Isolation, Purification of Phenolic Glycoside 1 from Moringa oleifera Seeds and Formulation of Its Liposome Delivery System.

In this study, N, N '-bis {4- [(α-L- rhamnosyloxy) benzyl]} thiourea (PG-1), a phenolic glycoside compound was purified from Moringa seed. The PG-1 has attracted extensive attention due to its anti-cancer, antioxidant, anti-inflammatory and hypoglycemic properties. However, some of its physicochemical properties such as oral bioavailability has not been studied. Herein, a highly purified PG-1 was extracted and incorporated in multiple layered liposomes (PG-1-L) to avoid its burst release and enhance oral bioavailability. After appropriate characterization, it was discovered that the obtained PG-1-L was stable, homogeneous and well dispersed with the average particle size being 89.26 ± 0.23 nm. Importantly, the in vitro release and in vivo oral bioavailability of PG-1-L were significantly improved compared with PG-1. In addition, MTT results showed that compared with the free PG-1, PG-1-L displayed obvious inhibitory effect on the HepG2 cells, while the inhibitory effect on healthy non-malignant 3T6 and LO-2 cells was not significant, indicating that PG-1-L had high safety. In conclusion, PG-1-L can be used as a promising delivery system and an ideal novel approach to improve the oral bioavailability and anticancer activity of PG-1.

Enhancement of oral bioavailability and anti-colitis effect of luteolin-loaded polymer micelles with RA (rosmarinic acid)-SS-mPEG as carrier.

OBJECTIVE: Polymer micelles were prepared (L-RSPMs) with luteolin and synthetic RA-SS-mPEG polymeric material before evaluation of their anti-inflammatory effect on 2, 4, 6-trinitro-benzene-sulfonic acid (TNBS)-induced ulcerative colitis (UC) model in rats. METHODS: The synthetic RA-SS-mPEG was characterized with NMR spectroscopy, before preparation of luteolin-coated RA-SS-mPEG polymer micelles. The in vitro characterization and evaluation of the formulation were accomplished, couple with its pharmacokinetic parameters. The levels of PEG2, MDA, CRP and GSH, as well as concentrations of TNF-α, IL1-ß, IL-6 and IL-10 in serum and colon tissue were detected via ELISA kit. The degree of colon injury and inflammation was evaluated via histopathologic examination. RESULTS: L-RSPMs displayed small average droplet size (133.40 ± 4.52 nm), uniformly dispersed (PDI: 0.163 ± 0.011), good stability, slow release and enhanced solubility. We observed 353.28% increase in the relative bioavailability of L-RSPMs compared to free luteolin, while the half-life of the micelle was extended by 6.16h. Compared to model (M) group, luteolin (low and high doses) and L-RSPMs (low and high doses) significantly reduced levels of MDA, PEG2, CRP, TNF-α, IL-6 and IL-1ß in colon tissue and serum of colitic rats but dose dependently increased IL-10 and SOD levels (p < 0.01). Histopathologic examination of colon showed that luteolin (low and high doses) and L-RSPMs (low and high doses) improved colonic inflammation in colitic rats to varying degrees compared to M group. CONCLUSION: L-RSPMs could improve TNBS-induced colon inflammation by enhancing bioavailability, promoting antioxidant effects and regulating cytokine release, which may become a potential agent for UC treatment in clinical settings.

Insight into the Molecule Impact of Critical-Sized UHMWPE-ALN Wear Particles on Cells by the Alginate-Encapsulated Cell Reactor.

Wear particles of ultra-high molecular weight polyethylene (UHMWPE) are inevitable during service as joint prosthesis, and particles ≤ 10 µm with critical size could cause serious osteolysis and aseptic loosening of joint prosthesis. The aim of this study is to adopt the alginate-encapsulated cell reactor to investigate the molecular impact of critical-sized wear particles of UHMWPE loaded with alendronate sodium (UHMWPE-ALN) on cells. Results showed that compared with UHMWPE wear particles, UHMWPE-ALN wear particles inhibited the proliferation of macrophages significantly after being co-cultured for 1, 4, 7, and 14 d. Furthermore, the released ALN promoted early apoptosis, suppressed the secretion of TNF-α and IL-6 of macrophages, and down-regulated relative gene expressions of TNF-α, IL-6, and IL-1ß and RANK. In addition, compared with UHMWPE wear particles, UHMWPE-ALN wear particles promoted the ALP activity of osteoblasts, down-regulated the gene expression of RANKL, and up-regulated gene expression of osteoprotegerin. There were mainly two approaches of the effects of critical-sized UHMWPE-ALN wear particles on cells, one of which was cytology and the other was cytokine signal pathway. The former mainly affected the proliferation and activity of macrophages and osteoblasts. The latter would inhibit osteoclasts via cytokine and RANKL/RANK signal pathway. Thus, UHMWPE-ALN had the potential application in clinics to treat osteolysis induced by wear particles.

