RESUMEN
All the disciplines of science, especially biotechnology, have given continuous attention to the area of enzyme immobilization. However, the structural support made by material science intervention determines the performance of immobilized enzymes. Studies have proven that nanostructured supports can maintain better catalytic performance and improve immobilization efficiency. The recent trends in the application of nanofibers using natural polymers for enzyme immobilization have been addressed in this review article. A comprehensive survey about the immobilization strategies and their characteristics are highlighted. The natural polymers, e.g., chitin, chitosan, silk fibroin, gelatin, cellulose, and their blends with other synthetic polymers capable of immobilizing enzymes in their 1D nanofibrous form, are discussed. The multiple applications of enzymes immobilized on nanofibers in biocatalysis, biosensors, biofuels, antifouling, regenerative medicine, biomolecule degradation, etc.; some of these are discussed in this review article.
Asunto(s)
Técnicas Biosensibles , Nanofibras , Enzimas Inmovilizadas/metabolismo , Nanofibras/química , Polímeros/química , BiocatálisisRESUMEN
The arrangement and type of support has a significant impact on the efficiency of immobilized enzymes. 1-dimensional fibrous materials can be one of the most desirable supports for enzyme immobilization. This is due to their high surface area to volume ratio, internal porosity, ease of handling, and high mechanical stability, all of which allow a higher enzyme loading, release and finally lead to better catalytic efficiency. Fortunately, the enzymes can reside inside individual nanofibers to remain encapsulated and retain their three-dimensional structure. These properties can protect the enzyme's tolerance against harsh conditions such as pH variations and high temperature, and this can probably enhance the enzyme's stability. This review article will discuss the immobilization of enzymes on synthetic polymers, which are fabricated into nanofibers by electrospinning. This technique is rapidly gaining popularity as one of the most practical ways to fibricate polymer, metal oxide, and composite micro or nanofibers. As a result, there is interest in using nanofibers to immobilize enzymes. Furthermore, present research on electrospun nanofibers for enzyme immobilization is primarily limited to the lab scale and industrial scale is still challanging. The primary future research objectives of this paper is to investigate the use of electrospun nanofibers for enzyme immobilization, which includes increasing yield to transfer biological products into commercial applications.
Asunto(s)
Biocatálisis , Técnicas Electroquímicas/métodos , Enzimas Inmovilizadas , Nanofibras/química , Polímeros , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Polímeros/química , Polímeros/metabolismoRESUMEN
Prolonged retention of losartan potassium in the upper gastrointestinal tract is anticipated to increase its absorption and exposure to CYP450 enzyme subfamilies, undertaking its conversion to more potent (10-40 times) active metabolite, losartan carboxylic acid (LCA). Consistent with this, hydroxypropyl methylcellulose K4M/ethyl cellulose-based novel expandable films (EFs) containing losartan potassium (LP) suitable for prolonged retention in the stomach were developed. The films were prepared by solvent casting method. USP type II dissolution apparatus (0.1 N HCl, 37°C, 100 rpm) was used to perform the dissolution testing (drug release, unfolding behavior, film integrity, erosion, and water uptake) of the films. In vivo pharmacokinetic studies were carried out in rabbits. An HPLC-UV method was used for the quantification of the drug and its active metabolite in plasma. These folded films placed inside hard gelatin capsule shells unfolded to full dimensions in dissolution medium and provided sustained drug release throughout 12 h. The plasma drug concentration-time curves obtained from the in vivo studies were used to determine pharmacokinetic parameters, such as area under the plasma drug concentration-time curve (AUC), area under first moment curve (AUMC), mean residence time (MRT), Cmax, Tmax, t1/2, ke, and Fr in comparison with that of the market formulation, Cozaar®. The novel EFs significantly changed the pharmacokinetic parameters of the drug and its active metabolite. The apparent elimination rate constant (ke) significantly decreased, while MRT and elimination half-life (t1/2) increased in both cases. The relative bioavailabilities (Fr) of both LP and E3174 using the novel formulation were higher than that of Cozaar®.
