Effects of photochemical riboflavin-mediated crosslinks on the physical properties of collagen constructs and fibrils.

The use of collagen scaffold in tissue engineering is on the rise, as modifications to mechanical properties are becoming more effective in strengthening constructs whilst preserving the natural biocompatibility. The combined technique of plastic compression and cross-linking is known to increase the mechanical strength of the collagen construct. Here, a modified protocol for engineering these collagen constructs is used to bring together a plastic compression method, combined with controlled photochemical crosslinking using riboflavin as a photoinitiator. In order to ascertain the effects of the photochemical crosslinking approach and the impact of the crosslinks created upon the properties of the engineered collagen constructs, the constructs were characterized both at the macroscale and at the fibrillar level. The resulting constructs were found to have a 2.5 fold increase in their Young's modulus, reaching a value of 650 ± 73 kPa when compared to non-crosslinked control collagen constructs. This value is not yet comparable to that of native tendon, but it proves that combining a crosslinking methodology to collagen tissue engineering may offer a new approach to create stronger, biomimetic constructs. A notable outcome of crosslinking collagen with riboflavin is the collagen's greater affinity for water; it was demonstrated that riboflavin crosslinked collagen retains water for a longer period of time compared to non-cross-linked control samples. The affinity of the cross-linked collagen to water also resulted in an increase of individual collagen fibrils' cross-sectional area as function of the crosslinking. These changes in water affinity and fibril morphology induced by the process of crosslinking could indicate that the crosslinked chains created during the photochemical crosslinking process may act as intermolecular hydrophilic nanosprings. These intermolecular nanosprings would be responsible for a change in the fibril morphology to accommodate variable volume of water within the fibril.

Development of a facile method to compute collagen network pathological anisotropy using AFM imaging.

Type I collagen, a fundamental extracellular matrix (ECM) component, is pivotal in maintaining tissue integrity and strength. It is also the most prevalent fibrous biopolymer within the ECM, ubiquitous in mammalian organisms. This structural protein provides essential mechanical stability and resilience to various tissues, including tendons, ligaments, skin, bone, and dentin. Collagen has been structurally investigated for several decades, and variation to its ultrastructure by histology has been associated with several pathological conditions. The current study addresses a critical challenge in the field of collagen research by providing a novel method for studying collagen fibril morphology at the nanoscale. It offers a computational approach to quantifying collagen properties, enabling a deeper understanding of how collagen type I can be affected by pathological conditions. The application of Fast Fourier Transform (FFT) coupled with Atomic Force Microscope (AFM) imaging distinguishes not only healthy and diseased skin but also holds potential for automated diagnosis of connective tissue disorders (CTDs), contributing to both clinical diagnostics and fundamental research in this area. Here we studied the changes in the structural parameters of collagen fibrils in Ehlers Danlos Syndrome (EDS). We have used skin extracted from genetically mutant mice that exhibit EDS phenotype as our model system (Col1a1Jrt/+ mice). The collagen fibrils were analyzed by AFM based descriptive-structural parameters, coupled with a 2D Fast Fourier Transform(2D-FFT) approach that automated the analysis of AFM images. In addition, each sample was characterized based on its FFT and power spectral density. Our qualitative data showed morphological differences in collagen fibril clarity (clearness of the collagen fibril edge with their neighbouring fibri), D-banding, orientation, and linearity. We have also demonstrated that FFT could be a new tool for distinguishing healthy from tissues with CTDs by measuring the disorganization of fibrils in the matrix. We have also employed FFT to reveal the orientations of the collagen fibrils, providing clinically relevant phenotypic information on their organization and anisotropy. The result of this study can be used to develop a new automated tool for better diagnosis of CTDs.

A sutureless aortic stent-graft based on a nitinol scaffold bonded to a compliant nanocomposite polymer is durable for 10 years in a simulated in vitro model.

