A 2-Stage Reconstruction of the Jaw Using Vascularized Bone and Secondary Alveolar Ridge Augmentation With Particulate Cancellous Bone and Marrow.

PURPOSE: To present the novel technique for reconstruction of the jaw, that facilitates occlusal restoration using dental implants, in cases with wide bony defects from tumor resection. MATERIALS AND METHODS: After alveolar ridge is augmented using titanium mesh tray and particulate cancellous bone and marrow (PCBM) from iliac bone on reconstructed bone, by way of improvement of maxillomandibular relationship for dental implants. RESULTS: This 2-stage surgery underwent successfully in 3 cases. After 2-stage surgery and occlusal reconstruction using dental implant, the patients experienced no complications, and received satisfaction with results functionally and aesthetically. CONCLUSIONS: Our results suggest that, in cases where bone defect is over a wide area, in addition to vascularized bone grafts, secondary alveolar ridge augmentation using a titanium mesh tray and PCBM on grafted bone can provide satisfactory occlusion further to improvement of facial form.

Clinical presentation of epignathus teratoma with cleft palate; and duplication of cranial base, tongue, mandible, and pituitary gland.

A 2-day-old girl was diagnosed with an oral epignathus teratoma and an uncommon combination of orofacial malformations including cleft palate; tongue, mandible, cranial base, cervical vertebrae, lower lip, and pituitary gland duplications; and fistula of the glabella and lower lip. Computed tomography revealed that the mass within the nasal cavity had tooth-like calcifications and protruded into the nasopharynx and oral cavity. It was implanted on the anterior wall of the body of the sphenoid bone and was accompanied with mandibular duplication. Magnetic resonance imaging detected duplication of the pituitary gland and confirmed the absence of intracranial communication of the nasopharyngeal mass. The teratoma did not cause respiratory obstruction; however, the patient required continuous nasogastric tube feeding. Usually, an epignathus teratoma is associated with few midline defects and can be corrected with multiple interventions at different time points. The current study describes the surgical procedure comprising excision of the tumor along with reconstructive surgeries of the mandible, tongue, and fistulae undertaken when the infant reached 7 months of age. The cleft palate was repaired at 18 months of age using the Kaplan buccal flap method. Histopathologic examination confirmed a grade 0 teratoma covered with keratinized skin and containing pilosebaceous and sweat glands, adipose tissue, and smooth muscle. The long-term success of this intervention was determined at the follow-up examination conducted at 3 years of age, with no signs of the teratoma recurrence observed.

Evaluation of mandibular hypoplasia in patients with hemifacial microsomia: a comparison between panoramic radiography and three-dimensional computed tomography.

OBJECTIVE: To compare the accuracy of three-dimensional computed tomography (3D-CT) and panoramic radiography in the evaluation of mandibular hypoplasia in patients with hemifacial microsomia (HFM). DESIGN: Retrospective study of imaging data. Setting : Images selected from the archives of the University of Tokyo Hospital. SUBJECTS: Twenty patients with unilateral HFM who had undergone both panoramic radiography and 3D-CT in the same period. METHOD: Mandibular deformities were classified according to the Pruzansky classification; eight patients had Grade I deformity and 12 patients had Grade II deformity. Ramus heights were measured on both panoramic radiographs and 3D-CT. MAIN OUTCOME MEASURES: Magnification in panoramic radiographs and extent of mandibular asymmetry as estimated by the affected/unaffected side ratio based on two methods were examined. The Pearson product-moment correlation coefficient was used to estimate correlations between parameters. RESULTS: The magnification of ramus heights on panoramic radiographs showed large variations in Grade II patients. The affected/unaffected side ratio estimated by the two methods showed a strong correlation in Grade I patients (correlation coefficient 0.99; p < .0001). Conversely, a weak correlation was seen in Grade II patients (correlation coefficient 0.77; p  =  .0036), and affected/unaffected side ratios from panoramic radiographs were both over- and underestimated. CONCLUSIONS: The accuracy of evaluation using panoramic radiography was fairly reliable in Grade I patients. Conversely, accuracy was poor in Grade II patients, and evaluation using 3D-CT seems preferable. The combination of two methods with careful consideration is recommended for clinical applications.