Asunto(s)
Celulosa , Losartán , Animales , Disponibilidad Biológica , Celulosa/análogos & derivados , Preparaciones de Acción Retardada/farmacocinética , Losartán/farmacocinética , ConejosRESUMEN
Essential oils prevent superbug formation, which is mainly caused by the continuous use of synthetic drugs. This is a significant threat to health, the environment, and food safety. Plant extracts in the form of essential oils are good enough to destroy pests and fight bacterial infections in animals and humans. In this review article, different essential oils containing polymeric nanofibers fabricated by electrospinning are reviewed. These nanofibers containing essential oils have shown applications in biomedical applications and as food-packaging materials. This approach of delivering essential oils in nanoformulations has attracted considerable attention in the scientific community due to its low price, a considerable ratio of surface area to volume, versatility, and high yield. It is observed that the resulting nanofibers possess antimicrobial, anti-inflammatory, and antioxidant properties. Therefore, they can reduce the use of toxic synthetic drugs that are utilized in the cosmetics, medicine, and food industries. These nanofibers increase barrier properties against light, oxygen, and heat, thereby protecting and preserving the food from oxidative damage. Moreover, the nanofibers discussed are introduced with naturally derived chemical compounds in a controlled manner, which simultaneously prevents their degradation. The nanofibers loaded with different essential oils demonstrate an ability to increase the shelf-life of various food products while using them as active packaging materials.
Asunto(s)
Embalaje de Alimentos , Nanofibras/química , Aceites Volátiles/química , Polímeros/química , Animales , Composición de Medicamentos , Humanos , Nanofibras/ultraestructura , Andamios del Tejido/químicaRESUMEN
The present paper describes the addition of nitroxide-functionalized graphene oxide (GOFT) into polyamide 6 (PA6) micro- and nanofibers, which are obtained through electrospinning. Scanning electron microscopy micrographs demonstrate the presence of fibers. Tensile testing presents an unexpected and non-obvious behavior, in which the Young's modulus, tensile strength, and elongation simultaneously and remarkably increase compared to the pristine polymer nanofibers. GOFT induces the hydrogen bonding between the NH group from PA6 with the functional groups, thus promoting higher crystallinity of the polymer matrix. Nonetheless, deconvoluted curves by differential scanning calorimetry reveal the presence of two quasi-steady polymorphs (ß and δ phases) contributing to 46% of the total crystallinity. This evidence suggests that their presence and high ratios are responsible for the unexpected and simultaneous enhancement of tensile properties.
Asunto(s)
Nanofibras , Nylons , Caprolactama/análogos & derivados , Grafito , PolímerosRESUMEN
Naturally bone is a hierarchical and highly integrative dynamic tissue that is continuously remodeled by osteoblasts and osteoclasts. Deformities in bone due to trauma and/or disease are highly prevalent and mostly need surgical intervention. However, the methods of surgical treatments are associated with donor site morbidity, infection and/or complete rejection. Bone tissue-engineering provides a platform for growth of new bone tissue by fabricating scaffolds along with cells, growth factors and other dynamic forces. The polymeric materials especially natural polymers in their nanofibrous forms have been developed and introduced for bone tissue regeneration. At the nanoscale, natural polymers possess tunable properties and can be surface functionalized or blended with other polymers to provide juncture for cell-seeding, proliferation, differentiation and further resulting in regenerated tissue formation. These scaffolds fabricated from natural polymers and additives by electrospinning are bio-inspired to mimic the natural extracellular matrix resembling the native collagen of bone. This chapter focuses on the fabrication techniques as state of art nanofibrous scaffolds from natural polymers/additives during the recent years by the process of electrospinning for use in bone tissue regeneration. Further on, this chapter highlights the development in the scaffold fabrication from natural polymers like silk fibroin, chitosan, collagen, gelatin, cellulose, starch and, zein. The importance of add-on materials like stem cells, hydroxyapatite, apatite-wollanstonite, growth factors, osteogenic cells, bone morphogenic proteins and osteogenic drugs have been discussed and illustrated by various examples for enhancing the formation of new bone tissue. Furthermore, this chapter explains how these natural polymers influence the several signaling pathways to regulate bone regeneration.
