The oral microbiota and periodontal health in orthodontic patients.

The oral microbiota develops within the first 2 years of childhood and becomes distinct from the parents by 4 years-of-age. The oral microbiota plays an important role in the overall health/symbiosis of the individual. Deviations from the state of symbiosis leads to dysbiosis and an increased risk of pathogenicity. Deviations can occur not only from daily life activities but also from orthodontic interventions. Orthodontic appliances are formed from a variety of biomaterials. Once inserted, they serve as a breeding ground for microbial attachment, not only from new surface areas and crevices but also from material physicochemical interactions different than in the symbiotic state. Individuals undergoing orthodontic treatment show, compared with untreated people, qualitative and quantitative differences in activity within the oral microbiota, induced by increased retention of supra- and subgingival microbial plaque throughout the treatment period. These changes are at the root of the main undesirable effects, such as gingivitis, white spot lesions (WSL), and more severe caries lesions. Notably, the oral microbiota profile in the first weeks of orthodontic intervention might be a valuable indicator to predict and identify higher-risk individuals with respect to periodontal health and caries risk within an otherwise healthy population. Antimicrobial coatings have been used to dissuade microbes from adhering to the biomaterial; however, they disrupt the host microbiota, and several bacterial strains have become resistant. Smart biomaterials that can reduce the antimicrobial load preventing microbial adhesion to orthodontic appliances have shown promising results, but their complexity has kept many solutions from reaching the clinic. 3D printing technology provides opportunities for complex chemical syntheses to be performed uniformly, reducing the cost of producing smart biomaterials giving hope that they may reach the clinic in the near future. The purpose of this review is to emphasize the importance of the oral microbiota during orthodontic therapy and to use innovative technologies to better maintain its healthy balance during surgical procedures.

Volumetric changes in the upper airway on CBCT after dentofacial orthopedic interventions - a systematic review.

OBJECTIVE: To provide a critical overview of the effect of various orthodontic and/or dentofacial orthopedic interventions on three-dimensional volumetric changes in the upper airway. MATERIALS AND METHODS: Four databases were searched for clinical studies concerning 3D volumetric assessments based on CBCT before and after orthodontics interventions. The quality of the studies was assessed using the quality assessment tool of the National Heart, Lung and Blood Institute. After the use of inclusion and exclusion criteria, the pre-and post-treatment volumes were used to visualize the effect of various orthodontics interventions. RESULTS: A total of 48 studies were included in this review and none of which were RCTs. The quality of all included studies was assessed as medium. Overall, there is a tendency for an increase in airway volumes after various orthodontic interventions, except for studies concerning extraction therapy with fixed appliances in adults, in which both increases and decreases in airway volumes have been reported. CONCLUSION: Orthodontic treatment by growth modification and non-extraction therapy with fixed appliances, regardless of the malocclusion, generally showed positive effects on the airway volume. Orthodontic treatment in combination with extractions does not provide an unambiguous insight. A consensus on the methodology of the airway measurement and nomenclature is urgently needed in order to gain insight into the effect of different interventions on three-dimensional airway changes. CLINICAL RELEVANCE: Various orthodontic treatments do not negatively influence the upper airway volume. However, extraction therapy in adults should be chosen with caution, especially in subjects belonging to a group susceptible to airway obstruction.

Three-dimensional volumetric changes in the airway of growing unilateral complete cleft lip and palate patients after bone-anchored maxillary protraction.

INTRODUCTION: This prospective controlled study evaluates volumetric, length, and average cross-sectional area (aCSA) airway changes in growing patients with unilateral complete cleft lip and palate after 1.5 years of bone-anchored maxillary protraction therapy. METHODS: Thirty-five growing unilateral complete cleft lip and palate patients with maxillary deficiency were included (aged 11.3 ± 0.5 years). Cone-beam computed tomography scans were obtained before bone-anchored maxillary protraction (BAMP) therapy and after 1.5 years. A growing group without cleft (n = 18) patients served as a control group at 1.5 years posttreatment (aged 13.1 ± 1.2 years). Volumetric, length, and aCSA changes of the total airway, nasopharynx (NP), middle pharynx, and inferior pharynx airway were evaluated. RESULTS: After 1.5 years of BAMP therapy, a significant increase was observed in the total airway volume and the NP (P <0.01). The middle and inferior pharynx showed an insignificant tendency of volumetric increase. Compared with the control group, a significantly larger airway volume could be observed in the total airway and NP (P <0.05). The aCSA of the NP increased significantly compared with pretreatment. CONCLUSIONS: The total airway and NP volumes significantly increased in growing subjects with cleft lip and palate after 1.5 years of BAMP therapy to a level comparable to a control group without cleft. Volumetric increase in the NP in the BAMP group is mainly attributed to the increase in its cross-sectional area. BAMP can therefore be recommended as an effective therapy for patients with cleft lip and palate with positive effects on airway development.