Visual typing detection of brucellosis with a lateral flow immunoassay based on coloured latex microspheres.

AIMS: Treatment and preventive control strategies for Brucella melitensis (B. melitensis) and Brucella abortus (B. abortus) infection differ. A lateral flow immunoassay (LFIA) for the rapid typing and detection of brucellosis by using polychromatic dye-doped latex microspheres (LMs) as a labelling material was developed. METHODS AND RESULTS: This LFIA utilizes a double-antigen sandwich method in which the BP26 protein is used as the diagnostic antigen to detect brucellosis infection and the OMP31 protein is used as the identified antigen to distinguish between bovine and sheep brucellosis. Thus, people and animals infected with brucellosis can be diagnosed according to the different colours of the signals displayed on the detection lines. The results indicated that the accuracy of this assay was found to reach 98%, and the immunochromatographic test strip is highly accurate, shows good sensitivity and can facilitate typing diagnosis, among other features. CONCLUSIONS: The established LFIA can distinguish B. melitensis infection from B. abortus infection and produces results in a short period of time while retaining the advantages of LFIAs. SIGNIFICANCE AND IMPACT OF THE STUDY: This technology lays a foundation for the development of multi-disease test strips and the establishment of methods for rapid, multi-specimen quantitative detection and is thus of great importance for the development of medical diagnostic technologies.

Superhydrophilic polyethersulfone (PES) membranes with high scale inhibition properties obtained through bionic mineralization and RTIPS.

Reverse thermally induced separation (RTIPS) was used to obtain a separation membrane with a better internal structure for a higher water flux and a surface that could easily form a hydration layer. In comparison to the traditional modification method, this work focused on the aspect that the internal structure obtained by changing the membrane-making method provided easier adhesion conditions for the dopamine/TiO2 hybrid nanoparticles (DA/TiO2 HNPs) obtained by biomimetic mineralization. It provided a basis for exploring the variation in adhesion with the water bath temperature and the amount of titanium added through the study of turbidity point, SEM images, water contact angle, thermogravimetric test, EDX, AFM, XPS, FTIR and other test results. The SEM images proved that the membrane obtained through the RTIPS method had a porous surface and spongy internal structure, furthermore, additional polymers were adsorbed. Use of EDX demonstrated that biomimetic mineralization prevented the production of agglomerated titanium dioxide. XPS and FTIR spectra confirmed the introduction and immobilization of HNP aggregation. Moreover, a decrease in the surface roughness and water contact angle further suggested an improvement in the hydrophilicity of the modified membrane. The introduction of HNP at a higher water bath temperature helped increase the water flux up to ten times, moreover, the oil-water separation efficiency could still reach over 99.50%. Lastly, a cycle test of the modified membrane under the optimal conditions helped confirm that the membrane forming conditions at this time could provide a better environment for the formation of the hydrophilic layer, which was conducive to the recycling of the separation membrane. In summary, more fixed more hydrophilic particles could be obtained through the RTIPS method based on biomimetic mineralization to prevent the accumulation of titanium dioxide, thus helping improve permeability and anti-fouling of the membrane.

Preparation, in vitro and in vivo evaluation of pinocembrin-loaded TPGS modified liposomes with enhanced bioavailability and antihyperglycemic activity.

