RESUMEN
A comprehensive understanding of the key microenvironmental signals regulating bone regeneration is pivotal for the effective design of bioinspired orthopedic materials. Here, we identified citrate as an osteopromotive factor and revealed its metabonegenic role in mediating citrate metabolism and its downstream effects on the osteogenic differentiation of human mesenchymal stem cells (hMSCs). Our studies show that extracellular citrate uptake through solute carrier family 13, member 5 (SLC13a5) supports osteogenic differentiation via regulation of energy-producing metabolic pathways, leading to elevated cell energy status that fuels the high metabolic demands of hMSC osteodifferentiation. We next identified citrate and phosphoserine (PSer) as a synergistic pair in polymeric design, exhibiting concerted action not only in metabonegenic potential for orthopedic regeneration but also in facile reactivity in a fluorescent system for materials tracking and imaging. We designed a citrate/phosphoserine-based photoluminescent biodegradable polymer (BPLP-PSer), which was fabricated into BPLP-PSer/hydroxyapatite composite microparticulate scaffolds that demonstrated significant improvements in bone regeneration and tissue response in rat femoral-condyle and cranial-defect models. We believe that the present study may inspire the development of new generations of biomimetic biomaterials that better recapitulate the metabolic microenvironments of stem cells to meet the dynamic needs of cellular growth, differentiation, and maturation for use in tissue engineering.
Asunto(s)
Ácido Cítrico/metabolismo , Células Madre Mesenquimatosas/metabolismo , Adenosina Trifosfato/metabolismo , Animales , Materiales Biocompatibles/química , Biopolímeros/química , Regeneración Ósea/fisiología , Adhesión Celular , Diferenciación Celular/fisiología , Proliferación Celular , Modelos Animales de Enfermedad , Fracturas del Fémur/patología , Fracturas del Fémur/terapia , Humanos , Masculino , Células Madre Mesenquimatosas/citología , Redes y Vías Metabólicas , Modelos Biológicos , Osteogénesis/fisiología , Fenotipo , Fosfoserina/metabolismo , Ratas , Ratas Sprague-Dawley , Fracturas Craneales/patología , Fracturas Craneales/terapia , Nicho de Células Madre/fisiología , Simportadores/metabolismo , Ingeniería de Tejidos , Andamios del Tejido/químicaRESUMEN
An increasing number of patients are being diagnosed with neurological diseases, but are rarely cured because of the lack of curative therapeutic approaches. This situation creates an urgent clinical need to develop effective diagnosis and treatment strategies for repair and regeneration of injured or diseased neural tissues. In this regard, biodegradable functional biomaterials provide promising solutions to meet this demand owing to their unique responsiveness to external stimulation fields, which enable neuro-imaging, neuro-sensing, specific targeting, hyperthermia treatment, controlled drug delivery, and nerve regeneration. This review discusses recent progress in the research and development of biodegradable functional biomaterials including electroactive biomaterials, magnetic materials and photoactive biomaterials for the management of neurological disorders with emphasis on their applications in bioimaging (photoacoustic imaging, MRI and fluorescence imaging), biosensing (electrochemical sensing, magnetic sensing and opical sensing), and therapy strategies (drug delivery, hyperthermia treatment, and tissue engineering). It is expected that this review will provide an insightful discussion on the roles of biodegradable functional biomaterials in the diagnosis and treatment of neurological diseases, and lead to innovations for the design and development of the next generation biodegradable functional biomaterials.