Class II Division 1 malocclusion treatment with extraction of maxillary first molars: Evaluation of treatment and post-treatment changes by the PAR Index.

OBJECTIVE: To investigate occlusal result and post-treatment changes after orthodontic extraction of maxillary first permanent molars in patients with a Class II division 1 malocclusion. SETTING AND SAMPLE: Retrospective longitudinal study in a private practice, with outcome evaluation by an independent academic hospital. Ninety-six patients (53 males, 43 females) consecutively treated by one orthodontist with maxillary first permanent molar extraction were studied, divided into three facial types, based on pre-treatment cephalometric values: hypodivergent (n = 18), normodivergent (n = 21) and hyperdivergent (n = 57). METHODS: Occlusal outcome was scored on dental casts at T1 (pre-treatment), T2 (post-treatment) and T3 (mean follow-up 2.5 ± 0.9 years) using the weighted Peer Assessment Rating (PAR) Index. The paired sample t test and one-way ANOVA followed by Tukey's post hoc test were used for statistical analysis. RESULTS: PAR was reduced by 95.7% and 89.9% at T2 and T3, respectively, compared with the start of treatment. The largest post-treatment changes were found for overjet and buccal occlusion. Linear regression analysis did not reveal a clear effect (R-Square 0.074) of age, sex, PAR score at T1, incremental PAR score T2-T1, overjet and overbite at T1, and facial type on the changes after treatment (incremental PAR score T3-T2). CONCLUSIONS: The occlusal outcome achieved after Class II division 1 treatment with maxillary first permanent molar extractions was maintained to a large extent over a mean post-treatment follow-up of 2.5 years. Limited changes after treatment were found, for which no risk factors could be discerned.

Thermo-resistance of ESKAPE-panel pathogens, eradication and growth prevention of an infectious biofilm by photothermal, polydopamine-nanoparticles in vitro.

Nanotechnology offers many novel infection-control strategies that may help prevent and treat antimicrobial-resistant bacterial infections. Here, we synthesized polydopamine, photothermal-nanoparticles (PDA-NPs) without further surface-functionalization to evaluate their potential with respect to biofilm-control. Most ESKAPE-panel pathogens in suspension with photothermal-nanoparticles showed three- to four-log-unit reductions upon Near-Infra-Red (NIR)-irradiation, but for enterococci only less than two-log unit reduction was observed. Exposure of existing Staphylococcus aureus biofilms to photothermal-nanoparticles followed by NIR-irradiation did not significantly kill biofilm-inhabitants. This indicates that the biofilm mode of growth poses a barrier to penetration of photothermal-nanoparticles, yielding dissipation of heat to the biofilm-surrounding rather than in its interior. Staphylococcal biofilm-growth in the presence of photothermal-nanoparticles could be significantly prevented after NIR-irradiation because PDA-NPs were incorporated in the biofilm and heat dissipated inside it. Thus, unmodified photothermal nanoparticles have potential for prophylactic infection-control, but data also constitute a warning for possible development of thermo-resistance in infectious pathogens.

Liposomes with Water as a pH-Responsive Functionality for Targeting of Acidic Tumor and Infection Sites.

A lipid named DCPA was synthesized under microwave-assisted heating. DCPA possesses a pyridine betaine, hydrophilic group that can be complexed with water through hydrogen bonding (DCPA-H2 O). DCPA-H2 O liposomes became protonated relatively fast already at pH<6.8, due to the high HOMO binding energy of DCPA-H2 O. In murine models, DCPA-H2 O liposomes had longer blood circulation times than natural DPPC or cationic DCPM liposomes, while after tail-vein injection DCPA-H2 O liposomes targeted faster to solid tumors and intra-abdominal infectious biofilms. Therapeutic efficacy in a murine, infected wound-healing model of tail-vein injected ciprofloxacin-loaded DCPA-H2 O liposomes exceeded the ones of clinically applied ciprofloxacin as well as of ciprofloxacin-loaded DPPC or DCPM liposomes.

