Heating of metallic orthodontic devices during anti-aging treatment with vacuum and electromagnetic fields: In vitro study.

BACKGROUND: The physical appearance of an individual plays a primary role as it influences the opinion of the viewer. For this reason, orthodontic therapy to improve perceived aesthetics is in high demand among patients. This factor, combined with the increase in the number of non-invasive facial aesthetic treatments, has led to the need to understand potential risk factors in the application of medical devices to the perioral skin in patients with fixed orthodontic appliances. The aim of this study was to evaluate in vitro heating of the orthodontic bracket following electromagnetic fields and negative pressure (V-EMF) used as an anti-aging treatment. METHODS: Two different types of titanium alloy wires, one made of "beta-Titanium" alloy and the other "Ni-Ti" (DW Lingual Systems GmbH-Bad Essen-Germany) were used. The orthodontic wires and brackets mounted on a resin mouth were covered with porcine muscle tissue, then subjected to anti-aging therapy with a Bi-one LifeTouchTherapy medical device (Expo Italia Srl-Florence-Italy) which generates a combination of vacuum and electromagnetic fields (V-EMF) already adopted for antiaging therapy. During administration of the therapy, the orthodontic brackets and porcine tissue were thermally monitored using a Wavetek Materman TMD90 thermal probe (Willtek Communications GmbH-Germany). In total 20 orthodontic mouths were used, 10 with Beta Titanium wires and 10 with Nickel Titanium wires. RESULTS: A temperature increase of about 1°C was recorded in each group. The outcome of the present research shows that the absolute temperatures measured on orthodontic appliances, which, despite having a slightly different curve, both show an increase in temperature of 1.1°C at the end of the session, thus falling well within the safety range of 2°C as specified by the standard CENELEC EN 45502-1. Therefore, V-EMF therapy can be considered safe for the entire dental system and for metal prostheses, which tend to heat up at most as much as biological tissue (+0.9°C/1.1°C vs. 1.1°C/1.1°C). CONCLUSION: In conclusion, anti-aging therapy with V-EMF causes a thermal increase on orthodontic brackets that is not harmful to pulp health.

Medication-related osteonecrosis of the jaw triggered by endodontic failure in oncologic patients.

OBJECTIVES: To describe the association between endodontic treatment failure and medication-related osteonecrosis of the jaw (MRONJ) in a cohort of oncologic patients in therapy with antiresorptive and antiangiogenic drugs. MATERIALS AND METHODS: Patients were selected as affected by MRONJ in absence of the common local risk factors (oral surgical procedures or ill-fitting dentures) but showing failure of previous endodontic treatment performed at least 6 months before the starting of antiresorptive/antiangiogenic therapies. Jaw lesions were all surgically treated and patients underwent a strict clinical and radiological follow-up. RESULTS: Among 18 patients, who developed 18 MRONJ, the only detectable local risk factor was the presence of teeth with failed endodontic treatment (more precisely, root canal underfilling in eight cases, root canal overfilling in two cases, root perforation in three cases, root fracture in five cases). All patients completely healed after surgical procedure and no recurrence was observed. CONCLUSIONS: Endodontic treatment failure should be considered a local risk factor for MRONJ development in oncologic patients. For such reason, it is mandatory to carefully evaluate them prior than the beginning of antiresorptive and antiangiogenic drugs administration.

Correlation between use of different type protective facemasks and the oral ecosystem.

