Percutaneous Cementoplasty for the Pelvis in Bone Metastasis: 12-Year Experience.

BACKGROUND: In advanced cancer patients, pelvic bone metastasis often causes pain and gait disturbance. The use of percutaneous bone cement [polymethylmethacrylate (PMMA)] injection for pain management and strengthening in pelvic bone metastasis has rarely been reported. To evaluate this method, we aimed to determine surgical outcomes and complications over a long-term follow-up period using a large patient group. PATIENTS AND METHODS: We retrospectively collected data from 178 patients who underwent percutaneous cementoplasty for pelvic metastatic lesions, 201 in total. Surgical outcomes evaluated included pain reduction and improvement of ambulation. Mortality within 1 month after procedure and pulmonary embolism caused by thrombus, fat, tumor emboli, or bone cement were investigated as surgical complications. For long-term survivors, pain relapse and mechanical failure were analyzed. The mean follow-up period was 12.6 months, and there were 159 fatalities at last follow-up. RESULTS: The mean regional pain numerical rating scale scores decreased from 6.1 preoperatively to 2.4 1 month after procedure (p < 0.01). Gait function was maintained, worsened, and uncheckable in 68%, 24%, and 8% of patients, respectively, 1 month after procedure. Of long-term survivors followed up for > 12 months (n = 53), there were no significant changes in serial plain radiographs, and regional pain aggravation was observed in 9%. Pulmonary cement embolism and bone cement implantation syndrome was observed in 11% and 10%, respectively. However, all patients with these complications were asymptomatic. CONCLUSIONS: Percutaneous cement injection into the pelvis is a feasible and safe palliative surgical option for patients with advanced malignancy in terms of pain reduction and maintenance of ambulatory function under regional anesthesia.

Enhanced Regeneration of Vascularized Adipose Tissue with Dual 3D-Printed Elastic Polymer/dECM Hydrogel Complex.

A flexible and bioactive scaffold for adipose tissue engineering was fabricated and evaluated by dual nozzle three-dimensional printing. A highly elastic poly (L-lactide-co-ε-caprolactone) (PLCL) copolymer, which acted as the main scaffolding, and human adipose tissue derived decellularized extracellular matrix (dECM) hydrogels were used as the printing inks to form the scaffolds. To prepare the three-dimensional (3D) scaffolds, the PLCL co-polymer was printed with a hot melting extruder system while retaining its physical character, similar to adipose tissue, which is beneficial for regeneration. Moreover, to promote adipogenic differentiation and angiogenesis, adipose tissue-derived dECM was used. To optimize the printability of the hydrogel inks, a mixture of collagen type I and dECM hydrogels was used. Furthermore, we examined the adipose tissue formation and angiogenesis of the PLCL/dECM complex scaffold. From in vivo experiments, it was observed that the matured adipose-like tissue structures were abundant, and the number of matured capillaries was remarkably higher in the hydrogel-PLCL group than in the PLCL-only group. Moreover, a higher expression of M2 macrophages, which are known to be involved in the remodeling and regeneration of tissues, was detected in the hydrogel-PLCL group by immunofluorescence analysis. Based on these results, we suggest that our PLCL/dECM fabricated by a dual 3D printing system will be useful for the treatment of large volume fat tissue regeneration.

Preliminary results: use of multi-hole injection nails for intramedullary nailing with simultaneous bone cement injection in long-bone metastasis.