PURPOSE: To prepare polyethylene glycol succinate-vitamin E modified pinocembrin (PCB)-loaded liposomes (PCBT-liposomes) and evaluate PCBT-liposomal pharmacokinetics and antihyperglycemic activity. SIGNIFICANCE: The novel PCBT-liposomes demonstrated a promising application prospect as a nano drug carrier for future research. METHODS: Thin film dispersion was used to prepare PCBT-liposomes. We measured a series of characterization, followed by in vitro cumulative release, in vivo pharmacokinetic study, and antihyperglycemic activity evaluation. RESULTS: PCBT-liposomes displayed spherical and bilayered nanoparticles with mean particle size (roughly 92 nm), negative zeta potential (about -26.650 mV), high drug encapsulation efficiency (87.32 ± 1.34%) and good storage (at 4 or 25 °C) stability during 48 h after hydration. The cumulative release rate of PCBT-liposomes was markedly higher than free PCB in four different pH media. In vivo investigation showed that PCBT-liposomes could obviously improve oral bioavailability of PCB by 1.96 times, whereas the Cmax, MRT0-t, and T1/2 of PCBT-liposomes were roughly 1.700 ± 0.139 µg·mL-1, 12.695 ± 1.647 h, and 14.244 h, respectively. In terms of biochemical analysis, aspartate amino-transferase (AST), alanine amino-transferase (ALT), interleukin-1 (IL-1), and tumor necrosis factor-α (TNF-α) concentrations in serum of diabetic mice were respectively decreased 28.28%, 17.23%, 17.77%, and 8.08% after PCBT-liposomal treatment. CONCLUSION: These results show PCBT-liposomal preparation as an excellent nano-carrier which has the potential to improve water solubility, bioavailability, and antihyperglycemic activity of PCB, amid broadening the application of PCB in the clinical settings.

Pinocembrin polymeric micellar drug delivery system: preparation, characterisation and anti-hyperuricemic activity evaluation.

Aim: Hydrophobic pinocembrin (PCB) was incorporated into a new nano-drug delivery system to enhance solubility, bioavailability and anti-hyperuricemic activity of the drug.Methods: We fabricated PCB loaded polymeric micelles (PCB-FPM) by thin film dispersion method and appropriately determined their physical characteristics. The oral relative bioavailability and anti-hyperuricemic activity of PCB-FPM and free PCB were observed.Results: The optimum particle size of the micelles was 19.90 ± 0.93 nm. PCB-FPM exhibited great stability within 18 days, coupled with lower cytotoxicity and higher biocompatibility. Moreover, the percent cumulative release of PCB-FPM was much higher than free PCB in the dissolution media. The oral bioavailability of PCB-FPM was increased by 2.61 times compared with free PCB. Uric acid (UA) level of rats was reduced in PCB-FPM group (200 mg/kg) by 78.82% comparable to the model control.Conclusion: PCB-FPM may become an ideal strategy to increase oral in-vivo availability and anti-hyperuricemic activity of PCB.

Preparation of Pinocembrin-Loaded F127/MPEG-PDLLA Polymer Micelles and Anti-Osteoporotic Activity.

Pinocembrin (PCB) is 5,7-dihydroxyl flavanone and has multiple pharmacological activities, namely, anti-inflammation, anti-osteoporotic, and so on. However, low water solubility and bioavailability have hindered its application. Herein, we aimed to increase its bioavailability through preparation of F127/MPEG-PDLLA polymer micelles (PCB-M). We characterized the micelles through appropriate attributes such as analysis of particle size (PS), polydispersity (PDI), transmission electron microscopic (TEM) image, stability test, and evaluation of in vitro release of drug. After physical characterization, the respective PS, PDI, and entrapment efficiency (EE) of PCB-M were estimated to be 27.63 ± 0.17 nm, 0.055 ± 0.02, and 90.53 ± 0.01%. Fluorescence probe method was employed to measure critical micelle concentration (CMC) of PCB-M, we observed CMC was low, thereby suggesting that PCB-M had good stability. In vitro release analysis indicated that the rate of cumulative PCB release from PCB-M was greater than 90% in each medium compared with free PCB, which was less than 40%, thus pointing to a significantly improved solubility of PCB. In vivo pharmacokinetic results showed that oral biological availability of PCB-M increased 5.3 folds comparable to free PCB. The effects of PCB on osteoblasts and ALP activities were investigated; subsequently, zebrafish osteoporotic model was established with prednisolone to study the anti-osteoporotic effects of PCB and PCB-M. The results showed that PCB improved osteoporosis with PCB-M being more effective than free PCB. Finally, PCB-M can be used as a promising method to improve the solubility of PCB, while the bioavailability and anti-osteoporotic effect of PCB could be improved, thus laying a foundation for clinical use in the future.