BACKGROUND: Spread worldwide through droplets, the Virus Sars-Cov-19 has caused a global health emergency alarm. In order to limit its spread, the use of masks has become part of the daily life of the entire population, however, little is known about its constant use and the changes generated in the oral cavity. This work aims to investigate correlations between the continuous use of masks covering the nose and mouth for 3 h and changes in the ecological factors of the oral cavity. METHODS: 34 volunteers were divided into 2 groups: wear only the filtering facepiece code 2 (FFP2) mask (Group A) and wear the FFP2 mask covered by a surgical mask (Group B). Measurement of Volatile Organic Compounds (VOCs), saliva rehydration and consistency test, collection of basal saliva and saliva stimulated with paraffin gum and mucosal swab were collected and analyzed at two times: before using the mask(s) (T0) and 3 h after continuous use of the mask(s) (T1). RESULTS: The results indicated a significant difference between the groups, in which the basal saliva volume and pH and the peaks of VOCs increased for group B between T0 and T1. The rehydration time decreased and the volume and pH of the stimulated saliva increased, but with no significant difference between the groups. Furthermore, group B showed a significant decrease in Candida albicans Colony Forming Units (CFUs) and Total Bacterial Count (TBC) between T0 and T1. CONCLUSION: It is concluded that the prolonged use of the FFP2 mask covered by a surgical mask can generate oral alterations in the user.

Cannabidiol for Oral Health: A New Promising Therapeutical Tool in Dentistry.

The medical use of cannabis has a very long history. Although many substances called cannabinoids are present in cannabis, Δ9tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD) and cannabinol (CBN) are the three main cannabinoids that are most present and described. CBD itself is not responsible for the psychotropic effects of cannabis, since it does not produce the typical behavioral effects associated with the consumption of this drug. CBD has recently gained growing attention in modern society and seems to be increasingly explored in dentistry. Several subjective findings suggest some therapeutic effects of CBD that are strongly supported by research evidence. However, there is a plethora of data regarding CBD's mechanism of action and therapeutic potential, which are in many cases contradictory. We will first provide an overview of the scientific evidence on the molecular mechanism of CBD's action. Furthermore, we will map the recent developments regarding the possible oral benefits of CBD. In summary, we will highlight CBD's promising biological features for its application in dentistry, despite exiting patents that suggest the current compositions for oral care as the main interest of the industry.

Research efficacy of gaseous ozone therapy as an adjuvant to periodontal treatment on oxidative stress mediators in patients with type 2 diabetes: a randomized clinical trial.

BACKGROUND: Chronic inflammation and cumulative oxidative stress have been theorized as two common pathways of the interconnection between periodontitis and diabetes. Improvement in oxidizing status has been demonstrated in periodontal patients with diabetes treated with proper non-surgical periodontal treatment. In addition to periodontal treatment, Gaseous ozone therapy has been reported to possess anti-inflammatory properties and the ability to stimulate the endogenous antioxidant defence mechanism. To date, the antioxidant effect of gaseous ozone, in addition with periodontal treatment in diabetic patients, has been examined in only one study. The aim of this study was to determine the efficacy of gaseous ozone therapy as an alternative approach to supporting non-surgical periodontal therapy (NSPT), aimed at improving antioxidant machinery and interfering with ROS production on plasma levels in diabetic individuals diagnosed with moderate or severe periodontitis. METHODS: One hundred and eighty patients with periodontitis and type 2 diabetes mellitus were randomly assigned to receive non-surgical periodontal treatment (NSPT) plus gaseous ozone therapy (A) NSPT alone (B). Clinical and periodontal parameters -Bleeding on probing (BOP), Periodontal pocket depth (PPD), and Clinical attachment Level (CAL)- and plasma levels of oxidant-antioxidant (TOS- TAOS) levels, glutathione (GSH), and malondialdehyde (MDA) were recorded at baseline and at 3- (T1) and at 6-months (T2) after treatment. RESULTS: Both treatments were efficacious in reducing clinical parameters. However, there were no significant differences regarding oxidative stress parameters in group A compared to group B. CONCLUSIONS: In the present study, gaseous ozone therapy did not enhance the effect of periodontal treatment in reducing oxidative stress in plasma levels of periodontitis patients with type II diabetes. TRIAL REGISTRATION: The study was registered with ISRCTN1728169 (23/07/2022).

Randomized Clinical Trial Comparing Insertion Torque and Implant Stability of Two Different Implant Macrogeometries in the Initial Periods of Osseointegration.