Head positioning in a cone beam computed tomography unit and the effect on accuracy of the three-dimensional surface mode.

Head position during cone beam computed tomography (CBCT) examination can easily deviate from the ideal, which may affect the accuracy of the segmented three-dimensional (3D) model. The aim of this study was to determine the effect of head positioning on the accuracy of the 3D model. A human dry skull was positioned at predetermined orientations in a CBCT scanner and scanned in multiple orientations and voxel sizes. The resulting 3D surface models were superimposed over those derived from the reproducible centered positioned skull with 0° inclination. Color mapping and analysis of the differences expressed by the root mean square error (RMSE) were performed. The RMSE for each orientation using the 0.3 mm voxel ranged from 0.31 to 0.87 mm for the whole maxillofacial region, from 0.44 to 0.91 mm in the maxilla, and from 0.31 to 0.72 mm in the mandible. For the 0.4 mm voxel, the RMSE ranged from 0.47 to 0.86 mm for the whole maxillofacial region, from 0.60 to 0.96 mm in the maxilla, and from 0.56 to 0.86 mm in the mandible. The maxilla showed a slightly higher deviation than the mandible in both voxel groups. It can be concluded that the head position affects the accuracy of the segmented 3D model, but the inaccuracy does not exceed clinically relevant levels.

Bone-anchored maxillary protraction in patients with unilateral complete cleft lip and palate and Class III malocclusion.

OBJECTIVE: This prospective controlled study evaluated the effect of bone-anchored maxillary protraction therapy in cleft children with Class III malocclusion using CBCT-derived 3D surface models. MATERIALS AND SUBJECTS: Eighteen cleft patients between 10 and 12 years old were included. Intermaxillary elastics were worn after the placement of four zygoma bone plates for 18 months. Uniquely, three age-matched untreated groups including both cleft subjects and non-cleft subjects with Class III malocclusion served as controls. Profile photos and CBCT scans for each patient were taken before (T0) and 18 months after the protraction (T1). 3D measurements were made on CBCT surface models from the treatment group using tomographic color mapping method. Cephalometric measurements were made on lateral cephalogram reconstructed from the CBCT scans and were compared with those obtained from the control groups. RESULTS: Two thirds of the treatment subjects showed improved lip projection towards more convex facial profile. The most significant skeletal changes on 3D surface models were observed at the zygomatic regions (mean 1.5-mm forward, downward, and outward displacement) and at the maxillary complex (mean 1.5-mm forward displacement). Compared with the control groups, the treatment subjects showed significant increase in the SNA and ANB angles, increased Wits appraisal, a more forward movement of point A and overjet improvement (p < 0.05). CONCLUSIONS: BAMP in cleft patients gives a significant forward displacement of the zygomaxillairy complex in favor of the Class III treatment. CLINICAL RELEVANCE: This treatment method shows clearly favorable outcome in cleft patients after 1.5 years of BAMP.

Autotransplantation of teeth with incomplete root formation: a systematic review and meta-analysis.

OBJECTIVES: The objective of this systematic review and meta-analysis was to determine the rates of survival and success and the complications related to autotransplantation of teeth with incomplete root formation. Additionally, we attempted to identify the prognostic factors that influence the outcome of tooth autotransplantation. MATERIALS AND METHODS: A literature search for all data published until July 2016 was conducted. Inclusion and exclusion criteria were specified. Risk of bias was assessed with the Newcastle checklist. Meta-analysis was performed by using the DerSimonian-Laird random effect model. The 1-, 5-, and 10-year survival rates and the weighted estimated survival, success, and complication rates per year were calculated. RESULTS: Thirty-two studies were included for analysis. The survival rates reported after 1, 5, and 10 years were 97.4, 97.8, and 96.3%, respectively. The annual weighted estimated survival rate (98.2%), success rate (96.6%), and complication rates in terms of ankylosis (2.0%), root resorption (2.9%), and pulp necrosis (3.3%) were analyzed. No firm conclusions could be drawn with respect to the prognostic factors due to insufficient evidence of high quality. CONCLUSION: The survival and success rates of autotransplantation of teeth with incomplete root formation were high (> 95%), with a low rate of complications (< 5%). CLINICAL RELEVANCE: Current evidence from the literature on autotransplantation of teeth with incomplete root formation shows favorable survival and success rates and low complication rates, indicating it is a reliable treatment option.