Long-term dental outcomes in patients with fibrodysplasia ossificans progressiva: a report of three cases of tooth extraction.

Fibrodysplasia ossificans progressiva (FOP) is an extremely rare autosomal dominant disorder characterized by congenital skeletal malformation and progressive heterotopic ossification. In the oral and maxillofacial region, deformity of the temporomandibular joint is a common feature of FOP, as well as restricted mouth opening derived from heterotopic ossification in the masticatory muscles. Since surgical procedures are generally not recommended because of the risk of flare-ups and increased heterotopic ossification, reports of tooth extractions and their outcomes in patients with FOP are limited. The present article reports the long-term oral outcomes of three Japanese patients with FOP, in whom the teeth were deliberately extracted to avoid the risk of oral inflammation causing further heterotopic ossification. The extractions were conducted under local or general anesthesia, and healing of sockets was nonproblematic with the formation of new bone. Undesirable events, including progression of heterotopic ossification in the oral and maxillofacial region and further restriction of mouth opening, were not apparent. The extractions also alleviated the existing inflammation, contributing to maintaining their oral hygiene. These cases suggest that deliberate planning and judicious surgery could induce favorable healing after tooth extractions in patients with FOP, leading to long-term stability of their oral health status.

Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology.

Ideally, artificial bones should be dimensionally compatible with deformities, and be biodegradable and osteoconductive; however, there are no artificial bones developed to date that satisfy these requirements. We fabricated novel custom-made artificial bones from alpha-tricalcium phosphate powder using an inkjet printer and implanted them in ten patients with maxillofacial deformities. The artificial bones had dimensional compatibility in all the patients. The operation time was reduced due to minimal need for size adjustment and fixing manipulation. The postsurgical computed tomography analysis detected partial union between the artificial bones and host bone tissues. There were no serious adverse reactions. These findings provide support for further clinical studies of the inkjet-printed custom-made artificial bones.

Clinical application of artificial bone in the maxillofacial region.

Hard tissue reconstruction is very useful for bony defects of the maxillofacial region. Autogenous bone, allogeneic bone, and artificial bone have been used to reconstruct maxillofacial bone; however, the use of autogenous bone involves high surgical invasiveness because of the need to harvest the bone. The use of allogeneic bone is associated with infections, raises ethical concerns, and is not widely used in Japan. Artificial bone has several advantages, including no need for bone harvesting, excellent biocompatibility, and a relatively easy surgical procedure. Use of artificial bone avoids the much greater invasiveness of harvesting bone, and several types of artificial bone have been developed. Design requirements for artificial bone include surgical manipulability, structural compatibility with the defective area, support properties, and the ability to induce bone regeneration; however, no artificial bone meeting all these requirements has yet been developed. Artificial bone is used in many patients in our medical center, and we have been active in developing the next generation of artificial bone with better properties. In this article, we present a case history and discuss the future development of artificial bone for use in maxillofacial reconstruction.

Clinical experience of full custom-made artificial bones for the maxillofacial region.

INTRODUCTION: Autologous, allogeneic, and artificial bones are clinically applied as graft materials for bone reconstruction, with each having their own advantages and disadvantages. Although artificial bones with various shapes are currently available, a product with a morphology that may be freely modified by operators has not yet been developed. In the present study, we developed a full custom-made artificial bone, and applied it to form the maxillofacial region. We herein report treatment outcomes. METHODS: An artificial bone was prepared on a 3-dimensional solid model, and data of its shape was collected on CT. A full custom-made artificial bone was prepared by laminating α-tricalcium phosphate powder using an aqueous polysaccharide curing solution and the ink-jet powder-laminating device, Z406 3D Printer (DICO, USA). Subjects comprised patients who underwent maxillofacial plasty using this artificial bone between March 2006 and September 2009. RESULTS: Maxillofacial plasty using the full custom-made artificial bone was applied to 23 regions in 20 patients (14 females and 6 males). The recipient region was the maxilla in 3, mandibular ramus in 13, mental region in 7, and frontal bone in 1. Postoperative courses were favorable in 18 out of the 23 regions; however, the fit was insufficient in 2 regions and the recipient regions were exposed within 1 year after surgery. Three regions were exposed 1 year or more after surgery. CONCLUSION: We developed a novel reconstruction method using a full custom-made artificial bone. Its fit with the recipient bone was considered to be important, since an ill fit between the recipient and artificial bones potentially resulting in the artificial bone being detached. Therefore, fixation is important in order to prevent the detachment, and careful course observations are required when an ill fit is concerned during the follow-up period.

