RESUMEN
Biological systems employ non-equilibrium self-assembly to create ordered nanoarchitectures with sophisticated functions. However, it is challenging to construct artificial non-equilibrium nanoassemblies due to lack of control over assembly dynamics and kinetics. Herein, we design a series of linear polymers with different side groups for further coordination-driven self-assembly based on shape-complementarity. Such a design introduces a main-chain confinement which effectively slows down the assembly process of side groups, thus allowing us to monitor the real-time evolution of lychee-like nanostructures. The function related to the non-equilibrium nature is further explored by performing photothermal conversion study. The ability to observe and capture non-equilibrium states in this supramolecular system will enhance our understanding of the thermodynamic and kinetic features as well as functions of living systems.
Asunto(s)
Nanoestructuras , Polímeros , Polímeros/química , Nanoestructuras/química , Termodinámica , CinéticaRESUMEN
As the most common malignancy in humans, oral squamous cell carcinoma (OSCC) not only harms the people's health but also undermines their confidence after facial surgery. Early detection and treatment can effectively reduce these damages. The unique collateral trans-cleavage nuclease activity of clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a system was utilized to realize the detection of nucleic acid with high sensitivity. So, in this work, we designed a point-of-care testing (POCT) platform for the detection of OSCC-associated salivary hsa-miRNA 31-5p (miR-31) via the cascade signal amplification of "invading stacking primer" (IS-primer) amplification reaction (ISAR), CRISPR/Cas12a, and dual-mode paper-based strip (dm-Strip). To amplify the detection signal of trace miR-31, the cascade signal amplification of CRISPR/Cas12a system coupling with ISAR was designed in a one-pot reaction at a constant temperature. The target miR-31 could activate the ISAR to generate numerous DNAs, which would further trigger the trans-cleavage effect of Cas12a to catalyze the nonspecific single-stranded DNA (ssDNA) cleavage. This ssDNA was labeled with digoxin and biotin at the 5' and 3' termini (digoxin/ssDNA/biotin), respectively, which led to generate the naked-eye signal and fluorescent signal of the designed dm-Strip. The whole detection time was 90 min with limit-of-detection (LOD) down to aM level. This ISAR/Cas12a-based dm-Strip (ISAR/Cas12a-dmStrip) allowed for the portable and ultrasensitive detection of miRNA, an important step in early diagnosis of OSCC and biomedical research.
Asunto(s)
Neoplasias de Cabeza y Cuello/diagnóstico , MicroARNs/análisis , Técnicas de Amplificación de Ácido Nucleico , Papel , Tiras Reactivas/química , Saliva/química , Carcinoma de Células Escamosas de Cabeza y Cuello/diagnóstico , Proteínas Bacterianas/genética , Proteínas Asociadas a CRISPR/genética , Sistemas CRISPR-Cas/genética , Endodesoxirribonucleasas/genética , Humanos , MicroARNs/genéticaRESUMEN
To accurately and quantitatively detect the gear pitting of different levels on the actual site, this paper studies a new vision measurement approach based on a tunable vision detection platform and the mask region-based convolutional neural network (Mask R-CNN). The shooting angle can be properly set according to the specification of the target gear. With the obtained sample set of 1500 gear pitting images, an optimized deep Mask R-CNN was designed for the quantitative measurement of gear pitting. The effective tooth surface and pitting was firstly and simultaneously recognized, then they were segmented to calculate the pitting area ratio. Considering three situations of multi-level pitting, multi-illumination, and multi-angle, several indexes were used to evaluate detection and segmentation results of deep Mask R-CNN. Experimental results show that the proposed method has higher measurement accuracy than the traditional method based on image processing, thus it has significant practical potential.
