Autologous Vascularization: A Method to Enhance the Antibacterial Adhesion Properties of ePTFE.

BACKGROUND: Expanded polytetrafluoroethylene (ePTFE), an ideal bioimplant material, is commonly used in surgical repair to treat soft tissue defects and deformities. However, the main disadvantage of ePTFE is that its distinctive porous ultrastructure is prone to bacterial adhesion that gives rise to infection and chronic inflammation, resulting in functional failure. Herein, a potentially promising approach to ePTFE autologous vascularization (AV-ePTFE) in vivo was established and developed to enhance the material's antibacterial properties. METHODS: Hematoxylin and eosin (H&E) staining and visual observation were performed to validate the intensity of the inflammatory response and related histological changes in surgical wounds after AV-ePTFE implantation. In addition, the antibacterial activities of AV-ePTFE were assessed by an in vitro bacterial adhesion assay and scanning electron microscope observation. RESULTS: The optimal time point of AV-ePTFE was 12 weeks after implantation. AV-ePTFE relieved inflammation based on an inflammation grading evaluation and expedited wound healing. Furthermore, AV-ePTFE effectively reduced the number of bacterial adhesions, inhibited bacterial biofilm formation, and prevented the occurrence of infection. CONCLUSIONS: We conclude that autologous vascularization is an effective method to improve the antibacterial adhesion properties and biocompatibility of ePTFE after implantation and that it may have a significant effect on clinical application of future porous biomaterials.

Complications from Nasolabial Fold Injection of Calcium Hydroxylapatite for Facial Soft-Tissue Augmentation: A Systematic Review and Meta-Analysis.

BACKGROUND: Despite its increasing usage of facial applications, there is a paucity of objective data regarding calcium hydroxylapatite (CaHA). OBJECTIVES: To systematically evaluate the complications from CaHA injection for facial soft tissue augmentation. METHODS: Published studies on CaHA injection for facial soft tissue enhancement were identified through searches of the PubMed, EMBASE, and Cochrane Controlled Trial databases. Only randomized, controlled trials comparing CaHA injection to either placebo or an active comparator for facial cosmetic use were included. The outcome measures were the count (n) and frequency (%) of each complication, including edema (swelling), erythema (redness), ecchymosis (bruising), pain, pruritus (itching), hematomas, nodules, and extrusions. RESULTS: Four studies on nasolabial fold (NLF) injection of CaHA consisting of two subgroups were included: (i) a CaHA-lidocaine vs CaHA subgroup and (ii) a CaHA vs hyaluronic acid (HA) subgroup. The addition of lidocaine to CaHA therapy displayed no significant effect on edema (RR (95% CI): 1.07 (0.94-1.21), P = .311), erythema (RR (95% CI): 0.91 (0.66-1.24), P = .544), ecchymosis (RR (95% CI): 1.04 (0.71-1.52), P = .843), pain (RR (95% CI): 0.88 (0.58-1.33), P = .553), or pruritus (RR (95% CI): 0.82 (0.45-1.50), P = .515). There was no significant difference between CaHA vs HA for hematomas (RR (95% CI): 0.24 (0.01-4.31), P = .332) or nodules (RR (95% CI): 0.18 (0.01-6.62), P = .353). There was no significant publication bias detected in either subgroup (Begg's test P > 0.05). CONCLUSIONS: These findings support the addition of lidocaine to NLF injection of CaHA and suggest an equivalence between CaHA and HA with respect to hematoma and nodule formation. LEVEL OF EVIDENCE 2: Risk.

Safety Precautions for the Corona Mortis using Minimally Invasive Ilioinguinal Approach in Treatment of Anterior Pelvic Ring Fracture.

