Microplastics in the Bronchoalveolar Lavage Fluid of Chinese Children: Associations with Age, City Development, and Disease Features.

This study characterized the occurrence patterns of microplastics (MPs) in the bronchoalveolar lavage fluid (BALF) of children with pulmonary diseases. MPs were detected in 89.6% of BALF samples with an average of 4.31 ± 2.77 items/10 mL, supporting the hypothesis that inhalation is a significant pathway of airborne MP exposure to pediatric lungs. Inhaled MPs were predominantly composed of 10 polymer types [e.g., polypropylene (41.9%), polyethylene (19.4%), and polyester (13.6%)], with the majority being smaller than 20 µm. MP levels in BALF exhibited a negative correlation with children's age, probably owing to the preferential crawling and tumbling actions in indoor environments and underdeveloped immune systems of young children. Participants living in urban areas suffered from higher pulmonary MP exposure, likely due to higher environmental levels, compared with suburban/rural residents (P < 0.05). Although no significant differences were found between MP levels in pediatric lungs with community-acquired pneumonia (CAP) and asthma (P > 0.05), the severe CAP group displayed significantly higher MP contamination than the nonsevere group (P < 0.05), indicating that some yet undiscovered relationship(s) between inhaled MPs and pediatric pulmonary diseases may exist.

Specific capture and determination of glycoprotein using a hybrid epitopes and monomers-mediated molecular-imprinted polymer enzyme-free electrochemical biosensor.

A novel molecular-imprinted polymer (MIP)-based enzyme-free biosensor was created for the selective detection of glycoprotein transferrin (Trf). For this purpose, MIP-based biosensor for Trf was prepared by electrochemical co-polymerization of novel hybrid monomers 3-aminophenylboronic acid (M-APBA) and pyrrole on a glassy carbon electrode (GCE) modified with carboxylated multi-walled carbon nanotubes (cMWCNTs). Hybrid epitopes of Trf (C-terminal fragment and glycan) have been selected as templates. The produced sensor exhibited great selective recognition ability toward Trf under optimal preparation conditions, offering good analytical range (0.125-1.25 µM) with a detection limit of 0.024 µM. The proposed hybrid epitope in combination with hybrid monomer-mediated imprinting strategy was successfully applied to detect Trf in spiked human serum samples, with recoveries and relative standard deviations ranging from 94.7 to 106.0% and 2.64 to 5.32%, respectively. This study provided a reliable protocol for preparing hybrid epitopes and monomers-mediated MIP for the synergistic and effective determination of glycoprotein in complicated biological samples.

Aspirin/PLGA coated 3D-printed Ti-6Al-4V alloy modulate macrophage polarization to enhance osteoblast differentiation and osseointegration.

Although titanium (Ti) and Ti-based alloy have been widely used as dental and orthopedic implant materials, its bioinertness hindered the rapid osseointegration. Therefore, it is recommended to acquire ideal topographic and chemical characteristics through surface modification methods. 3D printing is a delicate manufacture technique which possesses superior controllability and reproducibility. While aspirin serve as a well-established non-steroidal anti-inflammatory agent. Recently, the importance of immune system in regulating bone dynamics has attracted increasing attention. We herein superimposed the aspirin/poly (lactic-co-glycolic acid) (ASP/PLGA) coating on the 3D-printed Ti-6Al-4V surface with uniform micro-structure to establish the Ti64-M-ASP/PLGA substrate. Scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and contact angle test confirmed the successful fabrication of the Ti64-M-ASP/PLGA substrate, with increased wettability and sustained release pattern of ASP. Compared with the Ti64 base material, the Ti64-M-ASP/PLGA substrate showed enhanced M2 and depressed M1 genes and proteins expressions in macrophages. The novel Ti64-M-ASP/PLGA substrate also displayed enhanced osteoblast proliferation, adhesion, extracellular mineralization ability and osteogenic gene expressions when cultured with macrophage conditioned medium in vitro. Furthermore, rat femora implantation model was used for in vivo evaluation. After 4 weeks of implantation, push out test, micro-computed tomography (micro-CT) and histological analyses all confirmed the superior osseointegration capabilities of the Ti64-M-ASP/PLGA implant than the other groups. Our study revealed the synergistic role played by 3D-printed micro topography and immunoregulatory drug aspirin in promoting osteogenesis in vitro and accelerating osseointegration in vivo, thus providing a promising method for better modifying the implant surface. Graphical abstract.

