Hyperbranched Polyesters Based on Indole- and Lignin-Derived Monomeric Aromatic Aldehydes as Effective Nonionic Antimicrobial Coatings with Excellent Biocompatibility.

This research aims to investigate nonionic hyperbranched polyesters (HBPs) derived from indole and lignin resources as new nontoxic antimicrobial coatings. Three nonionic HBPs with zero to two methoxy ether substituents on each benzene ring in the polymer backbones were synthesized by melt-polycondensation of three corresponding AB2 monomers. The molecular structures and thermal properties of the obtained HBPs were characterized by gel permeation chromatography, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry analyses. These HBPs were conveniently spin-coated on a silicon substrate, which exhibited significant antibacterial effect against Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecalis). The presence of methoxy substituents enhanced the antimicrobial effect, and the resulting polymers showed negligible leakage in water. Finally, the polymers with the methoxy functionality exhibited excellent biocompatibility according to the results of hemolysis and MTT assay, which may facilitate their biomedical applications.

Injectable Thermosensitive Iodine-Loaded Starch-g-poly(N-isopropylacrylamide) Hydrogel for Cancer Photothermal Therapy and Anti-Infection.

Although photothermal therapy (PTT) can effectively eliminate tumors, the normal tissues near tumors are inevitably damaged by heat and infected by bacteria, which greatly limits the therapeutic effect. In this work, an injectable thermosensitive hydrogel based on iodine-loaded starch-g-poly(N-isopropylacrylamide) (PNSI) is developed to overcome this problem. FTIR, 1 H NMR, and UV-vis spectra confirm the graft copolymerization of poly(N-isopropylacrylamide) with starch and the formation of "iodine-starch" complex. Transmission electron microscope images show PNSI polymer self-assembles into regular spherical nanogel with a size of ≈50 nm. The concentrated nanogel dispersion is a sol at room temperature and transforms to hydrogel at body temperature. Under NIR laser irradiation for 10 min, the ΔT of the nanogel dispersion approachs about 20 °C with excellent thermal stability and high cytotoxicity due to the photothermal effect of the "iodine-starch" complex. After intratumor injection, this injectable hydrogel efficiently inhibites the tumor growth under 808 nm laser irradiation. Furthermore, it can also suppress Staphylococcus aureus infection in the wound post-PTT due to the release of iodine, which promotes wound healing. Therefore, this injectable thermosensitive "iodine-starch" composite hydrogel with advantages of good biocompatible and easy preparation possesses potential application for tumor photothermal therapy and antibacterial infection.

Enzyme-triggered cascade reactions and assembly of abiotic block copolymers into micellar nanostructures.

Catalytic action of an enzyme is shown to transform a non-assembling block copolymer, composed of a completely non-natural repeat unit structure, into a self-assembling polymer building block. To achieve this, poly(styrene) is combined with an enzyme-sensitive methacrylate-based polymer segment carrying carefully designed azobenzene side chains. Once exposed to the enzyme azoreductase, in the presence of coenzyme NADPH, the azobenzene linkages undergo a bond scission reaction. This triggers a spontaneous 1,6-self-elimination cascade process and transforms the initially hydrophobic methacrylate polymer segment into a hydrophilic hydroxyethyl methacrylate structure. This change in chemical polarity of one of the polymer blocks confers an amphiphilic character to the diblock copolymer and permits it to self-assemble into a micellar nanostructure in water.

Enzyme sensitive synthetic polymer micelles based on the azobenzene motif.

In this study, we investigate the potential of an artificial structural motif, azobenzene, in the preparation of enzyme sensitive polymeric nanostructures. For this purpose, an azobenzene linkage is established at the copolymer junction of an amphiphilic diblock copolymer. This polymer assembles into a micellar structure in water. Treatment with the enzyme azoreductase, in the presence of coenzyme NADPH, results in the cleavage of the azo-based copolymer junction and disruption of the micellar assembly. These results suggest that azobenezene is a useful non-natural structural motif for the preparation of enzyme responsive polymer nanoparticles. Due to the presence of azoreductase in the human intestine, such nanomaterials are anticipated to find applicability in the arena of colon-specific delivery systems.

Broad-Spectrum Bactericidal Activity and Remarkable Selectivity of Main-Chain Sulfonium-Containing Polymers with Alternating Sequences.

Incorporation of cationic groups into polymers represents one of the most widely used strategies to prepare antibacterial materials. Sulfonium, as a typical cationic moiety, displays potent antibacterial efficacy in the form of small molecules, however, has long underperformed in polymeric systems. Herein, we developed a series of alternating polysulfoniums, where the hydrophobicity of each alternating unit can be accurately tuned by altering the monomer precursors. Excellent antibacterial activity against a broad spectrum of clinically relevant bacteria, including Methicillin-resistant Staphylococcus aureus, can be obtained in the optimal compositions with minimum bactericidal concentrations in the range of 1.25-10 µg/mL, as well as negligible hemolytic effect at polymer concentrations even up to 10000 µg/mL. Bacteria do not readily develop resistance to polysulfoniums due to the antibacterial action is possibly the membrane disrupting mechanism. This work demonstrates sulfonium-based polymers with well-defined sequences can function as a promising candidate to combat drug-resistant bacterial infection.

Main-Chain Sulfonium-Containing Homopolymers with Negligible Hemolytic Toxicity for Eradication of Bacterial and Fungal Biofilms.

