Controlled release of MT-1207 using a novel gastroretentive bilayer system comprised of hydrophilic and hydrophobic polymers.

In the present study, novel gastroretentive bilayer tablets were developed that are promising for the once-a-day oral delivery of the drug candidate MT-1207. The gastroretentive layer consisted of a combination of hydrophilic and hydrophobic polymers, namely polyethylene oxide and Kollidon® SR. A factorial experiment was conducted, and the results revealed a non-effervescent gastroretentive layer that, unlike most gastroretentive layers reported in the literature, was easy to prepare, and provided immediate tablet buoyancy (mean floating lag time of 1.5 s) that lasted over 24 h in fasted state simulated gastric fluid (FaSSGF) pH 1.6, irrespective of the drug layer, thereby allowing a 24-hour sustained release of MT-1207 from the drug layer of the tablets. Furthermore, during in vitro buoyancy testing of the optimised bilayer tablets in media of different pH values (1.0, 3.0, 6.0), the significant difference (one-way ANOVA, p < 0.001) between the respective total floating times indicated that stomach pH effects on tablet buoyancy are important to be considered during the development of non-effervescent gastroretentive formulations and the choice of dosing regimen. To the best of our knowledge, this has not been reported before, and it should probably be factored in when designing dosing regimens. Finally, a pharmacokinetic study in Beagle dogs indicated a successful in vivo 24-hour sustained release of MT-1207 from the optimised gastroretentive bilayer tablet formulations with the drug plasma concentration remaining above the estimated minimum effective concentration of 1 ng/mL at the 24-hour timepoint and also demonstrated the gastroretentive capabilities of the hydrophilic and hydrophobic polymer combination. The optimised formulations will be forwarded to clinical development.

In vitro and in vivo evaluation of a sustained-release once-a-day formulation of the novel antihypertensive drug MT-1207.

Hypertension is one of the most common chronic cardiovascular disorders. Sustained-release formulations are developed to maintain drug therapeutic levels throughout the treatment of hypertension, to promote patient compliance and improve patient outcomes. We have developed and tested in in vivo trials a once-a-day tablet formulation for the novel antihypertensive drug MT-1207. The tablets based upon a hydrophilic polymer matrix underwent post-compression parameter and physicochemical characterisations, along with in vitro drug release testing. The most promising formulation containing 31% w/w HPMC K15M gave a 24-hour release of MT-1207 with an almost constant release rate up to 20 hours. Follow in in vivo studies were carried out in Beagle dogs for the optimised sustained-release tablets in comparison to immediate-release tablets. The results showed that a sustained release of MT-1207 from the new formulation was achieved with a drug t1/2 2-2.5 times longer than the immediate-release tablets. Moreover, the AUC0-24h values of both sustained- and immediate-release tablets were identical at the same dose of 30 mg, indicating that the same amount of drug was absorbed in each case. For treatments based upon MT-1207, this development is significant for future commercial exploitation via scale-up and further trials, and for improved patient outcomes.

Multiple Linear Regression Modeling To Predict the Stability of Polymer-Drug Solid Dispersions: Comparison of the Effects of Polymers and Manufacturing Methods on Solid Dispersion Stability.

Solid dispersions can be a successful way to enhance the bioavailability of poorly soluble drugs. Here 60 solid dispersion formulations were produced using ten chemically diverse, neutral, poorly soluble drugs, three commonly used polymers, and two manufacturing techniques, spray-drying and melt extrusion. Each formulation underwent a six-month stability study at accelerated conditions, 40 °C and 75% relative humidity (RH). Significant differences in times to crystallization (onset of crystallization) were observed between both the different polymers and the two processing methods. Stability from zero days to over one year was observed. The extensive experimental data set obtained from this stability study was used to build multiple linear regression models to correlate physicochemical properties of the active pharmaceutical ingredients (API) with the stability data. The purpose of these models is to indicate which combination of processing method and polymer carrier is most likely to give a stable solid dispersion. Six quantitative mathematical multiple linear regression-based models were produced based on selection of the most influential independent physical and chemical parameters from a set of 33 possible factors, one model for each combination of polymer and processing method, with good predictability of stability. Three general rules are proposed from these models for the formulation development of suitably stable solid dispersions. Namely, increased stability is correlated with increased glass transition temperature ( Tg) of solid dispersions, as well as decreased number of H-bond donors and increased molecular flexibility (such as rotatable bonds and ring count) of the drug molecule.

