The Effects of a Cool Saline Solution Irrigation on Mandibular Third Molar Extraction Site: A Postoperative Split-Mouth Evaluation.

OBJECTIVE: This study aimed to evaluate the effects of sterile saline solution irrigation (lavage) performed after mandibular third molar extraction on postoperative complications, utilizing a split-mouth randomized clinical trial design. METHODS: Seventeen healthy participants requiring bilateral mandibular third molar extraction were enrolled in this single-center study. In each participant, one impacted third molar was designated as the experimental group and subjected to saline lavage at 4 °C. In contrast, the control group was the other impacted third molar, undergoing saline lavage at 25 °C. Various parameters, including postoperative pain, mouth opening, and facial swelling, were assessed using standardized measures and three-dimensional facial scanning at multiple time points. RESULTS: The average age of participants was 26.66 ± 4.1 years, with no postoperative complications observed in either group. The duration of surgery did not significantly differ between groups. Postoperative pain was significantly reduced in the experimental group during the immediate postoperative period compared with the control group, but this difference diminished over time. No significant differences were observed in mouth opening or facial swelling between groups at any time. CONCLUSION: In site 4 °C, sterile saline solution irrigation after mandibular third molar extraction may effectively reduce early postoperative complications, particularly pain, without prolonging surgical duration.

Different Uses of Conscious Sedation for Managing Dental Anxiety During Third-Molar Extraction: Clinical Evidence and State of the Art.

Dental anxiety, linked to avoiding dental treatment and heightened medical and surgical risks, prompted this systematic review. The objective is to synthesize existing evidence on conscious sedation techniques employed for managing dental anxiety in patients scheduled for third molar extraction surgery, aiming to identify optimal approaches and address knowledge gaps. This systematic review followed the "Preferred Reporting Items for Systematic Reviews and Meta-Analyses" checklist and the population, investigation, comparation, outcome framework. The protocol still needs to be registered. A thorough search was conducted, incorporating MEDLINE/PubMed, EMBASE, SCOPUS, clinicaltrials.gov, and the Cochrane Database of Systematic Reviews until February 2024. Only randomized controlled trials were considered, following "Preferred Reporting Items for Systematic Reviews and Meta-Analyses" guidelines. The risk of bias was evaluated following the Cochrane Handbook for Systematic Reviews of Interventions. Eighteen randomized controlled trials involving 2081 patients were included. Certain factors limited the feasibility of a meaningful meta-analysis, leading to a narrative synthesis. Conscious sedation with virtual reality showed an association with improved dental anxiety in 4 studies. One study reported reduced cortisol levels with midazolam compared with a placebo, whereas another noted significant variations in perioperative renin levels with remifentanil versus placebo. This review reveals inconclusive and conflicting findings regarding the role of conscious sedation in managing dental anxiety during third molar extraction surgery. Persistent uncertainties arise due to a need for consistent, standardized outcome measures. Addressing these limitations in study design is crucial for future research.

Prediction of Interactomic HUB Genes in Periodontitis With Acute Myocardial Infarction.

BACKGROUND: Acute myocardial infarction (AMI) risk correlates with C-reactive protein (CRP) levels, suggesting systemic inflammation is present well before AMI. Studying different types of periodontal disease (PD), extremely common in individuals at risk for AMI, has been one important research topic. According to recent research, AMI and PD interact via the systemic production of certain proinflammatory and anti-inflammatory cytokines, small signal molecules, and enzymes that control the onset and development of both disorders' chronic inflammatory reactions. This study uses machine learning to identify the interactome hub biomarker genes in acute myocardial infarction and periodontitis. METHODS: GSE208194 and GSE222883 were chosen for our research after a thorough search using keywords related to the study's goal from the gene expression omnibus (GEO) datasets. DEGs were identified from the GEOR tool, and the hub gene was identified using Cytoscape-cytohubba. Using expression values, Random Forest, Adaptive Boosting, and Naive Bayes, widgets-generated transcriptomics data, were labelled, and divided into 80/20 training and testing data with cross-validation. ROC curve, confusion matrix, and AUC were determined. In addition, Functional Enrichment Analysis of Differentially Expressed Gene analysis was performed. RESULTS: Random Forest, AdaBoost, and Naive Bayes models with 99%, 100%, and 75% AUC, respectively. Compared to RF, AdaBoost, and NB classification models, AdaBoost had the highest AUC. Categorization algorithms may be better predictors than important biomarkers. CONCLUSIONS: Machine learning model predicts hub and non-hub genes from genomic datasets with periodontitis and acute myocardial infarction.