Rapid measurements of curcumin from complex samples coupled with magnetic biocompatibility molecularly imprinted polymer using electrochemical detection.

Curcumin widely exists in food, and rapid selective and accurate detection of curcumin have great significance in chemical industry. In this experiment, a new magnetic biocompatibility molecularly imprinted polymer was prepared with nontoxic and biocompatible Zein to adsorb curcumin selectively. The polymer has high biocompatibility, good adsorption capacity, and specific adsorption for curcumin. Combined with portable electrochemical workstations, the polymer can be used to detect curcumin rapidly and cost-effectively. Using curcumin as a template and Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe3 O4 particles for solid phase extraction. The experimental results showed that the polymer reached large adsorption capacity (32.12 mg/g) with fast kinetics (20 min). The adsorption characteristic of the polymer followed the Langmuir isotherm and pseudo-second-order kinetic models. Hexacyanoferrate was used as electrochemical probe to generate signals, and the linear range was 5-200 µg/mL for measuring curcumin. The experimental analysis showed that the polymer was an ideal material for selective accumulation of curcumin from complex samples. This approach has been successfully applied to the determination of curcumin in food samples with electrochemical detection, indicating that this is a feasible and practical technique.

Ultrathin NiCo2O4 nanowalls supported on a 3D nanoporous gold coated needle for non-enzymatic amperometric sensing of glucose.

A disposable needle-type of hybrid electrode was prepared from a core of stainless steel needle whose surface was modified with a 3D nanoporous gold/NiCo2O4 nanowall hybrid structure for electrochemical non-enzymatic glucose detection. This hybrid electrode, best operated at 0.45 V (vs. SCE) in solutions of pH 13 has a linear response in the 0.01 to 21 mM glucose concentration range, a response time of <1 s, and a 1 µM detection limit (at an S/N ratio of 3). The remarkable enhancement compared to the solid gold/NiCo2O4 and stainless steel/NiCo2O4 hybrid electrodes in electrochemical performance is assumed to originate from the good electrical conductivity and large surface area of the hybrid electrode, which enhance the transport of mass and charge during electrochemical reactions. This biosensor was also applied to real sample analysis with little interferences. The electrode is disposable and considered to be a promising tool for non-enzymatic sensing of glucose in a variety of practical situations. Graphical abstract Ultrathin NiCo2O4 nanowalls supported on nanoporous gold that is coated on a stainless steel needle was fabricated for sensitive non-enzymatic amperometric sensing of glucose.

Evaluation of Sialendoscopy-Assisted Treatment of Submandibular Gland Stones.

PURPOSE: The aim of the present study was to evaluate the therapeutic efficiency of sialendoscopy-assisted operations in the treatment of submandibular gland stones. MATERIALS AND METHODS: The data from 8 patients with sialolithiasis who underwent sialendoscopy from August 2015 to January 2016 at the Department of Oral and Maxillofacial Surgery, School of Stomatology, China Medical University (Shenyang, China) were retrospectively reviewed. All the patients had undergone preoperative technetium-99m pertechnetate salivary gland scintigraphy. The results revealed that the salivary glands exhibited normal or slightly reduced uptake and excretion dysfunction. Computed tomography examinations revealed stones located in the intraductal area near the glands or in the branches that could not be removed owing to their deep locations within the mouth. Therefore, an endoscope was inserted, the stones were located intraductally using sialendoscopy, and a transcervical incision was made to remove the stones and preserve the submandibular gland. RESULTS: The stones were completely removed, and the submandibular gland was preserved in all cases. The patients recovered well postoperatively, and no complications developed. CONCLUSIONS: Our results suggest that sialendoscopy-assisted sialolithectomy is an effective and safe surgical technique for the removal of proximal and intraglandular submandibular gland stones. The patients' quality of life had obviously improved postoperatively.

Physical, rheological and microscopic properties of AAT nanomaterial/crumb rubber powder composite-modified asphalt and SBS-modified asphalt.