Surgical management of odontogenic myxoma: a case report and review of the literature.

BACKGROUND: Odontogenic myxoma is a benign odontogenic tumor with locally aggressive behavior, and is relatively rare in the oral cavity. There are currently no clear surgical management guidelines for odontogenic myxoma, and a variety of approaches may be used. This study evaluated the literature concerning the surgical management of odontogenic myxoma, and reports the long-term outcome of a case managed by using a more conservative surgical approach. CASE PRESENTATION: We managed a 40-year-old Japanese man with odontogenic myxoma in the right mandible by enucleation and curettage, a relatively conservative approach that has proved to have been justified by a lack of recurrence over 10 years. Our strategy was compared with others reported in the literature, which was identified by a PubMed search using the term "odontogenic myxoma". Articles without full text or with missing data were excluded. The age and sex of patients, the tumor location (maxilla/mandible), treatment (conservative/radical), recurrence, and follow-up period were compared in the reported cases that we evaluated. From the initial 211 studies identified, 20 studies qualified as mandibular cases of odontogenic myxoma. Recurrence was reported in three cases that had been treated with a more conservative surgical approach. CONCLUSIONS: Enucleation and curettage has proved an effective approach in several cases in ours there has been no recurrence more than 10 years after surgery but the risk of recurrence appears to be higher. We discuss the important factors that must be considered when determining the correct management approach to odontogenic myxoma.

A Case of Odontogenic Infection by Streptococcus constellatus Leading to Systemic Infection in a Cogan's Syndrome Patient.

Odontogenic infection in immunocompromised patients tends to extend systemically beyond the oral cavity. Our case report presents a patient with sepsis due to a Streptococcus constellatus (S. constellatus) odontogenic infection in a 64-year-old-immunocompromised woman with Cogan's syndrome. She had been suffering from chronic mandibular osteomyelitis which was thought to have been caused by dental caries and/or chronic periodontitis with furcation involvement of the left mandibular first molar. We suspect that the acute symptoms of the chronic osteomyelitis due to S. constellatus led to the systemic infection. This infection could be accelerated by the use of a corticosteroid and an alendronate. This is the first report which represents the potential association between odontogenic infection and Cogan's syndrome.

Submucous cleft palate: variations in bony defects of the hard palate.

We have analysed bony defects of the hard palate in patients with submucous cleft palate to find out whether velopharyngeal insufficiency (VPI) is dependent on the extent of these defects. We evaluated the maxillofacial structures associated with cleft palate by 3-dimensional computed tomography (CT) in 23 children diagnosed with submucous cleft palate. Bony defects of the hard palate were divided into Type I, defined as absent posterior nasal spine (n=12), Type II, V-shaped bony notch (moderate, n=7), and Type III, as bony defect extending into the incisive foramen (severe, n=4) defects, respectively. VPI was found in 10, 3, and 4 patients, respectively. Neither VPI nor the degree of bifid uvula was significantly associated with the types of bony defects.

Treatment of ankylosed maxillary central incisors by single-tooth dento-osseous osteotomy and alveolar bone distraction.

When tooth ankylosis occurs in growing children, the ankylosed tooth fails to erupt and gradually positions itself below the occlusal plane. This causes functional and esthetic problems, and orthodontic treatment is often impossible. To clarify this problem, we developed a new treatment protocol for the movement of ankylosed teeth. This consists of single-tooth dento-osseous osteotomy and alveolar bone distraction using orthodontic multibracket appliances. A special distraction device is not required, thus reducing the burden to patients. Two cases in which an ankylosed maxillary central incisor was successfully treated with this protocol are presented.