Antimicrobials against planktonic cells and established biofilms at low doses are in increasing demand to tackle antibiotic-resistant biofilm infections. As a promising alternative to antibiotics, cationic polymers can effectively kill planktonic microbes but usually require high concentrations to eradicate the established biofilms. Herein, we developed a series of sulfonium-based homopolymers with cationic sulfoniums and alkane spacers in the main chain. These polysulfoniums presented effective activity against planktonic fungi (Candida albicans) and bacteria (Escherichia coli and Staphylococcus aureus) with minimum inhibition concentrations (MICs) of 0.5-32 µg/mL, and the optimal composition can provide an 80-90% reduction in biofilm mass and >99% killing of Candida albicans and Escherichia coli cells in 3-day mature biofilms at 2 × MIC as well as steadily low hemolytic toxicity. The influence of amphiphilicity and charge density of polysulfonium homopolymers on their antimicrobial activity against planktonic microbes and mature biofilms was investigated to provide insights for effective antimicrobial polymer design.

Facile preparation of well-defined AB2 Y-shaped miktoarm star polypeptide copolymer via the combination of ring-opening polymerization and click chemistry.

Well-defined AB2 Y-shaped miktoarm star polypeptide copolymer, PZLL-b-(PBLG)2, was synthesized via a combination of ring-opening polymerization (ROP) of alpha-amino acid N-carboxyanhydride (NCA) and click chemistry, where PZLL is poly(epsilon-benzyloxycarbonyl-L-lysine) and PBLG is poly(gamma-benzyl-L-glutamate). First, two types of primary-amine-containing initiators, N-aminoethyl 3,5-bis(propargyloxyl)-benzamide and 3-azidopropylamine, were synthesized and employed for the ROP of NCA, leading to the formation of dialkynyl-terminated PZLL and azide-terminated PBLG, dialkynyl-PZLL and PBLG-N3, respectively. The subsequent copper(I)-catalyzed cycloaddition reaction between dialkynyl-PZLL and slightly excess PBLG-N3 led to facile preparation of PZLL-b-(PBLG)2 Y-shaped miktoarm star polypeptide copolymer. The excess PBLG-N3 was scavenged off by reacting with alkynyl-functionalized Wang resin. The obtained Y-shaped miktoarm star polypeptide copolymer was characterized by gel permeation chromatograph (GPC), Fourier transform-infrared spectroscopy (FT-IR), and (1)H NMR. Moreover, after the hydrolysis of protecting benzyl and benzyloxycarbonyl groups of PZLL-b-(PBLG)2, water-soluble pH-responsive Y-shaped miktoarm star polypeptide copolymer, PLL-b-(PLGA)2, was obtained, where PLL is poly(L-lysine) and PLGA is poly(L-glutamic acid). It can self-assemble into PLGA-core micelles at acidic pH and PLL-core micelles at alkaline pH, accompanied with the coil-to-helix transition of PLGA and PLL sequences, respectively. The spontaneous pH-responsive supramolecular assembly of PLL-b-(PLGA)2 miktoarm star polypeptide copolymer has been investigated via a combination of (1)H NMR, laser light scattering (LLS), transmission electron microscopy (TEM), and circular dichroism (CD) spectroscopy.

"Schizophrenic" micellization associated with coil-to-helix transitions based on polypeptide hybrid double hydrophilic rod-coil diblock copolymer.

A polypeptide hybrid double hydrophilic diblock copolymer (DHBC), poly( N-isopropylacrylamide)- b-poly( l-glutamic acid) (PNIPAM- b-PLGA), was synthesized via the ring-opening polymerization of gamma-benzyl- l-glutamate N-carboxyanhydride (BLG-NCA) using monoamino-terminated PNIPAM as the macroinitiator, followed by deprotection of benzyl groups under alkaline conditions. Containing a thermoresponsive PNIPAM block and a pH-responsive PLGA block, the obtained polypeptide hybrid diblock copolymer molecularly dissolves in aqueous solution at alkaline pH and room temperature but supramolecularly self-assembles into PNIPAM-core micelles at alkaline pH and elevated temperatures and PLGA-core micelles at acidic pH and room temperature accompanied with coil-to-helix transition of the PLGA sequence. The pH- and thermoresponsive "schizophrenic" micellization behavior of PNIPAM- b-PLGA diblock copolymer has been investigated by (1)H NMR, optical transmittance, fluorescence probe measurement, transmission electron microscopy (TEM), dynamic and static laser light scattering (LLS), and circular dichroism (CD) spectroscopy. Moreover, the micellization process was investigated employing stopped-flow light scattering technique. The pH-induced micelle growth of PNIPAM- b-PLGA in aqueous solution exhibits drastically different kinetics compared to that of conventional pH-responsive DHBCs, probably due to the stabilization effects exerted by the formed alpha-helix secondary structures within the PLGA core at low pH. Exhibiting "schizophrenic" micellization, the polypeptide sequence of PNIPAM- b-PLGA can either locate within micelle cores or stabilizing coronas. The incorporation of polypeptide block into DHBCs can endow them with structural versatility, tunable spatial arrangement of chain segments within self-assembled nanostructures, and broader applications in the field of biomedicines.

Designing functionalizable hydrogels through thiol-epoxy coupling chemistry.

A novel and modular strategy has been developed for the preparation of reactive and functionalized hydrogels. In this strategy, thiol-epoxy coupling chemistry was employed for the formation of a hydrophilic network. The hydroxyl groups, generated during the coupling process, were then engaged in anchoring a fluorescent probe to the hydrogel scaffold.