Objectives: The present study compared two implants with different macrogeometries placed in healed alveolar sites, evaluating the insertion torque (ITV) and implant stability quotient (ISQ) values at three different periods. Methods: Seventy patients with a total of 100 dental implants were allocated into two groups (n = 50 per group): DuoCone implants (DC group) that included 28 implants in the maxilla and 22 in the mandible, and Maestro implants (MAE group) that included 26 in the maxilla and 24 in the mandible. The ITV was measured during the implant placement, and the ISQ values were measured immediately at implant placement (baseline) and after 30 and 45 days. Results: The mean and standard deviations of the ITV were statistically significant (p < 0.0001), 56.4 ± 6.41 Ncm for the DC group and 29.3 ± 9.65 Ncm for the MAE group. In the DC group, the ISQs ranged between 61.1 ± 3.78 and 69.8 ± 3.86, while the MAE group presented similar values compared with the other group, ranging between 61.9 ± 3.92 and 72.1 ± 2.37. Conclusions: The value of implant insertion torque did not influence the ISQ values measured immediately after implant placement. However, the ITV influenced the ISQ values measured in the two initial periods of osseointegration, with implants installed with lower torques presenting higher ISQ values.

Evaluation of Behavior of Castable versus Machined Solid Abutments for Morse Tapper Implant Connection: A Clinical Retrospective Study.

Objective: The primary objective of the present retrospective clinical study was to evaluate and compare the clinical performance presented by castable abutments developed for the MT system versus intermediate machined abutments, specifically regarding prosthetic or implant fractures/loss; the secondary objective was to verify the looseness of the abutments and the behavior of the peri-implant soft tissues. Methods: This clinical retrospective study was conducted on patients rehabilitated between 2019 and 2020. Inclusion criteria were patients in good general health, with an implants-supporting single crown; with solid machined abutments (control group) or castable UCLA abutments; with a connection portion (base) machined in cobalt-chrome (test group) over Morse taper DuoCone implants in the posterior mandible area; and at least two years in function. Clinical assessment was carried out by the same professional, considering the following parameters: (A) prosthetic: (i) loosening of the fixation screw, (ii) fracture of the screw and (iii) the number of times the patient had some type of complication after the installation of the prostheses were evaluated; (B) biological: (i) without keratinized mucosa (KM), (ii) 1 mm or less, (iii) between 1 and 2 mm and (iv) greater than 2 mm of KM width; and the presence or absence of mucositis. Furthermore, radiographic evaluation was performed in order to assess the marginal bone loss. These evaluations permitted to compare the groups analyzed and patients enrolled. Data were statistically analyzed, with the level of significance set at α = 0.05. Results: 79 patients with 120 MT implants were evaluated (80 castable UCLA abutments and 40 machined solid abutments). The follow-up was from 2 to 4 years. There was a 100% implant survival rate. Therefore, the control group showed two fractured abutments (5%) and no abutment loosening (95% for prosthetic survival rate), whereas the test group showed no abutment fracture but nine loosening screws (11.3%) (100% for prosthetic survival rate). Keratinized mucosa was considered thin or absent in 19 implants in the control group (47.5%) and 42 in the test group (52.5%). Mucositis was found in 11 implants in the control group (27.5%) and 27 in the test group (33.8%). A positive correlation was observed between the width of keratinized mucosa and mucositis (r = 0.521, p = 0.002). The mean marginal bone loss was 2.3 mm, ranging from 1.1 to 5.8 mm. No correlation was observed when considering marginal bone loss versus the three parameters (implant diameter, implant length and time of the prosthesis in function). Conclusions: The results suggest that UCLA-type abutments are a viable option for rehabilitating implants with Morse taper connections, suggesting lower fracture risk. Further research is necessary to confirm these findings and thoroughly evaluate the clinical performance and long-term outcomes.

Mixed-dust pneumoconiosis in a dental technician: a multidisciplinary diagnosis case report.