Asunto(s)
Regeneración Ósea , Nanofibras , Ingeniería de Tejidos , Andamios del Tejido , Proliferación Celular , Humanos , Polímeros , Transducción de SeñalRESUMEN
Tissue-engineering is emerging field and can be considered as a novel therapeutic intervention in nerve tissue-regeneration. The various pitfalls associated with the use of autografts in nerve-regeneration after injuries have inspired researchers to explore the possibilities using various natural polymers. In this context, the present chapter summarizes the advances of the various types of natural polymeric scaffolds such as fibrous scaffolds, porous scaffolds, and hydrogels in nerve-regeneration and repair process. The functionalization of the scaffolds with wide-range of biomolecules and their biocompatibility analysis by employing various cells (e.g., mesenchymal, neural progenitor stem cells) along with the in vivo regeneration outcomes achieved upon implantation are discussed here. Besides, the various avenues that have been explored so far in nerve tissue-engineering, the use of the extracellular matrix in enhancing the functional polymeric scaffolds and their corresponding outcomes of regeneration are mentioned. We conclude with the present challenges and prospects of efficient exploration of natural polymeric scaffolds in the future to overcome the problems of nerve-regeneration associated with various nerve injuries and neurodegenerative disorders.
Asunto(s)
Regeneración Nerviosa , Tejido Nervioso , Ingeniería de Tejidos , Andamios del Tejido , Humanos , PolímerosRESUMEN
Zinc oxide (ZnO) nanostructures have been commonly studied for electronic purposes due to their unique piezoelectric and catalytic properties; however, recently, they have been also exploited for biomedical applications. The purpose of this study was to fabricate ZnO-doped poly(urethane) (PU) nanocomposite via one-step electrospinning technique. The utilized nanocomposite was prepared by using colloidal gel composed of ZnO and PU, and the obtained mats were vacuum dried at 60 °C overnight. The physicochemical characterization of as-spun composite nanofibers was carried out by X-ray diffraction pattern, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, electron probe microanalysis, and transmission electron microscopy, whereas the thermal behavior was analyzed by thermogravimetric analysis. The viability, attachment, and proliferation of NIH 3T3 mouse fibroblast cells on the ZnO/PU composite nanofibers were analyzed by in vitro cell compatibility test. The morphological features of the cells attached on nanofibers were examined by Bio-SEM. We conclude that the electrospun nanofibrous scaffolds with unique spider nets had good biocompatibility. Cytotoxicity experiments indicated that the mouse fibroblasts could attach to the nanocomposite after being cultured. Thus, the current work demonstrates that the as-synthesized ZnO/PU hybrid nanofibers represent a promising biomaterial to be exploited for various tissue engineering applications.
Asunto(s)
Materiales Biocompatibles/química , Nanofibras/química , Poliuretanos/química , Ingeniería de Tejidos/instrumentación , Andamios del Tejido/química , Óxido de Zinc/química , Animales , Supervivencia Celular , Técnicas Electroquímicas , Ratones , Microscopía Electrónica , Células 3T3 NIH , Difracción de Rayos XRESUMEN
In this study, polyurethane (PU) and cellulose acetate (CA) electrospun fibers encapsulating rosemary essential oil (REO) and adsorbed silver (Ag) nanoparticles (NPs) were fabricated. The biologically inspired materials were analyzed for physicochemical characteristics using scanning electron microscopy, X-ray diffractometer, Fourier transform infrared, thermal gravimetric analysis, X-ray photoelectron spectroscopy, water contact angle, and water uptake studies. Results confirmed the presence of CA and Ag NPs on the PU micro-nanofibers increased the hydrophilicity from 107.1 ± 0.36o to 26.35 ± 1.06o. The water absorption potential increased from 0.07 ± 0.04 for pristine PU fibers to 12.43 ± 0.49 % for fibers with 7 wt% of CA, REO, and Ag NPs. The diffractometer confirmed the 2θ of 38.01°, 44.13o, and 64.33o, corresponding to the diffraction planes of Ag on the fibers. The X-ray photoelectron spectroscopy confirmed microfibers interfacial chemical interaction and surface changes due to CA, REO, and Ag presence. The inhibition tests on Staphylococcus aureus and Escherichia coli indicated that composites are antibacterial in activity. Moreover, synergistic interactions of REO and Ag NPs resulted in superior antibacterial activity. The cell viability and attachment assay showed improved hydrophilicity of the fibers, which resulted in better attachment of cells to the micro-nanofibers, similar to the natural extracellular matrix in the human body.