PURPOSE: To physiologically test the durability of a sutureless aortic stent-graft based on nitinol bonded to polyhedral oligomeric silsesquioxane (POSS) and poly(carbonate-urea) urethane (PCU) for 10 years according to Food and Drug Administration guidelines. METHODS: Aortic stent-grafts (n = 4) were tested in 37°C distilled water using simulated in vivo hydrodynamic pulse loading. After 400 million cycles, surface topography was assessed by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Dynamic compliance was measured using a pulsatile flow phantom. Mechanical and elastic properties were determined by stress-strain studies and elastic deformation tests. Dynamic scanning calorimetry (DSC) and thermomechanical analysis (TMA) were used to assess thermal resistance. Comparison was made with a zero-cycled control. RESULTS: All stent-grafts successfully completed accelerated pulsatile fatigue at 94±14-mmHg pulse pressure. SEM images confirmed uniform surface topography without any fractures. FTIR showed increased intensity of -NHCO- bonds, but there was no significant sign of biodegradation. Tensile stress of fatigue-tested polymer compared favorably with the zero-cycled control at 50% to 500% strain (p = 0.69). At a mean pressure range of 60 to 120 mmHg, overall compliance of the fatigue-tested grafts was 3.48±1.27%mmHg(-1)×10(-2) with no significant difference compared to control (3.26±0.65%mmHg(-1)×10(-2); p = 0.47). DSC and TMA showed comparable thermotropic transition. CONCLUSION: Simulated physiological in vivo hydrodynamic loading has no significant degradative effect on an innovative sutureless stent-graft made from POSS-PCU nanocomposite polymer. Sutureless technology incorporating nitinol stents proved to be robust, with no separation over an accelerated 10-year cycle, which may allow development of durable stent-grafts with better compliance.

Compromised dental cells viability following teeth-whitening exposure.

This study aimed to assess the viability of dental cells following time-dependent carbamide peroxide teeth-whitening treatments using an in-vitro dentin perfusion assay model. 30 teeth were exposed to 5% or 16% CP gel (4 h daily) for 2-weeks. The enamel organic content was measured with thermogravimetry. The time-dependent viability of human dental pulp stem cells (HDPSCs) and gingival fibroblast cells (HGFCs) following either indirect exposure to 3 commercially available concentrations of CP gel using an in-vitro dentin perfusion assay or direct exposure to 5% H2O2 were investigated by evaluating change in cell morphology and by hemocytometry. The 5% and 16% CP produced a significantly lower (p < 0.001) enamel protein content (by weight) when compared to the control. The organic content in enamel varied accordingly to the CP treatment: for the 16% and 5% CP treatment groups, a variation of 4.0% and 5.4%, respectively, was observed with no significant difference. The cell viability of HDPSCs decreased exponentially over time for all groups. Within the limitation of this in-vitro study, we conclude that even low concentrations of H2O2 and CP result in a deleterious change in enamel protein content and compromise the viability of HGFCs and HDPSCs. These effects should be observed in-vivo.

The degradative resistance of polyhedral oligomeric silsesquioxane nanocore integrated polyurethanes: an in vitro study.

Polymer biostability is one of the critical parameters by which these materials are selected for use as biomedical devices. This is the major rationale for the use of polymers which are highly crystalline and stiff namely expanded polytetrafluoroethylene (ePTFE) and Dacron in particular, as arterial bypass grafts. While this is immaterial in high-flow states, it becomes critically important at lower flows with a greater need for more compliant vessels. Polyurethanes being one of the most compliant polymers known are as such, the natural choice to build such constructs. However, concerns regarding their resistance to degradation have limited their use as vascular prostheses and in order to augment their strength, herein a novel polyhedral oligomeric silsesquioxane integrated poly(carbonate-urea)urethane (POSS-PCU) nanocomposite was synthesised by our group. In the following series of experiments, the POSS-PCU nanocomposite samples were exposed to accelerated degradative solutions, in an 'in-house' established model in vitro for up to 70 days before being subjected to infra-red spectroscopy, scanning electron microscopy, stress-strain studies and differential scanning calorimetry. Our results demonstrate that these silsesquioxane nanocores shield the soft segment(s) of the polyurethane, responsible for its compliance and elasticity from all forms of degradation, principally oxidation and hydrolysis. These nanocomposites hence provide an optimal method by which these polymers may be strengthened whilst maintaining their elasticity, making them ideal as vascular prostheses particularly at low flow states.

