Thermophilic Carboxylesterases from Hydrothermal Vents of the Volcanic Island of Ischia Active on Synthetic and Biobased Polymers and Mycotoxins.

Hydrothermal vents are geographically widespread and host microorganisms with robust enzymes useful in various industrial applications. We examined microbial communities and carboxylesterases of two terrestrial hydrothermal vents of the volcanic island of Ischia (Italy) predominantly composed of Firmicutes, Proteobacteria, and Bacteroidota. High-temperature enrichment cultures with the polyester plastics polyhydroxybutyrate and polylactic acid (PLA) resulted in an increase of Thermus and Geobacillus species and to some extent Fontimonas and Schleiferia species. The screening at 37 to 70°C of metagenomic fosmid libraries from above enrichment cultures identified three hydrolases (IS10, IS11, and IS12), all derived from yet-uncultured Chloroflexota and showing low sequence identity (33 to 56%) to characterized enzymes. Enzymes expressed in Escherichia coli exhibited maximal esterase activity at 70 to 90°C, with IS11 showing the highest thermostability (90% activity after 20-min incubation at 80°C). IS10 and IS12 were highly substrate promiscuous and hydrolyzed all 51 monoester substrates tested. Enzymes were active with PLA, polyethylene terephthalate model substrate, and mycotoxin T-2 (IS12). IS10 and IS12 had a classical α/ß-hydrolase core domain with a serine hydrolase catalytic triad (Ser155, His280, and Asp250) in their hydrophobic active sites. The crystal structure of IS11 resolved at 2.92 Å revealed the presence of a N-terminal ß-lactamase-like domain and C-terminal lipocalin domain. The catalytic cleft of IS11 included catalytic Ser68, Lys71, Tyr160, and Asn162, whereas the lipocalin domain enclosed the catalytic cleft like a lid and contributed to substrate binding. Our study identified novel thermotolerant carboxylesterases with a broad substrate range, including polyesters and mycotoxins, for potential applications in biotechnology. IMPORTANCE High-temperature-active microbial enzymes are important biocatalysts for many industrial applications, including recycling of synthetic and biobased polyesters increasingly used in textiles, fibers, coatings and adhesives. Here, we identified three novel thermotolerant carboxylesterases (IS10, IS11, and IS12) from high-temperature enrichment cultures from Ischia hydrothermal vents and incubated with biobased polymers. The identified metagenomic enzymes originated from uncultured Chloroflexota and showed low sequence similarity to known carboxylesterases. Active sites of IS10 and IS12 had the largest effective volumes among the characterized prokaryotic carboxylesterases and exhibited high substrate promiscuity, including hydrolysis of polyesters and mycotoxin T-2 (IS12). Though less promiscuous than IS10 and IS12, IS11 had a higher thermostability with a high temperature optimum (80 to 90°C) for activity and hydrolyzed polyesters, and its crystal structure revealed an unusual lipocalin domain likely involved in substrate binding. The polyesterase activity of these enzymes makes them attractive candidates for further optimization and potential application in plastics recycling.

Lytic Polysaccharide Monooxygenase from Talaromyces amestolkiae with an Enigmatic Linker-like Region: The Role of This Enzyme on Cellulose Saccharification.

The first lytic polysaccharide monooxygenase (LPMO) detected in the genome of the widespread ascomycete Talaromyces amestolkiae (TamAA9A) has been successfully expressed in Pichia pastoris and characterized. Molecular modeling of TamAA9A showed a structure similar to those from other AA9 LPMOs. Although fungal LPMOs belonging to the genera Penicillium or Talaromyces have not been analyzed in terms of regioselectivity, phylogenetic analyses suggested C1/C4 oxidation which was confirmed by HPAEC. To ascertain the function of a C-terminal linker-like region present in the wild-type sequence of the LPMO, two variants of the wild-type enzyme, one without this sequence and one with an additional C-terminal carbohydrate binding domain (CBM), were designed. The three enzymes (native, without linker and chimeric variant with a CBM) were purified in two chromatographic steps and were thermostable and active in the presence of H2O2. The transition midpoint temperature of the wild-type LPMO (Tm = 67.7 °C) and its variant with only the catalytic domain (Tm = 67.6 °C) showed the highest thermostability, whereas the presence of a CBM reduced it (Tm = 57.8 °C) and indicates an adverse effect on the enzyme structure. Besides, the potential of the different T. amestolkiae LPMO variants for their application in the saccharification of cellulosic and lignocellulosic materials was corroborated.

Micro-scale procedure for enzyme immobilization screening and operational stability assays.

OBJECTIVE: A simple and inexpensive methodology, based on the use of micro-centrifuge filter tubes, is proposed for establishing the best enzyme immobilization conditions. RESULTS: The immobilized biocatalyst is located inside the filter holder during the whole protocol, thus facilitating the incubations, filtrations and washings. This procedure minimizes the amount of enzyme and solid carrier needed, and allows exploring different immobilization parameters (pH, buffer concentration, enzyme/carrier ratio, incubation time, etc.) in a fast manner. The handling of immobilized enzymes using micro-centrifuge filter tubes can also be applied to assess the apparent activity of the biocatalysts, as well as their reuse in successive batch reaction cycles. The usefulness of the proposed methodology is shown by the determination of the optimum pH for the immobilization of an inulinase (Fructozyme L) on two anion-exchange polymethacrylate resins (Sepabeads EC-EA and Sepabeads EC-HA). CONCLUSION: The micro-scale procedure described here will help to overcome the lack of guidelines that usually govern the selection of an immobilization method, thus favouring the development of stable and robust immobilized enzymes that can withstand harsh operating conditions in industry.