Asunto(s)
Nanopartículas del Metal , Nanofibras , Aceites Volátiles , Rosmarinus , Humanos , Poliuretanos , Plata/química , Nanopartículas del Metal/química , Nanofibras/química , Antibacterianos/farmacología , Antibacterianos/química , Aceites Volátiles/farmacología , Cicatrización de HeridasRESUMEN
Bone development is a complex process involving a vast number of growth factors and chemical substances. These factors include transforming growth factor-beta, platelet-derived growth factor, insulin-like growth factor, and most importantly, the bone morphogenetic protein, which exhibits excellent therapeutic value in bone repair. However, the spatial-temporal relationship in the expression of these factors during bone formation makes the bone repair a more complicated process to address. Thus, using a single therapeutic agent to address bone formation does not seem to provide a clinically effective option. Conversely, a dual delivery approach facilitating the co-delivery of agents has proved to be a dynamic alternative since such a strategy can provide more efficient spatial-temporal action. Such delivery systems can smartly target more than one pathway or differentiation lineage and thus offer more efficient bone regeneration. This review discusses various dual delivery strategies reported in the literature employed to achieve improved bone regeneration. These include concurrent use of different therapeutic agents (including growth factors and drugs), enhancing bone formation and cell recruitment, and improving the efficiency of bone healing.
Asunto(s)
Materiales Biocompatibles , Proteína Morfogenética Ósea 2 , Regeneración Ósea , Huesos , OsteogénesisRESUMEN
Cellulose nanofibers, which are troublesome to spin into fibers, can be easily fabricated by post-regeneration of its acetate-derived threads. Cellulose is a natural polymer; it enjoys better biocompatibility, cellular mimicking, and hydrophilic properties than its proportionate analog. Herein, we regenerated acetate-free nanofibers by alkaline de-acetylation of as-spun nanofibers. The resultant cellulose nanofibers previously loaded with hydroxyapatite (HAp) were immobilized using silver (Ag) nanoparticles (NPs) by reduction of adsorbed Ag ions on using sodium borohydride. These amalgamated nanofibers were characterized for SEM, EDX, TEM, FTIR, and hydrophilicity tests revealing the existence of both HAp and Ag NPs in/on the nanofiber scaffolds. The de-acetylation of composite nanofibers resulted in spontaneous hydrophilicity. These nanofibers were cytocompatible, as resolved by MTT assay conducted on chicken embryo fibroblasts. The SEM of the samples after cell culture revealed that these composites allowed a proliferation of the fibroblasts over and within the nanofiber network, and increased concentration of HAp levitated the excessive of apatite formation as well as increased cell growth. The antimicrobial activity of these nanofibers was assessed on E. coli (BL21) and S. aureus, suggesting the potential of de-acetylated nanofibers to restrain bacterial growth. The degradation study for 10, 30, and 60 days indicated degradation of the fibers much is faster in enzymes as compared to degradation in PBS. The results certify that these nanofibers possess enormous potential for soft and hard tissue engineering besides their antimicrobial properties.
Asunto(s)
Nanofibras , Nanopartículas , Animales , Celulosa/análogos & derivados , Embrión de Pollo , Durapatita , Escherichia coli , Plata/farmacología , Staphylococcus aureus , Ingeniería de TejidosRESUMEN
The treatment of neurodegenerative diseases is still a challenging grindstone in reconstructive surgeries and regenerative medicine. The retention of mesenchymal stem cells (MSCs) to retain remarkable properties of differentiating into motor neuron-like cells and Schwann cells can prove to be effective in repairing disorders. Moreover, the ultrafine electrospun nanofibers provide a favorable and conducive platform for proliferation and differentiation of MSCs. The development of new 3D culture methods with electrospun scaffolds that closely mimic the physiological niche of cells will help us to understand the functional benefits of MSCs in regeneration process. This article highlights the protocols for isolation of MSCs from rat bone marrow and their subsequent culture on nanofiber scaffolds. Furthermore, this chapter summarizes the various procedures including isolation of the MSCs, their seeding on electrospun nanofibrous scaffolds, and their proliferation and differentiation into neural lineage upon appropriate induction. The materials and preparation of various reagents used at different steps of the protocol are also summarized in detail.