Asunto(s)
Materiales Biocompatibles/uso terapéutico , Enfermedades del Sistema Nervioso/tratamiento farmacológico , Fármacos Neuroprotectores/uso terapéutico , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Sistemas de Liberación de Medicamentos , Humanos , Enfermedades del Sistema Nervioso/diagnóstico por imagen , Fármacos Neuroprotectores/química , Fármacos Neuroprotectores/metabolismoRESUMEN
The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, ß-glycerophosphate disodium (ß-GP-Na) and glycerophosphate calcium (GP-Ca), incorporated through a simple and convenient one-pot condensation reaction, which might address the above challenge in the search of suitable orthopedic biomaterials. Tensile strength of the resultant poly (octamethylene citrate glycerophosphate), POC-ßGP-Na and POC-GP-Ca, was as high as 28.2⯱â¯2.44 â¯MPa and 22.76⯱â¯1.06⯠MPa, respectively. The initial modulus ranged from 5.28⯱â¯0.56⯠MPa to 256.44⯱â¯22.88⯠MPa. The mechanical properties and degradation rate of POC-GP could be controlled by varying the type of salts, and the feeding ratio of salts introduced. Particularly, POC-GP-Ca demonstrated better cytocompatibility and the corresponding composite POC-GP-Ca/hydroxyapatite (HA) also elicited improved osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro, as compared to POC-ßGP-Na/HA and POC/HA. The superior in-vivo performance of POC-GP-Ca/HA microparticle scaffolds in promoting bone regeneration over POC-ßGP-Na/HA and POC/HA was further confirmed in a rabbit femoral condyle defect model. Taken together, the tunability of mechanical properties and degradation rates, together with the osteopromotive nature of POC-GP polymers make these materials, especially POC-GP-Ca well suited for bone tissue engineering applications. STATEMENT OF SIGNIFICANCE: The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, ß-glycerophosphate disodium (ß-GPNa) and glycerophosphate calcium (GPCa), incorporated through a simple and convenient one-pot condensation reaction. The resultant POC-GP polymers showed significantly improved mechanical property and tunable degradation rate. Within the formulation investigated, POC-GPCa/HA composite further demonstrated better bioactivity in favoring osteogenic differentiation of hMSCs in vitro and promoted bone regeneration in rabbit femoral condyle defects. The development of POC-GP expands the repertoire of the well-recognized citrate-based biomaterials to meet the ever-increasing needs for functional biomaterials in tissue engineering and other biomedical applications.
Asunto(s)
Materiales Biocompatibles/química , Polímeros/química , Andamios del Tejido/química , Animales , Materiales Biocompatibles/metabolismo , Regeneración Ósea , Huesos/metabolismo , Adhesión Celular , Diferenciación Celular , Citratos/química , Durapatita/química , Glicerofosfatos/química , Prótesis de Cadera , Humanos , Células Madre Mesenquimatosas/metabolismo , Modelos Animales , Osteogénesis , Polímeros/metabolismo , Conejos , Resistencia a la Tracción , Ingeniería de TejidosRESUMEN
Nanoparticles (NPs) can be used to locally deliver anti-restenosis drugs when they are infused directly to the injured arteries after intervention procedures such as angioplasty. However, the efficacy of transferring NPs via infusion to the arterial wall is limited, at least partially, due to poor NP retention on the inner artery wall. To improve NP retention, angioplasty balloons coated with drug-loaded NPs were fabricated via either layer-by-layer (LbL) electrostatic coating or acrylic-based hydrogel (AAH) coating techniques. Three types of NPs, namely poly (lactide-co-glycolide) (PLGA), biodegradable photo-luminescent PLGA and urethane doped polyester were studied. The transfer efficacy of NPs from various coatings to the arterial wall were further evaluated to find the optimal coating conditions. The ex vivo NP transfer studies showed significantly more NPs being transferred to the rat arterial wall after the angioplasty procedure by the AAH coating (95% transfer efficiency) compared to that of the LbL technique (60%) and dip coating (20%) under flow conditions (10â¯dyn/cm2). Our results suggest that the AAH coating of drug-loaded NPs on the angioplasty balloon could potentially provide superior retention of drug-loaded NPs onto the arterial wall for a better local delivery of drug-loaded NPs to effectively treat arterial diseases.
