The Influence of the Gonial Angle on the Initial Biomechanical Stability of the Plate Osteosynthesis in Polyurethane Mandibles With Angle Fractures.

The aim of the present study was to examine the biomechanical stability of the mandibular angle fractures (MAF) fixated with standard titanium miniplates in polyurethane models with different gonial angles (GA). Three custom molds were prepared for 3-dimensional printed mandibles with low, normal and high GA. Twenty polyurethane replicas were cast per group and standard MAFs were created on each sample. Fractures were stabilized with 1 4-hole standard titanium miniplate inserted over the superior alveolar border. Half of the samples were subjected to molar loading and the other half to the incisal loading up until 150 N force magnitude. The load-displacement curves and the horizontal moment arms were recorded and analyzed. The samples with high GA demonstrated greater displacement than those with normal and low GA during molar loading (P < 0.05 for both). After correcting for the effects of the moment arm, the incisal loading also resulted in higher mean displacement in the high GA group than the others (P < 0.05 for both) and the normal GA samples showed higher displacement after 100 N level compared to those in low GA (P < 0.05). Within the limits of this in vitro study, it can be concluded that the MAFs of the polyurethane mandibles with high GA fixated with 1 standard monocortical plate are more likely to demonstrate higher displacement values under the effects of the molar and incisal loadings than do the mandibles with normal and low GA.

Diagnostic Potential of Panoramic Radiography and CBCT in Detecting Implant-Related Ex Vivo Injuries of the Inferior Alveolar Canal Border.

The aim of this ex vivo study was to compare the diagnostic performances of panoramic radiography and cone beam computerized tomography (CBCT) in detecting implant-related injuries of the inferior alveolar canal. Monocortical bone windows were created in 60 fresh sheep hemimandibles, the inferior alveolar canals were revealed and 120 dental implants were inserted. Three types of injuries, described as pilot drill damage (PDRILL), collapsing of the superior border of the canal (COLL), penetration of the implant tip into the canal (PENET) and one control group, were simulated. Standard (PANO) and dentition mode panoramic (PANO-DENT) images as well as CBCT data presented as multiplanar reconstruction (MPR) and cross-sectional (CROSS) views were evaluated by 6 observers who had also expressed their level of confidence to their final diagnosis. Intra- and interobserver agreement scores were rated good. The area under the curve (AUC) values and the confidence scores for CROSS and multiplanar reformation (MPR) views were both significantly higher than those of PANO and PANO-DENT (P < .05 for each) in PDRILL group. In COLL group, observers showed less confidence to PANO and PANO-DENT compared to CROSS and MPR techniques (P < .05 for each). No other significant differences were found. Within the limits of this experimental study, it can be suggested that the standard and dentition modes of panoramic radiography can be as effective as CBCT in the detection of penetrating and collapsing injuries, but multiplanar and cross-sectional views of the CBCT are more accurate than panoramic radiography in the detection of pilot drill injuries in sheep mandible.

The effect of the mandibular plane angle on fracture line stability: An ex vivo experimental study.

BACKGROUND/AIMS: Mandibular angle fractures fixated with plate osteosynthesis techniques have to withstand the effects of muscle attachments. Individual variations in the craniofacial morphology may alter the biomechanical resistance of the bone-plate construct. The aim of the present study was to determine the influence of variations in the mandibular plane angle (MPa) on the biomechanical stability of sheep mandibular angle fractures (MAFs). MATERIALS AND METHODS: Sixty sheep hemi-mandibles were used. The mandibles were positioned on a test jig that simulated low (15°, group L), normal (25°, group N), and high (35°, group H) MPa. Unfavorable MAFs were created with thin diamond cutting disks. One four-hole, 9.0-mm-spacing, standard titanium miniplate of 2.0 mm thickness and 5.0-mm-long screws were inserted at the superior border of the alveolar bone in monoplanar orientation. Specimens were then subjected to vertical loads between 10 N and 150 N in a universal testing machine. The displacement values at each 10 N force increment and the load magnitude at which 3.0 mm displacement limit was reached were recorded. RESULTS: Starting from 40 N, the displacement values at each 10 N increment in the H group were significantly higher than those of the L and N groups until 150 N (P < 0.05). The force magnitude required to reach 3.0 mm of displacement in the H group was significantly lower than that for the L and N groups (P < 0.05 for each). CONCLUSIONS: The one-miniplate monoplanar fixation technique used in sheep MAF with high MPa is more likely to offer lower biomechanical resistance to the vertical forces applied over the molar region than do the normal and low MPa.

Displacement of a Broken Dental Injection Needle Into the Perivertebral Space.