Radiographic technique and brackets affect measurements of proximal enamel thickness on mandibular incisors.

OBJECTIVE: To investigate the influence of radiographic film and tube positioning, the presence and the size of brackets on in vitro measurements of proximal enamel thickness of mandibular incisors on periapical radiographs aimed to aid planning of interproximal enamel reduction procedures in orthodontics. MATERIALS AND METHODS: Eighty human mandibular incisors were assigned to sets of four and located in a customized base. Periapical radiographs were taken with the film positioned at three different angles (0°, 2°, and 5°) in relation to the frontal plane and the tube head positioned at five angles (0°, -2°, -5°, +2°, and +5°) in relation to the sagittal plane. The proximal enamel width was calculated by means of computerized image analysis and compared with measurements obtained at 0°. Statistical analysis was carried out to compare the enamel measurements on radiographs made with all angular combinations with and without the presence of brackets of different dimensions. RESULTS: A significant difference (P < 0.05) was found between the measurements of proximal enamel width obtained at the different angles in relation to the frontal and sagittal planes for all sets with or without brackets. The presence of brackets significantly affected the measured width only for the enamel side further away from the radiation source at the sagittal plane (P < 0.05). CONCLUSION: Angular changes in taking periapical radiographs of mandibular incisors and the presence of brackets significantly affect interproximal enamel measurements made with image analysis software.

Treatment comfort, time perception, and preference for conventional and digital impression techniques: A comparative study in young patients.

INTRODUCTION: The aim of this crossover study was to assess perceptions and preferences for impression techniques in young orthodontic patients receiving alginate and 2 different digital impressions. METHODS: Thirty-eight subjects aged 10 to 17 years requiring impressions for orthodontic treatment were randomly allocated to 3 groups that differed in the order that an alginate impressions and 2 different intraoral scanning procedures were administered. After each procedure, the patients were asked to score their perceptions on a 5-point Likert scale for gag reflex, queasiness, difficulty to breathe, uncomfortable feeling, perception of the scanning time, state of anxiety, and use of a powder, and to select the preferred impression system. Chairside time and maximal mouth opening were also registered. RESULTS: More queasiness (P = 0.00) and discomfort (P = 0.02) during alginate impression taking of the maxilla were perceived compared with the scans with the CEREC Omnicam (Sirona Dental Systems, Bensheim, Germany). There were no significant differences in perceptions between the alginate impressions and the Lava C.O.S. (3M ESPE, St Paul, Minn) and between the 2 scanners. Chairside times for the alginate impressions (9.7 ± 1.8 minutes) and the CEREC Omnicam (10.7 ± 1.8 minutes) were significantly lower (P <0.001) than for the Lava C.O.S. (17.8 ± 4.0 minutes). Digital impressions were favored by 51% of the subjects, whereas 29% chose alginate impressions, and 20% had no preference. Regardless of the significant differences in the registered times among the 3 impression-taking methods, the distributions of the Likert scores of time perception and maximal mouth opening were similar in all 3 groups. CONCLUSIONS: Young orthodontic patients preferred the digital impression techniques over the alginate method, although alginate impressions required the shortest chairside time.

Time relevance, citation of reporting guidelines, and breadth of literature search in systematic reviews in orthodontics.

INTRODUCTION: As the importance of systematic review (SR) conclusions relies upon the scientific rigor of methods and the currency of evidence, we aimed to investigate the currency of orthodontic SRs using as proxy the time from the initial search to publication. Additionally, SR information regarding reporting guidelines, registration, and literature searches were recorded when available. MATERIALS AND METHODS: A systematic PubMed search was carried out using the Clinical Queries page to identify orthodontic SRs cited between 1 January 2008 and 7 November 2013. Data related to reporting guidelines, review registration, dates of review processing, literature search, and abstract reporting were retrieved and classified by journal type. Survival analysis was used to assess the time to reach predefined manuscript stages for orthodontic and non-orthodontic journals. RESULTS: One hundred twenty seven of the originally identified 585 SRs were considered eligible. The median interval from search until publication was 13.2 months (interquartile range: IQR = 9.7 months) irrespective of the journal type. There was evidence (P = 0.05) that SRs published by non-orthodontic journals appeared in PubMed faster than in orthodontic journals (non-orthodontic: median = 6.5 months; IQR = 5.7 months; orthodontic: median = 10.2 months; IQR = 5.6 months) from submission to publication and from acceptance to publication (non-orthodontic: median = 1.5 months; IQR = 2.4 months; orthodontic: median = 6.0 months; IQR = 6.2 months; P < 0.001). More than half of these SRs did not cite adherence to any reporting guidelines, whereas all but five studies were not prospectively registered. Search of unpublished research was undertaken in approximately 21 per cent and 29 per cent of the SRs published in non-orthodontic and orthodontic periodicals, respectively. CONCLUSIONS: This study indicates that SR users should be aware that median time for orthodontic SRs from search to publication is 13.2 months. SRs published in non-orthodontic journals are likely to be more current in terms of submission until time to publication and acceptance until time to publication compared with those published in orthodontic journals.