Review paper: principles and applications of surface analytical techniques at the vascular interface.

Surface properties have been found to be one of the key parameters which cause degradation and of thrombogenicity in all polymers used in biomedical devices, thus signifying the importance and the necessity for quantitative and accurate characterization of the polymer surface itself as used in the construction of the device. The characterization techniques employed generally involve thermal and spectroscopic measurements, in which class the electrochemical investigations and scanning probe microscopies can also be included. Current hypotheses on the correlations that exist between surface parameters and hemocompatibility and degradation of polymers are examined herein, but concentrating on the field of clinically utilized polymeric materials as used within medical devices themselves. Furthermore, this review provides a brief but complete synopsis of these techniques and other emerging ones, which have proven useful in the analysis of the surface properties of polymeric materials as used in the construction of cardiovascular devices. Statements and examples are given as to how specific information can be acquired from these differing methodologies and how it aids in the design and development of new polymers for usage in biomedical device construction.

Atomic force microscopy of collagen structure in bone and dentine revealed by osteoclastic resorption.

Mineralised tissues such as bone consist of two material phases: collagen protein fibrils, secreted by osteoblasts, form model structures for subsequent deposition of mineral, calcium hydroxyapatite. Collagen and mineral are removed in a three-dimensional manner by osteoclasts during bone turnover in skeletal growth or repair. Bone active drugs have recently been developed for skeletal diseases, and there is revived interest in changes in the structure of mineralised tissues seen in disease and upon treatment. The resolution of atomic force microscopy and use of unmodified samples has enabled us to image bone and dentine collagen exposed by the natural process of cellular dissolution of mineralised matrix. The morphology of bone and dentine has been analysed when fully mineralised and after osteoclast-mediated bone resorption, and compared with results from other microscopy techniques. Banded type I collagen, with 66.5+/-1.4 nm axial D-periodicity and 62.2+/-7.0 nm diameter, has been identified within resorption lacunae in bone and 69.4+/-4.3 nm axial D-periodicity and 140.6+/-12.4 nm diameter in dentine substrates formed by human and rabbit osteoclasts, respectively. This observation suggests a route by which the material and morphological properties of bone collagen can be analysed in situ, compared with collagen from non-skeletal sites, and contrasted in diseases of medical importance, such as osteoporosis, where skeletal tissue is mechanically weakened.

Thermo-mechanical analysis of a compliant poly(carbonate-urea)urethane after exposure to hydrolytic, oxidative, peroxidative and biological solutions.

AIMS: To date, there is still a great need for a fully viable small diameter (< 6 mm) polymeric vascular graft. Currently in such low flow locations, non-elastic expanded polytetrafluoroethylene (ePTFE) is the best available but it is quite inferior to autologous saphenous vein since it fails due to intimal hyperplasia caused by compliance mismatch between the graft and elastic host artery. Recently, a novel compliant poly(carbonate-urea)urethane vascular graft whose trade name is MyoLink has been developed. In this article, we report the findings of a thermo-mechanical analysis of the polymers chemistry postexposure to in vitro solutions comprised of hydrolytic, oxidative, peroxidative and biological media. METHODS AND MATERIALS: The following degradative solutions were used in vitro: plasma fractions I-IV; phospholipase A2 (PLA); cholesterol esterase (CE) and solutions of H2O2/CoCl2, t-butyl peroxide/CoCl2 (t-but/CoCl2) and glutathione/t-butyl peroxide/ CoCl2 (glut/t-but/CoCl2). The MyoLink graft was compared against a conventional poly(ether)urethane (Pulse-Tec). All the graft specimens were 100 mm in length (5.0 mm ID) and were incubated in the latter solutions at 37 degrees C for 70 days in total. The following thermo-mechanical methods were used to analyse both graft types: thermo-mechanical analysis (TMA) and dynamic mechanical thermal analysis (DMTA). RESULTS: Incubation of Pulse-Tec in plasma fractions I-IV, PLA and CE reveals only one observable modification: an increase in the size of the low temperature, melting phase. But incubation in H2O2/CoCl2, and t-but/CoCl2 leads to an increase in the polymeric phase separation coupled with an enlargement in the size of the low temperature melting crystalline phase in Pulse-Tec. The glut/t-but/CoCl2 solution leads to a phase separation between the hard and soft segment domains, coupled with an increase of the internal order within the hard segment domains in Pulse-Tec. The only system in which MyoLink degraded was glut/t-but/CoCl2. In this system, an increase of the phase separation coupled with a simultaneous increase of the crystal size of the low-temperature melting crystalline phase occurred. CONCLUSION: This study shows dramatic changes in the chemistry of the soft and hard segments occurred in the case of the conventional poly(ether)urethane Pulse-Tec graft material. Such changes were not manifested in the majority of solutions in the case of MyoLink but a hydrolytic-led degradation of the carbonate soft segment was evidenced only in the glut/t-but/CoCl2 system.