This research was based on a nano-AAT (American Advanced Technology)-modified asphalt to which CRP (crumb rubber powder), a rubber waste, was introduced to explore the influence of CRP on AAT performance. The changes in the performance of AAT-modified asphalt after the addition of CRP were analyzed. The rubber powder with the raw material of waste tire was added to the asphalt instead of SBS modifier. While achieving waste recycling, the asphalt material has good performance. Physical analysis methods, rheological performance tests, rolling thin-film oven tests and Fourier transform infrared spectroscopy tests were used to investigate the performance of the composite-modified asphalt. The rheological properties of the composite-modified asphalt were analyzed by means of DSR, BBR and MSCR tests, and the microscopic mechanism of the modified asphalt was investigated by means of FTIR tests. The optimal nano-AAT-composite-modified formulation A3C3 (AAT-3.5%SBS-3%CRP) was selected by evaluating the overall performance. Additionally, the performances of the AAT/CRP-composite-modified asphalt and SBS-modified asphalt were compared using physical indicators, the rutting factor, creep flexibility and the stiffness modulus. The results show that the A3C3-modified asphalt had better stiffness, high-temperature (HT) performance and aging resistance than the SBS-modified asphalt, but it was less effective at low temperatures (LTs). According to FTIR, the absorption curves of A3C3 and SBS are essentially equal, with A3C3 only having a variation at 1104 cm-1.

Mechanically robust and personalized silk fibroin-magnesium composite scaffolds with water-responsive shape-memory for irregular bone regeneration.

The regeneration of critical-size bone defects, especially those with irregular shapes, remains a clinical challenge. Various biomaterials have been developed to enhance bone regeneration, but the limitations on the shape-adaptive capacity, the complexity of clinical operation, and the unsatisfied osteogenic bioactivity have greatly restricted their clinical application. In this work, we construct a mechanically robust, tailorable and water-responsive shape-memory silk fibroin/magnesium (SF/MgO) composite scaffold, which is able to quickly match irregular defects by simple trimming, thus leading to good interface integration. We demonstrate that the SF/MgO scaffold exhibits excellent mechanical stability and structure retention during the degradative process with the potential for supporting ability in defective areas. This scaffold further promotes the proliferation, adhesion and migration of osteoblasts and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro. With suitable MgO content, the scaffold exhibits good histocompatibility, low foreign-body reactions (FBRs), significant ectopic mineralisation and angiogenesis. Skull defect experiments on male rats demonstrate that the cell-free SF/MgO scaffold markedly enhances bone regeneration of cranial defects. Taken together, the mechanically robust, personalised and bioactive scaffold with water-responsive shape-memory may be a promising biomaterial for clinical-size and irregular bone defect regeneration.

Using Quercetin to Construct Molecularly Imprinting Polymer in the Preparation and Enrichment of Flavonol and Flavonoid Compounds.

Flavonol and flavonoid compounds are important natural compounds with various biomedical activities. Therefore, it is of great significance to develop a strategy for the specific extraction of flavonol and flavonoid compounds. Quercetin is a well-studied flavonoid possessing many health benefits. This compound is a versatile antioxidant known to possess protective abilities against body tissue injury induced by pathological situations and various drug toxicities. Although quercetin is widely distributed in many plants, its content generally is not very high. Therefore, the specific extraction of quercetin as well as other flavonol and flavonoid compounds has profound significance. In this work, the quercetin molecularly imprinting polymer (QMIP) was successfully prepared, in which a typical flavonol quercetin was selected as the template molecule. QMIP was synthesized by performing the surface molecular imprinting technology on the surface of NH2-MIL-101(Fe). Our study results showed that QMIP exhibited quick binding kinetic behavior, a high adsorption capacity (57.04[Formula: see text]mg/g), and the specific recognition ability toward quercetin compared with structurally distinct compounds (selective [Formula: see text]). The specific adsorption ability of quercetin by QMIP was further explained using computation simulation that molecules with non-planar 3D conformations hardly entered the molecularly imprinted cavities on QMIP. Finally, QMIP was successfully used for the specific extraction of quercetin and five other flavonol and flavonoid compounds in the crude extracts from Sapium sebiferum. This study proposes a new strategy to synthesize the molecularly imprinted polymer based on a single template for enriching and loading a certain class of active ingredients with similar core structures from variable botanicals.