Asunto(s)
Angioplastia Coronaria con Balón/métodos , Reestenosis Coronaria/prevención & control , Sistemas de Liberación de Medicamentos , Nanopartículas , Animales , Arterias/metabolismo , Enfermedades Cardiovasculares/terapia , Sustancias Luminiscentes/química , Poliésteres/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Ratas , Uretano/químicaRESUMEN
Fluorescence imaging has emerged as a promising technique for monitoring and assessing various biologically relevant species in cells and organisms, driving the demand for effective fluorescent agents with good biocompatibility and high fluorescence performance. However, traditional fluorescent agents, such as quantum dots (QDs) and organic dyes, either suffer from toxicity concerns or poor fluorescence performance (e.g., low photobleaching-resistance). In this regard, citrate-based fluorescent biomaterials, which are synthesized from the natural and biocompatible precursor of citric acid (CA), have become competitive alternatives for fluorescence imaging owing to their biocompatibility, cost effectiveness, straightforward synthetic routes, flexible designability, as well as strong fluorescence with adjustable excitation/emission wavelengths. Accordingly, numerous citrate-based biomaterials, including carbon dots (CDs), biodegradable photoluminescent polymers (BPLPs), and small molecular fluorophores, have been developed and researched in the past few decades. This review discusses recent progress in the research and development of citrate-based fluorescent materials with emphasis on their design and synthesis considerations, material properties, fluorescence properties and mechanisms, as well as biomedical applications. It is expected that this review will provide an insightful discussion on the citrate-based fluorescent biomaterials, and lead to innovations for the next generation of fluorescent biomaterials and fluorescence-based biomedical technology.
Asunto(s)
Materiales Biocompatibles/química , Citratos/química , Imagen Óptica/métodos , Polímeros/química , Puntos Cuánticos/químicaRESUMEN
Nanoparticle-based tumor therapies are extensively studied; however, few are capable of improving patient survival time due to premature drug leakage, off target effects, and poor tissue penetration. Previously, we successfully synthesized a novel family of Y1 receptor (Y1R) ligand modified, photoluminescent BPLP nanobubbles and nanoparticles for targeted breast cancer ultrasound imaging; however, increased accumulation could also be observed in the liver, kidney, and spleen, suggesting significant interaction of the particles with macrophages in vivo. Herein, for the first time, we imparted antiphagocytosis capability to Y1R ligand functionalized BPLP-WPU polymeric micelles through the incorporation of a CD47 human glycoprotein based self-peptide. Application of self-peptide modified, DOX loaded micelles in vivo resulted in a 100% survival rate and complete tumor necrosis over 100 days of treatment. In vivo imaging of SPION loaded, self-peptide modified micelles revealed effective targeting to the tumor site while analysis of iron content demonstrated reduced particle accumulation in the liver and kidney, demonstrating reduced macrophage interaction, as well as a 2-fold increase of particles in the tumor. As these results demonstrate, Y1R ligand, self-peptide modified BPLP-WPU micelles are capable of target specific cancer treatment and imaging, making them ideal candidates to improve survival rate and tumor reduction clinically.
Asunto(s)
Luminiscencia , Micelas , Neoplasias/diagnóstico por imagen , Neoplasias/terapia , Fagocitosis , Poliuretanos/química , Receptores de Neuropéptido Y/metabolismo , Animales , Antineoplásicos/farmacocinética , Antineoplásicos/farmacología , Muerte Celular/efectos de los fármacos , Doxorrubicina/farmacología , Liberación de Fármacos , Humanos , Concentración de Iones de Hidrógeno , Ligandos , Células MCF-7 , Imagen por Resonancia Magnética , Nanopartículas de Magnetita/química , Nanopartículas de Magnetita/ultraestructura , Ratones Desnudos , Péptidos/química , Fagocitosis/efectos de los fármacos , Análisis de Supervivencia , Células THP-1 , Factores de TiempoRESUMEN
Implanting fiber optical waveguides into tissue or organs for light delivery and collection is among the most effective ways to overcome the issue of tissue turbidity, a long-standing obstacle for biomedical optical technologies. Here, we report a citrate-based material platform with engineerable opto-mechano-biological properties and demonstrate a new type of biodegradable, biocompatible, and low-loss step-index optical fiber for organ-scale light delivery and collection. By leveraging the rich designability and processibility of citrate-based biodegradable polymers, two exemplary biodegradable elastomers with a fine refractive index difference and yet matched mechanical properties and biodegradation profiles were developed. Furthermore, we developed a two-step fabrication method to fabricate flexible and low-loss (0.4 db/cm) optical fibers, and performed systematic characterizations to study optical, spectroscopic, mechanical, and biodegradable properties. In addition, we demonstrated the proof of concept of image transmission through the citrate-based polymeric optical fibers and conducted in vivo deep tissue light delivery and fluorescence sensing in a Sprague-Dawley (SD) rat, laying the groundwork for realizing future implantable devices for long-term implantation where deep-tissue light delivery, sensing and imaging are desired, such as cell, tissue, and scaffold imaging in regenerative medicine and in vivo optogenetic stimulation.
