RESUMEN
Inorganic materials have essential roles in society, including in building construction, optical devices, mechanical engineering and as biomaterials1-4. However, the manufacture of inorganic materials is limited by classical crystallization5, which often produces powders rather than monoliths with continuous structures. Several precursors that enable non-classical crystallization-such as pre-nucleation clusters6-8, dense liquid droplets9,10, polymer-induced liquid precursor phases11-13 and nanoparticles14-have been proposed to improve the construction of inorganic materials, but the large-scale application of these precursors in monolith preparations is limited by availability and by practical considerations. Inspired by the processability of polymeric materials that can be manufactured by crosslinking monomers or oligomers15, here we demonstrate the construction of continuously structured inorganic materials by crosslinking ionic oligomers. Using calcium carbonate as a model, we obtain a large quantity of its oligomers (CaCO3)n with controllable molecular weights, in which triethylamine acts as a capping agent to stabilize the oligomers. The removal of triethylamine initiates crosslinking of the (CaCO3)n oligomers, and thus the rapid construction of pure monolithic calcium carbonate and even single crystals with a continuous internal structure. The fluid-like behaviour of the oligomer precursor enables it to be readily processed or moulded into shapes, even for materials with structural complexity and variable morphologies. The material construction strategy that we introduce here arises from a fusion of classic inorganic and polymer chemistry, and uses the same cross-linking process for the manufacture the materials.
Asunto(s)
Carbonato de Calcio/química , Química Inorgánica , Ciencia de los Materiales/métodos , Polímeros/químicaRESUMEN
Calcium carbonate (CaCO3), possessing excellent biocompatibility, bioactivity, osteoconductivity and superior biodegradability, may serve as an alternative to hydroxyapatite (HAp), the natural inorganic component of bone and dentin. Intrafibrillar mineralization of collagen with CaCO3 was achieved through the polymer-induced liquid precursor (PILP) process for at least 2 days. This study aims to propose a novel pathway for rapid intrafibrillar mineralization with CaCO3 by sequential application of the carbonate-bicarbonate buffer and polyaspartic acid (pAsp)-Ca suspension. Fourier transform infrared (FTIR) spectroscopy, zeta potential measurements, atomic force microscopy/Kelvin probe force microscopy (AFM/KPFM), and three-dimensional stochastic optical reconstruction microscopy (3D STORM) demonstrated that the carbonate-bicarbonate buffer significantly decreased the surface potential of collagen and CO32-/HCO3- ions could attach to collagen fibrils via hydrogen bonds. The electropositive pAsp-Ca complexes and free Ca2+ ions are attracted to and interact with CO32-/HCO3- ions through electrostatic attractions to form amorphous calcium carbonate that crystallizes gradually. Moreover, like CaCO3, strontium carbonate (SrCO3) can deposit inside the collagen fibrils through this pathway. The CaCO3-mineralized collagen gels exhibited better biocompatibility and cell proliferation ability than SrCO3. This study provides a feasible strategy for rapid collagen mineralization with CaCO3 and SrCO3, as well as elucidating the tissue engineering of CaCO3-based biomineralized materials.
RESUMEN
Despite significant efforts utilizing advanced technologies, the contentious debate surrounding the intricate mechanism underlying collagen fibril mineralization, particularly with regard to amorphous precursor infiltration and phase transformation, persists. This work proposes an amorphous calcium phosphate (ACP)-mediated pathway for collagen fibril mineralization and utilizing stochastic optical reconstruction microscopy technology, and has experimentally confirmed for the first time that the ACP nanoparticles can infiltrate inside collagen fibrils. Subsequently, the ACP-mediated phase transformation occurs within collagen fibrils to form HAP crystallites, and significantly enhances the mechanical properties of the mineralized collagen fibrils compared to those achieved by the calcium phosphate ion (CPI)-mediated mineralization and resembles the natural counterpart. Furthermore, demineralized dentin can be effectively remineralized through ACP-mediated mineralization, leading to complete restoration of its mechanical properties. This work provides a new paradigm of collagen mineralization via particle-mediated phase transformation, deepens the understanding of the mechanism behind the mineralization of collagen fibrils, and offers a new strategy for hard tissue repair.