Prevalence of temporomandibular disorders in clear aligner patients using orthodontic intermaxillary elastics assessed with diagnostic criteria for temporomandibular disorders (DC/TMD) axis II evaluation: A cross-sectional study.

BACKGROUND: The objective of this investigation is to assess the relationship between the utilisation of orthodontic intermaxillary elastics and temporomandibular disorder (TMD) symptoms in clear aligner patients and to examine the correlation between the elastic usage time with the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD)-Axis II Evaluation Forms. METHODS: This study was carried out on a total of 40 clear aligner patients using intermaxillary elastics in the experimental group and 30 clear aligner patients who did not use any intermaxillary elastics in the control group. The data were evaluated using the Mann-Whitney U, chi-square, Fisher's exact chi-square, and Fisher Freeman Halton exact chi-square tests. RESULTS: The characteristic pain intensity, mastication, mobility, communication, global and PHQ-9 scores of the experimental group were significantly higher than those of the control group (p < .05). The characteristic pain intensity score, interference score and chronic pain grade score of patients using Class III elastics were statistically significantly higher than those of patients using Class II elastics (p < .05). Patients who used elastics for less than 6 months had statistically significantly higher PHQ-9 scores than those who used elastics for more than 6 months (p < .05). CONCLUSIONS: Orthodontic treatment may affect occlusion, bite force and jaw movement, which may cause or worsen TMD symptoms, and the DC/TMD questionnaires can determine if orthodontic patients acquire TMD by assessing their psychosocial state and pain-related problems.

Lessons to be learned when designing comprehensible patient-oriented online information about temporomandibular disorders.

BACKGROUND: Temporomandibular disorders (TMD) are a prevalent ailment with a global impact, affecting a substantial number of individuals. While some individuals are receiving treatment from orthodontists for TMD, a significant proportion of individuals obtain knowledge through websites. OBJECTIVES: Our purpose had been to evaluate, from a patient-oriented perspective, the readability of home pages of websites scored in the 10 most prominent devoted to TMD. We also determined what level of education would have been needed to get an overview of the information on the websites under scrutiny. This approach ensures that our findings are centred on the patient experience, providing insights into how accessible and understandable websites about TMD. METHODS: We determined the top 10 patient-focused English language websites by searching for 'temporomandibular disorders' in the 'no country redirect' plugin of the Google Chrome browser (www.google.com/ncr). The readability of the texts was assessed using the Gunning fog index (GFI), Coleman Liau index (CLI), Automated readability index (ARI) Simple Measure of Gobbledygook (SMOG), Flesch Kincald grade level (FKGL), Flesh reasing ease (FRE) (https://readabilityformulas.com). RESULTS: The mean Flesch reading ease index score was determined to be 48.67, accompanied by a standard deviation of 15.04 and these websites require an average of 13.49 years of formal education (GFI), with a standard deviation of 2.62, for ease of understanding. CONCLUSION: Our research indicates that a significant proportion of websites related to TMD can be defined as a level of complexity that exceeds the ability to read comprehension of the general population.

Efficacy of hyaluronic acid in temporomandibular disorders evaluated with diagnostic criteria for temporomandibular disorders (DC/TMD).