Asunto(s)
Materiales Biocompatibles/química , Ácido Cítrico/química , Elastómeros/química , Tecnología de Fibra Óptica/instrumentación , Fibras Ópticas , Polímeros/química , Animales , Diseño de Equipo , Ensayo de Materiales , Imagen Óptica/instrumentación , Prótesis e Implantes , Ratas Sprague-Dawley , RefractometríaRESUMEN
Fluorescent biomaterials have attracted significant research efforts in the past decades. Herein, we report a new series of biodegradable, fluorescence imaging-enabled copolymers, biodegradable photoluminescent poly(lactide-co-glycolide) (BPLP-co-PLGA). Photoluminescence characterization shows that BPLP-co-PLGA solutions, films and nanoparticles all exhibit strong, tunable and stable photoluminescence. By adjusting the molar ratios of L-lactide (LA)/glycolide (GA) and (LA+GA)/BPLP, full degradation of BPLP-co-PLGA can be achieved in 8-16 weeks. The fluorescence decay behavior of BPLP-co-PLGA can be used for non-invasive monitoring of material degradation. In vitro cytotoxicity and in vivo foreign body response evaluations demonstrate that BPLP-co-PLGA exhibits similar biocompatibility to poly(lactide-co-glycolide) (PLGA). The imaging-enabled BPLP-co-PLGA was fabricated into porous scaffolds whose degradation can be monitored through non-invasive imaging and nanoparticles that show theranostic potential demonstrated by fluorescent cellular labeling, imaging and sustained 5-fluorouracil delivery. The development of inherently fluorescent PLGA copolymers is expected to impact the use of already widely accepted PLGA polymers for applications where fluorescent properties are highly desired but limited by the conventional use of cytotoxic quantum dots and photobleaching organic dyes. STATEMENT OF SIGNIFICANCE: This manuscript describes a novel strategy of conferring intrinsic photoluminescence to the widely used biodegradable polymers, poly(lactide-co-glycolide) without introducing any cytotoxic quantum dots or photo-bleaching organic dyes, which may greatly expand the applications of these polymers in where fluorescent properties are highly desired. Given the already significant impact generated by the use of PLGA and alike, this work contributes to fluorescence chemistry and new functional biomaterial design and will potentially generate significant impact on many fields of applications such as tissue engineering, molecular imaging and labeling, and drug delivery.
Asunto(s)
Colorantes Fluorescentes , Ensayo de Materiales , Imagen Óptica/métodos , Poliglactina 910 , Animales , Femenino , Colorantes Fluorescentes/química , Colorantes Fluorescentes/farmacocinética , Colorantes Fluorescentes/farmacología , Humanos , Poliglactina 910/química , Poliglactina 910/farmacocinética , Poliglactina 910/farmacología , Ratas , Ratas Sprague-DawleyRESUMEN
Bacterial and fungal infections in the use of surgical devices and medical implants remain a major concern. Traditional bioadhesives fail to incorporate anti-microbial properties, necessitating additional anti-microbial drug injection. Herein, by the introduction of the clinically used and inexpensive anti-fungal agent, 10-undecylenic acid (UA), into our recently developed injectable citrate-based mussel-inspired bioadhesives (iCMBAs), a new family of anti-bacterial and anti-fungal iCMBAs (AbAf iCs) was developed. AbAf iCs not only showed strong wet tissue adhesion strength, but also exhibited excellent in vitro cyto-compatibility, fast degradation, and strong initial and considerable long-term anti-bacterial and anti-fungal ability. For the first time, the biocompatibility and anti-microbial ability of sodium metaperiodate (PI), an oxidant used as a cross-linking initiator in the AbAf iCs system, was also thoroughly investigated. Our results suggest that the PI-based bioadhesives showed better anti-microbial properties compared to the unstable silver-based bioadhesive materials. In conclusion, AbAf iCs family can serve as excellent anti-bacterial and anti-fungal bioadhesive candidates for tissue/wound closure, wound dressing, and bone regeneration, especially when bacterial or fungal infections are a major concern.
