RESUMEN
Inflammation and alveolar bone destruction constitute the main pathological process of periodontitis. However, the molecular mechanisms of bone destruction under the inflammation environment remain unclear. This study aims to explore the role of Ephrin-B2/EphB4 signaling in osteogenic differentiation under the inflammation environment. Mouse pre-osteoblasts MC3T3-E1 were pretreated with lipopolysaccharide of Porphyromonas gingivalis (Pg-LPS). The Ephrin-B2/EphB4 signaling was activated, and the osteogenic differentiation of cells was examined. The results showed that activation of Ephrin-B2/EphB4 signaling promoted the expression levels of osteogenic differentiation-related genes, and also relieved the inhibitory effect of Pg-LPS on osteogenesis. Noticeably, the effect of Ephrin-B2/EphB4 signaling might be related to the mitogen-activated protein kinase (MAPK) pathway. While applying Ephrin-B2-Fc and EphB4-Fc to periodontitis mice, we observed the reduction of alveolar crest destruction. The current study revealed the possible role of Ephrin-B2/EphB4 signaling in reducing bone destruction in periodontitis and suggested its potential values for further research.
Asunto(s)
Efrina-B2/metabolismo , Fragmentos Fc de Inmunoglobulinas/inmunología , Inflamación/prevención & control , Osteoblastos/citología , Osteogénesis , Periodontitis/prevención & control , Receptor EphB4/metabolismo , Animales , Diferenciación Celular , Efrina-B2/genética , Efrina-B2/inmunología , Inflamación/inmunología , Inflamación/metabolismo , Masculino , Ratones , Ratones Endogámicos C57BL , Osteoblastos/inmunología , Osteoblastos/metabolismo , Periodontitis/inmunología , Periodontitis/metabolismo , Receptor EphB4/genética , Receptor EphB4/inmunología , Transducción de SeñalRESUMEN
STATEMENT OF PROBLEM: Whether fiber-reinforced composite (FRC) posts should be inserted in root canals to restore teeth with multiple roots remains unclear. PURPOSE: The purpose of this finite element analysis (FEA) study was to determine the optimal use of FRC posts in an endodontically treated maxillary first molar with a 4-wall defect and 1.5-mm-high ferrule. MATERIAL AND METHODS: Eight different models of a maxillary first molar were established: no post (NP), post in palatal root (P), post in distobuccal root (DB), post in mesiobuccal root (MB), posts in palatal root and distobuccal root (P+DB), posts in palatal root and mesiobuccal root (P+MB), posts in 2 buccal roots (DB+MB), and posts in all roots (P+DB+MB). Two types of loading were applied: a force of 800 N parallel to the long axis of the tooth to simulate the vertical masticatory force and another force of 225 N at 45 degrees to the long axis of the tooth to simulate the lateral masticatory force. The equivalent stresses on the external surfaces of the tooth tissue, the internal surfaces of the root canals and in the posts, as well as the maximal shear stresses on the post-core interface and the core-dentin interface, were calculated with FEA. RESULTS: All the models showed similar maximal equivalent stress values on the external surfaces of the tooth tissue, and stress concentrations were found at the cervical and furcation area. On the internal surfaces of root canals, an increase of equivalent stress at the middle third of the canals with posts and a decrease at the cervical third were observed. Under vertical loading, the P+DB+MB group showed the largest equivalent stress in the post (76.45 MPa in the palatal post), the DB+MB group showed the largest shear stress on the post-core interface (19.02 MPa), and the MB group showed the largest shear stress on the core-dentin interface (12.07 MPa). Under lateral loading, the P+DB+MB group showed the largest equivalent stress in the post (60.11 MPa in the mesiobuccal post) and the largest shear stress on the post-core interface (13.48 MPa) and the DB group showed the largest shear stress on the core-dentin interface (21.03 MPa). CONCLUSIONS: One post in the palatal canal was found to be appropriate for the FRC post and resin core restoration of a maxillary first molar with a 4-wall defect and 1.5-mm-high ferrule. An additional post in the mesiobuccal canal could help disperse lateral occlusal force and improve retention of the restoration.