OBJECTIVE: For symptomatic metastasis of the long bones, intramedullary nailing has been the most accepted fixation method. Intramedullary nailing has effective control of pain, perioperative bleeding, and local tumor progression by augmentation with bone cement around the nail. Here, we report the preliminary results of a new surgical implant that allows for simultaneous injection of bone cement while inserting a percutaneous, flexible intramedullary nail. MATERIALS AND METHODS: We performed palliative surgeries for long-bone metastasis using a multi-hole injection nail (MIN) with multiple side holes in the distal one third. When the nail tip entered the metastatic cancer lesion, the bone cement injection was started, and continued until the nail was completely seated. Ten patients with advanced cancer underwent palliative surgery using the new implant with simultaneous bone cement injection for humeral (n = 4), femoral (n = 4), and tibial (n = 2) metastases. RESULTS: The mean operative time was 42 min (range, 36-52 min). The mean length of the injection nail was 23.0 cm (range, 18.0-33.0 cm), and the mean volume of cement was 28.0 ml (range, 14.0-40.0 ml). Marked pain palliation (p < 0.001) and functional recovery (p = 0.01) were verified. The mean Musculoskeletal Tumor Society (MSTS) functional score improved significantly from 12.5 at 6 weeks preoperatively, to 24.9 postoperatively. No acute postoperative complications, including cement embolism, occurred. CONCLUSION: This minimally invasive surgical method with MIN could be useful for stabilization of long-bone metastases in patients with advanced cancer.

Joint-preserving palliative surgery using self-locking screws of intramedullary nail and percutaneous cementoplasty for proximal humeral metastasis in the advanced cancer patients.

BACKGROUND: We introduced a palliative joint-preserving surgery using proximal self-locking screws of intramedullary (IM) nail and percutaneous cementoplasty (PC) in patients with proximal humeral metastases, including the head and neck, and evaluated the outcome of the surgical method. METHODS: Twenty-three patients (mean age = 63.0 ± 11.8 years, M:F = 14:9) had IM nailing with a self-locking screw system and PC for the treatment of humeral head and neck metastases. Usually, three proximal locking screws were inserted after IM nailing, and 20.9 ± 8.0 ml of polymethylmethacrylate (PMMA) bone cement was injected in the perimetal osteolytic area. RESULTS: Regional anesthesia with interscalene block was performed in 87.0% (20/23), and the duration of surgery (from anesthesia to awakening) was approximately 40-55 min. Red blood cell was not transfused intra- and/or postoperatively in 65.2% (15/23). The localized preoperative pain (visual analog scale (VAS), 8.2 ± 3.1) was gradually decreased at postoperative 1 week (VAS, 4.9 ± 2.1) and at 6 weeks (VAS, 2.9 ± 2.1) (P < 0.001). Among nine patients who underwent F-18-FDG PET/CT, the proximal humeral metastasis around PC showed improved, stable, and aggravated states in five (55.6%), three (33.3%), and one patient (11.1%), respectively. Meanwhile, 88.8% (8/9) of patients showed aggravation at the naive bone metastasis area. CONCLUSION: The selection of the self-locking screw type of the IM nail and PC was helpful in preventing fixation failure for joint-preserving palliative surgery in the proximal humeral metastasis.

Magnesium Corrosion Triggered Spontaneous Generation of H2O2 on Oxidized Titanium for Promoting Angiogenesis.

Although the use of reactive oxygen species (ROS) has been extensively studied, current systems employ external stimuli such as light or electrical energy to produce ROS, which limits their practical usage. In this report, biocompatible metals were used to construct a novel electrochemical system that can spontaneously generate H2O2 without any external light or voltage. The corrosion of Mg transfers electrons to Au-decorated oxidized Ti in an energetically favorable process, and the spontaneous generation of H2O2 in an oxygen reduction reaction was revealed to occur at titanium by combined spectroscopic and electrochemical analyses. The controlled release of H2O2 noticeably enhanced in vitro angiogenesis even in the absence of growth factors. Finally, a new titanium implant prototype was developed by Mg incorporation, and its potential for promoting angiogenesis was demonstrated.

Whole Blood Titanium Concentration after Limb Salvage Surgery with Three-Dimensional-Printed Ti6Al4V Implants.