Asunto(s)
Colágeno , Matriz Extracelular , Colágeno/metabolismo , Matriz Extracelular/metabolismo , Fosfatos de CalcioRESUMEN
Amphiphilic biomolecules are abundant in mineralization front of biological hard tissues, which play a vital role in osteogenesis and dental hard tissue formation. Amphiphilic biomolecules function as biosurfactants, however, their biosurfactant role in biomineralization process has never been investigated. This study, for the first time, demonstrates that aggregated amorphous calcium phosphate (ACP) nanoparticles can be reversed into dispersed ultrasmall prenucleation clusters (PNCs) via breakdown and dispersion of the ACP nanoparticles by a surfactant. The reduced surface energy of ACP@TPGS and the electrostatic interaction between calcium ions and the pair electrons on oxygen atoms of C-O-C of D-α-tocopheryl polyethylene glycol succinate (TPGS) provide driving force for breakdown and dispersion of ACP nanoparticles into ultrasmall PNCs which promote in vitro and in vivo biomimetic mineralization. The ACP@TPGS possesses excellent biocompatibility without any irritations to oral mucosa and dental pulp. This study not only introduces surfactant into biomimetic mineralization field, but also excites attention to the neglected biosurfactant role during biomineralization process.
Asunto(s)
Nanopartículas , Tensoactivos , Biomineralización , Biomimética , Fosfatos de Calcio/química , Polietilenglicoles , Nanopartículas/químicaRESUMEN
The hierarchical assembly of nanoapatite within a type I collagen matrix was achieved through biomimetic mineralization in vitro, cooperatively regulated by non-collagenous proteins and small biomolecules. Here, we demonstrated that IP6 could significantly promote intrafibrillar mineralization in two- and three-dimensional collagen models through binding to collagen fibrils via hydrogen bonds (the interaction energy â¼10.21 kJ mol-1), as confirmed by the FTIR spectra and isothermal experimental results. In addition, we find that IP6 associated with dental collagen fibrils can also enhance the remineralization of calcium-depleted dentin and restore its mechanical properties similar to the natural dentin within 4 days. The promoting effect is mainly due to the chemical modification of IP6, which alters the interfacial physicochemical properties of collagen fibrils, strengthening the interaction of calcium phosphate minerals and mineral ions with collagen fibrils. This strategy of interfacial regulation to accelerate the mineralization of collagen fibrils is essential for dental repair and the development of a clinical product for the remineralization of hard tissue.
Asunto(s)
Dentina , Dentina/química , Dentina/metabolismo , Humanos , Remineralización Dental , Colágeno/química , Colágeno/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier , Fosfatos de Calcio/química , Enlace de Hidrógeno , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , AnimalesRESUMEN
Correction for 'Phosphorylation of collagen fibrils enhances intrafibrillar mineralization and dentin remineralization' by Bo Zheng et al., Nanoscale, 2024, https://doi.org/10.1039/d4nr00652f.
RESUMEN
The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.
Asunto(s)
Fosfatos de Calcio , Colágeno Tipo I , Polivinilos , Fosfatos de Calcio/química , Polivinilos/química , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , Polifosfatos/química , Animales , Resinas Acrílicas/química , Dentina/química , Dentina/metabolismo , Fosforilación , Humanos , Compuestos de Vinilo , OrganofosfonatosRESUMEN
This study aimed to evaluate and compare the remineralisation, mechanical, anti-aging, acid resistance and antibacterial properties of calcium phosphate ion clusters (CPICs) materials with those of Duraphat and Icon. The remineralisation and mechanical properties were investigated using scanning electron microscopy, Fourier-transform infrared (FTIR) spectroscopy and nanoindentation. CPICs induced epitaxial crystal growth on the enamel surface, where the regrown enamel-like apatite layers had a similar hardness and elastic modulus to natural enamel (p > 0.05). Acid resistance and anti-aging properties were tested based on ion dissolution and surface roughness. CPICs exhibited similar calcium and phosphate ion dissolution to the control (p > 0.05), and its roughness decreased after thermocycling (p < 0.05), thereby decreasing the risk of enamel surface demineralisation. The minimum inhibitory concentration was 0.1 mg/ml, and the minimum bactericidal concentration ranged from 0.05 to 0.1 mg/ml. Overall, this biomimetic CPICs is a promising alternative to dental demineralisation.