808 nm Near-Infrared Light-Triggered Payload Release from Green Light-Responsive Donor-Acceptor Stenhouse Adducts Polymer-Coated Upconversion Nanoparticles.

Owing to deep activation in biotissues and enhanced targeting efficiency, developing photoresponsive polymer-upconversion nanoparticles (PP-UCNPs) nanovectors has witnessed rapid growth in the past decade. However, up to date, all developed nanovectors require high-order photon processes to initiate the release of cargos. The photodamage caused by high-power near-infrared laser light may be a critical obstacle to their clinical application. Here, for the first time, by leveraging absorption-emission spectral matching between donor-acceptor Stenhouse adducts (DASA) PP and UCNPs (λex , 808 nm) in the green region (≈530 nm), the designed nanovector is capable of releasing cargos at a low-power 808 nm excitation (0.2 W). Considering the high molar absorptivity, biobenign, and synthetic tunability of DASA, DASA PP can be utilized as an up-and-coming candidate to design and synthesize the next generation of upconversion nanovectors without photodamage.

Development of hydrophilic PES membranes using F127 and HKUST-1 based on the RTIPS method: Mitigate the permeability-selectivity trade-off.

In this study, to mitigate the permeability-selectivity trade-off effect, Pluronic F127 (F127) and HKUST-1 were employed to construct high-performance membranes based on the reverse thermally induced phase separation (RTIPS) method. F127, as a hydrophilic modifier, was applied to increase permeability and resist polyethersulfone (PES) membrane fouling, while the collapse of HKSUT-1 caused by its instability in pure water improved the permeability and selectivity of the membrane. Characterizations demonstrated the successful synthesis of HKUST-1, together with the successful introduction of HKSUT-1 and F127 in PES membranes. It was observed that the membrane prepared by the RTIPS process possessed a uniformly porous surface and sponge-like cross-section with excellent mechanical properties, higher permeability, and selectivity compared to the dense skin and finger-like cross-section of the membrane prepared by the nonsolvent induced phase separation (NIPS) method. Moreover, the permeation and bovine serum albumin (BSA) rejection rate of the optimal membrane reached 2378 L/m2 h and 89.3%, respectively, which were far higher than those of the pure membrane. Hydrophilic F127 and many microvoids formed by the collapse of HKUST-1, played an important role in excellent antifouling properties, high permeability, and selectivity by pure water flux (PWF), flux recovery rate (FRR), BSA flux, and COD removal rate tests. Overall, the membrane with F127 and HKSUT-1 prepared via the RTIPS method not only obtained excellent antifouling properties but also mitigated the permeability-selectivity trade-off.

Tumor-Targeted Delivery of Bufalin-Loaded Modified Albumin-Polymer Hybrid for Enhanced Antitumor Therapy and Attenuated Hemolysis Toxicity and Cardiotoxicity.

A novel albumin polymer hybrid with a core-shell structure was designed to target delivery of bufalin, which is an antineoplastic monomer with serious cardiotoxicity. The sheath layer was composed of ursodeoxycholic acid (UA)-modified bovine serum albumin (UA-BSA), while the stable core consisted of poly n-butyl cyanoacrylate (PBCA) nanoparticles. The UA-BSA was synthetized, and the substitution degree was characterized. The physical properties of bufalin-loaded UA-modified protein-PBCA nanocomplexes (BF-uPPNCs), such as morphology, particle size, and encapsulation efficiency, were evaluated. FTIR and DSC revealed the bufalin to be in an amorphous state. Furthermore, the in vitro release study indicated a sustained release profile of BF-uPPNCs. The MTT and cellular uptake study demonstrated that BF-uPPNCs significantly improved the inhibitory effect of the bufalin accompanied with an enhanced cell uptake capacity on HepG2 cells. In addition, in vivo research demonstrated that BF-uPPNCs had a better antitumor effect coupled with improved therapeutic effect, and reduced hemolysis, vascular irritation, and cardiotoxicity. This work therefore presented a novel albumin polymer hybrid with favorable stability, efficient tumor-targeted delivery potential, and side effect reduction ability, which can be a potential vehicle for an anticancer drug.

Development and application of a colloidal carbon test strip for the detection of antibodies against Mycoplasma bovis.

