employ chemokines to mobilize stem or progenitor cells from host bone marrow and tissue niches to injured sites. Although silica-based biomaterials exhibit osteogenic and angiogenic potentials, they lack cell homing capability. Stromal cell-derived factor-1 (SDF-1) plays a pivotal role in mobilization and homing of stem cells to injured tissues. In this work, we demonstrated that 3-dimensional collagen scaffolds infiltrated with intrafibrillar silica are biodegradable and highly biocompatible. They exhibit improved compressive stress-strain responses and toughness over nonsilicified collagen scaffolds. They are osteoconductive and up-regulate expressions of osteogenesis- and angiogenesis-related genes more significantly than nonsilicified collagen scaffolds. In addition, these scaffolds reversibly bind SDF-1α for sustained release of this chemokine, which exhibits in vitro cell homing characteristics. When implanted subcutaneously in an in vivo mouse model, SDF-1α-loaded silicified collagen scaffolds stimulate the formation of ectopic bone and blood capillaries within the scaffold and abrogate the need for cell seeding or supplementation of osteogenic and angiogenic growth factors. Intrafibrillar-silicified collagen scaffolds with sustained SDF-1α release represent a less costly and complex alternative to contemporary cell seeding approaches and provide new therapeutic options for in situ hard tissue regeneration.

The integration of peri-implant soft tissues around zirconia abutments: Challenges and strategies.

Stable soft tissue integration around the implant abutment attenuates pathogen penetration, protects underlying bone tissue, prevents peri-implantitis and is essential in maintaining long-term implant stability. The desire for "metal free" and "aesthetic restoration" has favored zirconia over titanium abutments, especially for implant restorations in the anterior region and for patients with thin gingival biotype. Soft tissue attachment to the zirconia abutment surface remains a challenge. A comprehensive review of advances in zirconia surface treatment (micro-design) and structural design (macro-design) affecting soft tissue attachment is presented and strategies and research directions are discussed. Soft tissue models for abutment research are described. Guidelines for development of zirconia abutment surfaces that promote soft tissue integration and evidence-based references to inform clinical choice of abutment structure and postoperative maintenance are presented.

Mussel-inspired polymer with catechol and cationic Lys functionalities for dentin wet bonding.

Mussels can form tough and long-lasting adhesions to organic and inorganic surfaces in saline and impactive severe aquatic environments. Similar to mussel adhesion, dentin bonding occurs in a wet environment. However, unlike mussels, it is difficult to achieve long-lasting bonds with dentin. Moreover, water is considered a major hindrance in dentin bonding. Inspired by the synergistic effect of cationic lysine (Lys) and catechol on the elimination of the hydration layer during mussel adhesion, a catechol- and Lys-functionalized polymerizable polymer (catechol-Lys-methacrylate [CLM]) was synthesized to replicate the complex synergy between amino acids and catechol. The bond-promoting potential of 5 â€‹mg/mL CLM primer was confirmed using an in vitro wet dentin-bonding model, which was characterized by an improvement in bond strength and durability. CLM can adhere to wet demineralized dentin, with Lys acting as a molecular vanguard to expel water. Subsequently, a myriad of interfacial interactions can be obtained by introducing the catechol group into the interface. Additionally, tough and long-lasting adhesion, similar to that formed by mussels, can be achieved by grafting CLM onto type I collagen via covalent bonds, hydrogen bonds, Van der Waals interactions, and cation-π interactions, which can enhance the mechanical and chemical stability of collagen, increase the enzymatic resistance of collagen, and provide additional physical/chemical adhesion to dentin bonds. Catechol- and cationic Lys-functionalized polymers can improve the stability of the resin-dentin interface under wet conditions.

Construction of Nanostructured Glass-Zirconia to Improve the Interface Stability of Dental Bilayer Zirconia.

Bilayer zirconia restoration is one of the most commonly used restorations in dental practice, but the high frequency of the cohesive/adhesive fracture of veneered porcelain is still a problem. This paper focuses on the development of nanostructured glass-zirconia to improve the interface stability of dental zirconia substrate and veneered porcelain. A novel SiO2-Li2O-Al2O3 (SLA) glass was prepared and infiltrated into the surface of fully sintered dental zirconia to obtain nanostructured glass-zirconia structure. The prepared glass-zirconia was analyzed with scanning electron microscopes (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction spectroscopy (XRD). The wettability, roughness and 3D morphology of zirconia were altered, and shear bonding strength (SBS) test demonstrated almost double increase in SBS values of the nanostructured glass-zirconia structure. The failure modes and microstructure characteristics also verified the improved interfacial stability. This investigation provides a promising method for enhancing the structural stability of bilayer zirconia restorations.