Metastasis of hepatocellular carcinoma into the mandible with radiographic findings mimicking a radicular cyst: a case report.

INTRODUCTION: Hepatocellular carcinoma (HCC) is a common neoplasm worldwide, with more than half of the tumors associated with regional metastasis. Extrahepatic metastasis is also common, and the most frequently affected sites are the lungs, abdominal lymph nodes, diaphragm, and bone. However, HCC metastasis to the mandible is rare, with approximately 50 cases reported in the literature. METHODS: In this report, we describe a case of HCC metastasis to the mandible at the apex of #18 root in a 62-year-old man. This patient had already been diagnosed with metastasis to pancreatic caput lymph node. The radiographic features of the mandible resembled radicular cyst and did not show typical findings of malignancy. RESULTS: Under the first diagnosis of radicular cyst, root canal treatment was initially performed, and then surgical treatment of the removal of the cystic lesion and #18 extraction were performed. Finally, the lesion was diagnosed as HCC metastasis from pathological examination. Consequently, he received constitutional chemotherapy in the hepatitis unit and is now in remission. CONCLUSION: This case shows the importance of considering the differential diagnosis of malignancy.

Evaluation and analysis of formation of bone at the palate in patients with cleft lip and palate after palatoplasty based on computed tomograms and three-dimensional data.

There are various techniques for palatoplasty, but no studies of postoperative osteogenesis at the palatal fissure. In the cranial and maxillofacial region it is thought to develop from the periosteum, so palatoplasty with mucoperiosteal flaps may encourage new bone to form at the fissure. We evaluated the status of osteogenesis in the hard palate after palatoplasty on computed tomograms (CT). We studied 29 patients (22 boys and 7 girls) with unilateral cleft lip and palate who had pushback palatoplasty with the use of CT obtained between May 2003 and March 2007. Age at the time of operation was recorded. The width of the palatal fissure at the first premolar, the first molar, and the maxillary posterior region were measured on coronal CT. The mean (SD) age at the time of palatoplasty was 16 (2) months. The mean (SD) width of the fissure at the first molar was 3.96 (3.1) mm, and bony union was seen in four patients. The width of the fissure was significantly less at the first molar than at the other sites (p = 0.006). The shape of the margin of the fissure was irregular in nearly all patients. The width of the fissure at the first molar became significantly less, suggesting that osteogenesis had occurred. In some patients the height of the fissure differed. Given the results of previous studies, bony regeneration from the periosteum most likely happens together with regeneration from the margins of the fissure.

Pagetoid spread to oral mucosa from submandibular gland salivary duct carcinoma: a case report.

Salivary duct carcinoma is a high-grade malignant tumor arising predominantly in the major salivary glands. We describe herein a rare presentation of salivary duct carcinoma arising in the submandibular gland and showing pagetoid spread to the oral mucosa. A 46-year-old man was admitted with a 2-year history of swelling in the floor of the mouth. Resection of the submandibular gland tumor was followed by mucosal biopsy around the aperture of the right Wharton's duct. The tumor recurred in the oral mucosa with pagetoid spread and extended widely in the oral cavity for the following 10 years, despite chemo- and radiotherapy. Mucosal spread, although a relatively remote possibility, can occur in the setting of salivary duct carcinoma.

Evaluation of 15 mandibular reconstructions with Dumbach Titan Mesh-System and particulate cancellous bone and marrow harvested from bilateral posterior ilia.

This study reports on 15 mandibular reconstructions using the Dumbach Titan Mesh-System and particulate cancellous bone and marrow harvested from bilateral posterior ilia. All cases showed segmental defects. Eleven cases involved patients with malignant tumor. Six patients had received irradiation of 40-50 Gy. Reconstructions were performed immediately in 1 patient and secondarily in the remaining 14 patients. In 13 cases, mandibles were successfully reconstructed. Of these 13 patients, 9 reconstructions were completed without complications, whereas the other 4 cases showed complications. In 2 cases, reconstruction failed completely. Overall success rate was 87%. Statistical analysis revealed the extent of mandibular defect, but not malignancy of the original disease or radiotherapy of