Mycoplasma bovis (M. bovis) is an important bovine mycoplasma implicated in economically important clinical diseases, such as respiratory diseases, otitis media, and mastitis. The prevalence of M. bovis-associated mastitis in both cattle and buffaloes has been increasingly recognized as a global problem. High morbidity rates and consequential economic losses have been devastating to the affected cattle and buffalo farms, especially those in developing countries. Therefore, a rapid and accurate method is urgently needed to detect M. bovis. In this study, a rapid and simple lateral flow strip for detecting antibodies against M. bovis was established that used carbon nanoparticles (CNPs) as the labelled materials. The results from the test strip were highly consistent with those from ELISA. The test showed high specificity (100%) and no cross-reaction with other bovine pathogens. The detection sensitivity of the test was also relatively high (97.67%). All the results indicated that the colloidal carbon test strip could serve as a simple, rapid, sensitive, and specific diagnostic method for detecting antibodies against M. bovis at cattle farms.

Sampling strategy and climatic implication of tree-ring cellulose oxygen isotopes of Hippophae tibetana and Abies georgei on the southeastern Tibetan Plateau.

The tree-ring cellulose oxygen isotopes (δ18O) for four trees of Hippophae tibetana and four trees of Abies georgei growing in different locations around the terminal moraine in Xincuo from 1951 to 2010 were measured to explore its potential for reconstructing climatic variations in the southeastern Tibetan Plateau. The mean and standard deviation of tree-ring δ18O at different heights do not have significant differences, and there are no significant differences in the mean and standard deviation of tree-ring δ18O between trees near the brook and trees at the top of moraine, indicating that we can collect samples for tree-ring δ18O analysis regardless of sampling heights and that the micro-environment does not affect tree-ring δ18O significantly. The mean inter-series correlations of cellulose δ18O for A. georgei/H. tibetana are 0.84/0.93, and the correlation between δ18O for A. georgei and H. tibetana is 0.92. The good coherence between inter-tree and inter-species cellulose δ18O demonstrates the possibility of using different species to develop a long chronology. Correlation analysis between tree-ring δ18O and climate parameters revealed that δ18O for A. georgei/H. tibetana had negative correlations (r = -0.62/r = -0.69) with relative humidity in July-August, and spatial correlation revealed that δ18O for A. georgei/H. tibetana reflected the regional Standardized Precipitation Evapotranspiration Index (29°-32° N, 88°-98° E). In addition, tree-ring δ18O in Xincuo has a significant correlation with tree-ring δ18O in Bhutan. The results indicate that cellulose δ18O for A. georgei and H. tibetana in Xincuo is a good proxy for the regional hydroclimate.

Study on critical-sized ultra-high molecular weight polyethylene wear particles loaded with alendronate sodium: in vitro release and cell response.

The aim of this study was to investigate the in vitro release and the effect of RAW 264.7 macrophages of critical-sized wear particles of ultra-high molecular weight polyethylene (UHMWPE) loaded with alendronate sodium (ALN), one of the most effective drugs to treat osteoporosis in clinic. The critical-sized UHMWPE-ALN 0.5 wt.% wear particles were prepared by vacuum gradient filtration combined with Pluronic F-68. In vitro release of ALN from critical-sized UHMWPE-ALN wear particles was investigated in phosphate buffered saline (PBS) at 37 °C with a shaker. Cell morphology, proliferation, lactate dehydrogenase (LDH) leakage and secretions of cytokines were evaluated after co-cultured with critical-sized UHMWPE-ALN wear particles in vitro. Results showed that ALN released from critical-sized UHMWPE-ALN wear particles included burst release and slow release in vitro. Macrophages would be chemotaxis and aggregated around the critical-sized UHMWPE-ALN or UHMWPE wear particle, which was phagocytosed with time. The proliferation of macrophages co-cultured with critical-sized UHMWPE-ALN wear particles was significantly decreased compared with that of critical-sized UHMWPE group. Meanwhile, the critical-sized UHMWPE-ALN wear particles significantly induced the LDH leakage of macrophages, which indicated the cell death. The death of macrophages induced by ALN was one of pathways to inhibit their proliferation. The secretions of cytokines (interleukin-6 and tumor necrosis factor-alpha) in critical-sized UHMWPE-ALN group were significantly lower than those in critical-sized UHMWPE group due to the released ALN. The present results suggested that UHMWPE-ALN had the potential application in clinic to treat osteolysis induced by wear particles.