Background: Three-dimensional (3D)-printed customized implants can be fabricated and utilized for all bones with massive bone defects. The main safety issues with 3D-printed implants made of Ti6Al4V alloy are related to the release of metal debris and residual powder. In this study, we investigated the perioperative titanium concentrations in whole blood and peri-implant fluid samples of patients who underwent limb salvage surgery with a 3D-printed Ti6Al4V implant. Methods: Nineteen patients who underwent limb salvage surgery with 3D-printed Ti6Al4V implants were divided into two groups: the serial samples group and the follow-up group. To observe metal distribution and clearance in the body, serial samples of blood and peri-implant fluid from the surgical drain were prospectively collected for five patients in the serial samples group. For the remaining 14 patients who were followed up for more than a year, blood samples were collected only once. Results: In the serial samples group, the mean baseline titanium concentration was 0.78 µg/L (range, 0.1-2.2 µg/L): 3 patients showed peak concentration before the third postoperative month, while 2 patients still showed an increasing pattern at this point. Total titanium mass in the surgical drain showed a wash-out phenomenon in a week, with a significant uniform decrease (p = 0.04). In 14 patients in the follow-up group, the mean titanium concentration in the whole blood was 10.8 µg/L (range, 0.3-36.6 µg/L). For the 14 patients with a long-term follow-up, the aluminum and vanadium concentrations were all negligible. Conclusions: Whole blood titanium concentrations were higher after surgery using 3D-printed implants than after that using conventional orthopedic implants, but markedly lower than in patients with implant failure. None of the patients developed serious clinical adverse effects during follow-up.

Evaluation of Intraosseous Pressure during Pelvic Percutaneous Cement Injection: An In Vitro Study in Swine.

Background: A minimally invasive procedure for symptomatic pelvic bone metastasis is a feasible option for advanced cancer patients, and bone cement injection plays an essential role. Pulmonary embolism caused by thrombus, fat, or tumor emboli is a major complication related to bone cement injection, and increasing intraosseous pressure is a predisposing factor. This study aimed to quantify the degree of pressure change in the pelvic bone during percutaneous bone cement injection and investigate whether there is a significant decrease in intraosseous pressure when a decompressive route is additionally established. Methods: Bone cement injection into the acetabulum of swine pelvises by simulating the actual surgical procedure in terms of the injection method, bone cement, and surgical instruments was performed while recording the intraosseous pressure. Twenty swine pelvises were used and grouped into a decompression group and a non-decompression group. Bone cement injection and pressure measurement were conducted in the same way in both groups, but an additional decompressive route was established for each pelvis in the decompression group. Continuous variables were compared using the Mann-Whitney test. Results: The mean amount of injected bone cement was 19.8 mL and 20.3 mL and the mean speed of bone cement injection was 0.14 mL/sec and 0.12 mL/sec in the decompression group and the non-decompression group, respectively. The mean peak intraosseous pressures was 10.5 kPa with decompression and 37.8 kPa without decompression, and the difference was statistically significant (p < 0.01). Conclusions: Intraosseous pressure during bone cement injection into swine pelvises was similar to that during vertebroplasty or kyphoplasty. When the additional decompression route was established, the intraosseous pressure decreased to one third the level.

Development of a regenerative porous PLCL nerve guidance conduit with swellable hydrogel-based microgrooved surface pattern via 3D printing.

Peripheral nerve injury causes severe loss of motor and sensory functions, consequently increasing morbidity in affected patients. An autogenous nerve graft is considered the current gold standard for reconstructing nerve defects and recovering lost neurological functions; however, there are certain limitations to this method, such as limited donor nerve supply. With advances in regenerative medicine, recent research has focused on the fabrication of tissue-engineered nerve grafts as promising alternatives to the autogenous nerve grafts. In this study, we designed a nerve guidance conduit using an electrospun poly(lactide-co-ε-caprolactone) (PLCL) membrane with a visible light-crosslinked gelatin hydrogel. The PLCL nanoporous membrane with permeability served as a flexible and non-collapsible epineurium for the nerve conduit; the inner-aligned gelatin hydrogel paths were fabricated via 3D printing and a photocrosslinking system. The resultant gelatin hydrogel with microgrooved surface pattern was established as a conducting guidance path for the effective regeneration of axons and served as a reservoir that can incorporate and release bioactive molecules. From in vivo performance tests using a rat sciatic nerve defect model, our PLCL/gelatin conduit demonstrated successful axonal regeneration, remyelination capacities and facilitated functional recovery. Hence, the PLCL/gelatin conduit developed in this study is a promising substitute for autogenous nerve grafts. STATEMENT OF SIGNIFICANCE: Nerve guidance conduits (NGCs) are developed as promising recovery techniques for bridging peripheral nerve defects. However, there are still technological limitations including differences in the structures and components between natural peripheral nerve and NGCs. In this study, we designed a NGC composed of an electrospun poly(lactide-co-ε-caprolactone) (PLCL) membrane and 3D printed inner gelatin hydrogel to serve as a flexible and non-collapsible epineurium and a conducting guidance path, respectively, to mimic the fascicular structure of the peripheral nerve. In particular, in vitro cell tests clearly showed that gelatin hydrogel could guide the cells and function as a reservoir that incorporate and release nerve growth factor. From in vivo performance tests, our regenerative conduit successfully led to axonal regeneration with effective functional recovery.