BACKGROUND: In dental laboratories, exposure to crystalline silica can occur during procedures that generate suspended mineral dusts, e.g. dispersion of mixing powders, removal of castings from molds grinding, polishing of castings and porcelain, and use of silica sand for blasting. There is also a large list of toxic agents (acrylic resins, polymeric materials, etc.) used to produce removable and fixed prostheses, but also impression materials and more. Using personal protective equipment and other aids reduces the exposure to these potentially harmful agents. CASE PRESENTATION: We report the case of a 42-year-old male dental technician who began to suffer from a dry cough and exertional dyspnea after approximately 15 years of work. The operations he conducted for his job resulted in the generation of crystalline silica, aluminum, chromium and titanium dust. The worker did not regularly wear personal protective equipment and some of the above operations were not carried out in closed circuit systems. The Chest X-ray showed diffused micronodules in the pulmonary interstitium of the upper-middle lobes, bilaterally, and a modest left basal pleural effusion. Simple spirometry showed small airway obstruction in its initial stage. High Resolution Computerized Tomography of the chest showed bilateral micronodulation of a miliariform type, with greater profusion to the upper lobes, also present in the visceral pleura, bilaterally. Histological examination showed aggregates of pigment-laden macrophages forming perivascular macules or arranged in a radial pattern around a core of sclerohyalinosis. Scanning Electron Microscopy and Energy Dispersive Spectrometry revealed several mineral particles, typically characterized by the presence of crystalline silica and metal aggregates. The environmental concentrations of total dust and its respirable fraction were all lower than the relative TLV-TWA-ACGIH, yet not negligible. CONCLUSIONS: The above findings and a multidisciplinary assessment led to the diagnosis of mixed dust pneumoconiosis s/q with 2/2 profusion of occupational origin. This diagnosis in a dental technician was supported for the first time in literature by environmental exposure analysis.

Use of CGF in Oral and Implant Surgery: From Laboratory Evidence to Clinical Evaluation.

Edentulism is the condition of having lost natural teeth, and has serious social, psychological, and emotional consequences. The need for implant services in edentulous patients has dramatically increased during the last decades. In this study, the effects of concentrated growth factor (CGF), an autologous blood-derived biomaterial, in improving the process of osseointegration of dental implants have been evaluated. Here, permeation of dental implants with CGF has been obtained by using a Round up device. These CGF-coated dental implants retained a complex internal structure capable of releasing growth factors (VEGF, TGF-ß1, and BMP-2) and matrix metalloproteinases (MMP-2 and MMP-9) over time. The CGF-permeated implants induced the osteogenic differentiation of human bone marrow stem cells (hBMSC) as confirmed by matrix mineralization and the expression of osteogenic differentiation markers. Moreover, CGF provided dental implants with a biocompatible and biologically active surface that significantly improved adhesion of endothelial cells on CGF-coated implants compared to control implants (without CGF). Finally, data obtained from surgical interventions with CGF-permeated dental implants presented better results in terms of optimal osseointegration and reduced post-surgical complications. These data, taken together, highlight new and interesting perspectives in the use of CGF in the dental implantology field to improve osseointegration and promote the healing process.

Treatment of Class III Malocclusion and Anterior Crossbite with Aligners: A Case Report.

The article describes the orthodontically treated case of a 25-year-old patient with skeletal and dental class III malocclusion, anterior crossbite, which caused functional and aesthetic problems, occlusal trauma, and incisor wear. Treatment with transparent aligners was proposed to meet the patient's needs, using the sequential distalization protocol. While sequential distalization is well documented for class II malocclusion treatment in maxillary arch teeth, further investigations are necessary for class III malocclusions. In fact, lower teeth movements are more complex due to mandibular bone density and the presence of the third molars, which are often extracted to perform distalization. In addition, the use of intermaxillary elastics helps control the proclination of the anterior teeth as a reaction to distalizing forces. At the end of the treatment, the patient reached molar and canine class I and positive overjet and overbite. The inclination of lower incisors and the interincisal angle have improved, resulting in aesthetic and functional enhancement.

