The effect of saliva composition on texture perception of semi-solids.

Saliva is expected to be of significance for the perception of food stimuli in the mouth. Mixing the food with saliva, including breakdown and dilution, is considered to be of large importance for semi-solids as these products are masticated without chewing. It is known that there are large variations in composition of saliva originating from different glands and different subjects. In this study we investigated how variations in salivary characteristics affect sensory perception. Eighteen trained subjects participated in the study. Saliva was collected at rest and during three types of stimulation (odour, parafilm chewing and citric acid), and flow rates were determined. The collected saliva was analyzed for protein concentration, buffer capacity, mucin level and alpha-amylase activity. The salivary components measured in this study varied considerably among subjects, but also within subjects as a result of different means of stimulation. Variations in salivary components were correlated with sensory perception of a number of flavour, mouth feel and after feel attributes in the semi-solids mayonnaise and custard dessert. Total protein concentration and alpha-amylase activity were observed to correlate most strongly with texture perception.

Oral processing assessed by M-mode ultrasound imaging varies with food attribute.

Ultrasonic imaging was used to quantify oral movements made during the oral processing of foods while subjects assessed the intensity of the sensory attributes, thick, creamy, sweet and bitter. A series of four stimuli were prepared with high and low viscosities and high and low sweetness. Over five sessions, subjects (N=8) were asked to consume 5 ml spoonfuls of each of the stimuli while holding an ultrasound probe beneath their chin so as to produce a mid-line sagital image of the floor of the mouth and tongue. In the first session, subjects were asked to swallow the sample. In subsequent sessions, subjects were asked to rate one of the attributes, thickness, sweetness, creaminess or bitterness, in random order. The resulting video recordings were subjected to an image-processing algorithm to quantify the amount of intra-oral manipulation performed. The results demonstrated that oral movements varied with attribute, especially in the period during which the bulk of the food is typically processed and the following swallowing phase. The food's sweetness affected oral movements especially during the bulk phase, whereas the food's viscosity primarily affected movements during the following swallowing and clearance phases.

Relating particles and texture perception.

Practically all foods contain particles. It has been suggested that the presence of particles in food may affect the perception of sensory attributes. In the present study we investigated the effect of size and type (hardness and shape) of particles added to a CMC based vanilla custard dessert. The two types of particles included in the study were silica dioxide and polystyrene spheres, varying in size from 2 to 230 microm. Eighteen trained adults participated in the study. They rated the sensation of 17 sensory flavour and texture attributes on a 100-point visual analogue scale (VAS). The results indicate that the addition of particles increased the sensation of roughness attributes and decreased the ratings of a number of presumably favorable texture attributes (smoothness, creamy, fatty and slippery) significantly. These effects increased with increasing particle size up to 80 microm. Roughness ratings deceased for larger particles sizes. Surprisingly, even particles of 2 microm had significant effects: they increased perceived rough lip-tooth feel, and decreased slippery lip-tooth feel and smoothness of the product. The affected attributes had previously been related to lubricative properties of foods. Particles added to semi-solid foods with relatively low levels of fat seem to counteract the lubricating effects of the fat resulting in increased oral friction. In a separate study on size perception the silica dioxide particles were used. By sampling the stimuli between the tongue and palate, subjects rated the size of the particles on a 100-point scale in comparison to anchor stimuli containing no particles and particles of 250 microm. The perceived particle size significantly increased for larger particles. Furthermore, perceived particle size was negatively correlated with roughness ratings. Thus, subjects who were sensitive and perceived the particles as being relatively large reported the same stimuli to have less rough after-feel. In conclusion, particles added to a product induce large effects on texture sensations, and texture sensation is related to individual size perception.

The role of alpha-amylase in the perception of oral texture and flavour in custards.

The role of salivary alpha-amylase in odour, flavour, and oral texture sensations was investigated in two studies in which the activity of salivary amylase present in the mouth of human subjects was either increased by presenting custards with added alpha-amylase or decreased by presenting custards with added acarbose, an amylase inhibitor. For starch-based vanilla custard desserts, amylase resulted in increased melting and decreased thickness sensations, whereas acarbose had the opposite effect, i.e., decreased melting and increased thickness. Other affected attributes included creamy mouth feel, creamy after feel, and fatty after feel. Creaminess, which is considered to be a highly desirable food quality, decreased by as much as 25% with added amylase and increased by as much as 59% with added acarbose. Neither additional amylase nor acarbose affected sensations for a nonstarch-based carboxy methylcellulose (CMC) vanilla custard dessert. This indicates that the effects of amylase on viscosity-related sensations of starch-based custards, such as perceived melting and thickness, are caused by amylase-induced breakdown of starch. Partial Least Square (PLS) analysis indicated that the effects of amylase and acarbose on perceived creaminess are not only driven by their effects on perceived melting and thickness, but also by their effects on perceived flavour.

A comparison of the effects of added saliva, alpha-amylase and water on texture perception in semisolids.

The effect of adding saliva or a saliva-related fluid (alpha-amylase solution and water) to custard prior to ingestion on the sensory ratings of odour, flavour and lip-tooth-, mouth- and after-feel sensations was investigated. Saliva had previously been collected from the subjects and each subject received his/her own saliva. Sixteen subjects from a trained panel assessed 17 flavour and texture attributes of soy- and milk-based custard desserts. Immediately prior to administration, two different volumes (0.25 and 0.5 ml) of three different saliva-related fluids (saliva, alpha-amylase solution and water) were added to the product. The added volumes represented an approximately 33% and 66% increase of the volume of saliva present in the mouth during ingestion. The results show that addition of a fluid affected the mouth-feel attributes of melting, thickness and creamy. Melting was the only attribute on which the type of fluid had an effect, where saliva elicited a stronger melting effect than the alpha-amylase solution and water. The volume of the added fluid affected a number of attributes (thick and creamy mouth-feel and fatty after-feel). It can be concluded that in general the sensory attributes of semisolids were relatively stable. Mouth- and after-feel sensations were partly affected, while odour, flavour and lip-tooth-feel sensations were not affected by an increase in volume of saliva or other saliva-related fluid during ingestion.