Constructing electrochemical sensor using molecular-imprinted polysaccharide for rapid identification and determination of l-tryptophan in diet.

An imbalance of l-tryptophan (l-Trp), a basic component of a healthy diet, is harmful to human health. Traditional methods for detecting l-Trp have many limitations. To correct a deficiency or excess of l-Trp in human diets, it is necessary to develop a novel method that is rapid, low-cost, and high-sensitivity. Herein, a molecularly imprinted polysaccharide electrochemical sensor termed MIP/CS/MWCNTs/GCE (molecularly imprinted polymer/chitosan/multiwalled carbon nanotubes/glassy carbon electrode) targeting l-Trp was first constructed on a glassy carbon electrode, which was modified with multiwalled carbon nanotubes and chitosan using bifunctional monomers. The MIP/CS/MWCNTs/GCE obtained a wide linear range (1-300 µM) for detecting l-Trp and accurately detected the proportion of l-Trp in mixtures of Trp enantiomers. In milk samples, the spiked recoveries of l-Trp were 86.50 to 99.65%. The MIP/CS/MWCNTs/GCE electrochemical sensor possessed good recognition and detection performance for l-Trp and has promising potential for practical application.

Synergistic recognition of transferrin by using performance dual epitope imprinted polymers.

Transferrin (Trf) is a new type of active drug targeting carrier and disease biomarker that regulates the balance of iron ions in human body. The recognition and isolation of Trf is of great significance for disease diagnosis and treatment. Thus, a new type of magnetic dual affinity epitope molecularly imprinted polymer coated on Fe3O4 nanoparticles (Fe3O4@DEMIP) was successfully prepared for specific recognition of Trf. C-terminal nonapeptide and Trf glycan were selected as bi-epitope templates for metal chelation and boron affinity immobilization, respectively. 4-vinylphenylboric acid (4-VP), N-isopropyl acrylamide (NIPAM) and zinc acrylic were used as functional monomers. Results showed that Fe3O4@DEMIP exhibited excellent specific recognition ability adsorption capacity toward Trf, with an adsorption of 43.96 mg g-1 (RSD = 3.28%) and a more satisfactory imprinting factor (about 6.60) than that of other reported imprinting methods. In addition, Fe3O4@DEMIP displayed pH, temperature and magnetic sensitivity properties to realize temperature and pH-controlled recognition and release of target proteins and magnetic rapid separation. Furthermore, the Fe3O4@DEMIP coupled with high-performance liquid chromatography (HPLC) analysis was successfully used for specific recognition of Trf in biosamples. This study provides a reliable protocol for preparing metal chelation and boron affinity dual affinity bi-epitope molecularly imprinted polymers for synergistic and efficient recognition of biomacromolecules in the complex biological systems.

Selective separation and inexpensive purification of paclitaxel based on molecularly imprinted polymers modified with ternary deep eutectic solvents.

Paclitaxel (PTX) is a powerful anticancer natural product, with its separation and purification having been widely studied. In this work, new molecular imprinted polymers (MIPs) using deep eutectic solvents (DESs) with different molar ratios were prepared as functional monomers. These were then used as adsorbents in solid phase extraction (SPE) for the separation of PTX from its structural analogs. The polymers were characterized by energy disperive X-rays (EDX), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and fourier transform infrared spectroscopy (FT-IR). The results suggested that the formative regular DES-MIPs had an even pore-size distribution and a large specific surface area. The dynamic adsorption and static adsorption showed that the DES-MIPs had excellent adsorption performance, with a maximum adsorption capacity and optimum adsorption time of 87.08 mg/g and 180 min, respectively. The selective adsorption experiments showed that the material had outstanding selectivity, and the maximum selectivity factor was 6.20. For stability, after six consecutive adsorption and desorption cycles, the DES-MIPs maintained the perfect stability and reusability. Furthermore, the fabricated SPE column was successfully utilized for extracting and eluting PTX. This study provides a reliable protocol for the separation and purification PTX from its structural analogs and the DES-MIPs materials have excellent potential application value in pharmaceutical industry.

