Electrospun Nanofiber Scaffold for Skin Tissue Engineering: A Review.

Skin tissue engineering (STE) is widely regarded as an effective approach for skin regeneration. Several synthetic biomaterials utilized for STE have demonstrated favorable fibrillar characteristics, facilitating the regeneration of skin tissue at the site of injury, yet they have exhibited a lack of in situ degradation. Various types of skin regenerative materials, such as hydrogels, nanofiber scaffolds, and 3D-printing composite scaffolds, have recently emerged for use in STE. Electrospun nanofiber scaffolds possess distinct advantages, such as their wide availability, similarity to natural structures, and notable tissue regenerative capabilities, which have garnered the attention of researchers. Hence, electrospun nanofiber scaffolds may serve as innovative biological materials possessing the necessary characteristics and potential for use in tissue engineering. Recent research has demonstrated the potential of electrospun nanofiber scaffolds to facilitate regeneration of skin tissues. Nevertheless, there is a need to enhance the rapid degradation and limited mechanical properties of electrospun nanofiber scaffolds in order to strengthen their effectiveness in soft tissue engineering applications in clinical settings. This Review centers on advanced research into electrospun nanofiber scaffolds, encompassing preparation methods, materials, fundamental research, and preclinical applications in the field of science, technology, and engineering. The existing challenges and prospects of electrospun nanofiber scaffolds in STE are also addressed.

Magnetic-field-assisted assembly of layered double hydroxide/metal porphyrin ultrathin films and their application for glucose sensors.

The ordered ultrathin films (UTFs) based on CoFe-LDH (layered double hydroxide) nanoplatelets and manganese porphyrin (Mn-TPPS) have been fabricated on ITO substrates via a magnetic-field-assisted (MFA) layer-by-layer (LBL) method and were demonstrated as an electrochemical sensor for glucose. The XRD pattern for the film indicates a long-range stacking order in the normal direction of the substrate. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images of the MFA LDH/Mn-TPPS UTFs reveal a continuous and uniform surface morphology. Cyclic voltammetry, impedance spectroscopy, and chronoamperometry were used to evaluate the electrochemical performance of the film, and the results show that the MFA-0.5 (0.5 T magnetic field) CoFe-LDH/Mn-TPPS-modified electrode displays the strongest redox current peaks and fastest electron transfer process compared with those of MFA-0 (without magnetic-field) and MFA-0.15 (0.15 T magnetic field). Furthermore, the MFA-0.5 CoFe-LDH/Mn-TPPS exhibits remarkable electrocatalytic activity toward the oxidation of glucose with a linear response range (0.1-15 mM; R(2) = 0.999), low detection limit (0.79 µM) and high sensitivity (66.3 µA mM(-1) cm(-2)). In addition, the glucose sensor prepared by the MFA LBL method also shows good selectivity and reproducibility as well as resistance to poisoning in a chloride ion solution. Therefore, the novel strategy in this work creates new opportunities for the fabrication of nonenzyme sensors with prospective applications in practical detection.

Stable and efficient loading of silver nanoparticles in spherical polyelectrolyte brushes and the antibacterial effects.

A more efficient and convenient strategy was demonstrated to immobilize silver nanoparticles (NPs) with a crystalline structure into the spherical polyelectrolyte brushes (SPB) as an antibacterial material. The SPB used for surface coating (Ag immobilized PVK-PAA SPB) consists of a poly(N-vinylcarbazole) (PVK) core and poly(acrylic acid) (PAA) chain layers which are anchored onto the surface of PVK core at one end. Well-dispersed silver nanoparticles (diameter∼3.5 nm) then formed and were electrostatically confined in the brush layer. Ag content is controlled by a repeated loading process. Thin film coatings were then constructed by layer-by-layer depositions of positive charged poly(diallyldimethylammonium chloride) (PDDA) and SPB. The multilayer composites display excellent stability as well as antibacterial performance but not for simple PVK-PAA coated surface. The results show that almost complete bacteria growth including both dispersed bacterial cells and biofilms was inhibited over a period of 24 h. This approach opens a novel strategy for stable and efficient immobilization of Ag NPs in fabrication of antibacterial materials.

Activated sludge filterability improvement by nitrifying bacteria abundance regulation in an adsorption membrane bioreactor (Ad-MBR).

Autotrophic nitrifying bacteria have its intrinsic properties including low EPS production, dense colonial structure and slow-growth rate, favoring the sludge filterability improvement. An adsorption-MBR (Ad-MBR) was developed to enrich nitrifier abundance in the MBR chamber by inlet C/N regulation, and its possible positive effect on sludge filterability and underlying mechanisms were investigated. By DNA extraction, PCR amplification and Illumina high-throughput pyrosequencing, the abundance of nitrifying bacteria was accurately quantified. More than 8.29% nitrifier abundance was achieved in Ad-MBR sludge, which was above three times of that in conventional MBR. Regulated C/N ratio and thereafter nitrifier abundance enrichment improved sludge filterability by altering sludge mixture and its supernatant properties, reflected by a good sludge settleability, a low supernatant viscosity and turbidity, a low supernatant organic substances concentration, and a small amount of strong hydrophobic fractional components, thus to profoundly improve sludge filterability and decelerate membrane fouling.

Aerobic methane oxidation coupled to denitrification in a membrane biofilm reactor: treatment performance and the effect of oxygen ventilation.

Aerobic methane-oxidation coupled to denitrification (AME-D) process was successfully achieved in a membrane biofilm reactor (MBfR). PVDF membrane was employed to supply the methane and oxygen for biofilm, which was coexistence of methanotrophs and denitrifier. With a feeding NO3(-)-N of 30 mg/L, up to 97% nitrate could be removed stably. The oxygen ventilation modes impacted the denitrification performance remarkably, resulting in different nitrate removal efficiencies and biofilm microorganism distribution. The biofilm sludge showed a high resistance to the DO inhibition, mainly due to the co-existing methanotroph being capable of utilizing oxygen perferentially within biofilm, and create an anoxic micro-environment. The denitrification of both nitrate and nitrite by biofilm sludge conformed to the Monod equation, and the maximum specific nitrate utilization rate (k) ranged from 1.55 to 1.78 NO3(-)-N/g VSS-d. The research findings should be significant to understand the considerable potential of MBfR as a bioprocess for denitrification.