Immobilization of dextransucrase from Leuconostoc mesenteroides NRRL B-512F on Eupergit C supports.

Dextransucrase from Leuconostoc mesenteroides B-512F was immobilized on epoxy-activated acrylic polymers with different textural properties (Eupergit C and Eupergit C 250L). Prior to immobilization, dextransucrase was treated with dextranase to remove the dextran layer covering the enzyme surface, thus increasing the accessibility of its reactive groups to the epoxide centers of the support. Elimination of 99% of the initial carbohydrate content was determined by the anthrone method. To prevent enzyme inactivation, the immobilization was carried out at pH 5.4, at which the coupling to the support took place through the carboxylic groups of the enzyme. The effects of the amount (mg) of dextransucrase added per gram of support (from 0.2:1 to 30:1), temperature and contact time were studied. Maximum activity recovery of 22% was achieved using Eupergit C 250L. Using this macroporous support, the maximum specific activity (710 U/g biocatalyst) was significantly higher than that obtained with the less porous Eupergit C (226 U/g biocatalyst). The dextransucrase immobilized on Eupergit C 250L showed similar optimal temperature (30 degrees C) and pH (5-6) compared with the native enzyme. In contrast, a notable stabilization effect at 30 degrees C was observed as a consequence of immobilization. After a fast partial inactivation, the dextransucrase immobilized on Eupergit C 250L maintained more than 40% of the initial activity over the following 2 days. The features of this immobilized system are very attractive for its application in batch and fixed-bed bioreactors.

Effect of carbohydrate fatty acid esters on Streptococcus sobrinus and glucosyltransferase activity.

Mutans streptococci are oral bacteria with a key role in the initiation of dental caries, because their glucosyltransferases synthesize polysaccharides from sucrose that allow them to colonize the tooth surface. Among the strategies to prevent dental caries that are being investigated are (1) the inhibition of bacterial growth of mutans streptococci or (2) the inhibition of glucosyltransferases involved in polysaccharide formation. Pure fatty acid esters of sucrose, maltose and maltotriose were synthesized by an enzyme-catalyzed process and tested as inhibitors of two glucosyltransferases of great homology, those from Streptococcus sobrinus and Leuconostoc mesenteroides NRRL B-512F. In spite of having their nonreducing end glucose blocked at 6-OH, they did not inhibit dextran synthesis. However, their effect on the growth of S. sobrinus in the solid and liquid phase was notable. 6-O-Lauroylsucrose, 6'-O-lauroylmaltose and 6"-O-lauroylmaltotriose at 100 microg/mL showed complete inhibition of S. sobrinus in agar plates. Consequently, these nontoxic derivatives are very promising for inclusion in oral-hygiene products aimed at disrupting plaque formation and preventing caries.

Production of bioethanol from carrot discards.

A revalorization of discarded carrots as substrate for the production of second-generation ethanol is proposed. In order to increase the fermentable sugar concentration of the musts two strategies were studied: Strategy 1 consisted in the enzymatic hydrolysis of bagasse must and Strategy 2 by which carrots were milled, dropped into distilled water and hydrolyzed with different enzymes prior to compressing and filtering to obtain carrot must. By applying Strategy 2 using 0.05% (v/v) of the enzyme Optimase CX255 at 70°C and pH 5.5 during 2.5h, the fermentable sugars extracted increased 3.5 times. In this way, the production of 77.5L of ethanol for each ton of discarded carrots was achieved. This process yielded bagasse as byproduct, which could be used for animal feed.

Production of Galacto-oligosaccharides by the ß-Galactosidase from Kluyveromyces lactis : comparative analysis of permeabilized cells versus soluble enzyme.

The transgalactosylation activity of Kluyveromyces lactis cells was studied in detail. Cells were permeabilized with ethanol and further lyophilized to facilitate the transit of substrates and products. The resulting biocatalyst was assayed for the synthesis of galacto-oligosaccharides (GOS) and compared with two soluble ß-galactosidases from K. lactis (Lactozym 3000 L HP G and Maxilact LGX 5000). Using 400 g/L lactose, the maximum GOS yield, measured by HPAEC-PAD analysis, was 177 g/L (44% w/w of total carbohydrates). The major products synthesized were the disaccharides 6-galactobiose [Gal-ß(1→6)-Gal] and allolactose [Gal-ß(1→6)-Glc], as well as the trisaccharide 6-galactosyl-lactose [Gal-ß(1→6)-Gal-ß(1→4)-Glc], which was characterized by MS and 2D NMR. Structural characterization of another synthesized disaccharide, Gal-ß(1→3)-Glc, was carried out. GOS yield obtained with soluble ß-galactosidases was slightly lower (160 g/L for Lactozym 3000 L HP G and 154 g/L for Maxilact LGX 5000); however, the typical profile with a maximum GOS concentration followed by partial hydrolysis of the newly formed oligosaccharides was not observed with the soluble enzymes. Results were correlated with the higher stability of ß-galactosidase when permeabilized whole cells were used.