Dental injection needle breakage is an uncommon problem in dental practice. Displacement of the broken fragment into anatomical spaces is, on the other hand, a serious complication that occurs most commonly during inferior alveolar nerve blocks as a result of material wear, incorrect application of the anesthesia technique, or sudden movement of the patient during injection. Further complications such as infection, trismus, and nerve paralysis may exacerbate the condition and, if not treated adequately, life-threatening conditions may develop over time as the fragment dislodges deeper in soft tissues. Clinical symptoms of the patient, as well as the findings gathered from detailed physical examination and radiographic evaluation, are important factors to consider before performing an exploratory surgery. Removal of a broken needle may be troublesome due to its proximity to vital anatomic structures. Multislice computed tomography is a reliable imaging modality that provides accurate information to pinpoint the exact location of the needle fragment.This report describes a case of needle breakage occurred during inferior alveolar nerve block which was performed to extract a third molar tooth and the migration of the broken fragment from the right mandibular ramus area into the perivertebral space, with special emphasis on the surgical retrieval technique with multiplanar computed tomography imaging guidance.

Do Cone Beam CT Picture Archiving and Communication Systems Viewer Interfaces Meet the Expectations of Dental Professionals From a Usability Perspective?

Background Cone beam computed tomography (CBCT) has revolutionized dental and maxillofacial imaging by providing high-resolution 3D visualizations, essential for accurate diagnosis and treatment planning. Despite its clinical advancements, the usability of CBCT viewer interfaces, which play a crucial role in the effective interpretation of imaging data, remains a critical concern. Objective This study aims to evaluate the usability of a CBCT viewer interface in clinical settings, focusing on the effectiveness, efficiency, and satisfaction perspectives, to identify potential areas for improvement. Methods Twenty-two participants (N=22) were assigned the task of locating the mental foramen in a mandible dataset, selected randomly, using the multiplanar reconstruction (MPR) mode of a CBCT viewer interface on a local network. The task's effectiveness was gauged by the completion rate, while efficiency was measured through the duration of the task, the number of mouse clicks, and the cursor's path in both pixels and meters. Satisfaction or perceived usability was evaluated using the system usability scale (SUS-TR), and computer system usability questionnaire (T-CSUQ), among other scales, with participants also providing open-ended feedback. Demographic characteristics served as classification variables. Results All participants completed the given task. No demography-related differences in efficiency were observed. Perceived usability (SUS-TR: 60.68±19.58, T-CSUQ: 43.63±16.34) was below the industry standards, categorizing the system as a detractor. Commonly reported issues included accessing the MPR window, cursor behavior, and unclear error messages. The mean SUS-TR score negatively correlated with efficiency-related variables (p<0.05 for each). Conclusions The study's findings indicate that the CBCT viewer interface does not fully meet dental professionals' usability expectations, as evidenced by the task's completion rate, efficiency metrics, and below-average usability scores. Despite the successful task completion by all participants, the identified issues in interface design, such as difficulties in accessing the MPR window and unclear error messages, highlight significant areas for improvement. To enhance user satisfaction and efficiency, future developments of CBCT viewer interfaces should incorporate feedback from end-users and prioritize user-friendly design principles.

The biomechanical stability of miniplate osteosynthesis configurations in bilateral mandibular angle fractures.

PURPOSE: The present study investigated the biomechanical stability of three miniplate osteosynthesis configurations used for internal fixation of bilateral mandibular angle fracture (BMAF). METHODS: Standard fracture lines were created in 72 polyurethane mandibles and stabilized with 2.0-mm, 4-hole standard titanium miniplates and monocortical screws. The group descriptions and miniplate configurations were: 2Plates (1-1), 3Plates (1-2) and 4Plates (2-2). The mandibles were subjected to either incisal or molar loads (from both sides in the 3Plates group) up to a force of 120 N. The displacements of the constructs were recorded at each force increment of 10 N. ANOVA and Tukey's post-hoc tests were used for statistical analysis. RESULTS: The 2Plates group showed higher displacement under both loading conditions (P < 0.05 for each). The same group reached displacement levels of 1 mm and 3 mm during molar loading and 1 mm, 3 mm, and 5 mm during incisal loading at lower force magnitudes relative to others (P < 0.05 for each). CONCLUSION: Bone-plate constructs for BMAFs stabilized with three or four standard miniplates are more likely to provide similar resistance when subjected to incisal or molar loads, in contrast to the two-miniplate configuration, which is relatively more prone to displacement.

Detection of crestal radiolucencies around dental implants: an in vitro experimental study.