OBJECTIVE: To explore the safety of the corona mortis of the minimally invasive plate insertion in treatment of the anterior pelvic ring fracture by studying the relationship between the vessel and the position of plate. METHOD: The corona mortis was dissected out of eight adult cadavers and were simulated for the insertion of the anterior ring minimally invasive plate, and the presence of the anastomotic branch (the corona mortis) in the suprapubic branch area was observed. After the Corona mortis stripped off, the data was measured, such as the length, vessel diameter, distance from the pubic tubercle, and the maximum vertical distance between the corona mortis and the pubis. The measured data and the previous literatures were analyzed to study the morphology of the corona mortis and the position relation between the corona mortis and the placement of subperiosteal tunnel through the minimally invasive ilioinguinal approach. RESULTS: Out of the 16 unilateral pelvises, the corona mortis were observed on 12 unilateral pelvises with an incidence rate of 75%. Amongst them, there were seven cases of vein anastomosis (incidence of 43.75%), three cases of arterial anastomosis (incidence of 18.75%), and two cases of both arterial anastomosis and vein anastomosis (incidence of 12.5%). The corona mortis length ranged between 24.5 and 37.5 mm (average of 30.7 ± 3.6 mm); the diameter ranged between 1.6 and 3.5 mm (average of 2.5 ± 0.5 mm) and the distance between the vessels and the pubic tubercle was between 53.9 and 65.2 mm (average of 59.0 ± 3.6 mm). Above the pubis, the corona mortis originated from the iliac or the inferior epigastric vessel. It crossed the pubic branch to the dorsal side of the pubis and proceeded downward to anastomize with the obturator vessels near the obturator. Toothless tweezers were used to peel and lift up the corona mortis from the pubic bone. The maximum vertical distance between the corona mortis and the pubis ranged between 8.8 and 18.3 mm (average of 12.6 ± 3.0 mm). CONCLUSION: The corona mortis have a high rate of incidence, with a large number of differences in the type and shape of blood vessels among patients. Following peeling, the movement between the corona mortis and pubic bone is limited. Nevertheless, the plate and bone exfoliator still passed safely. Therefore, when surgeons use the minimally invasive ilioinguinal approach to establish channels, the process of subperiosteal stripping must be performed to avoid any accidental injury.

Biofunctionalization of silicone rubber with microgroove-patterned surface and carbon-ion implantation to enhance biocompatibility and reduce capsule formation.

PURPOSE: Silicone rubber implants have been widely used to repair soft tissue defects and deformities. However, poor biocompatibility can elicit capsule formation, usually resulting in prosthesis contracture and displacement in long-term usage. To overcome this problem, this study investigated the properties of silicone rubber materials with or without a microgroove-patterned surface and with or without carbon (C)-ion implantation. MATERIALS AND METHODS: Atomic force microscopy, X-ray photoelectron spectroscopy, and a water contact angle test were used to characterize surface morphology and physicochemical properties. Cytocompatibility was investigated by a cell adhesion experiment, immunofluorescence staining, a Cell Counting Kit-8 assay, and scanning electron microscopy in vitro. Histocompatibility was evaluated by studying the inflammatory response and fiber capsule formation that developed after subcutaneous implantation in rats for 7 days, 15 days, and 30 days in vivo. RESULTS: Parallel microgrooves were found on the surfaces of patterned silicone rubber (P-SR) and patterned C-ion-implanted silicone rubber (PC-SR). Irregular larger peaks and deeper valleys were present on the surface of silicone rubber implanted with C ions (C-SR). The silicone rubber surfaces with microgroove patterns had stable physical and chemical properties and exhibited moderate hydrophobicity. PC-SR exhibited moderately increased dermal fibroblast cell adhesion and growth, and its surface microstructure promoted orderly cell growth. Histocompatibility experiments on animals showed that both the anti-inflammatory and antifibrosis properties of PC-SR were slightly better than those of the other materials, and there was also a lower capsular contracture rate and less collagen deposition around implants made from PC-SR. CONCLUSION: Although the surface chemical properties, dermal fibroblast cell growth, and cell adhesion were not changed by microgroove pattern modification, a more orderly cell arrangement was obtained, leading to enhanced biocompatibility and reduced capsule formation. Thus, this approach to the modification of silicone rubber, in combination with C-ion implantation, should be considered for further investigation and application.

Carbon Ion Implantation: A Good Method to Enhance the Biocompatibility of Silicone Rubber.