Silsesquioxane nanocomposites as tissue implants.

BACKGROUND: Silicone implants are being used increasingly worldwide, especially in breast augmentation procedures. The most common morbidity observed is capsular contracture, which occurs in 15 percent of cases. To overcome this problem, the authors have developed a novel nanocomposite based on polyhedral oligomeric silsesquioxane-poly(carbonate-urea)urethane (POSS-PCU) for use as tissue implants. METHODS: These polymers were implanted in six healthy sheep (n = 6) for 36 months and a siloxane served as the positive control. After explantation, these polymers were extracted, as was the surrounding capsule, if any. Attenuated total reflectance Fourier transform infrared spectroscopy analysis was performed to look for signs of surface degradation on the polymers and histopathologic and electron microscopic examinations were performed to study the interaction between the biomaterial and the host environment in greater detail. RESULTS: After implantation, the authors observed minimal inflammation of the nanocomposite within the sheep model as compared with the siloxane control. Contact angle measurements and fibrinogen enzyme-linked immunosorbent assay tests were then conducted on the POSS-PCU nanocomposite to determine the reason for this behavior. The increased fibrinogen adsorption on POSS-PCU, its amphilicity, and large contact-angle hysteresis indicated that POSS-PCU inhibits inflammation by adsorbing and inactivating fibrinogen on its surface. In complete contrast, the control siloxane in the same setting demonstrated very significant inflammation and degradation, resulting in capsular formation. Naturally, there was no evidence of degradation of the nanocomposite compared with the siloxane control. CONCLUSIONS: POSS-PCU nanocomposites have enhanced interfacial biocompatibility and better biological stability as compared with conventional silicone biomaterials, thus making them safer as tissue implants.

Analysis and optimization of the cationic lipid component of a lipid/peptide vector formulation for enhanced transfection in vitro and in vivo.

We have previously described a lipopolyplex formulation comprising a mixture of a cationic peptide with an integrin-targeting motif (K16GACRRETAWACG) and Lipofectin, a liposome consisting of DOTMA and DOPE in a 1:1 ratio. The high transfection efficiency of the mixture involved a synergistic interaction between the lipid/peptide components. The aim of this study was to substitute the lipid component of the lipopolyplex to optimize transfection further and to seek information on the structure-activity relationship of the lipids in the lipopolyplex. Symmetrical cationic lipids with diether linkages that varied in alkyl chain length were formulated into liposomes and then incorporated into a lipopolyplex by mixing with an integrin-targeting peptide and plasmid DNA. Luciferase transfections were performed of airway epithelial cells and fibroblasts in vitro and murine lung airways in vivo. The biophysical properties of lipid structures and liposome formulations and their potential effects on bilayer membrane fluidity were determined by differential scanning calorimetry and calcein-release assays. Shortening the alkyl tail from C18 to C16 or C14 enhanced lipopolyplex and lipoplex transfection in vitro but with differing effects. The addition of DOPE enhanced transfection when formulated into liposomes with saturated lipids but was more variable in its effects with unsaturated lipids. A substantial improvement in transfection efficacy was seen in murine lung transfection with unsaturated lipids with 16 carbon alkyl tails. The optimal liposome components of lipopolyplex and lipoplex vary and represent a likely compromise between their differing structural and functional requirements for complex formation and endosomal membrane destabilization.