Asunto(s)
Técnicas de Cultivo de Célula/métodos , Diferenciación Celular , Linaje de la Célula , Células Madre Mesenquimatosas/citología , Regeneración Nerviosa , Neuronas/citología , Polímeros/química , Andamios del Tejido/química , Animales , Separación Celular , Supervivencia Celular , Células Cultivadas , Ratas , Reacción en Cadena en Tiempo Real de la PolimerasaRESUMEN
Transmucosal surfaces bypass many limitations associated with conventional drug delivery (oral and parenteral routes), such as poor absorption rate, enzymatic activity, acidic environment and first-pass metabolism occurring inside the liver. However, these surfaces have several disadvantages such as poor retention time, narrow absorption window and continuous washout of the drug by the surrounding fluids. Electrospun nanofibers with their unique surface properties and encapsulation efficiency may act as novel drug carriers to overcome the challenges associated with conventional drug delivery routes, so as to achieve desired therapeutic responses. This review article provides detailed information regarding the challenges faced in the mucosal delivery of drugs, and the use of nanofiber systems as an alternative to deliver drugs to the systemic circulation, as well as local drug administration. The physiological and anatomical features of different types of mucosal surfaces and current challenges are systematically discussed. We also address future considerations in the area of transmucosal delivery of some important drugs.
Asunto(s)
Portadores de Fármacos/química , Nanofibras/química , Preparaciones Farmacéuticas/química , Portadores de Fármacos/metabolismo , Femenino , Humanos , Mucosa Bucal/metabolismo , Mucosa Nasal/metabolismo , Preparaciones Farmacéuticas/metabolismo , Polímeros/química , Vagina/metabolismoRESUMEN
Therapy based on stem cells utilizes these cells in neurodegeneration, brain/spinal cord injury, and much recently in repairing of severe heart diseases. Owning to their stemness, these cells are the potential source of progenitors that can offer a therapeutic remedy to a variety of diseases and/or disorders. The ability of these cells to regenerate and differentiate into specified phenotypes has great utility in tissue regeneration applications. This chapter provides a detailed account for isolation of neural stem cells from the mice embryo. Furthermore, the fabrication of chitosan-tripolyphosphate/hyaluronic acid-based nanoparticles and evaluating their efficiency in inducing transfection in the isolated neural stem cells as an approach for the treatment of neurodegenerative disorders.
Asunto(s)
Expresión Génica , Nanopartículas/química , Nanotecnología/métodos , Células-Madre Neurales/metabolismo , Polímeros/química , Transgenes , Animales , Muerte Celular , Células Cultivadas , Quitosano/análogos & derivados , Quitosano/química , Criopreservación , ADN/genética , Ácido Hialurónico/química , Ratones , Células-Madre Neurales/citología , Plásmidos/genética , TransfecciónRESUMEN
In the present work, a novel strategy was explored to fabricate nanofiber scaffolds consisting of cellulose assimilated with titanium dioxide (TiO2 ) and silver (Ag) nanoparticles (NPs). The concentration of the TiO2 NPs in the composite was adjusted to 1.0, 1.5, and 2.0 wt % with respect to polymer concentration used for the electrospinning of colloidal solutions. The fabricated composite scaffolds were dispensed to alkaline deacetylation using 0.05 M NaOH to remove the acetyl groups in order to generate pure cellulose nanofibers containing TiO2 NPs. Moreover, to augment our nanofiber scaffolds with antibacterial activity, the in situ deposition approach of using Ag NPs was utilized with varied molar concentrations of 0.14, 0.42, and 0.71 M. The physicochemical properties of the nanofibers were identified by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and contact angle meter studies. This demonstrated the presence of both TiO2 and Ag NPs and complete deacetylation of nanofibers. The antibacterial efficiency of the nanofibers was scrutinized against Escherichia coli and Staphylococcus aureus, revealing proper in situ deposition of Ag NPs and confirming the nanofibers are antibacterial in nature. The biocompatibility of the scaffolds was accustomed using chicken embryo fibroblasts, which confirmed their potential role to be used as wound-healing materials. Furthermore, the fabricated scaffolds were subjected to analysis in simulated body fluid at 37°C to induce mineralization for future osseous tissue integration. These results indicate that fabricated composite nanofiber scaffolds with multifunctional characteristics will have a highest potential as a future candidate for promoting new tissues artificially.
