Proanthocyanidin Tetramers and Pentamers from Cinnamomum verum Bark and Their Dentin Biomodification Bioactivities.

To enable the further exploration of structure-activity relationships (SARs) of proanthocyanidins (PACs) with dentin biomodification abilities, Cinnamomum verum was selected for scaled-up purification of mixed A-/B-type, medium-size PAC oligomers. Sequential purification by centrifugal partition chromatography (CPC), Sephadex LH-20, and semiprep HPLC chromatography yielded four underivatized tetrameric (5-8) and two pentameric (9-10) PACs. Their unambiguous structural characterization involved extensive spectral and chemical degradation approaches to show that epicatechin units are connected by plant-specific combinations of doubly linked A- and singly linked B-type interflavanyl bonds. The biomechanical properties (via dynamic mechanical analysis) and physicochemical structure (via infrared spectroscopy) were assessed to evaluate the biomodification potency of PAC-treated collagen in a preclinical dentin model. This study revealed that (4→8) versus (4→6) bonds in PAC interflavan linkages have limited influence on biomechanical outcomes of dentin. By exhibiting a 25-fold increase in the complex modulus of treated dentin compared to control, aesculitannin E (5) was found to be the most potent PAC known to date for enhancing the mechanical properties of dentin in this preclinical model.

Seco B-Type Oligomers from Pinus massoniana Expand the Procyanidin Chemical Space and Exhibit Dental Bioactivity.

Investigation of a pine bark extract for bioactive proanthocyanidin oligomers resulted in the isolation of structurally related dimeric seco B-type procyanidin derivatives, 1-5. This includes scalemic mixtures of gambiriin A1 (1a) and A2 (2a) and their newly described optical antipodes, ent-gambiriin A1 (1b) and ent-gambiriin A2 (2b), respectively, as well as a racemic mixture of the newly described (ent-)gambiriin A5 (3a/3b). Furthermore, the study now fully characterizes the previously reported optically pure dimers gambiriin B1 (4) and gambirflavan D1 (5), and characterized the novel seco B-type procyanidin trimer, 6 (gambirifuran C1). Thermal conversion of catechin in aqueous solution provided further evidence for the structures of 1-6 and led to the purification of semisynthetic 1a and 2a as well as additional dimers 7-10. Elucidating the structures of the natural dimers, 1-5, from comprehensive NMR and ECD data and synthetic evidence provided crucial reference points for establishing the structure of the seco B-type procyanidin trimer, 6. Serving as assigned building blocks, data from the dimers supported the 3D structural assignment of 6 based on NMR substituent chemical shift differences (s.c.s., syn. ΔδC) and component-based empirical ECD calculations. Within the newly characterized series of PAC-related molecules, 5 exhibited high dentin biomodification potential. In addition, considering the nomenclature issues and plausible biosynthetic pathways of this group of compounds led to a consolidated nomenclature of all currently known seco B-type procyanidins. These findings, thereby, expand the chemical space of bioactive catechin oligomers, which have promise as agents for the natural enhancement of dental biomaterials. Finally, the current knowledge of the chemical space of seco B-type procyanidin derivatives was compiled to the level of absolute configuration.

Tri- and Tetrameric Proanthocyanidins with Dentin Bioactivities from Pinus massoniana.

Guided by dentin biomechanical bioactivity, this phytochemical study led to the elucidation of an extended set of structurally demanding proanthocyanidins (PACs). Unambiguous structure determination involved detailed spectroscopic and chemical characterization of four A-type dimers (2 and 4-6), seven trimers (10-16), and six tetramers (17-22). New outcomes confirm the feasibility of determining the absolute configuration of the catechol monomers in oligomeric PACs by one-dimensional (1D) and two-dimensional (2D) NMR. Electronic circular dichroism as well as phloroglucinolysis followed by mass spectrometry and chiral phase high-performance liquid chromatography (HPLC) analysis generated the necessary chiral reference data. In the context of previously reported dentin-bioactive PACs, accurately and precisely assigned 13C NMR resonances enabled absolute stereochemical assignments of PAC monomers via (i) inclusion of the 13C NMR γ-gauche effect and (ii) determination of differential 13C chemical shift values (ΔδC) in comparison with those of the terminal monomer (unit II) in the dimers 2 and 4-6. Among the 13 fully elucidated PACs, eight were identified as new, and one structure (11) was revised based on new knowledge gained regarding the subtle, stereospecific spectroscopic properties of PACs.