Extraction of activated epimedium glycosides in vivo and in vitro by using bifunctional-monomer chitosan magnetic molecularly imprinted polymers and identification by UPLC-Q-TOF-MS.

In this work, efficient, sensitive bifunctional-monomer chitosan magnetic molecularly imprinted polymers (BCMMIPs) were fabricated and successfully applied to concentrate the metabolites of Epimedium flavonoids in rat testis and bone that were later analyzed using UPLC-Q-TOF-MS. Using chitosan and methacrylic acid as co-functional monomers, BCMMIPs exhibited a large adsorption capacity (7.60 mg/g), fast kinetics (60 min), and good selectivity. Chitosan is bio-compatible and non-toxic, and methacrylic acid provides multiple hydrogen bond donors. The BCMMIPs were injected into rat testis to specifically enrich the total flavonoid metabolites in vivo and were used to extract metabolites from bone in vitro. The results showed that the BCMMIPs coupled with UPLC-Q-TOF-MS successfully identified 28 compounds from testis and 18 compounds from bone, including 19 new compounds. This study provided a reliable protocol for the concentration of metabolites from complex biological samples, and several new metabolites of Epimedium flavonoids were found in vivo and in vitro.

Simultaneous extraction of several targets by using non-toxic dual template molecularly imprinted polymers in vivo and in vitro.

In this report, a non-toxic Dual Template Molecularly Imprinted Polymers (DMIPs) was synthesized with quercetin and schisandrin b as template molecules, using deep-eutectic solvents as functional monomers for the first time. The DMIPs were used to efficiently and simultaneously enrich quercetin and schisandrin b from the mixed crude extracts of penthorum and schisandra. The results indicated that the DMIPs exhibited rapid adsorption kinetics (80 min for adsorption equilibrium) and high selectivity. The largest adsorbing capacities to quercetin and schisandrin b were 23.58 mg/g and 41.64 mg/g, respectively. After presaturation with quercetin and schisandrin b, the nontoxic saturated DMIPs were fed to the mice. Blood samples of the mice were taken and both quercetin and schisandrin b were successfully detected. The pharmacokinetics of quercetin and schisandrin b were similar to reports in the literature where mice were directly fed with botanicals. Our study provides a reliable protocol such that DMIPs can be used to separate and enrich several target molecules simultaneously from complex biological systems. Our findings suggested that the DMIPs have potential application as a drug delivery system of compound herbal formulas.

Specific adsorption of tetracycline from milk by using biocompatible magnetic molecular imprinting material and evaluation by ECD.

Biocompatible magnetic molecularly imprinted polymers (BMMIPs) were prepared with Zein for the first time, and were used to enrich tetracycline compounds selectively. Innovative combination of BMMIPs and electrochemistry to obtain lower detection line to satisfy industrial detection demands. Using Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe3O4 particles. The scanning electron microscope, transmission electron microscope and X-ray diffraction technologies were used to characterize BMMIPs. Through optimization, BMMIPs attained large adsorption capacity (236.40 mg/g) with fast kinetics (40 min) and followed the Langmuir isotherm and pseudo-second-order kinetic models. BMMIPs had good recognition ability, the selective factors of oxytetracycline, chlortetracycline, doxycycline were 4.78, 4.23, and 3.39, respectively. Excellent linearity was attained in the range of 0.025-500 µg/mL, with low detection limits and low quantitation limits of 0.025 and 0.083 µg/mL. According to our exploring, BMMIPs was ideal materials for enrichment of tetracycline in complex biological samples.

Galenic dural arteriovenous fistula in neurofibromatosis type 1 treated with Onyx.