Controlling the Release of Indomethacin from Glass Solutions Layered with a Rate Controlling Membrane Using Fluid-Bed Processing. Part 1: Surface and Cross-Sectional Chemical Analysis.

Fluid bed coating has been shown to be a suitable manufacturing technique to formulate poorly soluble drugs in glass solutions. Layering inert carriers with a drug-polymer mixture enables these beads to be immediately filled into capsules, thus avoiding additional, potentially destabilizing, downstream processing. In this study, fluid bed coating is proposed for the production of controlled release dosage forms of glass solutions by applying a second, rate controlling membrane on top of the glass solution. Adding a second coating layer adds to the physical and chemical complexity of the drug delivery system, so a thorough understanding of the physical structure and phase behavior of the different coating layers is needed. This study aimed to investigate the surface and cross-sectional characteristics (employing scanning electron microscopy (SEM) and time of flight secondary ion mass spectrometry (ToF-SIMS)) of an indomethacin-polyvinylpyrrolidone (PVP) glass solution, top-coated with a release rate controlling membrane consisting of either ethyl cellulose or Eudragit RL. The implications of the addition of a pore former (PVP) and the coating medium (ethanol or water) were also considered. In addition, polymer miscibility and the phase analysis of the underlying glass solution were investigated. Significant differences in surface and cross-sectional topography of the different rate controlling membranes or the way they are applied (solution vs dispersion) were observed. These observations can be linked to the polymer miscibility differences. The presence of PVP was observed in all rate controlling membranes, even if it is not part of the coating solution. This could be attributed to residual powder presence in the coating chamber. The distribution of PVP among the sample surfaces depends on the concentration and the rate controlling polymer used. Differences can again be linked to polymer miscibility. Finally, it was shown that the underlying glass solution layer remains amorphous after coating of the rate controlling membrane, whether formed from an ethanol solution or an aqueous dispersion.

Mucoadhesive Chitosan-Pectinate Nanoparticles for the Delivery of Curcumin to the Colon.

In the present study, we report the properties of a mucoadhesive chitosan-pectinate nanoparticulate formulation able to retain its integrity in the milieu of the upper gastrointestinal tract and subsequently, mucoadhere and release curcumin in colon conditions. Using this system, we aimed to deliver curcumin to the colon for the possible management of colorectal cancer. The delivery system comprised of a chitosan-pectinate composite nanopolymeric with a z-average of 206.0 nm (±6.6 nm) and zeta potential of +32.8 mV (±0.5 mV) and encapsulation efficiency of 64%. The nanoparticles mucoadhesiveness was higher at alkaline pH compared to acidic pH. Furthermore, more than 80% release of curcumin was achieved in pectinase-enriched medium (pH 6.4) as opposed to negligible release in acidic and enzyme-restricted media at pH 6.8. SEM images of the nanoparticles after exposure to the various media indicate a retained matrix in acid media as opposed to a distorted/fragmented matrix in pectinase-enriched medium. The data strongly indicates that the system has the potential to be applied as a colon-targeted mucoadhesive curcumin delivery system for the possible treatment of colon cancer.

Combination of (M)DSC and surface analysis to study the phase behaviour and drug distribution of ternary solid dispersions.