BACKGROUND: The study aimed to retrospectively assess the efficacy of hyaluronic acid (HA) in managing temporomandibular disorders (TMD) using the diagnostic criteria for temporomandibular disorders (DC/TMD). There has been an ongoing debate regarding the effectiveness of HA as a treatment option for TMD, which necessitated a thorough evaluation. METHODS: The review adhered to PRISMA guidelines conducted across eight different databases, including PubMed, Embase, Web of Science, Cochrane Library, Scopus, ScienceDirect, PsycINFO and CINAHL. The selection criteria included studies that evaluated the efficacy of HA in TMD patients, utilised DC/TMD, and were published in English. Data extraction and quality assessment were performed independently by two reviewers. ROB-2 tool was employed to assess methodological quality of the assessed studies. RESULTS: A total of 10 studies met the inclusion criteria. They demonstrated that HA was effective in improving various symptoms of TMD, such as pain, mouth opening and joint sounds over control group. But on the other end, platelet-rich plasma (PRP) was found to be better than HA intervention in alleviation of TMD symptoms. However, the degree of improvement varied across the studies. Some studies reported adverse effects, but these were typically minor and transient. Risk of bias assessment was low in all the included studies. CONCLUSION: The findings suggest that HA can be an effective treatment for TMD when evaluated with DC/TMD. However, the variation in effectiveness across studies indicates the need for individualised treatment planning and careful monitoring of adverse effects. Further research is needed to refine the treatment protocols and understand the long-term effectiveness and safety of HA in TMD management.

Accuracy of temporomandibular disorders diagnosis evaluated through the diagnostic criteria for temporomandibular disorder (DC/TDM) Axis II compared to the Axis I evaluations: a systematic review and meta-analysis.

BACKGROUND: The temporomandibular joint (TMJ) is a complex joint that facilitates mandibular movements during speech, chewing, and swallowing activities. The Axis I evaluation of the DC/TMD focuses on assessing physical diagnoses related to TMDs. It includes an assessment of pain and functional limitations, such as jaw opening range, joint sounds, and joint tenderness. The Axis II evaluation of the DC/TMD provides information on the patient's psychological status and quality of life. This Systematic Review with Meta-Analysis aimed to evaluate the accuracy of Temporomandibular Disorders diagnosis considered through the Diagnostic Criteria for Temporomandibular Disorder (DC/TDM) axis II compared to the Axis I evaluations. METHODS: A search was made in PubMed, Web of Science and Lilacs for articles published from the inception until 20 January 2023. We applied the Population, Exposure, Comparator, and Outcomes (PECO) model [1] to assess document eligibility. Only studies that evaluated patients by DC/TMD Axis I and Axis II were considered. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the odds ratio (OR) between the two groups (Axis I and Axis II). RESULTS: Fifty-one articles were selected because of the search. Four papers were excluded before the screening: 2 pieces were not in English, and two were reviewed. The remaining 47 articles were selected for the title and abstract screening to evaluate whether they met the PECO criteria. Among these, four papers were established; the overall effect showed that there was no difference in TMD diagnosis between Axis I and Axis II (RR 1.17; 95% CI: 0.80- 1.71; Z:0.82; P = .41), suggesting that there is no difference between Axis I and Axis II. CONCLUSION: In conclusion, DC/TMD is an effective tool for the diagnosis of TMD. It improves the accuracy of TMD diagnosis, allows for the classification of subtypes, and assesses psychosocial factors that may impact the development or maintenance of TMD symptoms.

The effectiveness of chitosan as a hemostatic in dentistry in patients with antiplatelet/anticoagulant therapy: systematic review with meta-analysis.

Hemorrhage control is a crucial aspect of dental procedures, and achieving efficient hemostasis remains a key challenge. The advent of hemostatic dressings has revolutionized the field of dentistry by providing effective and convenient solutions for managing bleeding in vari-ous dental scenarios. This article aims to provide an overview of hemostatic dressings, their mechanisms of action, and their diverse applications in dentistry. We applied the following Pop-ulation, Exposure, Comparator, and Outcomes (PICO) model to assess the document eligibility. A literature search was performed on major search engines, using keywords. At the end of the search, 3 articles were selected that matched the PICO. Three items were selected after the screen-ing process, and bleeding times were analyzed between the control group and the study group. The overall effect showed a substantial and statistically significant difference with bleeding time in favour of HDD-treated patients, showing that this garrison is very useful in controlling bleed-ing for patients taking anticoagulants and antiplatelets (Mean difference - 5.61; C.I. -5.70, - 5.52); Overall, hemostatic dressings have revolutionized the management of bleeding in dentistry, offering a promising solution to achieve optimal hemostasis, improve treatment outcomes, and enhance patient care, particularly Hemcon.