Asunto(s)
Fluoruros , Desmineralización Dental , Humanos , Fluoruros/análisis , Fluoruros/farmacología , Desmineralización Dental/prevención & control , Esmalte Dental/química , Fosfatos de Calcio/farmacología , Fosfatos de Calcio/análisis , Fosfatos/análisis , Fosfatos/farmacología , DurezaRESUMEN
Non-collagenous proteins (NCPs) in the extracellular matrix (ECM) of bone and dentin are known to play a critical regulatory role in the induction of collagen fibril mineralization and are embedded in hyaluronic acid (HA), which acts as a water-retaining glycosaminoglycan and provides necessary biochemical and biomechanical cues. Our previous study demonstrated that HA could regulate the mineralization degree and mechanical properties of collagen fibrils, yet its kinetics dynamic mechanism on mineralization is under debate. Here, we further investigated the role of HA on collagen fibril mineralization and the possible mechanism. The HA modification can significantly promote intrafibrillar collagen mineralization by reducing the electronegativity of the collagen surface to enhance calcium ions (Ca2+) binding capacity to create a local higher supersaturation. In addition, the HA also provides additional nucleation sites and shortens the induction time of amorphous calcium phosphate (ACP)-mediated hydroxyapatite (HAP) crystallization, which benefits mineralization. The acceleration effect of HA on intrafibrillar collagen mineralization is also confirmed in collagen hydrogel and in vitro dentin remineralization. These findings offer a physicochemical view of the regulation effect of carbohydrate polymers in the body on biomineralization, the fine prospect for an ideal biomaterial to repair collagen-mineralized tissues.
RESUMEN
It is currently known that crosslinking agents can effectively improve the mechanical properties of dentin by crosslinking type I collagen. However, few scholars have focused on the influence of crosslinking agents on the collagen-mineral interface after crosslinking. Analysis of the Fourier transform infrared spectroscopy (FTIR) results showed that hydrogen bonding occurs between the tannic acid (TA) molecule and the collagen. The crosslinking degree of TA to collagen reached a maximum 41.28 ± 1.52. This study used TA crosslinked collagen fibers to successfully induce dentin biomineralization, and the complete remineralization was achieved within 4 days. The crosslinking effect of TA can improve the mechanical properties and anti-enzyme properties of dentin. The elastic modulus (mean and standard deviation) and hardness values of the remineralized dentin pretreated with TA reached 19.1 ± 1.12 GPa and 0.68 ± 0.06 GPa, respectively, which were close to those of healthy dentin measurements, but significantly higher than those of dentin without crosslinking (8.91 ± 1.82 GPa and 0.16 ± 0.01 GPa). The interface energy between the surface of collagen fibers and minerals decreased from 10.59 mJ m-2 to 4.19 mJ m-2 with the influence of TA. The current work reveals the importance of tannic acid crosslinking for dentin remineralization while providing profound insights into the interfacial control of biomolecules in collagen mineralization.
RESUMEN
Biomineralization of collagen fibers is regulated by non-collagenous proteins and small biomolecules, which are essential in bone and teeth formation. In particular, small biomolecules such as succinic acid (SA) exist at a high level in hard tissues, but their role is yet unclear. Here, our work demonstrated that SA could significantly promote intrafibrillar mineralization in two- and three-dimensional collagen models, where the relative mineralization rate was 16 times faster than the control group. Furthermore, the FTIR spectra and isothermal experimental results showed that collagen molecules could interact with SA via a hydrogen bond and that the interaction energy was about 4.35 kJ mol-1. As expected, the SA-pretreated demineralized dentin obtained full remineralization within two days, whereas it took more than four days in the control group, and their mechanical properties were considerably enhanced compared with those of the demineralized one. The possible mechanism of the promotion effect of SA was ultimately illustrated, with SA modification strengthening the capacity of the collagen matrix to attract more calcium ions, which might create a higher local concentration that could accelerate the mineralization of collagen fibers. These findings not only advance the understanding of the vital role of small biomolecules in collagen biomineralization but also facilitate the development of an effective strategy to repair hard tissues.
Asunto(s)
Dentina , Succinatos , Biomineralización , Huesos/metabolismo , Colágeno/química , Succinatos/análisis , Succinatos/metabolismoRESUMEN
Dentinal tubule (DT) occlusion by desensitizing agents has been widely applied to inhibit the transmission of external stimuli that cause dentin hypersensitivity (DH). However, most desensitizing agents merely accomplish porous blocking or the formation of a superficial tubular occlusion layer, resulting in a lack of mechanical and acid resistance and long-term stability. Herein, combining biomimetic mineralization and mineral overgrowth of the dentinal matrix was shown to effectively occlude DTs, resulting in the formation of a compact and deep occluding mineral layer that is strongly bound to the organic matrix on tubule walls. This DT occlusion method could achieve both mechanical resistance and acid resistance, demonstrating the potential of an inexpensive, long-term, and efficient therapy for treating DH.