Zygomatic implant penetration to the central portion of orbit: a case report.

BACKGROUND: Zygomatic implants have been proposed in literature for atrophic maxillary fixed oral rehabilitations. The aim of the present research was to evaluate, by a clinical and tomography assessment, a surgical complication of a zygomatic implant penetration to the orbit. CASE PRESENTATION: A 56 year-old female patient was visited for pain and swelling in the left orbit after a zygomatic implant protocol. The orbit invasion of the zygomatic implant screw was confirmed by the CBCT scan. The patient was treated for surgical implant removal and the peri- and post-operative symptoms were assessed. No neurological complications were reported at the follow-up. The ocular motility and the visual acuity were well maintained. No purulent secretion or inflammatory evidence were reported in the post-operative healing phases. CONCLUSION: The penetration of the orbit during a zygomatic implant positioning is a surgical complication that could compromise the sight and movements of the eye. In the present case report, a zygomatic implant removal resulted in an uneventful healing phase with recovery of the eye functions.

Photobiomodulation Enhances the Healing of Postextraction Alveolar Sockets: A Randomized Clinical Trial With Histomorphometric Analysis and Immunohistochemistry.

PURPOSE: Wound healing of postextraction sockets is a complex process that permits to reach the bone reformation in about 3 months, and that could be characterized by the presence of some complications, mainly dependent on the duration of the surgery. The aim of this study is to evaluate the impact of photobiomodulation (PBMT) on the healing processes of mucosa overlying postextraction alveolus and on related complications. METHODS: Twenty systemically healthy patients who needed to extract both lower third molars were selected in a private clinic and included in this prospective split-mouth randomized clinical trial. Inclusion criteria were no smokers subjects with the necessity to extract both lower third molars with surgeries overlapping for duration and difficulty. A computer-based randomization procedure was permitted to choose the side, subject to PBMT, by means of a neodymium-doped YAG (Nd: YAG) laser (test) and controls. Both surgeries were performed by the same operator with a gap of 40 days. Twenty-two days after each surgery, a biopsy in correspondence to the alveolar mucosa of the socket was obtained from both sites and observed with an optical microscope and analyzed with histomorphometric analysis and immunohistochemistry. RESULTS: Each of the 20 participants included in this study (11 women and 9 men, nonsmokers, mean age 16 years in the range of 15 to 17 years) were subjected to the extraction of both lower third molars, and a side was treated as control, the other, as the test. The histomorphometric analysis and immunohistochemistry showed that the tested sites, contrary to controls, were characterized by a lower presence of inflammatory cells, a more mature epithelium and myofibroblasts incorporated in a network of fibers parallel to the basal membrane, with little positivity to alpha-SMA antibodies and anti-myosin but positivity to anti-desmin. CONCLUSIONS: In conclusion, PBMT accelerates the healing process of postextraction alveolus after third molar extraction.

Graphene-Doped Poly (Methyl-Methacrylate) (Pmma) Implants: A Micro-CT and Histomorphometrical Study in Rabbits.

Background-the graphene-doping procedure represents a useful procedure to improve the mechanical, physical and biological response of several Polymethyl methacrylate (PMMA)-derived polymers and biomaterials for dental applications. The aim of this study was to evaluate osseointegration of Graphene doped Poly(methyl methacrylate) (GD-PMMA) compared with PMMA as potential materials for dental implant devices. Methods-eighteen adult New Zealand white male rabbits with a mean weight of approx. 3000 g were used in this research. A total of eighteen implants of 3.5 mm diameter and 11 mm length in GD-PMMA and eighteen implants in PMMA were used. The implants were placed into the articular femoral knee joint. The animals were sacrificed after 15, 30 and 60 days and the specimens were evaluated by µCT and histomorphometry. Results-microscopically, all 36 implants, 18 in PMMA and 18 in DG-PMMA were well-integrated into the bone. The implants were in contact with cortical bone along the upper threads, while the lower threads were in contact with either newly formed bone or with marrow spaces. The histomorphometry and µCT evaluation showed that the GP-PMMA and PMMA implants were well osseointegrated and the bone was in direct contact with large portions of the implant surfaces, including the space in the medullary canal. Conclusions-in conclusion, the results suggest that GD-PMMA titanium surfaces enhance osseointegration in rabbit femurs. This encourages further research to obtain GD-PMMA with a greater radiopacity. Also, further in vitro and vivo animal studies are necessary to evaluate a potential clinical usage for dental implant applications.