A comparative evaluation of physical properties of CAD/CAM complete denture resins- an in vitro study.

BACKGROUND: In dentistry, there is a growing preference for computer-aided design and computer-aided manufacturing (CAD/CAM) systems over traditional laboratory procedures. However, there is not much literature comparing various CAD/CAM materials. Thus, this study aimed to assess and compare the color stability and hardness of gingival and tooth colored milled and 3D-printed acrylic resins. MATERIALS AND METHODS: Four types of CAD/CAM materials were prepared: 3D-printed pink shade (PP), milled polymenthymethacrylate (PMMA) pink shade (MP), 3D-printed tooth shade (PT) and milled PMMA tooth shade (MT) (n = 6). For hardness, disc shaped samples of 15 mm × 2 mm and for color stability, bar shaped samples of 65mmx10mmx2.5 mm were prepared and polished. Vickers hardness test was performed in a microhardness tester. Color stability test was done by immersing in coffee solution and coca cola for 7 days. Day 0 and day 7 measurements were recorded using a digital spectrophotometer and the change in color was calculated. For statistical analysis, one-way ANOVA and Tukey's post hoc tests were done. RESULTS: For color stability, milled PMMA was superior to 3D-printed resin samples. Milled pink and tooth shade samples had similar color stability, whereas 3D-printed tooth shade samples were more color stable as compared to pink shade 3D-printed samples. For hardness, milled tooth shade PMMA was the most superior one, followed by 3D-printed tooth shade, whereas pink shade milled PMMA and 3D-printed resin samples had similar hardness values and were inferior to the tooth shade CAD/CAM materials. CONCLUSION: Color stability of milled PMMA is superior to that of 3D-printed resins. Hardness of tooth shade milled and 3D-printed resins is more than that of pink shade milled and 3D-printed resins.

Prevalence of Bruxism in alcohol abusers: a systematic review conducted according to PRISMA guidelines and the cochrane handbook for systematic reviews of interventions.

BACKGROUND: Bruxism, a common oral parafunctional behavior characterized by the grinding or clenching of teeth, is a multifactorial condition with potentially detrimental effects on oral health and overall well-being. In recent years, there has been growing interest in understanding the relationship between bruxism and alcohol abuse, as both are prevalent issues that may share underlying factors and exacerbate each other. This systematic review, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement, aims to evaluate the frequency of bruxism among individuals with alcohol abuse. METHODS: A comprehensive search of electronic databases, including PubMed, Lilacs, Scopus and Web of Science, will be conducted to identify relevant studies published up to the knowledge cutoff date in January 2023. The search strategy will include keywords related to bruxism, alcohol abuse, and their synonyms. Inclusion criteria will encompass original research studies, such as observational, cross-sectional, cohort, and case-control studies, as well as clinical trials, that examine the relationship between bruxism and alcohol abuse. Two independent reviewers will perform the study selection, data extraction, and quality assessment, with discrepancies resolved by consensus. RESULTS: The systematic review will present a summary of the identified studies, including the study design, characteristics of the study populations, and key findings related to the association between bruxism and alcohol abuse. The potential mechanisms underlying this relationship will also be explored. Subgroup analyses and the quality of evidence will be assessed. Finally, the implications of this association for clinical practice and further research will be discussed. CONCLUSIONS: This systematic review will contribute to a better understanding of the interplay between bruxism and alcohol abuse, shedding light on potential risk factors, mechanisms, and clinical implications. The findings may have significant implications for the prevention, management, and treatment of bruxism, particularly in individuals with a history of alcohol abuse.