Asunto(s)
Antibacterianos/síntesis química , Antifúngicos/síntesis química , Bivalvos/química , Ácido Cítrico/química , Adhesivos Tisulares/química , Animales , Antibacterianos/farmacología , Antifúngicos/farmacología , Materiales Biocompatibles/química , Candida albicans/efectos de los fármacos , Adhesión Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Células Cultivadas , Escherichia coli/efectos de los fármacos , Humanos , Hidrogeles , Espectroscopía de Resonancia Magnética , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/metabolismo , Nanopartículas del Metal/química , Pruebas de Sensibilidad Microbiana , Plata/química , Espectroscopía Infrarroja por Transformada de Fourier , Staphylococcus aureus/efectos de los fármacos , Adhesivos Tisulares/farmacologíaRESUMEN
Proliferation and differentiation of bone-related cells are modulated by many factors such as scaffold design, growth factor, dynamic culture system, and physical simulation. Nanofibrous structure and moderate-intensity (1 mT-1 T) static magnetic field (SMF) have been identified as capable of stimulating proliferation and differentiation of osteoblasts. Herein, magnetic nanofibers were prepared by electrospinning mixture solutions of poly(L-lactide) (PLLA) and ferromagnetic Fe3O4 nanoparticles (NPs). The PLLA/Fe3O4 composite nanofibers demonstrated homogeneous dispersion of Fe3O4 NPs, and their magnetism depended on the contents of Fe3O4 NPs. SMF of 100 mT was applied in the culture of MC3T3-E1 osteoblasts on pure PLLA and PLLA/Fe3O4 composite nanofibers for the purpose of studying the effect of SMF on osteogenic differentiation of osteoblastic cells on magnetic nanofibrous scaffolds. On non-magnetic PLLA nanofibers, the application of external SMF could enhance the proliferation and osteogenic differentiation of MC3T3-E1 cells. In comparison with pure PLLA nanofibers, the incorporation of Fe3O4 NPs could also promote the proliferation and osteogenic differentiation of MC3T3-E1 cells in the absence or presence of external SMF. The marriage of magnetic nanofibers and external SMF was found most effective in accelerating every aspect of biological behaviors of MC3T3-E1 osteoblasts. The findings demonstrated that the magnetic feature of substrate and microenvironment were applicable ways in regulating osteogenesis in bone tissue engineering.
Asunto(s)
Diferenciación Celular/efectos de los fármacos , Compuestos Férricos/química , Nanofibras/química , Osteoblastos/efectos de los fármacos , Osteogénesis/efectos de los fármacos , Poliésteres/química , Células 3T3 , Animales , Materiales Biocompatibles/química , Línea Celular , Campos Magnéticos , Ratones , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
Biodegradable polyesters and polyphosphazenes are both promising biomaterials for tissue regeneration. A combination of both materials would provide additional advantages over the individual components in aspects of biocompatibility and osteocompatibility. Applications of polyester/polyphosphazene composites, however, were limited due to the severe phase separation. In this study, cross-linkable poly(glycine ethyl ester-co-hydroxyethyl methacrylate)phosphazene (PGHP) was synthesized. It was blended with poly(L-lactide) (PLLA) or poly(L-lactide-co-glycolide) (PLGA), using chloroform as a mutual solvent, and photo-crosslinked before solvent removal. The resulting PLLA (or PLGA)/PGHP composites demonstrated no significant phase separation due to the restricting function of the crosslinked PGHP polymeric network. In comparison with uncrosslinked blends, the mechanical properties of crosslinked composites were remarkably improved, which indicated their strong potential in bone regeneration applications.