Asunto(s)
Biomimética , Dentina , Microscopía Electrónica de Rastreo , MineralesRESUMEN
Type I collagen and non-collagen proteins are the main organic components of dentin. This study aimed to investigate the biomimetic remineralization of demineralized dentin by aspartic acid (Asp), which is abundant in non-collagenous proteins (NCPs). Asp was added to a mineralizing solution containing polyacrylic acid (PAA) to explore the mechanism of Asp regulating the pure amorphous calcium phosphate (ACP) phase transition process. The remineralization process and superstructure of the remineralized layer of demineralized dentin were evaluated and analyzed by transmission electron microscope (TEM) and scanning electron microscope (SEM), and the biological stability of the remineralized layer was investigated by collagenase degradation experiment. It demonstrated that Asp promoted the crystallization kinetics of PAA-stabilized amorphous calcium phosphate to hydroxyapatite (HAP), and shortened the remineralization time of demineralized dentin from 7 days to 2 days. The newly formed remineralized dentin had similar morphology and biological stability to the natural dentin layer. The presence of a large number of Asp residues in NCPs promoted the phase transformation of ACP, and further revealed the mechanism of action of NCPs in dentin biomineralization. This experiment also showed that Asp promoted the biomimetic remineralization of dentin; the morphology and hierarchical structure of remineralized layer was similar to that of natural teeth, and had good biological properties.
Asunto(s)
Ácido Aspártico , Dentina , Fosfatos de Calcio , Cristalización , CinéticaRESUMEN
Chondroitin sulfate (CS) is widespread in mineralized tissues and is considered to play crucial roles during the mineralization process. However, its role in biomineralization remains controversial. In the present study, CS is immobilized to collagen fibrils to mimic its state in biomineralization. The results demonstrate that immobilized CS on collagen fibrils accelerates calcium phosphate nucleation and significantly promotes collagen mineralization by accumulating calcium ions in collagen fibrils. The stochastic optical reconstruction microscopy results confirm that CS gives the specific nucleation sites for calcium phosphate to preferentially form, the improved intrafibrillar heterogeneous nucleation of calcium phosphate facilitates intrafibrillar mineralization. It is found remarkably accelerated remineralization of CS immobilized demineralized dentin is achieved. This study offers insight on the understanding of the function of the biomacromolecule CS on the biomineralization front. In addition, CS effectively promotes intrafibrillar mineralization, which highlights fine prospect for CS to reconstruct collagen-mineralized tissues as a natural material.
Asunto(s)
Sulfatos de Condroitina/química , Colágeno/química , Fosfatos de Calcio/química , Fosfatos de Calcio/metabolismo , Colágeno/metabolismo , Dentina/química , Dentina/metabolismo , Módulo de Elasticidad , Dureza , Hidrogeles/químicaRESUMEN
Biomineralization has intrigued researchers for decades. Although mineralization of type I collagen has been universally investigated, this process remains a great challenge due to the lack of mechanistic understanding of the roles of biomolecules. In our study, dentine was successfully repaired using the biomolecule polydopamine (PDA), and the remineralized dentine exhibited mechanical properties comparable to those of natural dentine. Detailed analyses of the collagen mineralization process facilitated by PDA showed that PDA can promote intrafibrillar mineralization with a decreased heterogeneous nucleation barrier for hydroxyapatite (HAP) by reducing the interfacial energy between collagen fibrils and amorphous calcium phosphate (ACP), resulting in the conversion of an increasing amount of nanoprecursors into collagen fibrils. The present work highlights the importance of interfacial control in dentine remineralization and provides profound insight into the regulatory effect of biomolecules in collagen mineralization as well as the clinical application of dentine restoration.
Asunto(s)
Dentina , Polímeros , Colágeno , Indoles/uso terapéuticoRESUMEN
The process of biomineralization in dentin and bone tissue repair has been extensively studied. In vitro, biomineralization can be stimulated via a polymer-induced liquid precursor (PILP) process. Guided bone regeneration using a barrier membrane and bone substitute materials is widely used in implantology in cases where there is insufficient bone volume. Herein, we applied a homologous PILP processes to fabricate collagen films with a varying degree of mineralization and tested their performance. The results showed that the prepared biomineralized membranes are biocompatible, have a high stress strength and can promote MC3T3-e1 cell proliferation. This indicated that the membranes can be potentially applied in guided bone regeneration, with membranes containing a higher degree of mineralization achieving the best results.