PURPOSE: Miscibility of the different compounds that make up a solid dispersion based formulation play a crucial role in the drug release profile and physical stability of the solid dispersion as it defines the phase behaviour of the dispersion. The standard technique to obtain information on phase behaviour of a sample is (modulated) differential scanning calorimetry ((M)DSC). However, for ternary mixtures (M)DSC alone is not sufficient to characterize their phase behaviour and to gain insight into the distribution of the active pharmaceutical ingredient (API) in a two-phased polymeric matrix. METHODS: MDSC was combined with complementary surface analysis techniques, specifically time-of-flight secondary ion mass spectrometry (ToF-SIMS) and atomic force microscopy (AFM). Three spray-dried model formulations with varying API/PLGA/PVP ratios were analyzed. RESULTS: MDSC, TOF-SIMS and AFM provided insights into differences in drug distribution via the observed surface coverage for 3 differently composed ternary solid dispersions. CONCLUSIONS: Combining MDSC and surface analysis rendered additional insights in the composition of mixed phases in complex systems, like ternary solid dispersions.

Surface characteristics of spray-dried microspheres consisting of PLGA and PVP: relating the influence of heat and humidity to the thermal characteristics of these polymers.

In view of the increasing interest in injectable controlled release formulations for the treatment of chronic diseases, injectable polymeric microspheres consisting of a surface layer of poly(lactic-co-glycolic acid) (PLGA) and an underlying polyvinylpyrrolidone (PVP) layer were previously developed. The present study focuses on the influence of heat and humidity on the surface characteristics of these spray-dried PLGA/PVP microspheres. The response of the polymeric matrix to these factors will provide an insight into the expected release behavior and stability of the formulation. This should result in the development of a drug matrix with desired and tunable characteristics in terms of physicochemical stability and drug release profile, relevant in a later stage of research. Glass transition temperatures (Tgs) and miscibility behavior were analyzed by modulated differential scanning calorimetry (MDSC). Scanning electron microscopy (SEM) provided insight in particle morphology. Atomic force microscopy (AFM) was used to study the nanoscale topography and phase behavior of the samples. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) were utilized for surface chemical analysis and quantification respectively. It could be concluded that the surface characteristics (chemical composition, phase behavior, and topography) of spray-dried PVP/PLGA microparticles were affected by exposure to heat and humidity. When exposed to these conditions, a surface rearrangement occurs whereby an increase of PVP at the surface is observed, coupled with a decrease in PLGA. This phenomenon can be explained based upon the relative thermal characteristics and consequent molecular mobility of the two polymers.

Understanding the interfacial properties of nanostructured liquid crystalline materials for surface-specific delivery applications.

Nonlamellar liquid crystalline dispersions such as cubosomes and hexosomes have great potential as novel surface-targeted active delivery systems. In this study, the influence of internal nanostructure, chemical composition, and the presence of Pluronic F127 as a stabilizer, on the surface and interfacial properties of different liquid crystalline particles and surfaces, was investigated. The interfacial properties of the bulk liquid crystalline systems with coexisting excess water were dependent on the internal liquid crystalline nanostructure. In particular, the surfaces of the inverse cubic systems were more hydrophilic than that of the inverse hexagonal phase. The interaction between F127 and the bulk liquid crystalline systems depended on the internal liquid crystalline structure and chemical composition. For example, F127 adsorbed to the surface of the bulk phytantriol cubic phase, while for monoolein cubic phase, F127 was integrated into the liquid crystalline structure. Last, the interfacial adsorption behavior of the dispersed liquid crystalline particles also depended on both the internal nanostructure and the chemical composition, despite the dispersions all being stabilized using F127. The findings highlight the need to understand the specific surface characteristics and the nature of the interaction with colloidal stabilizer for understanding and optimizing the behavior of nonlamellar liquid crystalline systems in surface delivery applications.

ToF-SIMS analysis of chemical heterogenities in inkjet micro-array printed drug/polymer formulations.

Three different formulations comprising two drugs, felodipine and hydrochlorothiazide (HCT) and two polymers, poly(vinyl pyrolidone) (PVP) and poly(lactic-co-glycolic acid) (PLGA) were inkjet printed as micro-dot arrays and analysed on an individual micro-spot basis by time-of-flight secondary ion mass spectrometry (ToF-SIMS). For the HCT/PLGA formulation, the spots showed heterogeneity of the drug and other chemical constituents. To further investigate these heterogeneities, multivariate curve resolution was applied to the ToF-SIMS hyperspectral image datasets. This approach successfully identified distinct chemical components elucidating the HCT, PLGA, substrate material, and contaminants based on sulphur, phosphorous and sodium chloride. Spots printed using either of the drugs with PVP exhibited full substrate coverage and a uniform distribution of the active ingredient along with all other constituents within the printed spot area. This represents the preferred situation in terms of stability and controlling the release of a drug from a polymer matrix.