RESUMEN
OBJECTIVE: To assess the repeatability(intraobserver comparison)and reproducibility(interobserver comparison)of two different methods for establishing the occlusal plane on digital dental models. METHODS: With Angle's classification as a stratification factor,48 cases were randomly extracted from 806 ones which had integrated clinical data and had their orthodontic treatment from July 2004 to August 2008 in Department of Orthodontics ,Peking University School and Hospital of Stomatology.Post-treatment plaster casts of 48 cases were scanned by Roland LPX-1200 3D laser scanner to generate geometry data as research subjects.In a locally developed software package,one observer repeated 5 times at intervals of at least one week to localize prescriptive landmarks on each digital model to establish a group of functional occlusal planes and a group of anatomic occlusal planes, while 6 observers established two other groups of functional and anatomic occlusal planes independently.Standard deviations of dihedral angles of each group on each model were calculated and compared between the related groups.The models with the five largest standard deviations of each group were studied to explore possible factors that might influence the identification of the landmarks on the digital models. RESULTS: Significant difference of intraobserver variability was not detected between the functional occlusal plane and the anatomic occlusal plane (P>0.1), while that of interobserver variability was detected (P<0.001). The pooled experimental standard deviation the 6 observers established for the functional occlusal plane was 0.2° smaller than that of the anatomic occlusal plane.The functional occlusal plane's variability of intraobserver and interobsever did not differ significantly (P>0.1), while the anatomic occlusal plane's variability of the intraobserver was significantly smaller than that of the interobserver (P<0.001), with a 0.12° difference value of the pooled experimental standard deviation. CONCLUSION: When one observer measures a number of digital models,both the functional and the anatomic occlusal planes are suitable as a conference plane with equal repeatability. When several observers measure a large number of digital models,the functional occlusal plane is more reproducible than the anatomic occlusal plane ,but the difference is small.
Asunto(s)
Oclusión Dental , Modelos Dentales/normas , Humanos , Maloclusión , Variaciones Dependientes del Observador , Reproducibilidad de los Resultados , Programas InformáticosRESUMEN
A novel cellulose composite (denoted as PEI@MMA-1) with porous interconnected structure was prepared by adsorbing methyl cellulose (MC) onto microcrystalline cellulose (MCC) and cross-linking polyethyleneimine (PEI) with MCC by the action of epichlorohydrin, which had the excellent adsorption property, wettability and elasticity. The performances of PEI@MMA-1 composite for removing tetracycline (TC), Cu2+ and coexistent pollutant (TC and Cu2+ mixture) were systematically explored. For single TC or Cu2+ contaminant, the maximum adsorption capacities were 75.53 and 562.23 mg/g at 30 °C, respectively, while in the dual contaminant system, they would form complexes and Cu2+ could play a "bridge" role to remarkably promote the adsorption of TC with the maximum adsorption capacities of 281.66 and 253.58 mg/g for TC and Cu2+. In addition, the adsorption kinetics, isotherms and adsorption mechanisms of single-pollutant and dual-pollutant systems have been thoroughly investigated. Theoretical calculations indicated that the amide group of TC molecule with the assistance of Cu2+ interacted with the hydroxyl group of PEI@MMA-1 composite to enhance the TC adsorption capacity. Cycle regeneration and fixed bed column experiments revealed that the PEI@MMA-1 possessed the excellent stability and utility. Current PEI@MMA-1 cellulose composite exhibited a promising application for remediation of heavy metals and antibiotics coexistence wastewater.