Clinical criteria used to detect primary root caries with electrical and mechanical measurements in vitro.

PURPOSE: To relate the Electrical Caries Monitor (ECM) and Resilience Caries Monitor (RCM) readings with clinical criteria used to define primary root carious lesions (PRCLs) in vitro. METHODS: PRCLs were classified according to color, texture, hardness, cavitation, size and severity before ECM and RCM readings were recorded. RESULTS: There was a poor but significant correlation between the ECM and RCM phase readings (P < 0.05). ECM readings for color, all five classes of severity and all three classes of hardness of lesions were significantly different from each other and from sound root tissue (P < 0.05). There was a significant correlation for ECM readings and cavitation (P < 0.05). There was a clear logarithmic relationship between ECM end values and size (P < 0.05). RCM amplitude measurements for hardness and all five classes of severity were significantly different from each other and from sound root tissue (P < 0.05). However, the RCM readings failed to correlate with color, cavitation or size (P > 0.05). In conclusion, the relationship between ECM and RCM data and some clinical detection criteria for PRCLs is promising and warrants further investigation in vitro and in vivo. CLINICAL SIGNIFICANCE: The ECM is capable of distinguishing the severity of PRCLs since it is a less invasive but accurate method of detecting carious lesions when compared to tactile methods. The RCM was able to differentiate sound root dentine from soft lesions in vitro but this device is currently in a very early stage of development, and many mechanical and electronic problems must be solved prior to application of the device in clinical practice.

Oral movements and the perception of semi-solid foods.

Here we review the role of oral movements in the perception of food attributes, particularly for semi-solid and liquid foods ingested almost in ready-to-swallow form. An overview of a series of instrumental and sensory studies suggests clear links between the type of sensation and the time point of processing in the mouth. Some commonly-reported sensations, such as thickness, are relatively immediate and reflect the bulk properties of food bolus when the food is relatively intact. Others, such as fattiness and melting, reflect both bulk and surface properties and follow considerable oral processing when the food is relatively degraded. Yet others, such as fatty after-feel, are only fully developed after swallowing is complete. In addition, oral processing also plays an important role in the generation of aroma and taste sensations. Most of these in prior vivo studies have now been confirmed by in vitro work using a modified rheometer, dubbed the Structure Breakdown Cell (SBC), wherein the mechanical and enzymatic break-down of food can be monitored directly and related to sensory profiles generated by trained panelists.

The role of intra-oral manipulation in the perception of sensory attributes.

To gain insight into the effect of oral processes on perception, we defined a set of five specific oral manipulations and investigated their effects on the perception of low and high fat versions of two semi-solid foodstuffs, vanilla custard desserts and mayonnaises. Behavior modifications ranged from simply placing the stimulus on the tip of the tongue to vigorously moving it around in the mouth. Sensory ratings for mouth-feel and flavor attributes were made 5s after placing the stimulus in the mouth, and after-feel attributes were rated immediately after swallowing. Most attributes showed a similar pattern, with lowest attribute ratings where the tongue's movement was restricted and gradually increasing ratings with increasing complexity of the tongue movements. An individual's normal oral processing behavior typically resulted in the most intense sensations of flavor and mouth-feel. Residence time for all mouth-feel attributes, except prickling, was determined by the time required for tongue movements. The exact tongue movements required for sensations appeared to be related to food groups and individual foods, rather than to specific mouth-feel attributes.

The effect of oral temperature on the temperature perception of liquids and semisolids in the mouth.

This work examined the influence of oral temperature on oral perception of temperature in liquids and semisolids. A panel of 20 adults assessed the temperature of water, custard dessert and mayonnaise. Oral temperatures were manipulated by 5-s mouth rinses of 10, 35 and 55 degrees C performed prior to assessments, which resulted in oral temperatures of 27, 35 and 43 degrees C, respectively. The products were evaluated at 10, 22 and 35 degrees C. Results show that subjects were able to differentiate between the product temperatures. A large effect of type of product was seen on perceived temperature, where water was, overall, perceived as significantly colder than custard dessert and mayonnaise. The range of perceived thermal ratings was widest for custard dessert, followed by water and mayonnaise. This might be due to differences in composition and structure of the products. Even though oral temperature was varied considerably in the present study, this did not exert large effects on perceived temperature.

The effect of oral and product temperature on the perception of flavor and texture attributes of semi-solids.

This study examined the effect of oral and product temperature on the perception of texture and flavor attributes. A trained panel assessed 21 texture and flavor attributes in one high-fat and one low-fat product of two semi-solids: custard dessert and mayonnaise. The products were evaluated at 10, 22 or 35 degrees C in combination with oral temperatures of 27, 35 and 43 degrees C. Results showed that modulation of product and oral temperature had significant effects on a number of attributes. Flavor intensities, melting mouth feel, and fat after feel increased, while subjective thickness decreased with increasing product temperature. Neither product- nor oral temperature had an effect on over-all creaminess. Oral temperature affected a number of mouth feel attributes: melting, heterogeneous and smooth. Furthermore, large differences existed in ratings between the high- and low-fat products of custard and mayonnaise, and they were more prominent in mayonnaise. We conclude that the effect of oral temperature on the perception of sensory attributes in semi-solids was small, but present, while the product temperatures influenced the ratings greatly.