Collagen Fibres Orientation in the Bone Matrix around Dental Implants: Does the Implant's Thread Design Play a Role?

The aim of this study was to analyse the influence of different thread shapes of titanium dental implant on the bone collagen fibre orientation (BCFO) around loaded implants. Twenty titanium dental implants, divided for thread shapes in six groups (A-F) were analysed in the present study. All implants were immediately loaded and left in function for 6 months before retrieval. The parameters evaluated under scanning electron microscope were the thread width, thread depth, top radius of curvature, flank angle, and the inter-thread straight section. Two undecalcified histological sections were prepared from each implant. Birefringence analysis using circularly polarized light microscopy was used to quantitively measure BCFO. For groups A-F, respectively, transverse BCFO was 32.7%, 24.1%, 22.3%, 18.2%, 32.4%, and 21.2%, longitudinal BCFO was 28.2%, 14.5%, 44.9%, 33.1%, 37.7%, and 40.2%. The percentage differences between transverse and longitudinal orientation were 4.50% (A), 9.60% (B), -22.60% (C), -14.90% (D), -5.30% (E), and -19.00% (F). Following loading, the amount of transverse and longitudinal BCFO were significantly influenced by the thread shape. The greater flank angles and narrower inter-thread sections of the "V" shaped and "concave" shaped implant threads of groups A and B, respectively, promoted the predominance of transverse BCFO, compared to groups C-F (p < 0.05). A narrow inter-thread straight section promotes transverse BCFO, as do "V" shaped and "concave" shaped threads, which can thus be considered desirable design for implant threads.

Cannabinoids Drugs and Oral Health-From Recreational Side-Effects to Medicinal Purposes: A Systematic Review.

BACKGROUND: marijuana, the common name for cannabis sativa preparations, is one of the most consumed drug all over the world, both at therapeutical and recreational levels. With the legalization of medical uses of cannabis in many countries, and even its recreational use in most of these, the prevalence of marijuana use has markedly risen over the last decade. At the same time, there is also a higher prevalence in the health concerns related to cannabis use and abuse. Thus, it is mandatory for oral healthcare operators to know and deal with the consequences and effects of cannabis use on oral cavity health. This review will briefly summarize the components of cannabis and the endocannabinoid system, as well as the cellular and molecular mechanisms of biological cannabis action in human cells and biologic activities on tissues. We will also look into oropharyngeal tissue expression of cannabinoid receptors, together with a putative association of cannabis to several oral diseases. Therefore, this review will elaborate the basic biology and physiology of cannabinoids in human oral tissues with the aim of providing a better comprehension of the effects of its use and abuse on oral health, in order to include cannabinoid usage into dental patient health records as well as good medicinal practice. METHODS: the paper selection was performed by PubMed/Medline and EMBASE electronic databases, and reported according to the PRISMA guidelines. The scientific products were included for qualitative analysis. RESULTS: the paper search screened a total of 276 papers. After the initial screening and the eligibility assessment, a total of 32 articles were considered for the qualitative analysis. CONCLUSIONS: today, cannabis consumption has been correlated to a higher risk of gingival and periodontal disease, oral infection and cancer of the oral cavity, while the physico-chemical activity has not been completely clarified. Further investigations are necessary to evaluate a therapeutic efficacy of this class of drugs for the promising treatment of several different diseases of the salivary glands and oral diseases.