Asunto(s)
Celulosa/análogos & derivados , Cobre , Polietileneimina/análogos & derivados , Contaminantes Químicos del Agua , Cobre/química , Adsorción , Contaminantes Químicos del Agua/química , Tetraciclina/química , Antibacterianos , Iones , CinéticaRESUMEN
Integrating flexible triboelectric nanogenerators (TENGs) into firefighting clothing offers exciting opportunities for wearable portable electronics in personal protective technology. However, it is still a grand challenge to produce eco-friendly TENGs from biodegradable and low-cost natural polymers for mechanical-energy harvesting and self-powered sensing. Herein, conductive polypyrrole (PPy) and natural chitosan (CS)/phytic acid (PA) tribonegative materials were employed onto the Lycra fabric (LC) in turn to assemble the biodegradable and flame-retardant single-electrode mode LC/PPy/CS/PA TENG (abbreviated as LPCP-TENG). The resultant LPCP-TENG exhibits truly wearable breathability (1378.6 mm/s), elasticity (breaking elongation 291 %), and shape adaptivity performance that can produce an open circuit voltage of 0.3 V with 2 N contact pressure at a working frequency of 5 Hz with a limiting oxygen index of 35.2 %. Furthermore, facile monitoring for human motion of firefighters on fireground is verified by LPCP-TENG when used as self-powered flexible tactile sensor. In addition, degradation experiments have shown that waste LPCP-TENG can be fully degraded in soil within 120 days. This work broadens the applicational range of wearable TENG to reduce the environmental effects of abandoned TENG, exhibiting prosperous applications prospects in the field of wearable power source and self-powered motion detection sensor for personal protection application on fireground.
Asunto(s)
Quitosano , Retardadores de Llama , Dispositivos Electrónicos Vestibles , Humanos , Celulosa , Polímeros , Pirroles , Ácido Fítico , VestuarioRESUMEN
This study investigates the efficacy of two-dimensional (2D) carbon and inorganic nanostructures as reinforcing agents for cross-linked composites of the biodegradable and biocompatible polymer polypropylene fumarate (PPF) as a function of nanostructure concentration. PPF composites were reinforced using various 2D nanostructures: single- and multiwalled graphene oxide nanoribbons (SWGONRs, MWGONRs), graphene oxide nanoplatelets (GONPs), and molybdenum disulfide nanoplatelets (MSNPs) at 0.01-0.2 weight% concentrations. Cross-linked PPF was used as the baseline control, and PPF composites reinforced with single- or multiwalled carbon nanotubes (SWCNTs, MWCNTs) were used as positive controls. Compression and flexural testing show a significant enhancement (i.e., compressive modulus = 35-108%, compressive yield strength = 26-93%, flexural modulus = 15-53%, and flexural yield strength = 101-262% greater than the baseline control) in the mechanical properties of the 2D-reinforced PPF nanocomposites. MSNP nanocomposites consistently showed the highest values among the experimental or control groups in all the mechanical measurements. In general, the inorganic nanoparticle MSNP showed a better or equivalent mechanical reinforcement compared to carbon nanomaterials, and 2D nanostructures (GONPs, MSNPs) are better reinforcing agents compared to one-dimensional (1D) nanostructures (e.g., SWCNTs). The results also indicated that the extent of mechanical reinforcement is closely dependent on the nanostructure morphology and follows the trend nanoplatelets > nanoribbons > nanotubes. Transmission electron microscopy of the cross-linked nanocomposites indicated good dispersion of nanomaterials in the polymer matrix without the use of a surfactant. The sol-fraction analysis showed significant changes in the polymer cross-linking in the presence of MSNP (0.01-0.2 wt %) and higher loading concentrations of GONP and MWGONR (0.1-0.2 wt %). The analysis of surface area and aspect ratio of the nanostructures taken together with the above results indicated differences in nanostructure architecture (2D vs 1D nanostructures), and the chemical compositions (inorganic vs carbon nanostructures), number of functional groups, and structural defects for the 2D nanostructures may be key properties that affect the mechanical properties of 2D nanostructure-reinforced PPF nanocomposites and the reason for the enhanced mechanical properties compared to the controls.