Surface treatment of dental porcelain: CO2 laser as an alternative to oven glaze.

This work tested continuous CO2 laser as a surface treatment to dental porcelain and compared it to oven glaze (auto-glaze) by means of roughness and color parameters. Three commercial veneering porcelains with different crystalline content were tested: VM7, VM9, and VM13. Porcelain discs (3.5 × 2.0 mm, diameter × height) were sintered and had one side ground by a diamond bur (45 µm) simulating a chairside adjustment in a clinical office. Specimens (n = 7) were divided into the following groups: C--control (no treatment), G--auto-glaze (oven), and L--surface continuous irradiation with CO2 laser (Gem Laser, Coherent; λ = 10.6 µm). Laser was tested in three exposure times (3, 4, or 5 min) and two irradiances (45 and 50 W/cm(2)). Roughness parameters (Ra, Rz, and Rpm/Rz) were measured using a rugosimeter (Surftest 301, Mitutoyo). Color differences (ΔE) between the G and L groups were calculated (VITA Easyshade); ΔE values up to 3.3 were considered as not perceivable. A surface analysis was conducted by stereomicroscopy (Olympus SZ61) and SEM (Stereoscan 440, LEO). Crystalline content of specimens from groups C and L (50 W/cm(2), 5 min) was assessed by X-ray diffraction and then compared. Surface roughness (Ra and Rz) observed for laser-irradiated groups was similar to G for all studied porcelains. Rpm/Rz ratios were near 1.0 for all groups that indicated a sharp ridge profile for all specimens. Only one laser condition studied (50 W/cm(2), 3 min) from VM7 porcelain resulted in color difference (ΔE = 3.5) to G. Specimens irradiated with 50 W/cm(2) for 5 min presented the smoother surface observed by SEM, comparable to G. X-ray diffraction data revealed an increase in leucite crystallite size for VM9 and VM13 porcelains after laser treatment. Regarding roughness, continuous CO2 laser applied on porcelain surface was as effective as conventional oven auto-glaze.

Comparison of collagen features of distinct types of caries-affected dentin.

OBJECTIVES: To compare the biodegradability, mechanical behavior, and physicochemical features of the collagen-rich extracellular matrix (ECM) of artificial caries-affected dentin (ACAD), natural caries-affected dentin (NCAD) and sound dentin (SD). METHODS: Dentin specimens from human molars were prepared and assigned into groups according to the type of dentin: ACAD, NCAD, or SD. ACAD was produced by incubation of demineralized SD with Streptococcus mutans in a chemically defined medium (CDM) with 1% sucrose for 7 days at 37 °C under anaerobic conditions. Specimens were assessed to determine collagen birefringence, biodegradability, mechanical behavior, and chemical composition. Data were individually processed and analyzed by ANOVA and post-hoc tests (α = 0.05). RESULTS: CDM-based biofilm challenge reduced loss, storage, and complex moduli in ACAD (p < 0.001), while the damping capacity remained unaffected (p = 0.066). Higher red and lower green birefringence were found in ACAD and NCAD when compared with SD (p < 0.001). Differently to ACAD, SD and NCAD presented higher biodegradability to exogenous proteases (p = 0.02). Chemical analysis of the integrated areas of characteristic bands that assess mineral quality (carbonate/phosphate and crystallinity index), mineral to matrix (phosphate/amide I) and post-translational modifications (amide III/CH2, pentosidine/CH2, and pentosidine/amide III) (p<0.05) showed that NCAD was significantly different from SD while ACAD exhibited intermediate values. CONCLUSIONS: CDM-based biofilm challenge produced a dentin ECM with decreased mechanical properties and increased collagen maturity. The compositional and structural conformation of the ACAD suggested that CDM-based biofilm challenge showed potential to produce artificial lesions by revealing a transitional condition towards mimicking critical features of NCAD. CLINICAL SIGNIFICANCE: This study highlights the importance of developing a tissue that mimics the features of natural caries-affected dentin ECM for in vitro studies. Our findings suggested the potential of a modified biofilm challenge protocol to produce and simulate a relevant substrate, such as caries-affected dentin.