Orthodontic treatment with fixed appliances and biofilm formation--a potential public health threat?

OBJECTIVES: Orthodontic treatment is highly popular for restoring functional and facial esthetics in juveniles and adults. As a downside, prevalence of biofilm-related complications is high. Objectives of this review are to (1) identify special features of biofilm formation in orthodontic patients and (2) emphasize the need for strong concerted action to prevent biofilm-related complications during orthodontic treatment. MATERIALS AND METHODS: Literature on biofilm formation in the oral cavity is reviewed to identify special features of biofilm formation in orthodontic patients. Estimates are made of juvenile and adult orthodontic patient population sizes, and biofilm-related complication rates are used to indicate the costs and clinical workload resulting from biofilm-related complications. RESULTS: Biofilm formation in orthodontic patients is governed by similar mechanisms as common in the oral cavity. However, orthodontic appliances hamper the maintenance of oral hygiene and provide numerous additional surfaces, with properties alien to the oral cavity, to which bacteria can adhere and form a biofilm. Biofilm formation may lead to gingivitis and white spot lesions, compromising facial esthetics. Whereas gingivitis after orthodontic treatment is often transient, white spot lesions may turn into cavities requiring professional restoration. Complications requiring professional care develop in 15 % of all orthodontic patients, implying an annual cost of over US$500,000,000 and a workload of 1,000 full-time dentists in the USA alone. CONCLUSIONS: Improved preventive measures and antimicrobial materials are urgently required to prevent biofilm-related complications of orthodontic treatment from overshadowing its functional and esthetic advantages. CLINICAL RELEVANCE: High treatment demand and occurrence of biofilm-related complications requiring professional care make orthodontic treatment a potential public health threat.

Surgically facilitated orthodontic treatment: a systematic review.

INTRODUCTION: Corticotomy and dental distraction have been proposed as effective and safe methods to shorten orthodontic treatment duration in adolescent and adult patients. A systematic review was performed to evaluate the evidence supporting these claims. METHODS: PubMed, Embase, and Cochrane databases were searched until April 2013 for randomized controlled trials, controlled clinical trials, and case series with 5 or more subjects that focused on velocity of tooth movement, reduction of treatment duration, or complications with various surgical protocols. There were no language restrictions during the search phase. Publications were systematically assessed for eligibility, and 2 observers graded the methodologic quality of the included studies with a predefined scoring system. RESULTS: Eighteen articles met the inclusion criteria. Seven studies were clinical trials, with small investigated groups. Only studies of moderate and low values of evidence were found. Surgically facilitated treatment was indicated for various clinical problems. All publications reported temporarily accelerated tooth movement after surgery. No deleterious effects on the periodontium, no vitality loss, and no severe root resorption were found in any studies. However, the level of evidence to support these findings is limited owing to shortcomings in research methodologies and small treated groups. No research concerning long-term stability could be included. CONCLUSIONS: Evidence based on the currently available studies of low-to-moderate quality showed that surgically facilitated orthodontics seems to be safe for the oral tissues and is characterized by a temporary phase of accelerated tooth movement. This can effectively shorten the duration of orthodontic treatment. However, to date, no prospective studies have compared overall treatment time and treatment outcome with those of a control group. Well-conducted, prospective research is still needed to draw valid conclusions.

Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques.