Asunto(s)
Huesos/química , Nanocompuestos/química , Polímeros/química , Ingeniería de Tejidos/métodos , Materiales Biocompatibles/química , Resinas Compuestas/química , Fuerza Compresiva , Fumaratos/química , Humanos , Microscopía Electrónica de Transmisión , Nanotubos de Carbono/química , Polipropilenos/químicaRESUMEN
Zinc (Zn) is a new class of bioresorbable metal that has potential for cardiovascular stent material, orthopedic implants, wound closure devices, etc. However, pure Zn is not ideal for these applications due to its low mechanical strength and localized degradation behavior. Alloying is the most common/effective way to overcome this limitation. Still, the choice of alloying element is crucial to ensure the resulting alloy possesses sufficient mechanical strength, suitable degradation rate, and acceptable biocompatibility. Hereby, we proposed to blend selective transition metals (i.e., vanadium-V, chromium-Cr, and zirconium-Zr) to improve Zn's properties. These selected transition metals have similar properties to Zn and thus are beneficial for the metallurgy process and mechanical property. Furthermore, the biosafety of these elements is of less concern as they all have been used as regulatory approved medical implants or a component of an implant such as Ti6Al4V, CoCr, or Zr-based dental implants. Our study showed the first evidence that blending with transition metals V, Cr, or Zr can improve Zn's properties as bioresorbable medical implants. In addition, three in vivo implantation models were explored in rats: subcutaneous, aorta, and femoral implantations, to target the potential clinical applications of bioresorbable Zn implants.
RESUMEN
Additively manufactured scaffolds offer significant potential for treating bone defects, owing to their porous, customizable architecture and functionalization capabilities. Although various biomaterials have been investigated, metals - the most successful orthopedic material - have yet to yield satisfactory results. Conventional bio-inert metals, such as titanium (Ti) and its alloys, are widely used for fixation devices and reconstructive implants, but their non-bioresorbable nature and the mechanical property mismatch with human bones limit their application as porous scaffolds for bone regeneration. Advancements in additive manufacturing have facilitated the use of bioresorbable metals, including magnesium (Mg), zinc (Zn), and their alloys, as porous scaffolds via Laser Powder Bed Fusion (L-PBF) technology. This in vivo study presents a comprehensive, side-by-side comparative analysis of the interactions between bone regeneration and additively manufactured bio-inert/bioresorbable metal scaffolds, as well as their therapeutic outcomes. The research offers an in-depth understanding of the metal scaffold-assisted bone healing process, illustrating that Mg and Zn scaffolds contribute to the bone healing process in distinct ways, but ultimately deliver superior therapeutic outcomes compared to Ti scaffolds. These findings suggest that bioresorbable metal scaffolds hold considerable promise for the clinical treatment of bone defects in the near future.
Asunto(s)
Aleaciones , Materiales Biocompatibles , Humanos , Huesos , Prótesis e Implantes , Magnesio , Titanio , ZincRESUMEN
The development of biomimetic materials with anisotropic topological structure and wide range of adjustable mechanical properties is central to tissue engineering fields. In this work, on the basis of a stiff/stretchable dually crosslinked hydrogel, we paid more attention to the synergistic contribution of the confined drying and re-swelling (CDR) effect and Hofmeister effect to its micro structures, polymer aggregation states and mechanical strength. Specifically, by changing the pre-strains of the CDR procedure and the soaking time during the salting-out procedure, the arrangement structure orientation, chain-entanglement density, and supramolecular interaction strength within the polymer can be adjusted by changing the processing sequence of the two procedures, so that to obtain anisotropic biomimetic hydrogels with adjustable mechanical properties in a wide range. Thus, this engineered anisotropic polymer can mimic the natural tissues' mechanical properties in regeneration. Moreover and importantly, these anisotropic hydrogels exhibit prominent self-recovery properties. In summary, with the integration of molecular and structural engineering approaches, this study presents a universal strategy for developing anisotropic hydrogels, which could be widely used as biomimetic substitutes with anisotropic features in tissue regeneration.