B-type Proanthocyanidins with Dentin Biomodification Activity from Cocoa (Theobroma cacao).

To enable translational studies, a scalable preparative isolation scheme was developed for underivatized cocoa (Theobroma cacao) proanthocyanidins (PACs), affording six all-B-type oligomeric PACs, including a new tetramer 4. Their structures, including absolute configuration, were unambiguously established by comprehensive spectroscopic and chemical methods. Evaluation of the PACs' dentin biomodification properties employed dynamic mechanical and infrared spectroscopic analyses in dentin bioassay models. PAC treatment enhanced the biomechanical strength of dentin by 5- to 15-fold compared to untreated dentin. Among the PAC agents, the pentamer, cinnamtannin A3 (6), led to the highest complex modulus value of 131 MPa, whereas the "branched" tetramer, 4, showed the lowest, yet still significant bioactivity. This study of specifically singly linked medium-length oligomeric PACs indicates that the linkage site is paramount in determining the potency of these PACs as dentin biomodifiers.

Paradoxical effects of galloyl motifs in the interactions of proanthocyanidins with collagen-rich dentin.

Plant-derived proanthocyanidins (PACs) mediate physicochemical modifications to the dentin extracellular matrix (ECM). The structure-activity relationships of PACs remain largely unknown, mostly due to the varied complex composition of crude extracts, as well as the challenges of purification and mechanistic assessment. To assess the role of galloylated PACs as significant contributors to high yet unstable biomodification activity to the dentin ECM, we removed the galloyl moieties (de-galloylation) via enzymatic hydrolysis from three galloyl-rich PAC-containing extracts (Camellia sinensis, Vitis vinifera, and Hamamelis virginiana). The biomechanical and biological properties of dentin were assessed upon treatment with these extracts vs. their de-galloylated counterparts. An increase in the complex modulus of the dentin matrix was found with all extracts, however, the crude extract was significantly higher when compared to the de-galloylated version. Exhibiting the highest content of galloylated PACs among the investigated plants, Camellia sinensis crude extract also exhibited the biggest relapse in mechanical properties after one-month incubation. De-galloylation did not modify the damping capacity of dentin ECM. Moreover, PAC-mediated protection against proteolytic degradation was unaffected by de-galloylation. The de-galloylation experiments confirmed that gallic acid in galloylated rich-PAC extracts drive stronger yet significantly less sustained mechanical effects in dentin ECM.

The stoic tooth root: how the mineral and extracellular matrix counterbalance to keep aged dentin stable.

Aging is a physiological process with profound impact on the biology and function of biosystems, including the human dentition. While resilient, human teeth undergo wear and disease, affecting overall physical, psychological, and social human health. However, the underlying mechanisms of tooth aging remain largely unknown. Root dentin is integral to tooth function in that it anchors and dissipates mechanical load stresses of the tooth-bone system. Here, we assess the viscoelastic behavior, composition, and ultrastructure of young and old root dentin using nano-dynamic mechanical analysis, micro-Raman spectroscopy, small angle X-ray scattering, atomic force and transmission electron microscopies. We find that the root dentin overall stiffness increases with age. Unlike other mineralized tissues and even coronal dentin, however, the ability of root dentin to dissipate energy during deformation does not decay with age. Using a deconstruction method to dissect the contribution of mineral and organic matrix, we find that the damping factor of the organic matrix does deteriorate. Compositional and ultrastructural analyses revealed higher mineral-to-matrix ratio, altered enzymatic and non-enzymatic collagen cross-linking, increased collagen d-spacing and fibril diameter, and decreased abundance of proteoglycans and sulfation pattern of glycosaminoglycans . Therefore, even in the absence of remodeling, the extracellular matrix of root dentin shares traits of aging with other tissues. To explain this discrepancy, we propose that altered matrix-mineral interactions, possibly mediated by carbonate ions sequestered at the mineral interface and/or altered glycosaminoglycans counteract the deleterious effects of aging on the structural components of the extracellular matrix. STATEMENT OF SIGNIFICANCE: Globally, a quarter of the population will be over 65 years old by 2050. Because many will retain their dentition, it will become increasingly important to understand and manage how aging affects teeth. Dentin is integral to the protective, biomechanical, and regenerative features of teeth. Here, we demonstrate that older root dentin not only has altered mechanical properties, but shows characteristic shifts in mineralization, composition, and post-translational modifications of the matrix. This strongly suggests that there is a mechanistic link between mineral and matrix components to the biomechanical performance of aging dentin with implications for efforts to slow or even reverse the aging process.