Septic arthritis of the knee joint secondary to adjacent chronic osteomyelitis of the femur in an adult.

The present report describes a case of septic knee arthritis secondary to reactivated chronic osteomyelitis. The osteolytic lesion observed on the initial radiographs resulted in further imaging studies including CT and MRI, which confirmed the diagnosis. Based on the patient's history, physical findings and imaging studies, we performed open debridement rather than arthroscopic surgery in order to treat the infected intraarticular knee joint and ream the femur intramedullary canal. Additionally, an antibiotic-impregnated cement rod was inserted into the medullary cavity to fill the dead space and eradicate the infection. A high index of suspicion combined with adequate comprehension of initial plain radiographs is essential for accurate diagnosis of septic knee arthritis with adjacent chronic osteomyelitis.

Comparison of the reproducibility of panoramic radiographs between dentulous and edentulous patients.

PURPOSE: This study was performed to evaluate the reproducibility of panoramic radiographs of dentulous and edentulous patients. MATERIALS AND METHODS: The reproducibility of panoramic radiographs was evaluated using the panoramic radiographs acquired from 30 anterior dentulous patients by using a common biting positioning device (dentulous group) and 30 anterior edentulous patients by using chin-support devices to take a panoramic radiograph (edentulous group), respectively; these patients had undergone 3 or more panoramic radiographs. The widths and angles between the designated landmarks were measured on the panoramic radiographs, and the reproducibility was evaluated using the intraclass correlation coefficient (ICC) and the coefficient of variation. RESULTS: In the dentulous and edentulous groups, the ICCs of the mandibular ramus and mandibular angle areas were higher than the condylar head and zygomatic areas. The mandibular ramus and angle areas showed statistically lower mean coefficients of variation than the condylar head and zygomatic areas in the dentulous group. The mandibular angle area showed a significantly lower mean coefficient of variation than the zygomatic area in the edentulous group. By comparing the two groups, each ICC of the edentulous group was lower than that of the dentulous group, and the mean coefficients of variation of the mandibular ramus area, zygomatic area, left condylar inclination, and ramus ratio between the right and the left in the edentulous group were significantly higher than those in the dentulous group. CONCLUSION: Biting positioning for dentulous patients provided better positioning reproducibility than chin-support positioning when performing panoramic radiography for edentulous patients.

Rapid neurorrhaphy with titanium clips.

The purpose of this study was to evaluate the usefulness of titanium clips in the repair of transected peripheral nerves. The results of neurorrhaphy using titanium clips (VCS) were compared with the conventional technique of neurorrhaphy using nylon sutures. Transected sciatic nerves in 15 New Zealand white rabbits were repaired with VCS clips on one side and interrupted 9-0 nylon sutures on the other. The average time required for neurorrhaphy using the clip closure was 8.7 +/- 2.6 min, and this was shorter than the suture closure, which took 14.9 +/- 3.6 min (P < 0.01). Electromyographic studies revealed no significant differences in amplitudes of compound motor action potentials in both groups. Also, the number and extent of myelinizations of regenerated axons were not significantly different in both methods of nerorrhaphies. These results demonstrate that microscopic neurorrhaphy using titanium clips is a potential alternative to conventional neurorrhaphy using sutures.