Asunto(s)
Biomimética , Hidrogeles , Anisotropía , Hidrogeles/química , Polímeros , Ingeniería de Tejidos/métodosRESUMEN
Intravital microscopy (IVM) enables visualization of cell movement, division, and death at single-cell resolution. IVM through surgically inserted imaging windows is particularly powerful because it allows longitudinal observation of the same tissue over days to weeks. Typical imaging windows comprise a glass coverslip in a biocompatible metal frame sutured to the mouse's skin. These windows can interfere with the free movement of the mice, elicit a strong inflammatory response, and fail due to broken glass or torn sutures, any of which may necessitate euthanasia. To address these issues, windows for long-term abdominal organ and mammary gland imaging were developed from a thin film of polydimethylsiloxane (PDMS), an optically clear silicone polymer previously used for cranial imaging windows. These windows can be glued directly to the tissues, reducing the time needed for insertion. PDMS is flexible, contributing to its durability in mice over time-up to 35 days have been tested. Longitudinal imaging is imaging of the same tissue region during separate sessions. A stainless-steel grid was embedded within the windows to localize the same region, allowing the visualization of dynamic processes (like mammary gland involution) at the same locations, days apart. This silicone window also allowed monitoring of single disseminated cancer cells developing into micro-metastases over time. The silicone windows used in this study are simpler to insert than metal-framed glass windows and cause limited inflammation of the imaged tissues. Moreover, embedded grids allow for straightforward tracking of the same tissue region in repeated imaging sessions.
Asunto(s)
Microscopía Intravital , Siliconas , Animales , Movimiento Celular , Diagnóstico por Imagen , Microscopía Intravital/métodos , Ratones , CráneoRESUMEN
In plants, NO has been proved the function of improving abiotic stress resistance. However, the role of NO in the lignin metabolism of okra under cold stress has not been clarified. Here, histochemical staining and lignin content analysis showed that cold stress promoted the lignin accumulation of cold stored okra pods, and NO inhibited the lignin accumulation and delayed lignification process. To better understand the roles of NO in okra cold stress resistance mechanism, the full-length transcriptome data of 'Hokkaido' was analyzed. The SNP-treated okra transcriptome and cPTIO-treated okra transcriptome were obtained. A total of 41957 unigenes were screened out from three groups at 10 d, among which, 33, 78 and 18 DEGs were found in ddH2O-treat, SNP-treat and cPTIO-treat group, respectively. Transcriptomic data suggested that the genes involved in lignin biosynthesis showed downregulation under SNP treatment. Transcriptomic data and enzyme activity showed that exogenous NO significantly promoted the biosynthesis of endogenous NO by enhancing NOS activity. Transcriptomic data and plant hormone data showed that NO played an important role in the process of inhibiting the ethylene and ABA synthesis mechanism of okra and thereby reducing the endogenous ethylene and ABA content under chilling stress. Relevant physiological data showed that NO helped to the protection of ROS scavenging system and removed the MDA and H2O2 induced by cold stress. These results provided a reference for studying the molecular mechanism of nitric oxide delaying the lignification of okra, and also provided a theoretical basis for postharvest storage of vegetables.
Asunto(s)
Abelmoschus , Perfilación de la Expresión Génica , Peróxido de Hidrógeno , Lignina , Óxido Nítrico , TranscriptomaRESUMEN
A cardiovascular stent is a small mesh tube that expands a narrowed or blocked coronary artery. Unfortunately, current stents, regardless metallic or polymeric, still largely fall short to the ideal clinical needs due to late restenosis, thrombosis and other clinical complications. Nonetheless, metallic stents are preferred clinically thanks to their superior mechanical property and radiopacity to their polymeric counterparts. The emergence of bioresorbable metals opens a window for better stent materials as they may have the potential to reduce or eliminate late restenosis and thrombosis. In fact, some bioresorbable magnesium (Mg)-based stents have obtained regulatory approval or under trials with mixed clinical outcomes. Some major issues with Mg include the too rapid degradation rate and late restenosis. To mitigate these problems, bioresorbable zinc (Zn)-based stent materials are being developed lately with the more suitable degradation rate and better biocompatibility. The past decades have witnessed the unprecedented evolution of metallic stent materials from first generation represented by stainless steel (SS), to second generation represented by Mg, and to third generation represented by Zn. To further elucidate their pros and cons as metallic stent materials, we systematically evaluated their performances in vitro and in vivo through direct side-by-side comparisons. Our results demonstrated that tailored Zn-based material with proper configurations could be a promising candidate for a better stent material in the future.