Removal of hexavalent chromium from aqueous solution by calcined Zn/Al-LDHs.

In this study, Zn/Al-layered double hydroxides (Zn/Al-LDHs) were synthesized by a co-precipitation method and characterized with X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. Then the hexavalent chromium Cr(VI) adsorption experiments on calcined Zn/Al-LDHs were carried out to analyze the effects of pH, temperature, adsorption time, initial Cr(VI) concentration and adsorbent dosage on the removal of Cr(VI) from aqueous solutions. The maximum adsorption capacity for Cr(VI) on calcined Zn/Al-LDHs under optimal conditions was found to be over 120 mg/g. The kinetic and isotherm of Cr(VI) adsorption on calcined Zn/Al-LDHs can be described with the pseudo-second-order kinetic model and Langmuir isotherm, respectively.

Effect of autologous platelet-rich plasma in combination with bovine porous bone mineral and bio-guide membrane on bone regeneration in mandible bicortical bony defects.

OBJECTIVE: Growth factors contained in platelet-rich plasma (PRP) can induce osteoblast differentiation in certain studies, whereas in others, osteogenesis of PRP on mandible bone defects has not been proved clinically. The aim of the study was to investigate the effect of autologous PRP on the osteogenic potential of combining bovine porous bone mineral (BPBM) and bio-guide membrane (BGM) in promoting mandible bicortical bony defects in rabbits. METHODS: One circular mandible bicortical bony defects were created in each of 54 rabbits, which were divided into 3 groups: group 1: 18 of the defects were left unfilled as a negative control; group 2: 18 of the defects were grafted with autologous PRP and BPBM/BGM; group 3: 18 of the defects were grafted with BPBM/BGM without PRP. Animals were killed at 4, 8, and 12 weeks after operation. Harvested tissue and specimens were evaluated histologically and radiographically, and metabolized observation was performed. Histological parameters associated with osteoblast activities, bone trabecula, neovascularization, newly formed mineralized bone, rudimental grafts and connective tissue formation were measured. Densities of the bones at 4, 8, and 12 weeks were studied by radiographic. The bone defect closure ratio was measured at 12 weeks. The bone metabolized parameter alkaline phosphatase was also measured and compared between 4, 8, and 12 weeks. RESULTS: The platelet concentration of PRP is 4.19- to 4.43-fold to that of the whole blood. Histological analysis showed new bone formation at all therapeutic sites including BPBM/BGM grafts with or without PRP. A statistically significant difference in new bone formation between group PRP/BPBM/BGM and group BPBM/BGM was observed. Untreated defects of group control showed the less bone regeneration. There was significant difference of bone density between group PRP/BPBM/BGM and control, and group BPBM/BGM and control, at 4, 8, and 12 weeks postoperative. There were more bone defects filling, and the grafts were absorbed at 12 weeks of group PRP/BPBM/BGM compared with group BPBM/BGM. Defects treated with PRP/BPBM/BGM demonstrated significantly increased activity of osteoblasts, enhanced amount of mitochondria and rough endoplasmic reticulum in osteoblasts, and increased concentration of alkaline phosphatase at 4, 8, and 12 weeks compared with those treated with BPBM/BGM and control group. Complete closure ratio of bone defects treated with PRP/BPBM/BGM (50%) was significantly increased compared with that treated with BPBM/BGM (16.6%). CONCLUSIONS: The study suggested that PRP combination of BPBM and BGM had significant therapeutic effects on mandible bicortical bony defects of rabbits. The effects are associated with the high concentration of platelet in PRP and the porous configuration of BPBM. Although we cannot reveal the detailed statistical relationship of PRP on promoting BPBM/GBM osteoinductive effects, PRP demonstrated superior results of bone regeneration.

Migration and accumulation of microplastics in soil-plant systems mediated by symbiotic microorganisms and their ecological effects.