INTRODUCTION: Rapid prototyping is a fast-developing technique that might play a significant role in the eventual replacement of plaster dental models. The aim of this study was to investigate the accuracy and reproducibility of physical dental models reconstructed from digital data by several rapid prototyping techniques. METHODS: Twelve mandibular and maxillary conventional plaster models from randomly chosen subjects were selected and served as the gold standard. The plaster models were scanned to form high-resolution 3-dimensional surface models in .stl files. These files were converted into physical models using 3 rapid prototyping techniques: digital light processing, jetted photopolymer, and 3-dimensional printing. Linear measurements on the plaster models were compared with linear measurements on the rapid prototyping models. One observer measured the height and width of the clinical crowns of all teeth (first molar to first molar) on all models (plaster and replicas) using a digital caliper. All models were measured 5 times with a 2-week interval between measurements. RESULTS: The intraobserver agreement was high (intraclass correlation coefficient >0.94). The mean systematic differences for the measurements of the height of the clinical crowns were -0.02 mm for the jetted photopolymer models, 0.04 mm for the digital light processing models, and 0.25 mm for the 3-dimensional printing models. For the width of the teeth, the mean systematic differences were -0.08 mm for the jetted photopolymer models, -0.05 mm for the digital light processing models, and -0.05 mm for the 3-dimensional printing models. CONCLUSIONS: Dental models reconstructed by the tested rapid prototyping techniques are considered clinically acceptable in terms of accuracy and reproducibility and might be appropriate for selected applications in orthodontics.

Full-text publication of abstracts presented at European Orthodontic Society congresses.

INTRODUCTION: Empirical evidence has indicated that only a subsample of studies conducted reach full-text publication and this phenomenon has become known as publication bias. A form of publication bias is the selectively delayed full publication of conference abstracts. The objective of this article was to examine the publication status of oral abstracts and poster-presentation abstracts, included in the scientific program of the 82nd and 83rd European Orthodontic Society (EOS) congresses, held in 2006 and 2007, and to identify factors associated with full-length publication. METHODS: A systematic search of PubMed and Google Scholar databases was performed in April 2013 using author names and keywords from the abstract title to locate abstract and full-article publications. Information regarding mode of presentation, type of affiliation, geographical origin, statistical results, and publication details were collected and analyzed using univariable and multivariable logistic regression. RESULTS: Approximately 51 per cent of the EOS 2006 and 55 per cent of the EOS 2007 abstracts appeared in print more than 5 years post congress. A mean period of 1.32 years elapsed between conference and publication date. Mode of presentation (oral or poster), use of statistical analysis, and research subject area were significant predictors for publication success. LIMITATIONS: Inherent discrepancies of abstract reporting, mainly related to presentation of preliminary results and incomplete description of methods, may be considered in analogous studies. CONCLUSIONS: On average 52.2 per cent of the abstracts presented at the two EOS conferences reached full publication. Abstracts presented orally, including statistical analysis, were more likely to get published.

Investigation of bacteremia induced by removal of orthodontic mini-implants.

The aim of this study was to investigate potential occurrence of bacteremia in orthodontic patients after removal of miniscrews.The study group comprised 30 healthy subjects (17 males, 13 females) with a mean age of 24.1 years treated with self-ligating fixed appliances and mini-implant anchorage. Two 20 ml venous blood samples were obtained prior to and 30-60 seconds after miniscrew explantation following an aseptic technique. Blood culturing in aerobic and anaerobic conditions was carried out by means of the BACTEC blood culture analyzer. Microbiological analysis showed that none of the pre- and post-operative samples exhibited detectable bacteremia. Future research should be focused on determining the collective bacteremic effect of a sequence of orthodontic procedures including miniscrew placement or removal, typically performed during a single treatment session.

Evaluation of the use of a clinical practice guideline for external apical root resorption among orthodontists.