Asunto(s)
Magnesio , Acero Inoxidable , Implantes Absorbibles , Materiales Biocompatibles , Ensayo de Materiales , Stents , ZincRESUMEN
Microplastic pollution due to land runoff has gained increasing attention as it is closely associated with human beings. In this study, we analyzed the occurrence characteristics of microplastics in drainage channel and main drainage channel in Hetao irrigation district of Inner Mongolia and estimated its quality. Through field sampling, the density separation of suspension method and microscope observation, Fourier infrared spectrum measurement, and proportional flow method, the abundance distribution, shape, color, particle size, and chemical composition of microplastics in the water body and sediment of the drainage channel and main drainage channel in the Hetao irrigation district were identified. The mass of microplastics transported in the main drainage channel was also estimated. The results showed that the value range of microplastic abundance in the water body of the drainage channel and the main drainage channel in Hetao irrigation district was 2880-11200 n ·m-3, and the value range of microplastic abundance in the sediment was 100-292 n ·kg-1. Fiber was the most common microplastic form, occupying 34.98%-70.39% and 42.24%-58.56% in the water and sediment, respectively. The color of microplastics was mainly transparent, which occupied 46.43%-61.51% and 40.41%-57.44% in the water and sediment, respectively. The largest particle size of microplastics was<0.5 mm, accounting for 46.43%-61.51% and 43.27%-54.79% in the water and sediment microplastics, respectively. It was concluded that polyethylene was the most common type (43%), followed by polystyrene (34%) and polypropylene (16%) using Fourier infrared spectroscopy. It was estimated that the main drainage channel in the Hetao irrigation district could transport 116.06 kg of microplastics into Lake Ulansuhai every day, and a serious microplastic pollution effect was generated due to the accumulation of microplastics in Lake Wulangsuhai. This study can provide reference for the pollution of microplastics in Hetao irrigation district of Inner Mongolia.
Asunto(s)
Plásticos , Contaminantes Químicos del Agua , China , Monitoreo del Ambiente , Microplásticos , Contaminantes Químicos del Agua/análisisRESUMEN
In this paper, the electronspun Polylactic acid (PLA)/TiO2 nanofluids (nfs) fibrous membrane with good toughness, hydrophilicity and antibacterial activities are fabricated by taking full advantages of solvent-free TiO2 nfs with amphiphilicity and ionic conductivity. The resulting PLA/TiO2 nfs fibrous membrane exhibits excellent mechanical performance with a tensile strength and elongation at break of 3.68 MPa and 97.32 MPa at 5 wt% loading, respectively, which is 4 and 8 times higher than that of pure PLA, respectively. Additionally, TiO2 nfs can migrate onto the surface of PLA fibers during electrospun process, which significantly enhanced hydrophilicity, antistatic property, moisture sorption capacity and wicking properties of PLA fabrics. Meanwhile, the membrane also showed ultrafast water filtration of 3500 L m-2 h-1 driven by gravity force, which is 10-12 times higher than that of commercial ultrafiltration membrane. After ion-exchange reaction with salt solution, excellent antibacterial activity (against E. coli and S. aureus was 95% and 99.9%, respectively) and separation efficiency (above 90% on E. coli) of the obtained fabrics are also achieved. Overall, organic nfs are an idea candidate for fabricating hydrophilic PLA based biodegradable fabric that can be applied in contaminated water treatment, antibacterial textiles and biodegradable absorption materials.
