Double Cross-Linked Hydrogel Dressings Based on Triblock Copolymers Bearing Antifreezing, Antidrying, and Inherent Antibacterial Properties.

Bacterial infections typically invade the living tissue of wounds, thereby aggravating the inflammatory response, delaying wound healing, or causing further complications. In this paper, the antibacterial hydrogel (PNVBA) with antifreezing and antidrying properties was prepared by a two-step method using N-isopropylacrylamide (NIPAM), 1-butyl-3-vinylimidazolium bromide (VBIMBr), and 3-acrylamidophenylboronic acid (AAPBA). PNVBA hydrogels exhibited a high adsorption capacity of 280 mg·g-1 for bovine serum albumin (BSA) and can adhere to the surface of different materials through ion-dipole or hydrogen-bonding interactions. Meanwhile, the PNVBA hydrogels exhibited high viscoelasticity and good adhesion after freezing at -20 °C or heating at 70 °C for 24 h with a sterilizing rate of up to 98% against multidrug-resistant (MDR) Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA). Moreover, a survival rate of up to 90% after incubation with L929 cells over 24 h was observed. Therefore, this inherent antibacterial hydrogel can be used as an excellent alternative material for wound dressings.

Stimuli-Responsive Materials from Ferrocene-Based Organic Small Molecule for Wearable Sensors.

Stimuli-responsive crystals capable of energy conversion have emerged as promising materials for smart sensors, actuators, wearable devices, and robotics. Here, a novel ferrocene-based organic molecule crystal (Fc-Cz) that possesses anisotropic piezoelectric, optical, and mechanical properties is reported. It is demonstrated that the new crystal Fc-Cz can be used as an ultrasensitive piezoelectric material in fabricating strain sensors. The flexible sensor made of crystal Fc-Cz can detect small strains/deformations and motions with a fast response speed. Analysis based on density functional theory (DFT) indicates that an external pressure can affect the dipole moment by changing the molecular configuration of the asymmetric single crystal Fc-Cz in the crystalline state, leading to a change of polarity, and thereby an enhanced dielectric constant. This work demonstrates a new artificial organic small molecule for high-performance tactile sensors, indicating its great potential for developing low-cost flexible wearable sensors.

Pd-Immobilized Schiff Base Double-Layer Macrocycle: Synthesis, Structures, Peroxidase Mimic Activity, and Antibacterial Performance.

Di-, tri-, and tetra-aldehydes have been employed to access new [2 + 2] [2 + 3] and [2 + 4] double-layer Schiff base macrocycles. The [2 + 3] compound has been used for the immobilization of Pd and the resulting composite has been employed as a peroxidase-like mimetic using 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate; the optimum conditions together with the catalytic kinetics of the enzyme-like activity is discussed. Based on the peroxidase-like catalytic activity, the Pd@Schiff base composite was found to exhibit excellent bactericidal activity against both Escherichia coli (Gram-negative bacterium) and Staphylococcus aureus (Gram-positive bacterium) in the presence of relatively low concentrations of H2O2. Furthermore, cytotoxicity measurements illustrate the biosafety of the Pd composite. The above-mentioned findings have the potential to guide the innovation of new Pd-based composites as enzyme mimetics and antibacterial materials.

Comparative assessment of marine weathering of ROP-derived biopolymers against conventional plastics.

Bio-based plastics were designed to replace single-use plastics and to cause less post-consumer environmental damage. This paper assesses the weathering of four bio-based polymers created by ring opening polymerization (ROP) promoted by a previously reported Ti-based catalyst, to detect any problems before production was scaled up. Samples were aged in seawater to identify degradation products and monitor structural changes. Surfaces evidenced degradation and a range of leaching products was observed. Aside from compounds used in the preparation of the plastics (i.e. residual monomers and benzyl alcohol), the degradation products included carboxylic acids (often found in plastic leachate), oxacyclohexadecan-2-one (potentially toxic to aquatic life) and triphenylmethane (potential carcinogen). Overall, there were fewer structural changes in the fossil fuel based polymer (PS) and in the commercially available bio-based plastic studied for comparison purposes than the lab based bio-based polymers.

Multinuclear alkylaluminium macrocyclic Schiff base complexes: influence of procatalyst structure on the ring opening polymerisation of epsilon-caprolactone.

Two remote dialkylaluminium centres supported by a macrocyclic Schiff base ligand exhibited beneficial cooperative effects, whilst aluminoxane-type bonding proved to be detrimental to activity for the ring opening polymerisation of epsilon-caprolactone.