Asunto(s)
Materiales Biocompatibles/química , Glicina/análogos & derivados , Metacrilatos/química , Compuestos Organofosforados/química , Poliésteres/química , Polímeros/química , Sustitutos de Huesos/química , Cloroformo/química , Reactivos de Enlaces Cruzados/química , Glicina/química , Ácido Láctico/química , Espectroscopía de Resonancia Magnética , Ensayo de Materiales , Fosfatos/química , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Regeneración , Solventes/química , Espectroscopía Infrarroja por Transformada de Fourier , TemperaturaRESUMEN
Biodegradable polyphosphazenes were categorized as osteoinductive materials because of their phosphorus-containing feature; however, they were less supportive in cell attachment and proliferation at earlier points in comparison with biodegradable aliphatic polyesters. Therefore, mussel-inspired surface modification of poly(alanine ethyl ester-co-glycine ethyl ester)phosphazene (PAGP) was studied, intending to circumvent the above-mentioned disadvantage of polyphosphazene. To this end, PAGP and poly(L-lactide) (PLLA) were electrospun into nanofibrous substrates and surface treated with dopamine aqueous solution. With the analysis of scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscope, and Fourier transform infrared spectroscope, the successful poly(dopamine) coating was identified on both PAGP and PLLA nanofibers. MC3T3-E1 osteoblasts were found attaching and proliferating much well on poly(dopamine)-modified nanofibrous substrates in comparison with the pristine ones. In addition, the poly(dopamine) coating demonstrated high activity in promoting osteogenous differentiation. Because the phosphorus content on nanofiber surface was decreased with the poly(dopamine) coating, the poly(dopamine)-coated PAGP nanofibrous substrate was slightly inferior to pure PAGP nanofibrous substrate in osteogenous differentiation. In a summary, the results confirmed that poly(dopamine)-modified polyphosphazenes were promising scaffold materials with both high cell affinity and high osteocompatibility for bone regeneration.
Asunto(s)
Regeneración Ósea , Diferenciación Celular , Materiales Biocompatibles Revestidos/química , Indoles/química , Nanofibras/química , Compuestos Organofosforados/química , Polímeros/química , Animales , Línea Celular , Ácido Láctico/química , Ratones , Osteogénesis , PoliésteresRESUMEN
Magnetic poly(L-lactide) (PLLA)/Fe3O4 composite nanofibers were prepared with the purpose to develop a substrate for bone regeneration. To increase the dispersibility of Fe3O4 nanoparticles (NPs) in the PLLA matrix, a modified chemical co-precipitation method was applied to synthesize Fe3O4 NPs in the presence of PLLA. Trifluoroethanol (TFE) was used as the co-solvent for all the reagents, including Fe(II) and Fe(III) salts, sodium hydroxide, and PLLA. The co-precipitated Fe3O4 NPs were surface-coated with PLLA and demonstrated good dispersibility in a PLLA/TFE solution. The composite nanofiber electrospun from the solution displayed a homogeneous distribution of Fe3O4 NPs along the fibers using various contents of Fe3O4 NPs. X-ray diffractometer (XRD) and vibration sample magnetization (VSM) analysis confirmed that the co-precipitation process had minor adverse effects on the crystal structure and saturation magnetization (Ms) of Fe3O4 NPs. The resulting PLLA/Fe3O4 composite nanofibers showed paramagnetic properties with Ms directly related to the Fe3O4 NP concentration. The cytotoxicity of the magnetic composite nanofibers was determined using in vitro culture of osteoblasts (MC3T3-E1) in extracts and co-culture on nanofibrous matrixes. The PLLA/Fe3O4 composite nanofibers did not show significant cytotoxicity in comparison with pure PLLA nanofibers. On the contrary, they demonstrated enhanced effects on cell attachment and proliferation with Fe3O4 NP incorporation. The results suggested that this modified chemical co-precipitation method might be a universal way to produce magnetic biodegradable polyester substrates containing well-dispersed Fe3O4 NPs. This new strategy opens an opportunity to fabricate various kinds of magnetic polymeric substrates for bone tissue regeneration.