A scanning electron microscopy investigation of the precision of three orthodontic bracket slot systems.

OBJECTIVE: One of the most imprortant factors in achieving ideal teeth positions is the precision of the slot dimensions of orthodontic brackets into the archwires are inserted.This study aimed to assess the accuracy of the dimensions of orthodontic bracket slots and molar buccal tube apertures and to compare them with the specifications provided by the manufacturers. METHOD: A total of sixty brackets and ten molar buccal tubes with varying slot heights were examined using a scanning electron microscope from the mesial side. The dimensions and morphology of these bracket slots and buccal tubes apertures were assessed using the AutoCAD Software. A one-sample t-test was conducted to compare the measurements with the values provided by the manufacturer. RESULTS: The findings of the present study indicated that the height of the measured bracket slots and buccal tube apertures dimensions were significantly larger than the actual dimensions and exhibiting divergent walls. On the other hand, the depth of the brackets slots showed significantly smaller values than the actual one. CONCLUSION: A need for careful consideration when selecting a commercially accessible brand for everyday use is essential as certain materials may not meet acceptable standards.

Prevalence of temporomandibular disorders diagnosis in patients treated with Herbst appliance: a systematic review and meta-analysis.

BACKGROUND: The Herbst appliance is an excellent therapy for treating class II malocclusions with increased overjet. Its mechanics involve propelling the mandibular bone using two pistons the patient cannot remove. The so-called bite-jumping keeps the mandible in a more anterior position for a variable period, usually at least 6 months. This appliance does not inhibit joint functions and movements, although there are scientific papers in the literature investigating whether this appliance can lead to temporomandibular disorders. This systematic review aims to evaluate whether Herbst's device can cause temporomandibular diseases by assessing the presence of TMD in patients before and after treatment. METHODS: A literature search up to 3 May 2023 was carried out on three online databases: PubMed, Scopus and Web of Science. Only studies that evaluated patients with Helkimo scores and Manual functional analysis were considered, as studies that assessed the difference in TMD before and after Herbst therapy. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the odds ratio (OR) between the two groups (pre and post-Herbst). RESULTS: The included papers in this review were 60. Fifty-seven were excluded. In addition, a manual search was performed. After the search phase, four articles were considered in the study, one of which was found through a manual search. The overall effect showed that there was no difference in TMD prevalence between pre-Herbst and post-Herbst therapy (OR 0.74; 95% CI: 0.33-1.68). CONCLUSION: Herbst appliance seems not to lead to an increase in the incidence of TMD in treated patients; on the contrary, it appears to decrease it. Further studies are needed to assess the possible influence of Herbst on TMDs.

Pregnancy related factors and temporomandibular disorders evaluated through the diagnostic criteria for temporomandibular disorders (DC/TMD) axis II: a cross sectional study.

INTRODUCTION: Temporomandibular disorder (TMD) is a multifaceted condition impacting the chewing system, with its frequency varying across different age groups and showing a higher incidence in women. The involvement of estrogen in TMD has been examined due to the presence of estrogen receptors in the TMJ area. However, the exact effect of estrogen on TMD is complex. During pregnancy, marked by significant hormonal fluctuations, the impact on TMD has been hypothesized but remains unclear due to inconsistent results from various studies. METHODS: In this cross-sectional study, we enrolled 32 pregnant women consecutively. We gathered information on demographics, TMD evaluations (using the Graded Chronic Pain Scale, Jaw Functional Limitation Scale-20, and Oral Behaviors Checklist), and mental health assessments (including Patient Health Questionnaire-9, Patient Health Questionnaire-15, and Generalized Anxiety Disorder-7). We employed descriptive statistics to summarize continuous and categorical data and used t-tests and chi-square tests for comparisons. We also conducted multivariate linear regression, adjusted for demographic factors, to investigate correlations. RESULTS: The study group mainly consisted of women aged 30-35 (40.6%) and 25-30 (18.8%). Most participants had completed high school (50%) and were married (71.9%). A notable association was found between younger women (under 30) and higher levels of somatic symptoms (p = 0.008) and generalized anxiety (p = 0.015). Women in their second trimester showed lower severity of somatic symptoms (p = 0.04). A significant link was also observed between depression severity and somatic symptom severity (p = 0.01). However, we found no significant correlations with other TMD-related health aspects. DISCUSSION: Our study identified significant associations between psychosomatic and psychological symptoms with variables like age and pregnancy trimester in pregnant women. However, it notably failed to establish a clear relationship between pregnancy-related factors and the severity of temporomandibular disorders (TMD). More comprehensive studies with larger participant pools are necessary to further validate and expand these findings.