Asunto(s)
Membranas Artificiales , Plásticos/química , Poliésteres/química , Antibacterianos/química , Antibacterianos/farmacología , Fenómenos Químicos , Técnicas de Química Sintética , Conductividad Eléctrica , Interacciones Hidrofóbicas e Hidrofílicas , Ensayo de Materiales , Permeabilidad , Plásticos/síntesis química , Solventes , Análisis Espectral , Resistencia a la Tracción , Titanio/químicaRESUMEN
The montan resin (MR) is a solid waste produced during the industrial process of refined montan wax from lignite, and usually disposed by landfill and incineration, which easily cause environmental pollution and resource waste. Based its physicochemical properties, our study attempted to modify MR by Bacillus benzoevorans to achieve ecological utilization of MR. As results, the weight loss rate of MR, expressed as modification degree, was found to increase with the increase of B. benzoevorans-incubated time. The apparent oil-water partition coefficient (Kow), used to evaluate the improvement on hydrophilicity of MR, significantly increased (P < 0.01) after modification. IR analysis showed the functional groups of -OH and C=O in modified MR were more than those in MR. Meanwhile, comparison of the chemical changes between MR and modified MR by relatively quantitative analysis of gas chromatography-mass spectrometry (GC-MS) revealed that the content of some chemical components in the latter decreased, and the newly appeared chemical components all had more oxygen-containing functional groups. The bioactivity of the modified MR in agricultural application was evaluated regarding germination and seedling growth of maize seed preliminarly. Compared with the original MR-treated group, the modified MR showed an obvious effect on promoting the growth and germination of maize.
Asunto(s)
Bacillus/metabolismo , Resinas Sintéticas/metabolismo , Cromatografía de Gases y Espectrometría de Masas , Germinación/fisiología , Plantones/metabolismo , Semillas/metabolismo , Instalaciones de Eliminación de Residuos , Zea mays/metabolismoRESUMEN
Metallic materials have been extensively applied in clinical practice due to their unique mechanical properties and durability. Recent years have witnessed broad interests and advances on surface functionalization of metallic implants for high-performance biofunctions. Calcium phosphates (CaPs) are the major inorganic component of bone tissues, and thus owning inherent biocompatibility and osseointegration properties. As such, they have been widely used in clinical orthopedics and dentistry. The new emergence of surface functionalization on metallic implants with CaP coatings shows promise for a combination of mechanical properties from metals and various biofunctions from CaPs. This review provides a brief summary of state-of-art of surface biofunctionalization on implantable metals by CaP coatings. We first glance over different types of CaPs with their coating methods and in vitro and in vivo performances, and then give insight into the representative biofunctions, i.e. osteointegration, corrosion resistance and biodegradation control, and antibacterial property, provided by CaP coatings for metallic implant materials.
RESUMEN
Zinc (Zn) has recently emerged as a promising biodegradable metal thanks to its critical physiological roles and promising degradation behavior. However, cytocompatibility and antibacterial property of Zn is still suboptimal, in part, due to the excessive Zn ions released during degradation. Inspired by the calcium phosphate-based minerals in natural bone tissue, zinc phosphate (ZnP) coatings were prepared on pure Zn using a chemical conversion method in this study. The coating morphology was then optimized through controlling the pH of coating solution, resulting in a homogeneous micro-/nano-ZnP coating structure. The ZnP coating significantly increased the cell viability, adhesion, and differentiation of pre-osteoblasts and vascular endothelial cells, while significantly reduced the adhesion of the platelets and E. coli. Additionally, ZnP coating significantly reduced the Zn ion release from the bulk material during degradation process, resulting in a much lower Zn2+ concentration and pH change in the surrounding environment. The improved hemocompatibility, cytocompatibility and antibacterial performance of ZnP coated Zn biomaterials could be mainly attributed to the controlled Zn ion release and micro-/nano-scaled coating structure. Taken together, ZnP coating on Zn-based biomaterial appears to be a viable approach to enhance its biocompatibility and antibacterial property as well as to control its degradation rate. Statement of Significance Zn and its alloys are promising biodegradable implant materials for orthopedic and cardiovascular applications. However, notable cytotoxicity has been reported due to degradation products accumulated in the local environment, largely overdosed Zn2+. Thus, controlling burst Zn2+ release is the key to minimize the toxicity of Zn implants. To achieve this goal, we prepared a homogenous ZnP coating on Zn metals thanks to its easy synthesis, stable chemical property, and good biocompatibility. Results showed that ZnP not only improved the cell viability, adhesion and proliferation, but also significantly reduced the attachment of platelet and bacterial. Therefore, ZnP could be a promising approach to improve the functional performance of Zn-based implants, and potentially be applied to many other medical implants.