BACKGROUND: External apical root resorption (EARR) is a frequently observed adverse event in patients undergoing fixed appliance therapy. Assessing the patients' risk during treatment is important, as certain factors are assumed to be associated with an increased likelihood of occurrence. However, their predictive value remains limited, making evidence-based clinical decision-making challenging for orthodontists. To address this issue, the Dutch Association of Orthodontists (NvVO) developed a clinical practice guideline (CPG) for EARR in accordance with the AGREE II instrument (Appraisal of Guidelines for Research and Evaluation II) in 2018. The aim of this study is to get insight into the actual utilization and the practical implementation of the guideline among orthodontists. The hypothesis to be tested was that after its introduction, clinical practice for EARR has changed towards the recommendations in the CPG. OBJECTIVE: To investigate the use of the 2018 clinical practice guidelines for EARR among orthodontists 3 years after its introduction. METHODS: A questionnaire using a 7-point Likert scale was developed concerning four domains of EARR described in the guideline. The questionnaire was piloted, finalised, and then distributed digitally among Dutch orthodontists. REDCap was used for data collection, starting with an invitation email in June 2021, followed by two reminders. Effect was tested by the Mann-Whitney U test, and the influence of demographic variables was analysed. RESULTS: Questionnaires were sent out to all 275 and completed by 133 (response rate 48%); N = 59 females and N = 73 males were included; 81% had their training in the Netherlands, 89% had ≥ 6 years of work experience, and 89% worked in private orthodontic practice. One hundred thirty orthodontists (98.5%) reported changes in clinical practice. The biggest positive change in clinical behaviour regarding EARR occurred if EARR was diagnosed during treatment. Sex, clinical experience, country of specialist training, and working environment of the respondents did not affect clinical practices regarding EARR. CONCLUSIONS: This questionnaire demonstrated that, 3 years after introduction of the guideline, orthodontists improved their self-reported clinical practices to a more standardised management of root resorption. None of the demographic predictors had a significant effect on the results.

The influence of the segmentation process on 3D measurements from cone beam computed tomography-derived surface models.

To compare the accuracy of linear and angular measurements between cephalometric and anatomic landmarks on surface models derived from 3D cone beam computed tomography (CBCT) with two different segmentation protocols was the aim of this study. CBCT scans were made of cadaver heads and 3D surface models were created of the mandible using two different segmentation protocols. A high-resolution laser surface scanner was used to make a 3D model of the macerated mandibles. Twenty linear measurements at 15 anatomic and cephalometric landmarks between the laser surface scan and the 3D models generated from the two segmentation protocols (commercial segmentation (CS) and doctor's segmentation (DS) groups) were measured. The interobserver agreement for all the measurements of the all three techniques was excellent (intraclass correlation coefficient 0.97-1.00). The results are for both groups very accurate, but only for the measurements on the condyle and lingual part of the mandible, the measurements in the CS group is slightly more accurate than the DS group. 3D surface models produced by CBCT are very accurate but slightly inferior to reality when threshold-based methods are used. Differences in the segmentation process resulted in significant clinical differences between the measurements. Care has to be taken when drawing conclusions from measurements and comparisons made from different segmentations, especially at the condylar region and the lingual side of the mandible.

Biofilm formation on stainless steel and gold wires for bonded retainers in vitro and in vivo and their susceptibility to oral antimicrobials.

OBJECTIVE: Bonded retainers are used in orthodontics to maintain treatment result. Retention wires are prone to biofilm formation and cause gingival recession, bleeding on probing and increased pocket depths near bonded retainers. In this study, we compare in vitro and in vivo biofilm formation on different wires used for bonded retainers and the susceptibility of in vitro biofilms to oral antimicrobials. MATERIALS AND METHODS: Orthodontic wires were exposed to saliva, and in vitro biofilm formation was evaluated using plate counting and live/dead staining, together with effects of exposure to toothpaste slurry alone or followed by antimicrobial mouthrinse application. Wires were also placed intra-orally for 72 h in human volunteers and undisturbed biofilm formation was compared by plate counting and live/dead staining, as well as by denaturing gradient gel electrophoresis for compositional differences in biofilms. RESULTS: Single-strand wires attracted only slightly less biofilm in vitro than multi-strand wires. Biofilms on stainless steel single-strand wires however, were much more susceptible to antimicrobials from toothpaste slurries and mouthrinses than on single-strand gold wires and biofilms on multi-strand wires. Also, in vivo significantly less biofilm was found on single-strand than on multi-strand wires. Microbial composition of biofilms was more dependent on the volunteer involved than on wire type. CONCLUSIONS: Biofilms on single-strand stainless steel wires attract less biofilm in vitro and are more susceptible to antimicrobials than on multi-strand wires. Also in vivo, single-strand wires attract less biofilm than multi-strand ones. CLINICAL SIGNIFICANCE: Use of single-strand wires is preferred over multi-strand wires, not because they attract less biofilm, but because biofilms on single-strand wires are not protected against antimicrobials as in crevices and niches as on multi-strand wires.