Asunto(s)
Antibacterianos/farmacología , Materiales Biocompatibles/farmacología , Celulosa/farmacología , Nanofibras/química , Plata/farmacología , Ingeniería de Tejidos , Andamios del Tejido/química , Titanio/farmacología , Acetilación/efectos de los fármacos , Animales , Calcificación Fisiológica/efectos de los fármacos , Adhesión Celular/efectos de los fármacos , Forma de la Célula/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Embrión de Pollo , Durapatita/química , Fibroblastos/citología , Fibroblastos/efectos de los fármacos , Interacciones Hidrofóbicas e Hidrofílicas , Pruebas de Sensibilidad Microbiana , Nanofibras/ultraestructura , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Mesenchymal stem cells (MSCs) owing their multipotency are known as progenitors for the regeneration of adult tissues including that of neuronal tissue. The repair and/or regeneration of traumatic nerves is still a challenging task for neurosurgeons. It is also a well-established fact that the microenvironment plays a primary role in determining the fate of stem cells to a specific lineage. In recent years, with the advent of nanotechnology and its positive influence on designing and fabrication of various 3D biomaterials have progressed to a greater extent. The production of 3D biomaterials such as nanofibers, conduits and hydrogels are providing a suitable environment for mimicking physiological niche of stem cells. These 3D biomaterials in combination with MSCs have been successfully analyzed for their potential in the regeneration of degenerative neurological disorders. This review primarily highlights the combinatorial effect of multipotent MSCs seeded on various 3D polymeric scaffolds in repair and regeneration of nervous tissue. The elaboration of MSCs from distinct sources reported so far in literature are summarized to understand their role in regeneration processes. Furthermore, we accentuate the application of 3D biomaterials especially the nanofibers, polymeric conduits, hydrogels infiltrated with MSCs harvested from distinct sources in the field of peripheral nerve regeneration studies.
Asunto(s)
Materiales Biocompatibles/uso terapéutico , Hidrogeles/uso terapéutico , Trasplante de Células Madre Mesenquimatosas , Células Madre Mesenquimatosas/metabolismo , Regeneración Nerviosa , Nervios Periféricos/fisiología , Animales , HumanosRESUMEN
Synthetic polymers, especially those with biocompatible and biodegradable characteristics, may offer effective alternatives for the treatment of severe wounds and burn injuries. Ideally, the scaffold material should induce as little pain as possible, enable quick healing, and direct the growth of defect-free epidermal cells. The best material with this multifunctionality, such as self-healing dressings, should be hydrophilic and have uninterrupted and direct contact with the damaged tissue. In addition, the ideal biomaterial should have some antibacterial properties. In this study, a novel technique was used to fabricate composite electrospun wound-dressing nanofibers composed of polyurethane encasing lavender oil and silver (Ag) nanoparticles (NPs). After electrospinning, the fabricated nanofibers were identified using various techniques, including scanning electron microscopy (SEM) and transmission electron microscopy (TEM). An abundance of Ag NPs in the fibers decreased the diameter of the fibers while increased concentration of the lavender oil increased the diameter. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) studies showed the presence of the lavender oil and Ag NPs in the fiber dressings. The Ag NPs and lavender oil improved the hydrophilicity of the nanofibers and ensured the proliferation of chicken embryo fibroblasts cultured in-vitro on these fiber dressings. The antibacterial efficiency of the nanofiber dressings was investigated using E. coli and S. aureus, which yielded zones of inhibition of 16.2⯱â¯0.8 and 5.9⯱â¯0.5â¯mm, respectively, indicating excellent bactericidal properties of the dressings. The composite nanofiber dressings have great potential to be used as multifunctional wound dressings; offering protection against external agents as well as promoting the regeneration of new tissue.