Early transition metal complexes bearing a C-capped tris(phenolate) ligand incorporating a pendant imine arm: synthesis, structure, and ethylene polymerization behavior.

The ligand 3-[2,2'-methylenebis(4,6-di- tert-butylphenol)-5- tert-butylsalicylidene-(2,6-diisopropyl)phenylimine] (L(1)H 3) was reacted with MCl 4 (M = Ti, Zr) or MCl 5 (M = Nb, Ta) to give complexes of the type [MCl 2(L(1)H 2) 2] (M = Ti (1); Zr (2)), [NbCl 3( L (1)H)] (3), or [TaCl 4(L(1)H 2)] (4), respectively. Single crystal X-ray diffraction of 1- 4 revealed common "iminium" species resulting in zwitterionic complexes. Reaction of [V(N p-tol)(O n-Pr) 3] with L (1)H3 afforded [{(VN p-tol)(L(1)H)} 2(mu-O n-Pr)2] (5), and a second complex [(VO) 2(mu-O)(L(3)H) 2] (6)(L(3)H being derived from 3-[2,2'-methylenebis(4,6-di-tert-butylphenol)-5-tert-butylsalicylidene- p-tolylimine]). The condensation reaction between 3-[2,2'-methylenebis(4,6-di-tert-butylphenol)-5-tert-butyl-2-hydroxybenzaldehyde] (L(0)H 3) and o-phenylenediamine (1,2-diaminobenzene) afforded two products: a pseudo-16-membered hydrogen bonded macrocyclic structure {1,2-bis-3-[2,2'-methylenebis(4,6-di-tert-butylphenol)-5-tert-butylsalicylidene-benzyldiimine]} (L(5)H6), or the benzimidazolyl bearing ligand (L(6)H 3). The reaction of L (5)H6 or L(6)H 3 with [VO(O n-Pr) 3] under varying conditions produced the complexes [(VO)(L(5)H 4)] (7), [(VO) 2(L(5)H)] (8), or [VO(L(6)H 2) 2] (9). L (0)H 3 was reacted with a number of anilines to give the proligands {3-[2,2'-methylenebis(4,6-di- tert-butylphenol)-5-tert-butylsalicylidene-R-imine]}, where R = NC 6H 5 (L(2)H3), NC 6H 4-Me (L(3)H 3), and NC 6H 2-Me 3 (L(4)H 3). Reactions of these ligands with [VO(O n-Pr) 3] formed bischelating complexes of the form [(VO)(L(2-4)H 2)2] (10, 11, and 12, respectively). The reaction of L (1)H 3 with trimethylaluminum led to a bis-aluminum complex {(AlMe 2)[AlMe(NCMe)] L (1)} (13). The ability of complexes 1-12 to polymerize ethylene in the presence of an organoaluminum cocatalyst was investigated. Procatalysts 1 and 2 were found to produce negligible activities in the presence of dimethylaluminum chloride (DMAC) and the reactivator ethyltrichloroacetate (ETA), whereas 3 and 4 were found to be completely inactive for polymerization using a variety of different organoaluminum cocatalysts. Using the combination of DMAC and ETA, complexes 5-12 were found to be highly active catalysts; in all cases, the polymer formed was of high molecular weight linear polyethylene.

Dimethylaluminium aldiminophenolates: synthesis, characterization and ring-opening polymerization behavior towards lactides.

The stoichiometric reaction of the salicylaldimine derivatives (L1-L12) with trimethylaluminium afforded the corresponding dimethylaluminium aldiminophenolates (C1-C12), which were fully characterized by NMR spectroscopy and elemental analysis. The molecular structures of the representative complexes C1, C6, and C8 were determined by the single-crystal X-ray diffraction, which revealed distorted tetrahedral geometry at aluminium. Activation of the dimethylaluminium aldiminophenolates for the ring-opening polymerization required one equivalent of BnOH. On the basis of the polymerization results for L-lactide, D-lactide or rac-lactide, higher efficiency was observed for the ROP of D-lactide, and the nature of the ligands present significantly affected the observed catalytic activities and the properties of the resultant polylactides.

Iron(III) and zinc(II) calixarene complexes: synthesis, structural studies, and use as procatalysts for epsilon-caprolactone polymerization.