Surface-Directed Mineralization of Fibrous Collagen Scaffolds in Simulated Body Fluid for Tissue Engineering Applications.

The use of polymer additives that stabilize fluidic amorphous calcium phosphate is key to obtaining intrafibrillar mineralization of collagen in vitro. On the other hand, this biomimetic approach inhibits the nucleation of mineral crystals in unconfined extrafibrillar spaces, that is, extrafibrillar mineralization. The extrafibrillar mineral content is a significant feature to replicate from hard connective tissues such as bone and dentin as it contributes to the final microarchitecture and mechanical stiffness of the biomineral composite. Herein, we report a straightforward route to produce densely mineralized collagenous composites via a surface-directed process devoid of the aid of polymer additives. Simulated body fluid (1×) is employed as a biomimetic crystallizing medium, following a preloading procedure on the collagen surface to quickly generate the amorphous precursor species required to initiate matrix mineralization. This approach consistently leads to the formation of extrafibrillar bioactive minerals in bulk collagen scaffolds, which may offer an advantage in the production of osteoconductive collagen-apatite materials for tissue engineering and repair purposes.

Unveiling structure-activity relationships of proanthocyanidins with dentin collagen.

OBJECTIVE: To elucidate the structure-activity relationships (SARs) of proanthocyanidins (PACs) with type I collagen using sixteen chemically defined PACs with degree of polymerization (DP) 2-6. METHODS: Under a dentin model, the biomimicry of PACs with type I collagen was investigated by dynamic mechanical analysis (DMA) and infrared spectroscopy. The dentin matrix was modified with PACs from Pinus massoniana [monomers (Mon-1 and Mon-2), dimers (Dim-1-Dim-4), trimers (Tri-1-Tri-4), tetramers (Tet-1-Tet-5), and hexamer (Hex-1)]. A strain sweep method in a 3-point bending submersion clamp was used to assess the viscoelastic properties [storage (E'), loss (E"), and complex moduli (E*) and tan δ] of the dentin matrix before and after biomodification. Biochemical analysis of the dentin matrix was assessed with FTIR spectroscopy. Data were statistically analyzed using one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: DP had a significant effect on modified dentin moduli (tetramers ≈ trimers > hexamers ≈ dimers > monomers ≈ control, p < 0.001). Trimers and tetramers yielded 6- to 8-fold increase in the mechanical properties of modified dentin and induced conformational changes to the secondary structure of collagen. Modifications to the tertiary structure of collagen was shown in all PAC modified-dentin matrices. SIGNIFICANCE: Findings establish three key SARs: (i) increasing DP generally enhances biomimicry potential of PACs in modulating the mechanical and chemical properties of dentin (ii) the secondary structure of dentin collagen is affected by the position of B-type inter-flavanyl linkages (4ß â†’ 6 and 4ß â†’ 8); and (iii) the terminal monomeric flavan-3-ol unit plays a modulatory role in the viscoelasticity of dentin.

Rare A-Type, Spiro-Type, and Highly Oligomeric Proanthocyanidins from Pinus massoniana.