Evaluation and assessment of the survival of tooth implant supported prosthesis in tooth and implant supported rehabilitation cases with metal frameworks.

INTRODUCTION: Over the years, implant therapy has been a commonly used treatment option for individuals who are partially or totally edentulous, with a long-term success rate of over 90%. With significant advancements in biomaterials and technology, implant dentistry can now conduct prosthetic rehabilitations in the majority of patients catering to all types of needs. However, in order to meet the demands of a patient base that is always growing, new trends in implantology are emerging in recent years that are focused on minimally invasive surgery and financial sustainability. In certain clinical scenarios, connecting teeth and implants to support fixed partial prosthesis (FPPs) may be a predictable and workable course of treatment. MATERIALS AND METHODS: 22 patients were selected for this study who had tooth and implant supported prosthesis placed as a final restoration. Out of these 22 patients; 12 were male and 10 were female patients. Implants were placed following proper protocol and if grafting procedures were required they were carried out. A second stage surgical procedure was carried out and delayed loading protocols were followed. The statistical analysis was done using the IBM SPSS 24.0, Chicago, USA. The survival of the implants and teeth were measured by the Kaplan Meier survival scale. Bone loss was assessed at baseline(upon loading), 12 months and 24 months. RESULTS: The implant survival rate was measured at 6 months, 12 months, 18 months and 24 months. At 24 months, one implant showed failure, so the survival rate of the implants were 95.4%. Bone loss of 1 mm was seen around one implant at 12 months. Bone loss of 1 and 2 mm was present around two implants and one implant respectively at 24 months. CONCLUSION: From the results of this study, we can conclude that tooth implant supported prosthesis show very good survival when used in rehabilitation cases.

Evaluation and assessment of the wettabilty and water contact angle of modified poly methyl methacrylate denture base materials against PEEK in cast partial denture framework: an in vitro study.

INTRODUCTION: The prevalence of adults with partially dental arches is expected to be more than imagined and patients requiring replacement of missing teeth are slowly increasing in number too. Removable partial dentures are known to provide for substantial replacement for the missing teeth with also added advantages when compared to fixed or implant prosthesis, mainly in elderly patients. Denture base material performance and durability are greatly influenced by wettability and water contact angle. In the case of dentures; adequate moisture distribution is necessary to ensure excellent wettability which has an influence on comfort and oral health. The purpose of conducting this study was to find out whether the advancements made using PEEK (Polyether ether ketone) would prove to be more beneficial than the current upgrades in the current material spectrum. MATERIALS AND METHODS: This study was performed under in vitro conditions. All the fabrication and processing was done only by one operator. The materials used were divided into three groups each comprising 20 samples. Group A was modified polymethylmethacrylate (Bredent Polyan), Group B was polyoxymethylene acetal resin (Biodentaplast) and Group C was PEEK. An Ossila Goniometer was used to measure the contact angle. The three types of liquids used for the testing included distilled water, natural saliva and mouth wetting solution (Wet Mouth Liquid, ICPA India). Human saliva was collected from an individual with no medical conditions and normal salivary secretion. RESULTS: The data was analyzed using One-way ANOVA test and a pairwise comparison using the Post Hoc Tukey's Honest Significant Difference. Table 1 consists of the mean water contact angles of the denture base materials and mean contact angles of various denture base materials. In saliva, mouth wetting solution and distilled water, the highest mean and least mean contact angle was seen in Polyan and Biodentaplast respectively. A signicant difference was seen between PEEK and Polyan and Biodentaplast and Polyan on further comparison. CONCLUSION: From the resources and the materials at our disposal, it could be concluded that Polyan, Biodentaplast and PEEK and could be used as viable options in cast partial denture framework.