Effectiveness of Dental and Maxillary Transverse Changes in Tooth-Borne, Bone-Borne, and Hybrid Palatal Expansion through Cone-Beam Tomography: A Systematic Review of the Literature.

Background and Objectives: Palatal expansion is a common orthodontic technique able to increase the transverse changes for subjects with constricted maxillary arches. The aim of the present investigation was to evaluate through a systematic review the tomography effectiveness of different palatal expander approaches. Materials and Methods: The database used to perform the screening and determine the eligibility of the clinical papers was PubMed (Medline). Results: The database search included a total of 284 results, while 271 articles were excluded. A total of 14 articles were included for the qualitative assessment. Conclusions: The effectiveness of the present studies reported that skeletal expansion was a useful approach to increase the transverse changes for subjects with constricted maxillary arches.

Genetic Pattern, Orthodontic and Surgical Management of Multiple Supplementary Impacted Teeth in a Rare, Cleidocranial Dysplasia Patient: A Case Report.

Background: Cleidocranial dysplasia (CCD) is a rare, autosomal dominant skeletal dysplasia with a prevalence of one per million births. The main causes of CCD are mutations in the core-binding factor alpha-1 (CBFA1) or runt-related transcription factor-2 (RUNX2), located at the 6p21 chromosomal region. RUNX2 plays important roles in osteoblast differentiation, chondrocyte proliferation and differentiation, and tooth formation. The disease is characterized by clavicular aplasia or hypoplasia, Wormian bones, delayed closure of cranial suture, brachycephalic head, maxillary deficiency, retention of primary teeth, inclusion of permanent teeth, and multiple supernumerary teeth. Materials and Methods: A 22-year-old girl suffering from cleidocranial dysplasia with short stature, narrow shoulders, craniofacial manifestations (short face, broad forehead, etc.) and dental anomalies (different lower dental elements under eruption, supernumerary and impacted multiple teeth, etc.) was examined at our service (Complex Operative Unit of Odontostomatology of Policlinico of Bari). RX Orthopantomography (OPG) and cone beam computed tomography (CBCT) were requested to better assess the position of the supernumerary teeth and their relationships with others and to evaluate the bone tissue. Results: Under eruption was probably caused by dental interferences with supernumerary teeth; hence, extractions of supernumerary upper canines and lower premolars were performed under general anaesthesia. Surgery outcome was excellent with good tissue healing and improvements in the therapeutic possibilities with future orthodontics. Conclusions: The objective of this article is to give an update about radiological, clinical, and molecular features of CCD and to alert the health team about the importance of establishing an early diagnosis and an appropriate treatment in these patients to prevent impacted teeth complications and to offer them a better quality of life.

EFFICACY OF HEMOSTATIC AGENTS IN ENDODONTIC SURGERY: A SYSTEMATIC REVIEW AND NETWORK META-ANALYSIS.