An investigation of the dental bioactive proanthocyanidin (PAC) oligomer fractions led to three structurally distinct new PACs (1-3) from pine bark. Pinutwindoublin (1) is the first reported trimer with double A-type interflavanyl linkages (2α→O→5,4α→6 and 2α→O→7,4α→8). Pinuspirotetrin (2) represents the first reported PAC tetramer with a heterodimeric framework consisting of one spiro-type and one A-type dimer. Pinumassohexin (3) was elucidated as a mixed A + B-type hexamer that consists of a peanut-derived tetramer, peanut procyanidin E, and an A-type dimer (5). Compound 3 increased the modulus of elasticity of dentin by an impressive 4.3 times at a concentration of 0.65%.

A dynamic mechanical method to assess bulk viscoelastic behavior of the dentin extracellular matrix.

OBJECTIVES: To develop a protocol for assessment of the bulk viscoelastic behavior of dentin extracellular matrix (ECM), and to assess relationships between induced collagen cross-linking and viscoelasticity of the dentin ECM. METHODS: Dentin ECM was treated with agents to induce exogenous collagen cross-linking: proanthocyanidins (PACs) from Vitis vinifera - VVe, PACs from Pinus massoniana - PMe, glutaraldehyde - (GA), or kept untreated (control). A dynamic mechanical strain sweep method was carried out in a 3-point bending submersion clamp at treatment; after protein destabilization with 4 M urea and after 7-day, 6-month, and 12-month incubation in simulated body fluid. Tan δ, storage (E'), loss (E"), and complex moduli (E*) were calculated and data were statistically analyzed using two-way ANOVA and post-hoc tests (α = 0.05). Chemical analysis of dentin ECM before and after protein destabilization was assessed with ATR-FTIR spectroscopy. RESULTS: Significant interactions between study factors (treatment vs. time points, p < 0.001) were found for all viscoelastic parameters. Despite a significant decrease in all moduli after destabilization, PAC-treated dentin remained statistically higher than control (p < 0.001), indicating permanent mechanical enhancement after biomodification. Covalently crosslinked, GA-treated dentin was unaffected by destabilization (p = 0.873) and showed the lowest damping capacity (tan δ) at all time points (p < 0.001). After 12 months, the damping capacity of PMe and VVe groups decreased significantly. Changes in all amide IR resonances revealed a partial chemical reversal of PAC-mediated biomodification. SIGNIFICANCE: Viscoelastic measurements and IR spectroscopy aid in elucidating the role of inter-molecular collagen cross-linking in the mechanical behavior of dentin ECM.

Failure of tooth eruption and brachydactyly in pseudohypoparathyroidism are not related to plasma parathyroid hormone-related protein levels.

BACKGROUND: Pseudohypoparathyroidism (PHP) is a genetic disorder characterized by resistance to the peripheral action of PTH due to maternally inherited heterozygous inactivating mutations in the coding sequence of Gsα or intronic regions of GNAS leading to aberrant splice variants (PHP1A), or methylation defects at GNAS (PHP1B). Brachydactyly is a clinical feature associated with both PHP1A and PHP1B, although it is more frequent in PHP1A patients. Loss-of-function mutations in PTHLH, the gene coding for parathyroid hormone related protein (PTHrP) were previously described in some patients with brachydactyly. Primary failure of tooth eruption (PFE) is related to some syndromes involving skeletal development, but it is also known as a nonsyndromic autosomal dominant condition. Previous studies showed that familial nonsyndromic PFE is caused by heterozygous mutations in the gene encoding the G protein-coupled receptor (PTH1R) for PTH and PTHrP. Thus, we hypothesized that PTHrP resistance could result in failure of tooth eruption (FTE) and/or brachydactyly in PHP. SUBJECTS AND METHODS: Nineteen patients with a molecular diagnosis of PHP underwent dental panoramic radiography (DPR), hand radiography and had their PTHrP levels measured. Patients with alterations at DPR were submitted to clinical dental evaluation. RESULTS: Nine patients had FTE and 7 patients had brachydactyly; 4 patients presented both features and none of them presented high PTHrP levels. Fourteen patients had PTHrP levels within the normal range and only one patient had slightly elevated PTHrP levels. Additionally, three novel GNAS mutations were described. CONCLUSION: We described the dental abnormalities in a large series of PHP patients that were followed in a single tertiary center. No relationship between plasma PTHrP levels and failure of tooth eruption, dental manifestations of PHP or brachydactyly was found. It is important that doctors pay attention to dental manifestations of the disease in order to refer patients to a proper care with dentists.