Development and optimisation of simulated salivary fluid for biorelevant oral cavity dissolution.

Drug release within the oral cavity can be of paramount importance for formulations that are designed for specific purposes such as taste-masking, faster onset of therapeutic action, localization of treatment or avoidance of first-pass metabolism. Preclinical methods for assessment of dissolution in the oral cavity are necessary for design and development of these formulation but currently there is no consensus on what variables should be defined to achieve biorelevance in these tests. In this study, biorelevant simulated salivary fluids (SSFs) that can be uniformly applied for oral cavity dissolution testing were developed. Unstimulated saliva (US) SSF and stimulated saliva (SS) SSF were separately developed since the two states significantly differ. Physicochemical properties including pH, buffer capacity, surface tension and viscosity were assessed during development and optimised to mimic human saliva (HS). In order to account for the salivary proteins in HS, use of bovine submaxillary mucin (BSM) and porcine gastric mucin (PGM) in SSFs was evaluated. Following optimisation of the SSFs, biorelevance of the developed SSFs to HS was assessed by their comparative physicochemical properties as well as dissolution profiles of three diverse model compounds (sildenafil citrate, efavirenz, and caffeine) which showed comparable profiles between the SSFs and HS. This work addresses the lack of uniformed biorelevant dissolution media for oral cavity dissolution studies and provides a basis for standardised dissolution tests that provide consistency and harmonisation in future oral cavity dissolution studies. We envisage that this will have a positive impact on the development of new medicines that require functionality in the oral cavity.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue engineering, optics, and electronics. The aim of this study was to use phase separation to tailor the spatial location of drugs and thereby generate release profiles of drug payload over periods ranging from 1 week to months by exploiting different mechanisms: polymer degradation, polymer diluent dissolution, and control of microstructure. To achieve this, we used drop-on-demand inkjet three-dimensional (3D) printing. We predicted the microstructure resulting from phase separation using high-throughput screening combined with a model based on the Flory-Huggins interaction parameter and were able to show that drug release from 3D-printed objects can be predicted from observations based on single drops of mixtures. We demonstrated for the first time that inkjet 3D printing yields controllable phase separation using picoliter droplets of blended photoreactive oligomers/monomers. This new understanding gives us hierarchical compositional control, from droplet to device, allowing release to be "dialled up" without manipulation of device geometry. We exemplify this approach by fabricating a biodegradable, long-term, multiactive drug delivery subdermal implant ("polyimplant") for combination therapy and personalized treatment of coronary heart disease. This is an important advance for implants that need to be delivered by cannula, where the shape is highly constrained and thus the usual geometrical freedoms associated with 3D printing cannot be easily exploited, which brings a hitherto unseen level of understanding to emergent material properties of 3D printing.

Making tablets for delivery of poorly soluble drugs using photoinitiated 3D inkjet printing.

In this study, we investigate the viability of three-dimensional (3D) inkjet printing with UV curing to produce solid dosage forms containing a known poorly soluble drug, carvedilol. The formulation consists of 10 wt% carvedilol, Irgacure 2959, and a photocurable N-vinyl-2-pyrrolidone (NVP) and poly(ethylene glycol) diacrylate matrix, with the intention of forming an amorphous solid solution for release of carvedilol. Characterization of the printed tablets showed that the drug is an amorphous state and indicated hydrogen bonding interactions between the drug and cross-linked matrix. Several simple geometries (ring, mesh, cylinder, thin film) were printed, and the surface area to volume ratio of the prints was estimated. Over 80% carvedilol release was observed for all printed tablet geometries within ten hours. The release behaviour of carvedilol was fastest for the thin films, followed by the ring and mesh geometries, and slowest in the cylindrical forms. More rapid release was correlated to an increased surface area to volume ratio. This is the first study to implement 3D UV inkjet to make solid dispersion tablets suitable for poorly soluble drugs. Results also demonstrate that high drug-loaded tablets with a variety of release profiles can successfully be accessed with the same UV-curable inkjet formulation by varying the tablet geometry.