Treatment of the heterobimetallic iron(II) alkoxides [(THF)MFe(OtBu)(3)](2) with p-tert-butylcalix[4]areneH(4) (L(1)H(4)) affords the oxo-bridged diiron(III) complexes {Fe[M(NCMe)(x)](2)L(1)}(2)(mu-O), M = Na, x = 2 1 x 8(CH(3)CN), M = K, x = 3 2 x 3.5(CH(3)CN); similar use of p-tert-butylcalix[6]areneH(6) (L(2)H(6)) afforded [{Fe(2)(mu-O)Na(2)(OH(2))(NCMe)(2)L(2)}(2)][{Fe(2)(mu-O)Na(OH(2))(NCMe)(6)L(2)}(2)](2-)[Na(NCMe)(5)](2)(2+) 3 x 9.46(CH(3)CN) and [{Fe(2)(mu-O)L(2)(K(NCMe)(2))(2)}(2)] 4 x 10.8(MeCN), respectively. In the case of 4, a minor product {(L(2)(2)Fe(8)O(8))[K(NCMe)(1.5)K(H(2)O)(NCMe)(2.5)](2)} 5 x 6(CH(3)CN), which is comprised of chains of (L(2)(2)Fe(8)O(8)) clusters bridged by K/MeCN fragments, is also isolated. Use of p-tert-butylcalix[8]areneH(8) (L(3)H(8)) and two equivalents of [(THF)KFe(OtBu)(3)](2) affords [(K(2)(mu-NCCH(3))(4)(mu-OH(2)))(2)(Fe(2)(mu-O)L(3)H(2))(2)(CH(3)CN)(2)] 6 x 9(CH(3)CN). In the case of p-tert-butyltetrahomodioxacalix[6]areneH(6) (L(4)H(6)), reaction with [(THF)MFe(OtBu)(3)](2) (two equivalents) leads to isolation of the pseudoisomorphic complexes [M(2)(CH(3)CN)(4)L(4)Fe(2)(mu-O)] x 4 CH(3)CN M = Na 7 x 4(CH(3)CN), M = K 8 x 2(CH(3)CN); similar use of p-tert-butylhexahomotrioxacalix[3]areneH(3) (L(5)H(3)) led to [Na(2)Fe(2)(mu-OH)(2)(L(5))(2)(CH(3)CN)(4)] 9 x 2(CH(2)Cl(2)). The complex [L(4)(ZnEt)(4)Zn(2)(CH(3)CN)(4)(mu-OEt)(2)], 10 x 2(CH(3)CN), isolated from the reaction of L(4)H(6) and ZnEt(2) is also reported. Complexes 1-10 are structurally characterized (partially in the case of 4) and screened (not 5) as catalysts for the ring opening polymerization of epsilon-caprolactone.

Niobium- and tantalum-based ethylene polymerisation catalysts bearing methylene- or dimethyleneoxa-bridged calixarene ligands.

Treatment of p-tert-butylcalix[6]areneH(6) (H(6)tBu-L) or p-tert-butylcalix[8]areneH(8) (H(8)tBu-L(1)) with [MCl(5)] (M=Nb, Ta) in refluxing toluene or dichloromethane affords, after work-up, the complexes [{M(NCMe)Cl(2)}(2)(tBu-L)] (M=Nb (1), Ta (2)) and [(MCl(2))(2)(tBu-L(1)H(2))] (M=Nb (4), Ta (5)), respectively. Complex 1, as well as [{Nb(2)(mu-O)(2)(mu-Cl)(tBu-LH)}(2)] (3), is also available from [NbOCl(3)] and H(6)tBu-L. Reaction of [MOCl(3)] (M=Nb, Ta) with Li(3)(tBu-L(2)) in diethyl ether, where H(3)tBu-L(2) is p-tert-butylhexahomotrioxacalix[3]areneH(3), affords, after work-up, the trimeric complexes [{M(tBu-L(2))(mu-O)}(3)] (M=Nb (6), Ta (7)). The behaviour of 1 to 7 (not 3), as well as the known complexes [{(MCl)p-tert-butylcalix[4]arene}(2)] (M=Nb (8), Ta (9)) and [(MCl(2))p-tert-butylcalix[4]arene(OMe)] (M=Nb (10), Ta (11)), as pro-catalysts for the polymerisation of ethylene has been investigated. In the presence of dimethyl (or diethyl)aluminium chloride, methylaluminoxane or trimethylaluminium, these niobium and tantalum procatalysts are all active (<35 g mmol(-1) h(-1) bar(-1)), for the polymerisation of ethylene affording high-molecular-weight linear polyethylene. The dimethyleneoxa-bridged systems (derived from 6 and 7) are more active (84 and 46 g mmol(-1) h(-1) bar(-1), respectively) than the methylene-bridged systems. The molecular structures of 1-6 and 10 (acetonitrile solvate) are reported.