Asunto(s)
Regeneración Ósea/efectos de los fármacos , Colágeno/farmacología , Células 3T3 , Animales , Materiales Biocompatibles/farmacología , Biomimética/métodos , Sustitutos de Huesos/farmacología , Línea Celular , Proliferación Celular/efectos de los fármacos , Membranas Artificiales , Ratones , Polímeros/farmacología , Ingeniería de Tejidos/métodos , Andamios del TejidoRESUMEN
The bone and dentin mainly consist of type-I collagen fibrils mineralized by hydroxyapatite (HAP) nanocrystals. In vitro biomimetic models based on self-assembled collagen fibrils have been widely used in studying the mineralization mechanism of type-I collagen. In this chapter, the protocol we used to build a biomimetic model for the mechanistic study of type-I collagen mineralization is described. Type-I collagen extracted from rat tail tendon or horse tendon is self-assembled into fibrils and mineralized by HAP in vitro. The mineralization process is monitored by cryoTEM in combination with two-dimensional (2D) and three-dimensional (3D) stochastic optical reconstruction microscopy (STORM), which enables in situ and high-resolution visualization of the process.
Asunto(s)
Biomimética/métodos , Calcificación Fisiológica , Colágeno Tipo I/química , Durapatita/química , Matriz Extracelular/química , Tendones/química , Animales , Caballos , Microscopía Electrónica de Transmisión , Nanopartículas/química , RatasRESUMEN
Dentin hypersensitivity is attributable to the exposed dentin and its patent tubules. We proposed the therapeutic management of demineralized dentin surfaces using a mineralizing adhesive to seal and remineralize dentin, dentinal tubules, and odontoblast processes. An experimental self-etch adhesive and a mineralizing adhesive consisting of the self-etch adhesive and 20 wt % poly-aspartic acid-stabilized amorphous calcium phosphate (PAsp-ACP) nanoparticles were prepared and characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy. After 60 acid-etched midcoronal dentin disks were treated with distilled water (control), a desensitizing agent (Gluma), the experimental self-etch adhesive, and the mineralizing adhesive, dentin permeability was measured and mineralization was evaluated by Raman, FTIR, XRD, TEM, and selected-area electron diffraction, irrespective of abrasive and acidic challenges. In vitro cytotoxicity of the adhesive and the mineralizing adhesive was assessed by Cell Counting Kit-8. The mineralizing adhesive possessed excellent biocompatibility. We proposed a hybrid mineralization layer composed of the light-cured mineralizing adhesive and the mineralized dentin surfaces, as well as interiorly mineralized resin tags and odontoblast processes inside of the dentinal tubules. This hybrid mineralization not only reduced dentin permeability but also resisted abrasive and acidic attacks.
RESUMEN
The regeneration of tooth enamel, the hardest biological tissue, remains a considerable challenge because its complicated and well-aligned apatite structure has not been duplicated artificially. We herein reveal that a rationally designed material composed of calcium phosphate ion clusters can be used to produce a precursor layer to induce the epitaxial crystal growth of enamel apatite, which mimics the biomineralization crystalline-amorphous frontier of hard tissue development in nature. After repair, the damaged enamel can be recovered completely because its hierarchical structure and mechanical properties are identical to those of natural enamel. The suggested phase transformation-based epitaxial growth follows a promising strategy for enamel regeneration and, more generally, for biomimetic reproduction of materials with complicated structure.
Asunto(s)
Apatitas/química , Materiales Biomiméticos/química , Esmalte Dental/química , Animales , Cristalización , HumanosRESUMEN
Biological hard tissues such as bones always contain extremely high levels of citrate, which is believed to play an important role in bone formation as well as in osteoporosis treatments. However, its mechanism on biomineralization is not elucidated. Here, it is found that the adsorbed citrate molecules on collagen fibrils can significantly reduce the interfacial energy between the biological matrix and the amorphous calcium phosphate precursor to enhance their wetting effect at the early biomineralization stage, sequentially facilitating the intrafibrillar formation of hydroxyapatite to produce an inorganic-organic composite. It is demonstrated experimentally that only collagen fibrils containing ≈8.2 wt% of bound citrate (close to the level in biological bone) can reach the full mineralization as those in natural bones. The effect of citrate on the promotion of the collagen mineralization degree is also confirmed by in vitro dentin repair. This finding demonstrates the importance of interfacial controls in biomineralization and more generally, provides a physicochemical view about the regulation effect of small biomolecules on the biomineralization front.