OBJECTIVE: Adequate hemostasis is a critical step in endodontic surgery. It facilitates the procedure and affects the success and prognosis of the operation. This systematic review and network meta-analysis (NMA) aimed to systematically assess the efficacy of hemostatic agents in endodontic surgery and to identify the most effective ones. METHODS: PubMed, Scopus, Embase, Cochrane Library, Web of Science, ProQuest, and EBSCOhost databases were searched up to December 2020. We included randomized controlled trials (RCTs) evaluating the efficacy of different hemostatic measures in endodontic surgery, and their risk of bias was assessed using Cochrane's randomized trial tool (RoB 2.0). Frequentist network meta-analysis was conducted, with Odds Ratios and 95% confidence intervals (OR, 95% CI) as effect estimates using the "netmeta" package in R. The quality of evidence was assessed using the CINeMA approach. RESULTS: Six RCTs involving 353 patients (mean age 48.12 y) were included. NMA revealed that aluminum chloride achieved higher hemostatic efficacy than epinephrine (OR = 2.55, 95% CI [1.41, 4.64]), while there was non-significant difference when compared with PTFE strips + epinephrine (OR = 1.00, 95% CI [0.35, 2.90]), electrocauterization (OR = 2.67, 95% CI [0.84, 8.46]), or ferric sulfate (OR = 8.65, 95% CI [0.31, 240.92]). Of all hemostatic agents, aluminum chloride ranked first in control bleeding during endodontic surgery (P-score = 0.84), followed by PTFE strips + epinephrine (P-score = 0.80), electrocauterization (P-score = 0.34), epinephrine (P-score = 0.34), ferric sulfate (P-score = 0.18). The quality of evidence was very low. CONCLUSIONS: Based on the limited data, aluminum chloride provides better hemostasis than epinephrine, while there was no significant difference between the remaining hemostatic agents used in endodontic surgery, which could help clinicians choose the hemostatic agent that achieves adequate hemostasis. achieve adequate hemostasis. Given insufficient evidence, future RCTs addressing this evidence gap are required.

Synthetic Scaffold/Dental Pulp Stem Cell (DPSC) Tissue Engineering Constructs for Bone Defect Treatment: An Animal Studies Literature Review.

BACKGROUND: Recently a greater interest in tissue engineering for the treatment of large bone defect has been reported. The aim of the present systematic review and meta-analysis was to investigate the effectiveness of dental pulp stem cells and synthetic block complexes for bone defect treatment in preclinical in vivo articles. METHODS: The electronic database and manual search was conducted on Pubmed, Scopus, and EMBASE. The papers identified were submitted for risk-of-bias assessment and classified according to new bone formation, bone graft characteristics, dental pulp stem cells (DPSCs) culture passages and amount of experimental data. The meta-analysis assessment was conducted to assess new bone formation in test sites with DPSCs/synthetic blocks vs. synthetic block alone. RESULTS: The database search identified a total of 348 papers. After the initial screening, 30 studies were included, according to the different animal models: 19 papers on rats, 3 articles on rabbits, 2 manuscripts on sheep and 4 papers on swine. The meta-analysis evaluation showed a significantly increase in new bone formation in favor of DPSCs/synthetic scaffold complexes, if compared to the control at 4 weeks (Mean Diff: 17.09%, 95% CI: 15.16-18.91%, p < 0.01) and at 8 weeks (Mean Diff: 14.86%, 95% CI: 1.82-27.91%, p < 0.01) in rats calvaria bone defects. CONCLUSION: The synthetic scaffolds in association of DPSCs used for the treatment of bone defects showed encouraging results of early new bone formation in preclinical animal studies and could represent a useful resource for regenerative bone augmentation procedures.

The Relationship Between Time of Retightening and Preload Loss of Abutment Screws for Two Different Implant Designs: An In Vitro Study.

The loosening of an abutment screw is one of the most frequent complications in implant-prosthetic rehabilitation, especially for single-crown cemented prostheses. This complication is due to several mechanical factors including type of connection, abutment-screw geometry, settling effects, and cyclical load. The purpose of the present in vitro study was to compare and associate different times of retightening with reductions in preload losses. We evaluated 40 internal hexagon dental implants and 40 external hexagon dental implants, with their related abutment screws. The implants were embedded in acrylic resin in cylindrical polyvinyl chloride tubes (26 mm diameter, 20 mm height). The abutments were fixed to the implants with screws to an initial torque of 35 Ncm using a digital torque meter with decimal precision. Two different types of connection were randomly divided in 4 subgroups of 10 samples each. One subgroup was used as control. The test groups underwent retightening to the same initial torque at increasing times from initial torque application for tightening of the abutment screws, to their retightening at 2 minutes, 5 minutes, and 10 minutes. The retightening time of 2 minutes shows significantly reduced preload loss. Randomized clinical trials are strongly required to provide clinicians with a beneficial standardized protocol of retightening that can be applied in routine clinical practice.