Simple functionalization strategies for enhancing nanoparticle separation and recovery with asymmetric flow field flow fractionation.

Due to the increasing use of engineered nanomaterials in consumer products, regulatory agencies and other research organizations have determined that the development of robust, reliable, and accurate methodologies to characterize nanoparticles in complex matrices is a top priority. Of particular interest are methods that can separate and determine the size of nanomaterials in samples that contain polydisperse and/or multimodal nanoparticle populations. Asymmetric-flow field flow fractionation (AF4) has shown promise for the separation of nanoparticles with wide size range distributions; however, low analyte recoveries and decreased membrane lifetimes, due to membrane fouling, have limited its application. Herein, we report straightforward strategies to minimize membrane fouling and improve nanoparticle recovery by functionalizing the surface of the nanoparticles, as well as that of the AF4 membranes. Gold nanoparticles (AuNP) were stabilized through functionalization with a phosphine molecule, whereas the surface of the membranes was coated with a negatively charged polystyrenesulfonate polymer. Improved nanoparticle separation, recoveries of 99.1 (±0.5) %, and a detection limit of 6 µg/kg were demonstrated by analyzing AuNP reference materials of different sizes (e.g., 10, 30, and 60 nm), obtained from the National Institute of Standards and Technology (NIST). Furthermore, the stability of the polymer coating and its specificity toward minimizing membrane fouling were demonstrated.

In vitro test methods for evaluating high molecular weight polyethylene oxide polymer induced hemolytic and thrombotic potential.

To combat opioid abuse, the U.S. Food and Drug Administration (FDA) released a comprehensive action plan to address opioid addiction, abuse, and overdose that included increasing the prevalence of abuse-deterrent formulations (ADFs) in opioid tablets. Polyethylene oxide (PEO) has been widely used as an excipient to deter abuse via nasal insufflation. However, changes in abuse patterns have led to unexpected shifts in abuse from the nasal route to intravenous injection. Case reports identify adverse effects similar to thrombotic thrombocytopenic purpura (TTP) syndrome following the intravenous (IV) abuse of opioids containing PEO excipient. Increased risk of IV opioid ADF abuse compared to clinical benefit of the drug led to the removal of one opioid product from the market in 2017. Because many generic drugs containing PEO are still in development, there is interest in assessing safety consistent with generic drug regulation and unintended uses. Currently, there are no guidelines or in vitro assessment tools to characterize the safety of PEO excipients taken via intravenous injection. To create a more robust excipient safety evaluation tool and to study the mechanistic basis of HMW PEO-induced TMA, a dynamic in vitro test system involving blood flow through a needle model has been developed.

Asymmetrical Flow Field Flow Fractionation for Molar Mass Characterization of Polyethylene Oxide in Abuse-Deterrent Formulations.

High molar mass polyethylene oxide (HM-PEO) is commonly used to enhance the mechanical strength of solid oral opioid drug products to deter abuse. Because the properties of PEO depend on molar mass distribution, accurately determining the molar mass distribution is a necessary part of understanding PEO's role in abuse-deterrent formulations (ADF). In this study, an asymmetrical flow field-flow fractionation (AF4) analytical procedure was developed to characterize PEO polymers with nominal molar masses of 1, 4 or 7 MDa as well as those from in-house prepared placebo ADF. The placebo ADF were manufactured using direct compress or hot-melt-extrusion methods, and subjected to physical manipulation, such as heating and grinding before measurement by AF4 were performed. The molar mass distribution characterized by AF4 revealed that PEO was sensitive to thermal stress, exhibiting decreased molar mass with increased heat exposure. The optimized AF4 method was deemed suitable for characterizing HM-PEO, offering adequate dynamic separation range for PEO with molar mass from 100 kDa to approximately 10 MDa.

Determining critical overlap concentration of polyethylene oxide to support excipient safety assessment of opioid products.

Intravenous administration of abuse-deterrent opioid products poses high safety risks, in part due to the presence of high molecular weight polymeric excipients. Previous in vivo studies in animal models have shown that the higher molecular weight (Mw) polymeric excipients like polyethylene oxide (PEO) were directly linked to such adverse responses as intravenous hemolysis and kidney damage. PEO polymers have been widely used in abuse-deterrent formulations (ADF) of opioid products, adding to concerns over the general safety of the opioid category due to the unknown safety risk from abuse via unintended routes. The current study focused on the determination of the critical overlap concentration (c*) at various PEO molecular weights to aid in explaining differences in observed adverse responses from previous animal studies on the intravenous administration of PEO solutions. Adverse in vivo responses may be related to the viscoelastic regime of the polymer solution, which depends not only on Mw but also on concentration. Having a localized polymer concentration in the blood above the c*, i.e., the transition from the dilute to semi-dilute entangled viscoelastic regime, may influence the flow behavior and interactions of cells in the blood. The relationship of c* to this combination of physical, chemical, and rheological effects is a possible driving force behind adverse in vivo responses.

Polyethylene Oxide Molecular Size Determines the Severity of Atypical Thrombotic Microangiopathy in a Guinea Pig Model of Acute Intravenous Exposure.

In 2017, Opana ER was voluntarily removed from the U.S. market based on concerns that its risks outweighed its therapeutic benefits. The data that supported this conclusion were based on postmarketing evaluation that demonstrated increased intravenous abuse associated outbreaks of HIV, hepatitis C, and uniquely, a thrombotic thrombocytopenic purpura (TTP)-like syndrome. In 2017, the cause was mechanistically linked to intravenous exposure of the high-molecular weight polyethylene oxide (PEO), an excipient component of the drug product. However, it was unknown how differing PEO preparations might alter this response in vivo. Knowing the likelihood of a PEO driven atypical thrombotic microangiopathy with hemolytic uremic syndrome (TMA-HUS), this study was specifically designed with the primary objective focused on understanding the impact of PEO molecular weight on TMA-HUS in a guinea pig model of acute repeat PEO (1, 4, and 7 MDa) dosing. Results from this analysis suggest that repeated dosing with PEO 4 and 7 MDa, but not 1 MDa induced a marked intravascular hemolysis with schistocytes, mild anemia, thrombocytopenia, hemoglobinuria, and kidney injury, consistent with observations of a TMA-HUS-like syndrome. Nonetheless, observations of tissue microthrombi, complement or altered von Willebrand factor involvement were not observed, which would be consistent with a definitive TMA. Further, only 7 MDa PEO dosing was associated with marked renal hypoxia. Taken together, this study defines renal injury risk with PEO formulations >1 MDa that is driven by a robust intravascular hemolysis and potentially, tissue hypoxia.