RESUMEN
OBJECTIVE: This article introduced a modified method to fabricate an individualized abutment-crown integrated provisional restoration for single-tooth implant restoration in the esthetic zone, which created a satisfactory peri-implant soft tissue architecture. CLINICAL CONSIDERATIONS: Three months after the implant placement, the individualized abutment-crown integrated provisional restoration was designed and fabricated in the laboratory, by referring to the profile of natural contra-lateral tooth digitally, and seated on the implant afterwards. The peri-implant soft tissue architecture was evaluated and the Pink Esthetic Score (PES) was recorded. The provisional restoration stayed on the implant for 3 months until the individualized definitive ceramic abutment and crown were fixed on the implant. CONCLUSIONS: This protocol provided an alternative solution for shaping the peri-implant soft tissue morphology in the esthetic zone by using an individualized abutment-crown integrated provisional restoration and showed promising effect on the esthetics of anterior single-tooth implant restoration. CLINICAL SIGNIFICANCE: The individualized abutment-crown integrated provisional restoration whose emergence profile mirroring that of the natural contra-lateral tooth, was designed with the help of computer-aided design-manufacture (CAD/CAM). It may help shaping the peri-implant soft tissue in the esthetic zone with merits of saving amount of hand labor of technicians as well as clinicians, and reducing the visits of patients.
Asunto(s)
Implantes Dentales de Diente Único , Implantes Dentales , Diseño Asistido por Computadora , Coronas , Estética Dental , HumanosRESUMEN
An appliance was designed and fabricated by using computer-aided design and computer-aided manufacturing (CAD-CAM) and 3-dimensional (3D) printing to combine a custom tray with an intraoral Gothic arch. This helped simplify centric relation recording and combined definitive impression making and centric relation recording into a single step.
Asunto(s)
Diseño Asistido por Computadora , Técnica de Impresión Dental/instrumentación , Diseño de Dentadura/métodos , Dentadura Completa , Registro de la Relación Maxilomandibular/métodos , Impresión Tridimensional , Relación Céntrica , Materiales de Impresión Dental , Humanos , Arcada Edéntula , Mandíbula , Maxilar , Modelos Dentales , Boca EdéntulaRESUMEN
Objective: Understanding the characteristics of alveolar bone resorption in an East Asian population after maxillary incisor extraction and providing a reference for implant treatment plans. Study design: Cone-beam computerized tomography (CBCT) data of 125 East Asian patients with unilateral extraction of maxillary incisors for 3 months were collected. The alveolar bone width and height in the extraction sites were measured and compared with the corresponding contralateral sites. Results: The differences in alveolar bone width between the extraction site and contralateral site were as follows: 4.11 mm, 2.68 mm, and 2.09 mm (3 mm, 5 mm, 7 mm apical from CEJ of the contralateral tooth). Data are expressed as the median. The horizontal resorption ratio of alveolar bone was 49.94 %, 31.5 %, and 24.46 %. The difference in alveolar bone height was 0.78 mm. The vertical resorption ratio was 7.78 %. The resorption did not differ significantly between sexes and was not significantly affected by tooth positions. Conclusions: In the studied East Asian population, significant horizontal and vertical alveolar bone resorption occurs after natural healing of maxillary incisor extraction for 3 months. The closer to the alveolar ridge crest, the more significant the horizontal resorption, resulting in an "inverted triangle" shape residual alveolar bone.