Pharmacological therapy in the management of temporomandibular disorders and orofacial pain: a systematic review and meta-analysis.

BACKGROUND: Temporomandibular disorders (TMD) are manifested by soreness in the jaw joint area and jaw muscles, clicks or creaks when opening or closing the mouth. All these symptoms can be disabling and occur during chewing and when the patient yawns or speaks. Several classes of drugs are used to treat symptoms. This review aims to assess which drug suits the different signs. METHODS: Pubmed, Web of Science and Lilacs were systematically searched until 01/02/2023. Clinical trials were selected that dealt with drugs used in temporomandibular dysfunction RESULTS: Out of 830 papers, eight studies were included. The Meta-Analysis with Continuous Outcomes with Pre-Calculated Effect Sizes resulted in the rejection that there is intergroup variability (p.0.74). CONCLUSIONS: Treatment of orofacial pain is still a significant challenge for dentistry. We can conclude that there is no drug of first choice in the treatment of temporomandibular pain. However, the clinician must distinguish the type of pain and the aetioloic cause of the pain so that the patient can be treated and managed pharmacologically.

Prediction of interactomic hub genes in PBMC cells in type 2 diabetes mellitus, dyslipidemia, and periodontitis.

BACKGROUND AND OBJECTIVE: In recent years, the complex interplay between systemic health and oral well-being has emerged as a focal point for researchers and healthcare practitioners. Among the several important connections, the convergence of Type 2 Diabetes Mellitus (T2DM), dyslipidemia, chronic periodontitis, and peripheral blood mononuclear cells (PBMCs) is a remarkable example. These components collectively contribute to a network of interactions that extends beyond their domains, underscoring the intricate nature of human health. In the current study, bioinformatics analysis was utilized to predict the interactomic hub genes involved in type 2 diabetes mellitus (T2DM), dyslipidemia, and periodontitis and their relationships to peripheral blood mononuclear cells (PBMC) by machine learning algorithms. MATERIALS AND METHODS: Gene Expression Omnibus datasets were utilized to identify the genes linked to type 2 diabetes mellitus(T2DM), dyslipidemia, and Periodontitis (GSE156993).Gene Ontology (G.O.) Enrichr, Genemania, and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were used for analysis for identification and functionalities of hub genes. The expression of hub D.E.G.s was confirmed, and an orange machine learning tool was used to predict the hub genes. RESULT: The decision tree, AdaBoost, and Random Forest had an A.U.C. of 0.982, 1.000, and 0.991 in the R.O.C. curve. The AdaBoost model showed an accuracy of (1.000). The findings imply that the AdaBoost model showed a good predictive value and may support the clinical evaluation and assist in accurately detecting periodontitis associated with T2DM and dyslipidemia. Moreover, the genes with p-value < 0.05 and A.U.C.>0.90, which showed excellent predictive value, were thus considered hub genes. CONCLUSION: The hub genes and the D.E.G.s identified in the present study contribute immensely to the fundamentals of the molecular mechanisms occurring in the PBMC associated with the progression of periodontitis in the presence of T2DM and dyslipidemia. They may be considered potential biomarkers and offer novel therapeutic strategies for chronic inflammatory diseases.

Digital denture with mucostatic base and functional borders: A cast-free digital technique.