PURPOSE: The aim of this study was to compare the diagnostic potentials and practical advantages of different imaging modalities in detecting bone defects around dental implants. MATERIALS AND METHODS: Crestal bone defects with sequentially larger diameters were randomly prepared around 100 implants that were inserted in bovine bone blocks. Conventional periapical radiography (PR), direct digital radiography (DDR), panoramic radiography (PANO), cone-beam computed tomography (CBCT), and multislice computed tomography (MSCT) were performed for all specimens. The diagnostic accuracies of the devices, confidence of the answers, subjective image quality, defect visibility in planar orientations, and duration of diagnosis were analyzed based on the interpretations of 7 calibrated observers. RESULTS: The agreement levels of intra- and interobserver scores were rated good. PR, DDR, and CBCT were mostly more accurate than PANO and MSCT (P < .05). Confidence levels were positively correlated with the defect size (ρ = 0.20, P < .01), and that of DDR was the highest (P < .05). The subjective image quality of PR and DDR was higher than that of CBCT, PANO, and MSCT (P < .05 for all comparisons). Axial-coronal-sagittal visibilities of the defects were higher for CBCT compared with MSCT (P < .05). The diagnostic time was shorter for DDR (P < .05) and longer for the tomographic systems (P < .05) than for the other devices. CONCLUSIONS: DDR may provide a faster and more confident diagnostic option that is as accurate as PR in detecting peri-implant radiolucencies. CBCT has a comparable potential to these intraoral systems but with slower decision making and lower image quality, whereas PANO and MSCT become more reliable when bone defects have a diameter that is at least 1.5 mm larger than that of the implant.

The influence of hyperbaric oxygen treatment on the healing of experimental defects filled with different bone graft substitutes.

To assess potential effects of hyperbaric oxygen (HBOT) on artificial bone grafts, ß - Tricalcium phosphate (ß-TCP) and calcium phosphate coated bovine bone (CPCBB) substitutes were applied to standard bone defects in rat tibiae. The control defects were left empty. Half of the animals received 60 minutes of 2.4 atmosphere absolute (ATA) of HBOT. Rats were sacrificed at one, two and four weeks. Bone healing was assessed histologically and histomorphometrically using light microscopy. The periosteum over the bone defects was examined ultrastructurally. Cardiac blood was collected to determine the serum osteocalcin levels. The HBOT increased new bone formation in the unfilled controls and ß-TCP groups and significantly decreased cartilage matrix and fibrous tissue formations in all groups. Active osteoblasts and highly organized collagen fibrils were prominent in the periosteum of ß-TCP and control groups. Serum osteocalcin levels also increased with HBOT. The healing of defects filled with CPCBB was similar to the controls and it did not respond to HBOT. These findings suggested that the HBOT had beneficial effects on the healing of unfilled bone defects and those filled with ß-TCP bone substitute but not with CPCBB, indicating a material-specific influence pattern of HBOT.

Assessment of dental fear and anxiety levels in eating disorder patients undergoing minor oral surgery.

PURPOSE: The aim of the present study was to evaluate the levels of dental fear and anxiety in women with eating disorders (EDs) scheduled for oral surgery. PATIENTS AND METHODS: A total of 61 patients with EDs, an identical number of age-, gender-, and education-matched healthy controls, and 2 consecutive, randomly selected, clinical and nonclinical samples each consisting of 220 female subjects were included in the present study. The participants completed the demographic and clinical forms, as well as the modified dental anxiety scale (MDAS) and dental fear survey (DFS) before the surgical procedure. RESULTS: The mean scores of the MDAS and DFS for the study population correlated negatively with age and positively with a previous unpleasant experience related to dentistry (P < .01 for both). Patients with EDs had significantly greater mean scores on the MDAS than the clinical and nonclinical groups (P < .05 for both). Their mean scores on the DFS were significantly greater than those for the nonclinical participants (P < .05). A significant difference was found in the DFS subscale "fear of specific situations and stimuli" compared with the healthy matched controls and clinical and nonclinical subjects (P < .05 for all). CONCLUSION: The results of our study have shown that patients with EDs can be more sensitive to the auditory, visual, and contact stimuli of the oral surgery procedures under local anesthesia. They also had greater levels of dental fear and anxiety than routine clinical patients and randomly selected subjects from a nonclinical environment.

A comparison of panoramic radiography and cone beam computed tomography in the detection of osteosynthesis complications in sheep mandibular angle fractures.

OBJECTIVE: The aim of this study was to compare the diagnostic efficacy of panoramic radiography (PANO) and cone beam computed tomography (CBCT) in detecting simulated complications of plate osteosynthesis applied to mandibular angle fractures (MAFs). STUDY DESIGN: Unfavorable MAFs were created in 100 fresh sheep hemimandibles. Fractures were fixed with 4-hole titanium miniplates and screws. Bone necrosis around the screws, penetration of the screw into the inferior alveolar canal, screw loosening, and plate breakage were simulated. The diagnostic efficacy of the imaging techniques was compared by using intra- and interobserver agreement scores and area under the receiver operating characteristic curve (AUC) values. Examination time (ET), confidence scores (CS), and planar preference (PP) in CBCT evaluation were assessed. RESULTS: Intra- and interobserver agreement scores varied between 0.61 and 0.91. AUCs for screw penetration into the inferior alveolar canal and screw loosening were significantly higher in CBCT than in PANO (P < .05). CBCT presented significantly higher ET and CS values compared with PANO (P < .05). PP showed significant differences among types of complications (P < .05). CONCLUSIONS: PANO provided acceptable outcomes in the detection of bone necrosis and broken plates around the screw, but CBCT was more likely to enable detection of all simulated types of complications with higher confidence.