The coexistence of microorganisms in complex soil environments greatly affects the environmental behavior and ecological effects of microplastics (MPs). However, relevant studies are sparse, and internal mechanisms remain unclear. Herein, arbuscular mycorrhizal fungi (AMF), a common symbiotic microorganism in the soil-plant system, was proved to significantly affect MPs absorption and migration with a "size effect". Specifically, the existence of AMF accelerated small-sized MPs (0.5 µm) uptake but slowed large-sized MPs (2 µm) uptake in lettuce. The content of 0.5 µm MPs absorbed by plants with AMF was 1.26 times that of the non-AMF group, while the content of 2 µm MPs was only 77.62 % that of non-AMF group. Additionally, the different effects of microorganisms on the intake content of MPs with different particle sizes in plants also led to different toxic effects of MPs on lettuce, that is, AMF exacerbated small-size MPs toxicity in lettuce (e.g., reduced plant biomass, photosynthesis, etc), and it weakened large-sized MPs toxicity (e.g., increased plant height, antioxidant enzyme activity, etc). The above phenomenon mainly because of the change in AMF on the plant root structure, which can be visually observed through the intraradical and extraradical hyphae. The symbiotic structure (hyphae) formed by AMF and host plants root could enhance the absorption pathway for small-sized MPs in lettuce, although not for large-sized MPs. Additionally, the effects of AMF varied with the soil environment of differently sized MPs, which promoted the migration of small-particle MPs to plants but aggravated large-particle MPs fixation at the soil interface. These findings could deepen the understanding of MPs pollution in terrestrial systems and provide theoretical basis and technical support to accurately assess soil MPs pollution.

Matrine-loaded Nano-liposome Induces Apoptosis in Human Esophageal-squamous Carcinoma KYSE-150 Cells.

INTRODUCTION: Esophageal-squamous Cell Carcinoma (ESCC) is often diagnosed at the middle or late stage, thus requiring more effective therapeutic strategies. Pharmacologically, the anti-tumor activity of the principal active constituent of Sophora flavescens, matrine (MA), has been explored widely. Notwithstanding, it is significant to nanotechnologically enhance the anti-tumor activity of MA in view of its potential to distribute non-tumor cells. METHODS: Herein, MA-loaded Nano-Liposomes (MNLs) were prepared to enhance the effect of anti-ESCC. The MNL showed a smaller sized particle (25.95 ± 1.02 nm) with a low polydispersed index (PDI = 0.130 ± 0.054), uniform spherical morphology, good solution stability, and encapsulated efficiency (65.55% ± 2.47). Furthermore, we determined the characteristics of KYSE-150 cells by cell viability assay, IC50, Mitochondrial Membrane Potential (MMP), Western blot, and apoptotic analysis, which indicated that MNLs down-regulated the cell viability and IC50 in a concentration-dependent manner and induced a significant change in JC-1 fluorescence from red to green. RESULTS: The above observations resulted in increased Bax and Caspase-3 levels, coupled with a substantial decrease in Bcl-2 and apoptotic promotion at the advanced stage compared with MA. CONCLUSION: Based on these results, MNLs may serve as a more effective and promising therapeutic option for ESCC.

Self-adhesive, conductive, and multifunctional hybrid hydrogel for flexible/wearable electronics based on triboelectric and piezoresistive sensor.

Flexible electronics are highly developed nowadays in human-machine interfaces (HMI). However, challenges such as lack of flexibility, conductivity, and versatility always greatly hindered flexible electronics applications. In this work, a multifunctional hybrid hydrogel (H-hydrogel) was prepared by combining two kinds of 1D polymer chains (polyacrylamide and polydopamine) and two kinds of 2D nanosheets (Ti3C2Tx MXene and graphene oxide nanosheets) as quadruple crosslinkers. The introduced Ti3C2Tx MXene and graphene oxide nanosheets are bonded with the PAM and PDA polymer chains by hydrogen bonds. This unique crosslinking and stable structure endow the H-hydrogel with advantages such as good flexibility, electrical conductivity, self-adhesion, and mechanical robustness. The two kinds of nanosheets not only improved the mechanical strength and conductivity of the H-hydrogel, but also helped to form the double electric layers (DELs) between the nanosheets and the bulk-free water phase inside the H-hydrogel. When utilized as the electrode of a triboelectric nanogenerator (TENG), high electrical output performances were realized due to the dynamic balance of the DELs between the nanosheets and the H-hydrogel's inside water molecules. Moreover, flexible sensors, including triboelectric, and strain/pressure sensors, were achieved for human motion detection at low frequencies. This hydrogel is promising for HMI and e-skin.