Effect of whitening dentifrices on surface roughness of dental nanofiller-based composites. Stereomycroscopyand AFM analysis / Efeito de dentifrícios clareadores na rugosidade superficial de compósitos de nanoparticulados. Estereomicroscopia e AFM

Objective: the aim of this study was to assess the effects of whitening dentifrices on the surface roughness of three commercial nanofiller-based composite. Material and Methods: two optical analyses were performed: stereomicroscopy and atomic force microscopy (AFM). Disks (8.0 diam. x 2.0 mm thick.) of the nanocomposite Z350 (3M ESPE) and two nano-hybrid composites (EsthetXHD, Dentsply and Premisa, Kerr) were submitted to in vitro brushing (1000 cycles) with three whitening dentifrices (Colgate Luminous White, Oral-B 3D White e Close-Up Diamond Attraction) and a control (Colgate Total12). The results were analyzed by stereomicroscopy and rated according to the following criteria: 0 – no observed roughness, 1 – average roughness, 2 – great roughness. Data was submitted to Kruskall-Wallis non-parametric test followed by Tukey test (p = 0.05). Z350 specimens were assessed by AFM. Results: the surface roughness of composites brushed with whitening dentifrices was statistically higher than the roughness found in specimens brushed with conventional dentifrice. AFM analyses showed that, at a submicrometric scale, there was an increase in the number of peaks and irregularities in specimens brushed with whitening dentifrices. Conclusion: Whitening dentifrices may have an impact on the longevity of dental composites by an increase in its roughness. It is strongly recommended that clinicians guide their patients, warning them about the risks and consequences of their use.

Objetivo: o objetivo deste estudo foi avaliar os efeitos da abrasão produzida por dentifrícios clareadores sobre as superfícies de três marcas comerciais de resinas compostas contendo partículas nanométricas. Materiais e Métodos: A resina nanoparticulada Z350 (3M ESPE) e as resinas nano-híbridas EsthetXHD (Dentsply) e Premisa (Kerr) foram submetidas à escovação in vitro com três diferentes dentifrícios clareadores (Colgate Luminous White, Oral-B 3D White e Close-Up Diamond Attraction). Os espécimes de resina foram confeccionados com 8mm de diâmetro e 2mm de espessura. Foram produzidos 45 corpos de prova para os grupos experimentais e mais 15 espécimes para o grupo controle (dentifrício Colgate Total12). Após a realização de 1.000 ciclos de escovação, os espécimes foram armazenados em saliva artificial. A análise das superfícies escovadas foi obtida por estereomicroscópio. As rugosidades foram mensuradas segundo os critérios: 0 – sem rugosidade, 1 – média rugosidade e 2 – com muita rugosidade. Os dados obtidos foram analisados estatisticamente por teste não-paramétrico de Kruskall-Wallis seguido pelo teste de Tukey (p < 0,05). Os espécimes confeccionados com Z350 foram avaliados por microscopia de força atômica (AFM). Resultados: A rugosidade superficial dos espécimes de resina composta foi estatisticamente maior quando escovados com os dentifrícios clareadores em relação ao dentifrício controle convencional. Análise por AFM demonstrou, em uma escala submicrométrica, um aumento no número de picos na superfície dos espécimes da resina em que foi realizada a escovação com dentifrícios clareadores em comparação com o grupo controle. Conclusão: Os dentifrícios clareadores aumentaram a rugosidade superficial das resinas compostas podendo, assim, diminuir a sua longevidade.