RESUMEN
Slow dissolution/hydrolysis of insoluble/macromolecular organics and poor sludge filterability restrict the application potential of anaerobic membrane bioreactor (AnMBR). Bubble-free membrane microaeration was firstly proposed to overcome these obstacles in this study. The batch anaerobic digestion tests feeding insoluble starch and soluble peptone with and without microaeration showed that microaeration led to a 65.7-144.8% increase in methane production and increased critical flux of microfiltration membrane via driving the formation of large sludge flocs and the resultant improvement of sludge settleability. The metagenomic and bioinformatic analyses showed that microaeration significantly enriched the functional genes and bacteria for polysaccharide and protein hydrolysis, microaeration showed little negative effects on the functional genes involved in anaerobic metabolisms, and substrate transfer from starch to peptone significantly affected the functional genes and microbial community. This study demonstrates the dual synergism of microaeration to enhance the dissolution/hydrolysis/acidification of insoluble/macromolecular organics and sludge filterability for AnMBR application.
Asunto(s)
Reactores Biológicos , Filtración , Membranas Artificiales , Aguas del Alcantarillado , Reactores Biológicos/microbiología , Aguas del Alcantarillado/microbiología , Anaerobiosis , Filtración/métodos , Metano/metabolismo , Hidrólisis , Almidón/metabolismoRESUMEN
Purpose: To explore which restoration strategy generates the most favorable stress distribution in an endodontically-treated maxillary first molar with mesial-occlusal-distal-palatal defect. Methods: Models with one post in palatal canal (PP), each post in palatal and distobuccal canals (PDP), each post in palatal and mesiobuccal canals (PMP), and each post in all canals (PDMP) were established for an endodontically-treated maxillary first molar with mesial-occlusal-distal-palatal defect either with fiber-reinforced composite (FRC) post or gold alloy cast (GAC) post. A 400-N vertical force and a 225-N lateral force were respectively applied. The Mohr-Coulomb stress ratio (σMC ratio) in the residual tooth structure (RTS), the resin cement, and the crowns, the tensile stress (σt) and compressive stress (σc) in the FRC posts, the von-Mises stress ratio (σvM ratio) in the GAC post-and-cores, and the σt and shear stress (σs) at the adhesive interfaces were calculated using finite element analysis. Results: FRC posts generated lower σMC ratio than GAC posts in the RTS (0.3274-0.3643 vs. 0.3399-0.4118). Among the FRC post groups, the PDMP group got the lowest σs at the dentin-post interface (14.92 MPa) and the abutment-crown interface (8.242 MPa) under vertical loading, as well as the lowest σMC ratio in the RTS (0.3381) and the lowest σs at the dentin-post interface (38.00 MPa) under lateral loading. Conclusions: From the point of stress distribution, placing FRC posts in the palatal, distobuccal, and mesiobuccal canals is the optimal strategy in restoring a severely damaged maxillary first molar, provided that lateral occlusal force is reduced.
RESUMEN
It has been reported that cyclic stretch could induce inflammatory reaction in human periodontal ligament cells (HPDLCs). Though reactive oxygen species (ROS) has been reported to be involved in pathogen-induced periodontal inflammatory reaction, its role in the force-related periodontal diseases has not been well clarified. This study inspected the role of ROS in the cyclic stretch-induced inflammatory reaction in HPDLCs and studied the inhibitory effect of antioxidant apocynin on this inflammatory reaction. Results confirmed that cyclic stretch induced inflammatory reaction and production of ROS in HPDLCs. This inflammatory reaction was inhibited by apocynin through blocking the production of ROS. The cyclic stretch also induced the expression of caspase-1 and NLRP3 inflammasome, which could also be inhibited by apocynin. Moreover, the cyclic stretch-induced inflammatory reaction was inhibited by caspase-1 inhibitor. Collectively, it is the first time that increased intracellular ROS was proved to play as an intermediate signal in the cyclic stretch-induced inflammatory reaction in HPDLCs, via a caspase-1-dependent pathway. The inhibitory effect of apocynin on the cyclic stretch-induced inflammatory reaction in HPDLCs shows the potential of antioxidants in the treatment of force-related periodontal inflammatory diseases.