Asunto(s)
Antibacterianos/farmacología , Materiales Biocompatibles Revestidos/farmacología , Fosfatos/farmacología , Compuestos de Zinc/farmacología , Animales , Adhesión Celular/efectos de los fármacos , Diferenciación Celular/efectos de los fármacos , Línea Celular , Forma de la Célula/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Corrosión , Electroquímica , Escherichia coli/efectos de los fármacos , Fluorescencia , Humanos , Ensayo de Materiales , Ratones , Pruebas de Sensibilidad Microbiana , Osteoblastos/citología , Osteoblastos/efectos de los fármacos , Osteoblastos/ultraestructuraRESUMEN
Zinc has been described as the 'calcium of the twenty-first century'. Zinc-based degradable biomaterials have recently emerged thanks to their intrinsic physiological relevance, biocompatibility, biodegradability, and pro-regeneration properties. Zinc-based biomaterials mainly include: metallic zinc alloys, zinc ceramic nanomaterials, and zinc metal-organic frameworks (MOFs). Metallic zinc implants degrade at a desirable rate, matching the healing pace of local tissues, and stimulating remodeling and formation of new tissues. Zinc ceramic nanomaterials are also beneficial for tissue engineering and therapy thanks to their nanostructures and antibacterial properties. MOFs have large surface areas and are easily functionalized, making them ideal for drug delivery and cancer therapy. This review highlights recent developments in zinc-based biomaterials, discusses obstacles to overcome, and pinpoints directions for future research.
Asunto(s)
Materiales Biocompatibles/farmacología , Regeneración/efectos de los fármacos , Medicina Regenerativa/métodos , Oligoelementos/farmacología , Zinc/farmacologíaRESUMEN
Zn-based biomaterials have emerged as promising new types of bioresorbable metallics applicable to orthopedic devices, cardiovascular stents, and other medical applications recently. Compared to other degradable metallic biomaterials (i.e., Mg- or Fe-based), Zn biomaterials have a more appropriate corrosion rate without hydrogen gas evolution. Here, we evaluated the potential of Zn-based metallics as medical implants, both in vitro and in vivo, alongside a standard benchmark Mg alloy, AZ31. The mechanical properties of the pure Zn were not strong enough but were significantly enhanced (microhardness > 70 kg/mm2, strength > 220 MPa, elongation > 15%) after alloying with Sr or Mg (1.5 at. %), surpassing the minimal design criteria for load-bearing device applications. The corrosion rate of Zn-based biomaterials was about 0.4 mm/year, significantly slower than that of AZ31. The measured cell viability and proliferation of three different human primary cells fared better for Zn-based biomaterials than AZ31 using both direct and indirect culture methods. Platelet adhesion and activation on Zn-based materials were minimal, significantly less than on AZ31. The hemolysis ratio of red cells (<0.5%) after incubation with Zn-based materials was also well below the ISO standard of 5%. Moreover, Zn-based biomaterials promoted stem cell differentiation to induce the extracellular matrix mineralization process. In addition, in vivo animal testing using subcutaneous, bone, and vascular implantations revealed that the acute toxicity and immune response of Zn-based biomaterials were minimal/moderate, comparable to that of AZ31. No extensive cell death and foreign body reactions were observed. Taken together, Zn-based biomaterials may have a great potential as promising candidates for medical implants.