Is rat a good model for assessment of particulate-based taste-masked formulations?

Recently there has been an increased interest to develop specialised dosage forms that are better suited to specific patient populations, such as paediatrics and geriatrics. In these patient populations the acceptability of the oral dosage form can be paramount to the products success. However, many Active Pharmaceutical Ingredients (APIs) are known to cause an aversive taste response. One way to increase the acceptability and to enhance the palatability of the formulation is to design coated taste-masked particulate-based dosage forms. The masking of poorly tasting drugs with physical barriers such as polymer coatings can be utilised to prevent the release of drug within the oral cavity, thus preventing a taste response. However, currently, there are few assessment tools and models available to test the efficiency of these particulate-based taste-masked formulations. The rat brief access taste aversion model has been shown to be useful in assessment of taste for liquid dosage forms. However, the applicability of the rat model for particulate-based taste masked formulations is yet to be assessed. It is not understood whether dissolution, solubility and thus exposure of the drug to taste receptors would be the same in rat and human. Therefore, rat saliva must be compared to human saliva to determine the likelihood that drug release would be similar within the oral cavity for both species. In this study rat saliva was characterised for parameters known to be important for drug dissolution, such as pH, buffer capacity, surface tension, and viscosity. Subsequently dissolution of model bitter tasting compounds, sildenafil citrate and efavirenz, in rat saliva was compared to dissolution in human saliva. For all parameters characterised and for the dissolution of both drugs in rat saliva, a substantial difference was observed when compared to human saliva. This discrepancy in saliva parameters and dissolution of model drugs suggests that preclinical taste evaluation of particulate-based taste-masked formulations suggests rat is not a good model for predicting taste of solid dosage forms or undissolved drug where dissolution is required. Alternative preclinical in vivo models in other species, or improved biorelevant in vitro models should be considered instead.

Dynamic equilibria in solvent-mediated anion, cation and ligand exchange in transition-metal coordination polymers: solid-state transfer or recrystallisation?

The solution properties of a series of transition-metal-ligand coordination polymers [ML(X)(n)](infinity) [M=Ag(I), Zn(II), Hg(II) and Cd(II); L=4,4'-bipyridine (4,4'-bipy), pyrazine (pyz), 3,4'-bipyridine (3,4'-bipy), 4-(10-(pyridin-4-yl)anthracen-9-yl)pyridine (anbp); X=NO(3) (-), CH(3)COO(-), CF(3)SO(3) (-), Cl(-), BF(4) (-); n=1 or 2] in the presence of competing anions, metal cations and ligands have been investigated systematically. Providing that the solubility of the starting complex is sufficiently high, all the components of the coordination polymer, namely the anion, the cation and the ligand, can be exchanged on contact with a solution phase of a competing component. The solubility of coordination polymers is a key factor in the analysis of their reactivity and this solubility depends strongly on the physical properties of the solvent and on its ability to bind metal cations constituting the backbone of the coordination polymer. The degree of reversibility of these solvent-induced anion-exchange transformations is determined by the ratio of the solubility product constants for the starting and resultant complexes, which in turn depend upon the choice of solvent and the temperature. The extent of anion exchange is controlled effectively by the ratio of the concentrations of incoming ions to outgoing ions in the liquid phase and the solvation of various constituent components comprising the coordination polymer. These observations can be rationalised in terms of a dynamic equilibrium of ion exchange reactions coupled with Ostwald ripening of crystalline products. The single-crystal X-ray structures of [Ag(pyz)ClO(4)](infinity) (1), {[Ag(4,4'-bipy)(CF(3)SO(3))]CH(3)CN}(infinity) (2), {[Ag(4,4'-bipy)(CH(3)CN)]ClO(4) 0.5 CH(3)CN}(infinity) (3), metal-free anbp (4), [Ag(anbp)NO(3)(H(2)O)](infinity) (5), {[Cd(4,4'-bipy)(2)(H(2)O)(2)](NO(3))(2)4 H(2)O}(infinity) (6) and {[Zn(4,4'-bipy)SO(4)(H(2)O)(3)] 2 H(2)O}(infinity) (7) are reported.