Asunto(s)
Antibacterianos/administración & dosificación , Nanopartículas del Metal/administración & dosificación , Nanofibras/administración & dosificación , Aceites Volátiles/administración & dosificación , Aceites de Plantas/administración & dosificación , Poliuretanos/administración & dosificación , Plata/administración & dosificación , Animales , Vendajes , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Embrión de Pollo , Escherichia coli/efectos de los fármacos , Escherichia coli/crecimiento & desarrollo , Fibroblastos/efectos de los fármacos , Lavandula , Staphylococcus aureus/efectos de los fármacos , Staphylococcus aureus/crecimiento & desarrollo , Cicatrización de HeridasRESUMEN
Electrospinning a versatile and the most preferred technique for the fabrication of nanofibers has revolutionized by opening unlimited avenues in biomedical fields. Presently, the simultaneous functionalization and/or post-modification of as-spun nanofibers with biomolecules has been explored, to serve the distinct goals in the aforementioned field. Starch is one of the most abundant biopolymers on the earth. Besides, being biocompatible and biodegradable in nature, it has unprecedented properties of gelatinization and retrogradation. Therefore, starch has been used in numerous ways for wide range of applications. Keeping these properties in consideration, the present article summarizes the recent expansion in the fabrication of the pristine/modified starch-based composite scaffolds by electrospinning along with their possible applications. Apart from electrospinning technique, this review will also provide the comprehensive information on various other techniques employed in the fabrication of the starch-based nanofibers. Furthermore, we conclude with the challenges to be overcome in the fabrication of nanofibers by the electrospinning technique and future prospects of starch-based fabricated scaffolds for exploration of its applications.
Asunto(s)
Biotecnología , Nanofibras , Almidón/química , Vendajes , Materiales Biocompatibles , Sistemas de Liberación de Medicamentos/métodos , Microscopía Electrónica de Rastreo , Peso Molecular , Polímeros/química , Solventes/química , Tensión Superficial , Ingeniería de Tejidos , Viscosidad , Cicatrización de HeridasRESUMEN
Previously, the nanofibers were predominantly fabricated from synthetic polymers due to their excellent mechanical properties. Understanding the different complex processes in fabrication and various process parameters involved have not only allowed the use of natural polymers for fabricating nanofibers but also broadened the scope of applications. To date, many of the natural polymeric composites have been fabricated by different functionalization techniques to increase their applicability. Nanofibers fabricated from natural polymers have been chemically functionalized by a variety of molecules like drugs, enzymes, metal ions etc. by techniques such as plasma treatment, wet chemical method, graft polymerization and co-electrospinning of surface-active molecules. Furthermore, the nanofibers derived from natural polymers have been surface-coated on the synthetic polymers to induce extracellular matrix mirroring properties like cell adhesion, migration, proliferation and differentiation. In this review, we have not only investigated the various novel and facile functionalization approaches but potential properties and applications are discussed as well. The various surface chemistry modifications of the natural polymeric nanofibers and their potential applications in drug delivery, enzymology, catalysis, filtration, biosensing and tissue engineering are discussed. In addition, a brief presentation of an overview of challenges and future scope with the aim of making them a clinical success has been presented.
Asunto(s)
Técnicas Biosensibles/instrumentación , Sistemas de Liberación de Medicamentos , Nanofibras/química , Polímeros/química , Ingeniería de Tejidos/métodos , Animales , Humanos , Propiedades de SuperficieRESUMEN
Ideal dermal substitutes should have comparable physicochemical and biological properties to the natural skin tissue. In this study, we report a novel strategy to "engineer" controlled 3D nanocomposite fibrous matrix of poly(ε-caprolactone) (PCL) and silk fibroin (SF) for an artificial dermis application. Using a custom-designed cold-plate electrospinning and automatic magnet agitation system, up to 6mm of the thickness was achieved resulting from the accumulation of ice crystal layers on the PCL nanofibers surface-modified with the SF particles. The sacrificed ice crystals induced interconnected macro-pores ranging from tens to hundreds µm. The agitation system introduced uniform distribution of the SF protein within/on the nanofibers, preventing the particles from precipitation and agglomeration. NIH 3T3 fibroblasts proliferated in vitro on the PCL and PCL/SF scaffolds for 7days, but there was no statistical difference between the groups. Conversely, In vivo rat model studies revealed that the wound healing rate and collagen deposition increased with the SF content within the nanocomposites. The unique 3D construct with the PCL/SF nanocomposite fibers provided desirable spatial cues, surface topography, and surface chemistry for the native cells to infiltrate into the scaffolds. The wound healing potential of the nanocomposites was comparable to the commercial Matriderm® artificial dermis.