Galenic dural arteriovenous fistula (GDAVF) represents a unique, hard-to-treat subgroup of tentorial dural arteriovenous fistulae. Neurofibromatosis type 1 (NF1) has been infrequently associated with different cerebrovascular conditions that may lead to either ischemic or haemorrhagic stroke. Intracranial GDAVF has not been described in NF1 patients. We present an unusual case of GDAVF in a 37-year-old man with NF1. The fistula drained directly to the vein of Galen through multiple feeders. Complete occlusion of the fistula was achieved through trans-arterial embolisation with Onyx (ethylene vinyl alcohol copolymer) in a single treatment session. Deep venous drainage remained intact, and the patient recovered well. To our knowledge, this is the first report on complete closure of GDAVF with NF1 using trans-arterial embolisation. The preservation of functioning of the straight sinus may have contributed to the success of treatment.

Near-Complete Genome Sequences of 12 Coxsackievirus Group A Strains from Hand, Foot, and Mouth Disease and Herpangina Cases with Different Clinical Symptoms.

Coxsackievirus group A (CV-A) strains are important pathogens of hand, foot, and mouth disease and herpangina. We report here the near-complete genome sequences of 12 CV-A strains isolated from infants and children with different clinical diseases. The presented data will be very useful for future genome-based epidemiological studies.

Impact of anti-acidification microbial consortium on carbohydrate metabolism of key microbes during food waste composting.

This study investigated the effect of anti-acidification microbial consortium (AAMC), which act synergistically for rapid bioconversion of organic acids on carbohydrate metabolism of key microbes in the course of food waste (FW) composting by metaproteomics. AAMC was inoculated to the composting mass and compared with treatment with alkaline compounds and the control without any amendment. Inoculating AAMC could effectively accelerate carbohydrate degradation process and improve composting efficiency. Carbohydrate metabolic network profiles showed the inoculation with AAMC could increase significantly the types of enzymes catalysing the degradation of lignin, cellulose and hemicellulose. Furthermore, AAMC inoculum could increase not only diversities of microbes producing key enzymes in metabolism pathways of acetic and propionic acids, but also the amounts of these key enzymes. The increase of diversities of microbes could disperse the pressure from acidic adversity on microorganisms which were capable to degrade acetic and propionic acids.

Polydopamine-Coated Magnetic Molecularly Imprinted Polymers with Fragment Template for Identification of Pulsatilla Saponin Metabolites in Rat Feces with UPLC-Q-TOF-MS.

In this work, a modified pretreatment method using magnetic molecularly imprinted polymers (MMIPs) was successfully applied to study the metabolites of an important botanical with ultraperformance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS). The MMIPs for glucoside-specific adsorption was used to identify metabolites of Pulsatilla chinensis in rat feces. Polymers were prepared by using Fe3O4 nanoparticles as the supporting matrix, d-glucose as fragment template, and dopamine as the functional monomer and cross-linker. Results showed that MMIPs exhibited excellent extraction performance, large adsorption capacity (5.65 mg/g), fast kinetics (60 min), and magnetic separation. Furthermore, the MMIPs coupled with UPLC-Q-TOF-MS were successfully utilized for the identification of 17 compounds including 15 metabolites from the Pulsatilla saponin metabolic pool. This study provides a reliable protocol for the separation and identification of saponin metabolites in a complex biological sample, including those from herbal medicines.

Advantages of submandibular gland preservation surgery over submandibular gland resection for proximal submandibular stones.

OBJECTIVES: This study sought to compare surgical outcomes after the removal of submandibular gland (SMG) stones via 2 different surgical methods. MATERIALS AND METHODS: From June 2015 to July 2016, a total of 40 patients with SMG stones were selected from the Department of Oral and Maxillofacial Surgery, School of Stomatology, China Medical University (Shenyang, China), and were randomly assigned to 2 groups. Twenty patients underwent sialendoscopy-assisted stone removal via extraoral incision with preservation of the SMG, and 20 patients underwent traditional SMG resection. The outcomes of the 2 surgical procedures were assessed. RESULTS: The operation time and hospital stay were shorter in the SMG preservation group than the SMG resection group. There were no significant differences in stone size or location between the groups. The mean visual analog scale (VAS) score was lower in the SMG preservation group than the SMG resection group. All patients in the SMG resection group exhibited varying degrees of scarring and concave deformity on the face and neck, whereas all patients in the SMG preservation group retained intact facial morphology. CONCLUSIONS: Sialendoscopy-assisted stone removal with preservation of the SMG exhibited many advantages relative to traditional SMG resection.