Substrate stiffness affects early differentiation events in embryonic stem cells.

Embryonic stem cells (ESC) are both a potential source of cells for tissue replacement therapies and an accessible tool to model early embryonic development. Chemical factors such as soluble growth factors and insoluble components of the extracellular matrix are known to affect the differentiation of murine ESCs. However, there is also evidence to suggest that undifferentiated cells can both sense the mechanical properties of their environment and differentiate accordingly. By growing ESCs on flexible polydimethylsiloxane substrates with varying stiffness, we tested the hypothesis that substrate stiffness can influence ESC differentiation. While cell attachment was unaffected by the stiffness of the growth substrate, cell spreading and cell growth were all increased as a function of substrate stiffness. Similarly, several genes expressed in the primitive streak during gastrulation and implicated in early mesendoderm differentiation, such as Brachyury, Mixl1 and Eomes, were upregulated in cell cultures on stiffer compared to softer substrates. Finally, we demonstrated that osteogenic differentiation of ESCs was enhanced on stiff substrates compared to soft substrates, illustrating that the mechanical environment can play a role in both early and terminal ESC differentiation. Our results suggest a fundamental role for mechanosensing in mammalian development and illustrate that the mechanical environment should be taken into consideration when engineering implantable scaffolds or when producing therapeutically relevant cell populations in vitro.

An investigation into the rheology of pharmaceutical inter-granular material bridges at high shear rates.

PURPOSE: This study was undertaken to investigate the rheological properties of inter-granular material bridges on the nano-scale when strained at high shear rates. MATERIALS AND METHODS: Atomic force microscopy (AFM) was used as a rheometer to measure the viscoelasticity of inter-granular material bridges for lactose:PVP K29/32 and lactose:PVP K90 granules, produced by wet granulation. RESULTS: The loss tangent (tan delta) and both the storage (G') and loss shear moduli (G'') of inter-granular material bridges were measured as a function of the probe-sample separation distance, oscillation frequency and relative humidity (RH). As the probe was withdrawn from the granule surface tan delta initially increased rapidly from zero to a plateau phase. G'' became increasingly dominant as the bridge was further extended and eventually exceeded G'. At high RH, capillary forces were foremost at bridge rupture, whereas at low RH elastic forces dominated. The effect of increasing frequency was to increase the effective elasticity of the bridge at high RH. CONCLUSIONS: AFM has been employed as a rheometer to investigate the nano-scale rheology of inter-granular material bridges. This novel method may be used to obtain a fundamental understanding how different binders, granulated with different diluent fillers, behave at high shear rates.

Particulate drug interactions with polymeric and elastomeric valve components in suspension formulations for metered dose inhalers.

PURPOSE: To characterise the adhesive interactions between three pulmonary active pharmaceutical ingredient (API) materials and the components of pressurised metered dose inhalers (pMDIs) obtained from two commercially available products (termed 'Prod-1' and 'Prod-2'). This is of potential interest, as a greater understanding of the interactions between specific APIs and surfaces may aid manufacturers in component selection during pMDI system development. METHODS: The theoretical work of adhesion (DeltaG(132)) for each API-pMDI component interaction was calculated using the surface component analysis (SCA) approach. These results were correlated with corresponding API-pMDI component separation energy measurements determined using colloid probe AFM. RESULTS: Strong correlations existed between separation energy and the DeltaG(132) parameters where the polar contribution was accounted for. This highlighted the adhesive influence of polar surface energy on each interaction in this study. Generally the largest adhesive interactions involved APIs and pMDI components which have a bipolar surface energy (i.e. both gamma(-) and gamma(+) >1 mJ m(-2)). CONCLUSIONS: For each API-pMDI interaction in this study, the polar component of surface energy has the greater influence on adhesive events. The bipolar surface energetics of certain APIs and pMDI components were deemed responsible for the increased adhesive interactions observed with these materials. This study highlights that different materials can have different effects on the adhesive interactions with particulate APIs; information that could aid the manufacturer in producing more effective and efficient pMDI systems.