Digital complete dentures fabricated using a mucostatic impression, like intraoral scans, are desirable for their beneficial effect on long-term residual ridge stability but may have less retention than those fabricated with a mucocompressive impression. Border molding procedure may improve initial retention, thus favoring adaptation to new dentures, especially in cases where neuromuscular dysfunctions may diminish the patient's ability to cope with adapting to existing motor patterns or learn new ones. However, a mucocompressive impression may cause higher residual ridge resorption, thus resulting in a retention decrease over time. A desirable combination would be a digital denture with a mucostatic intaglio surface obtained from intraoral scans and functional borders. A cast-free digital workflow for that is demonstrated in this technical report.

Tooth automatic segmentation from CBCT images: a systematic review.

OBJECTIVES: To describe the current state of the art regarding technological advances in full-automatic tooth segmentation approaches from 3D cone-beam computed tomography (CBCT) images. MATERIALS AND METHODS: In March 2023, a search strategy without a timeline setting was carried out through a combination of MeSH terms and free text words pooled through Boolean operators ('AND', 'OR') on the following databases: PubMed, Scopus, Web of Science and IEEE Explore. Randomized and non-randomized controlled trials, cohort, case-control, cross-sectional and retrospective studies in the English language only were included. RESULTS: The search strategy identified 541 articles, of which 23 have been selected. The most employed segmentation methods were based on deep learning approaches. One article exposed an automatic approach for tooth segmentation based on a watershed algorithm and another article used an improved level set method. Four studies presented classical machine learning and thresholding approaches. The most employed metric for evaluating segmentation performance was the Dice similarity index which ranged from 90 ± 3% to 97.9 ± 1.5%. CONCLUSIONS: Thresholding appeared not reliable for tooth segmentation from CBCT images, whereas convolutional neural networks (CNNs) have been demonstrated as the most promising approach. CNNs could help overcome tooth segmentation's main limitations from CBCT images related to root anatomy, heavy scattering, immature teeth, metal artifacts and time consumption. New studies with uniform protocols and evaluation metrics with random sampling and blinding for data analysis are encouraged to objectively compare the different deep learning architectures' reliability. CLINICAL RELEVANCE: Automatic tooth segmentation's best performance has been obtained through CNNs for the different ambits of digital dentistry.

Impact of periodontitis on circulating cell-free DNA levels as a measure of cardiovascular disease.

OBJECTIVES: The present study aims to assess the serum circulating cell-free (cfDNA) concentrations in patients with periodontitis and cardiovascular disease (CVD) and to evaluate the impact of periodontitis on circulating cfDNA levels and the confounding factors that might mediated the possible relationship. MATERIALS AND METHODS: Healthy controls (n=30) and patients with CVD (n=31), periodontitis (n=31), and periodontitis + CVD (n=30) were enrolled in the present study. All subjects underwent regular periodontal examination and blood sampling and cfDNA evaluation. The analysis of the plasma cfDNA concentrations was performed using a dsDNA Assay Kit. RESULTS: In comparison with healthy controls and CVD patients, periodontitis and periodontitis+CVD exhibited significantly higher expression of circulating cfDNA (p<0.05). There was a positive correlation among plasma cfDNA and clinical attachment loss (CAL) (p=0.019), high sensitivity C-reactive protein (hs-CRP) (p=0.027), and periodontal inflamed surface area (PISA) (p=0.003). Furthermore, the multivariate regression analysis evidenced that PISA (p<0.001), hs-CRP (p=0.014), and full-mouth bleeding score (FMBS) (p=0.004) were significant predictors of circulating cfDNA concentrations. CONCLUSIONS: The results of the study highlighted that the periodontitis and periodontitis + CVD group showed higher circulating cfDNA expression in comparison with healthy controls and CVD patients. Moreover, the extent of periodontitis was correlated with the increased cfDNA levels and represented a significant predictor of the increased circulating cfDNA concentrations. CLINICAL RELEVANCE: Unbalanced circulating cfDNA concentrations have been indicated to represent a possible risk of CVD and endothelial dysfunction. Periodontitis and periodontitis + CVD patients showed higher circulating cfDNA expression; moreover, the extent of periodontitis significantly predicted higher circulating cfDNA concentrations, suggesting the potential increased risk of developing CVD in periodontitis patients.