The effects of supplemental melatonin administration on the healing of bone defects in streptozotocin-induced diabetic rats

ABSTRACT Diabetes mellitus (DM) causes an increased production of free radicals that can impair bone healing. Melatonin is a hormone secreted mainly by the pineal gland, which participates in the neutralization process of free radicals. Objective The aim of this study was to investigate histologic and biochemical effects of supplemental melatonin administration on bone healing and antioxidant defense mechanism in diabetic rats. Material and Methods Eighty-six Sprague-Dawley male rats were used in this study. Diabetes mellitus was induced by intraperitoneal (i.p.) administration of 65 mg/kg streptozotocin (STZ). Surgical bone defects were prepared in the tibia of each animal. Diabetic animals and those in control groups were treated either with daily melatonin (250 μg/animal/day/i.p.) diluted in ethanol, only ethanol, or sterile saline solution. Rats were humanely killed at the 10th and 30th postoperative days. Plasma levels of Advanced Oxidation Protein Products (AOPP), Malondialdehyde (MDA), and Superoxide Dismutase (SOD) were measured. The number of osteoblasts, blood vessels and the area of new mineralized tissue formation were calculated in histologic sections. Results At the 10th day, DM+MEL (rats receiving both STZ and melatonin) group had significantly higher number of osteoblasts and blood vessels as well as larger new mineralized tissue surfaces (p<0.05 for each) when compared with DM group. At the 30th day, DM group treated with melatonin had significantly lower levels of AOPP and MDA than those of DM group (p<0.05). Conclusion Melatonin administration in STZ induced diabetic rats reduced oxidative stress related biomarkers and showed beneficial effects on bone healing at short term.

The influence of secondary reconstruction slice thickness on NewTom 3G cone beam computed tomography-based radiological interpretation of sheep mandibular condyle fractures.

OBJECTIVE: The objective of this study was to examine the diagnostic accuracy of the different secondary reconstruction slice thicknesses of cone beam computed tomography (CBCT) on artificially created mandibular condyle fractures. METHODS: A total of 63 sheep heads with or without condylar fractures were scanned with a NewTom 3G CBCT scanner. Multiplanar reformatted (MPR) views in 0.2-mm, 1-mm, 2-mm, and 3-mm secondary reconstruction slice thicknesses were evaluated by 7 observers. Inter- and intraobserver agreements were calculated with weighted kappa statistics. The receiver operating characteristic (ROC) curve analysis was used to statistically compare the area under the curve (AUC) of each slice thickness. RESULTS: The kappa coefficients varied from fair and to excellent. The AUCs of 0.2-mm and 1-mm slice thicknesses were found to be significantly higher than those of 2 mm and 3 mm for some type of fractures. CONCLUSION: CBCT was found to be accurate in detecting all variants of fractures at 0.2 mm and 1 mm. However, 2-mm and 3-mm slices were not suitable to detect fissure, complete, and comminuted types of mandibular condyle fractures.

Protective effects of prenatal administration of folic acid on retinoic acid-induced cellular damages of Meckel's cartilage in rats.

Craniofacial malformations are among the most common congenital deformities. Meckel's cartilage plays a major role in the development of the mandible and is highly susceptible to maternal teratogenic drug use. We therefore investigated possible protective effects of prenatal administration of folic acid on a retinoic-acid induced maxillofacial defect model. Sprague-Dawley pregnant female rats (n=36) were used in this study. Retinoic acid was administered orally at the dose of 40, 60, or 80 mg/kg respectively on gestational day 8. Folic acid of 4.0 mg/kg was injected intraperitoneally on 7th, 8th and 9th days of pregnancy. Animals were sacrificed on the day 17th. Administration of retinoic acid at all doses resulted in statistically significant decreases in mean fetal weight and mean fetal height and the increase in mortality rate, and caused severe ultrastructural damages in Meckel's cartilage. Folic acid administration prevented the decrease in mean fetal weight and height of the embryos treated with retinoic acid of 40 mg/kg. In addition, there was a marked decrease in the number of degenerated chondrocytes and an improvement in the structure of granular endoplasmic reticulum along with intact nuclei. We conclude that folic acid has protective effects on retinoic acid-induced intracellular damages in Meckel's cartilage.