Conhecimentos, práticas e atitudes de médicos e enfermeiros sobre saúde bucal na puericultura na APS / Oral health knowledge, attitudes, and practices of doctors and nurses in the PHC of children

Objetivo: investigar os conhecimentos, as práticas e atitudes em saúde bucal na puericultura de médicos e enfermeiros, contratados e residentes do Serviço de Saúde Comunitária do Grupo Hospitalar Conceição (SSC-GHC). Sujeitos e método: aplicação de um questionário fechado, com 32 questões de múltipla escolha, elaborado pelos pesquisadores, para avaliar os conhecimentos, as práticas e as atitudes (CAP) em saúde bucal na puericultura de médicos e enfermeiros, contratados e residentes, de onze das doze unidades de saúde que compõem o SSC-GHC. A amostra intencional foi composta por 47 médicos e 27 enfermeiros. Os dados foram tabulados e analisados com auxílio do software SPSS, por meio do teste Qui-Quadrado e teste t, ao nível de significância estatística de p<0,05. Resultados: os resultados obtidos mostram que há pouca diferença estatisticamente significativa entre os conhecimentos, práticas e atitudes de médicos e enfermeiros do SSC-GHC, inclusive em relação ao tempo de formação/ prática profissional. Conclusão: ainda há desconhecimento de muitos em relação a alguns pontos sobre a saúde bucal na puericultura, necessitando de ações de educação permanentes sobre o tema.

Sintering dental porcelain with CO2 laser: porosity and mechanical characterization / Sinterização de porcelanas dentárias com o laser de CO2: porosidade e caracterização mecânica

Objective: This study investigated CO2 laser sintering of dental porcelain as an alternative to a conventional furnace by means of porosity, density, fracture toughness and microhardness tests. Methods: Two commercial veneering porcelains were chosen for this study: VM7 and VM9 (VITA Zahnfabrik). 25 porcelain green discs (4.1 mm dia. x 2.4 mm) of each commercial brand were confectioned and divided into 5 groups: a control group (oven-glazed specimens) and 4 groups of specimens sintered by continuous CO2 laser (Coherent, USA – 35 W e λ= 10.6 μm) with different fluences: 6000, 6900, 12000 and 13800 J/cm2. After sintering, the discs had one of their surfaces mirror polished until the final dimension of 3.5 mm x 2.0 mm was achieved. The amount of superficial pores (%) was assessed by the Image J software through images obtained from an optical microscope (Shimadzu - 100x). Apparent density was measured by the Archimedean’s method. Microhardness and fracture toughness (Indentation Fracture - IF) were determined with a Vickers indenter (Shimadzu). Results: Porosity ranged between 4.0 to 5.9% for the irradiated specimens; the control group had 6.0 and 4.7% of porosity for porcelain VM7 and VM9, respectively. The density of the VM7 porcelain irradiated in 13800 J/cm2 fluence was significantly higher than the control group. The microhardness and fracture toughness of the irradiated specimens were similar to the control. The indentation marks of some irradiated groups were not possible to achieve because the surface cracked during the test. Conclusions: Porcelain sintered with CO2 laser in studied fluences produced a material with superficial porosity similar to that obtained in a conventional oven. Depending on the commercial brand and/or the laser fluence, the irradiated specimens presented a density, fracture toughness and microhardness results that differed from the control group.