Application of biorelevant saliva-based dissolution for optimisation of orally disintegrating formulations of felodipine.

The oral cavity is of great importance to the performance of orally retained formulations, including: orally disintegrating tablets, taste-masked formulations, and buccal/sublingual delivery systems. With regards to in vitro dissolution assessment of these dosage forms, human saliva should be represented by the dissolution media. Currently there is no general consensus regarding oral cavity dissolution. In this study pooled human saliva was characterised and utilised as dissolution media for biorelevant oral cavity dissolution studies and to assess drug release. Lipophilic drug felodipine with challenging biopharmaceutical properties was selected for assessment in oral cavity dissolution studies. These saliva dissolution studies investigated for the first time how biorelevant dissolution can be implemented as a screening tool to guide the formulation development process and to predict dosage form performance within the mouth. In this study a combination of three dissolution enhancement strategies (cryomilling, solid dispersion, and inclusion complexation) were employed to eventually increase the concentration of felodipine in saliva 150-fold. Using this successful formulation strategy orally disintegrating tablets of felodipine were produced. Interestingly, the percentage release of felodipine in compendial dissolution apparatus was shown to be over 80% after 10 min. On the other hand, saliva-based dissolution showed that percentage release of felodipine was only 0.2% after 10 min using the same formulation. This discrepancy in drug release between dissolution media highlights the need for biorelevant dissolution apparatus for the oral cavity to reliably assess performance of relevant dosage forms in vitro.

Water-based 3D inkjet printing of an oral pharmaceutical dosage form.

Inkjet printing is a form of additive manufacturing where liquid droplets are selectively deposited onto a substrate followed by solidification. The process provides significant potential advantages for producing solid oral dosage forms or tablets, including a reduction in the number of manufacturing steps as well as the ability to tailor a unique dosage regime to an individual patient. This study utilises solvent inkjet printing to print tablets through the use of a Fujifilm Dimatix printer. Using polyvinylpyrrolidone and thiamine hydrochloride (a model excipient and drug, respectively), a water-based ink formulation was developed to exhibit reliable and effective jetting properties. Tablets were printed on polyethylene terephthalate films where solvent evaporation in the ambient environment was the solidification mechanism. The tablets were shown to contain a drug loading commensurate with the composition of the ink, in its preferred polymorphic phase of a non-stoichiometric hydrate distributed homogenously. The printed tablets displayed rapid drug release. This paper illustrates solvent inkjet printing's ability to print entire free-standing tablets without an edible substrate being part of the tablet and the use of additional printing methods. Common problems with solvent-based inkjet printing, such as the use toxic solvents, are avoided. The strategy developed here for tablet manufacturing from a suitable ink is general and provides a framework for the formulation for any drug that is soluble in water.

Lipids and polymers in pharmaceutical technology: Lifelong companions.

In pharmaceutical technology, lipids and polymers are considered pillar excipients for the fabrication of most dosage forms, irrespective of the administration route. They play various roles ranging from support vehicles to release rate modifiers, stabilizers, solubilizers, permeation enhancers and transfection agents. Focusing on selected applications, which were discussed at the Annual Scientific Meeting of the Gattefossé Foundation 2018, this manuscript recapitulates the fundamental roles of these two important classes of excipients, either employed alone or in combination, and provides insight on their functional properties in various types of drug formulations. Emphasis is placed on oral formulations for the administration of active pharmaceutical ingredients with low aqueous solubilities or poor permeation properties. Additionally, this review article covers the use of lipids and polymers in the design of colloidal injectable delivery systems, and as substrates in additive manufacturing technologies for the production of tailor-made dosage forms.