Advances in materials-based therapeutic strategies against osteoporosis.

Osteoporosis is caused by the disruption in homeostasis between bone formation and bone resorption. Conventional management of osteoporosis involves systematic drug administration and hormonal therapy. These treatment strategies have limited curative efficacy and multiple adverse effects. Biomaterials-based therapeutic strategies have recently emerged as promising alternatives for the treatment of osteoporosis. The present review summarizes the current status of biomaterials designed for managing osteoporosis. The advantages of biomaterials-based strategies over conventional systematic drug treatment are presented. Different anti-osteoporotic delivery systems are concisely addressed. These materials include injectable hydrogels and nanoparticles, as well as anti-osteoporotic bone tissue engineering materials. Fabrication techniques such as 3D printing, electrostatic spinning and artificial intelligence are appraised in the context of how the use of these adjunctive techniques may improve treatment efficacy. The limitations of existing biomaterials are critically analyzed, together with deliberation of the future directions in biomaterials-based therapies. The latter include discussion on the use of combination strategies to enhance therapeutic efficacy in the osteoporosis niche.

Optimization of Lactoferrin-Derived Amyloid Coating for Enhancing Soft Tissue Seal and Antibacterial Activity of Titanium Implants.

A poor seal of the titanium implant-soft tissue interface provokes bacterial invasion, aggravates inflammation, and ultimately results in implant failure. To ensure the long-term success of titanium implants, lactoferrin-derived amyloid is coated on the titanium surface to increase the expression of cell integrins and hemidesmosomes, with the goal of promoting soft tissue seal and imparting antibacterial activity to the implants. The lactoferrin-derived amyloid coated titanium structures contain a large number of amino and carboxyl groups on their surfaces, and promote proliferation and adhesion of epithelial cells and fibroblasts via the PI3K/AKT pathway. The amyloid coating also has a strong positive charge and possesses potent antibacterial activities against Staphylococcus aureus and Porphyromonas gingivalis. In a rat immediate implantation model, the amyloid-coated titanium implants form gingival junctional epithelium at the transmucosal region that resembles the junctional epithelium in natural teeth. This provides a strong soft tissue seal to wall off infection. Taken together, lactoferrin-derived amyloid is a dual-function transparent coating that promotes soft tissue seal and possesses antibacterial activity. These unique properties enable the synthesized amyloid to be used as potential biological implant coatings.

Association of Tooth Loss and Diet Quality with Acceleration of Aging: Evidence from NHANES.

BACKGROUND: Although tooth loss is widely recognized as a typical sign of aging, whether it is associated with accelerated aging, and to what extent diet quality mediates this association are unknown. METHODS: Data were collected from the National Health and Nutrition Examination Survey. The missing tooth counts were recorded as the number of edentulous sites. Phenotypic accelerated aging was calculated using 9 routine clinical chemistry biomarkers and chronological age. Healthy Eating Index 2015 (HEI-2015) score was used to evaluate diet quality. Multivariate logistic regression and linear regression were used to analyze the association between tooth loss and accelerated aging. Mediation analyses were used to examine the mediation role of diet quality in the association. RESULTS: The association between tooth loss and accelerated aging was confirmed. The highest quartile of tooth loss showed a positive association with accelerated aging (ß=1.090; 95% confidence interval, 0.555 to 1.625; P < .001). Diet quality decreased with increase number of missing teeth and showed a negative association with accelerated aging. Mediation analysis suggested that the HEI-2015 score partially mediated the association between tooth loss and accelerated aging (proportion of mediation: 5.302%; 95% confidence interval, 3.422% to 7.182%; P < .001). Plant foods such as fruits and vegetables were considered the key mediating food. CONCLUSIONS: The association between tooth loss and accelerated aging, as well as the partially mediating role of dietary quality in this association was confirmed. These findings suggested that more attention should be paid to the population with severe tooth loss and the changes of their dietary quality.