Objetivo: Este estudo testou o laser de CO2 como um agente de sinterização de porcelanas dentárias e o comparou ao forno convencional por meio das seguintes caracterizações: porosidade, densidade, tenacidade à fratura e microdureza. Materiais e métodos: Duas porcelanas comerciais foram escolhidas para o estudo: VM7 e VM9 (VITA Zahnfabrik). 25 discos (4,1 mm dia. x 2,4 mm) de cada porcelana foram confeccionados e divididos em 5 grupos: 1 grupo controle (espécimes sinterizados no forno) e 4 grupos de espécimes sinterizados pelo laser de CO2 de forma contínua (Coherent, USA – 35 W e λ= 10,6 μm) em diferentes fluências: 6000, 6900, 12000 e 13800 J/cm2. Após a sinterização, os discos tiveram uma de suas faces polidas. A dimensão final dos espécimes foi de 3,5 x 2,0 mm. A contagem de poros superficiais (%) foi feita pelo programa Image J (domínio público) através de imagens obtidas em um microscópio óptico (Shimadzu - 100x). A densidade aparente foi medida por Arquimedes. A microdureza e a tenacidade à fratura (método IF - Indentation Fracture) foram determinadas por um indentador Vickers (Shimadzu). Resultados: A porosidade variou entre 4,0 e 5,9% para os espécimes irradiados; o grupo controle apresentou a porosidade de 6,0 e 4,7% para o grupo controle das porcelanas VM7 e VM9, respectivamente. A densidade da porcelana VM7 irradiada na fluência de 13800 J/cm2 foi significantemente maior do que a observada no grupo controle. A microdureza e a tenacidade à fratura dos espécimes irradiados foram similares ao grupo controle, porém em alguns grupos não foi possível se obter as marcas de indentação devido ao trincamento da superfície, o que inviabilizou o teste. Conclusões: A sinterização com o laser de CO2 produziu uma porcelana com porosidade superficial semelhante àquela obtida em forno convencional. Dependendo da marca comercial ou da fluência do laser, os resultados de densidade, tenacidade à fratura e microdureza diferiram dos do grupo controle

Molecular bacterial diversity and distribution in waste from a steel plant.

We characterized the bacterial diversity of newly produced steelmaking wastes (NPSW) and steelmaking wastes deposited (SWD) in a restricted land area, generated by the siderurgic industry, using the 16S rDNA clone library approach. A total of 212 partial-length sequences were analyzed, revealing 123 distinct operational taxonomic units (OTUs) determined by the DOTUR program to 97% sequence similarity. Phylogenetic analysis of bacterial 16S rDNA sequences from the NPSW and SWD libraries demonstrated that Gammaproteobacteria, Betaproteobacteria, Alphaproteobacteria, Actinobacteria, Planctomycetes, Firmicutes, and Bacteroidetes were represented in both libraries. Deltaproteobacteria, Acidobacteria, Chloroflexi, Deinococcus-thermus, Gemmatimonadetes, and candidate divisions OP10 and OD1 were only present in the SWD library, and Nitrospira was only present in the NPSW library. The abundance of sequences affiliated with Gammaproteobacteria was high in both libraries. Six previously unclassified OTUs may represent novel taxa. Based on diversity indices (Simpson, Shannon-Weaver, Chao1, and ACE), the SWD library had a higher diversity. LIBSHUFF comparisons of the composition of the 2 libraries showed that they were significantly different. These results indicate that the bacterial communities in steelmaking wastes present high phylogenetic diversity and complexity. A possible association between the functional diversity and the bacterial communities' complexity requires further phenotypic investigation.

Conhecimentos, práticas e atitudes de médicos e enfermeiros sobre saúde bucal na puericultura na APS

O presente trabalho teve como objetivo investigar os conhecimentos, as práticas e atitudes em saúde bucal na puericultura de médicos e enfermeiros, contratados e residentes do Serviço de Saúde Comunitária do Grupo Hospitalar Conceição (SSC-GHC). Foi aplicado um questionário fechado, com 32 questões de múltipla escolha, elaborado pelos pesquisadores, para avaliar os conhecimentos, as práticas e as atitudes (CAP) em saúde bucal na puericultura de médicos e enfermeiros, contratados e residentes, de onze das doze unidades de saúde que compõem o SSC-GHC. A amostra intencional foi composta por 47 médicos e 27 enfermeiros. Os dados foram tabulados e analisados com auxílio do software SPSS através do teste qui-quadrado e t teste, ao nível de significância estatística de p< 0,005. Os resultados obtidos mostram que não há diferença estatisticamente significativa entre os conhecimentos, práticas e atitudes de médicos e enfermeiros do SSC-GHC, e nem em relação ao tempo de formação/prática profissional, porém ainda há desconhecimento de muitos em relação a alguns pontos sobre a saúde bucal na puericultura