BACKGROUND: Silicone rubber and silicone rubber-based materials have been used as medical tissue implants in the field of plastic surgery for many years, but there are still some reports of adverse reactions to long-term implants. Earlier studies have shown that ion implantation could enhance the biocompatibility of biomaterials. However, whether ion implantation has a good effect on silicone rubber is unknown. METHODS: Three types of carbon ion silicone rubber were obtained by implanting three doses of carbon ions. Then, the antibacterial adhesion properties and the in vivo host responses were evaluated. The antibacterial adhesion properties were examined by plate colony counting, fluorescence staining, and scanning electron microscopic observation. The host responses were evaluated by surveying inflammation and fiber capsule formation that developed after subcutaneous implantation in Sprague-Dawley rats for 7, 30, 90, and 180 days. In addition, the possible mechanism by which ion implantation enhanced the biocompatibility of the biomaterial was investigated and discussed. RESULTS: Carbon ion silicone rubber exhibits less bacterial adhesion, less collagen deposition, and thinner and weaker tissue capsules. Immunohistochemical staining results for CD4, tumor necrosis factor-α, α-smooth muscle actin, and elastin showed the possible mechanism enhancing the biocompatibility of silicone rubber. These data indicate that carbon ion silicone rubber exhibits good antibacterial adhesion properties and triggers thinner and weaker tissue capsules. In addition, high surface roughness and high zeta potential may be the main factors that induce the unique biocompatibility of carbon ion silicone rubber. CONCLUSION: Ion implantation should be considered for further investigation and application, and carbon ion silicone rubber could be a better biomaterial to decrease silicone rubber-initiated complications.

Clinical features and management of Crohn's disease in Chinese patients.

BACKGROUND: An increasing incidence of Crohn's disease has been found in China in recent years. Our study has been focused on evaluating the diversity of the clinical manifestations of Crohn's disease in order to improve early diagnostic accuracy and therapeutic efficacy. METHODS: Thirty patients with active Crohn's disease were enrolled and their clinical data, including diagnostic and therapeutic results, were analyzed. Endoscopy combined with histological examination of biopsy specimens provided characteristic features of the disease. Transabdominal bowel sonography (TABS) was used for detecting intestinal complications. Nutritional supportive therapy was given to 20 subjects with active cases of the disease. RESULTS: Most patients were young adults with a higher proportion of females to males (ratio: 1.14:1). The disease affects any segment or a combination of segments along with the alimentary tract (from the mouth to the anus). In this study, the colon and small bowel were the major sites involved. Recurrent episodes of abdominal pain in the right lower quadrant and watery diarrhea were the most common symptoms. Granulomas were identifiable in nearly one-third (30.8%) of all biopsy specimens. In moderate cases of the disease, remission was achieved more quickly through the use of oral prednisone therapy than with SASP or 5-ASA. Beneficial effects on the host's nutritional status were observed. Immunosuppressives were used on an individual basis and showed variable therapeutic effects. Sixteen patients had surgery due to intestinal obstruction or failure to respond to drug therapies. Rapid improvement after surgery was reported. CONCLUSION: Endoscopy (with biopsy) and TABS were both crucial procedures for diagnosis. SASP (or 5-ASA) and prednisone were effective as inductive therapies. Azathioprine has demonstrable benefits after induction therapy with prednisone. Surgery, as an alternative treatment, provided another effective choice in selected patients.

Hydroxyapatite-coated sillicone rubber enhanced cell adhesion and it may be through the interaction of EF1ß and γ-actin.

Silicone rubber (SR) is a common soft tissue filler material used in plastic surgery. However, it presents a poor surface for cellular adhesion and suffers from poor biocompatibility. In contrast, hydroxyapatite (HA), a prominent component of animal bone and teeth, can promote improved cell compatibility, but HA is an unsuitable filler material because of the brittleness in mechanism. In this study, using a simple and economical method, two sizes of HA was applied to coat on SR to counteract the poor biocompatibility of SR. Surface and mechanical properties of SR and HA/SRs confirmed that coating with HA changes the surface topology and material properties. Analysis of cell proliferation and adhesion as well as measurement of the expression levels of adhesion related molecules indicated that HA-coated SR significantly increased cell compatibility. Furthermore, mass spectrometry proved that the biocompatibility improvement may be related to elongation factor 1-beta (EF1ß)/γ-actin adjusted cytoskeletal rearrangement.

Osteopontin (OPN) is an important protein to mediate improvements in the biocompatibility of C ion-implanted silicone rubber.

Medical device implants are drawing increasing amounts of interest from modern medical practitioners. However, this attention is not evenly spread across all such devices; most of these implantable devices can cause adverse reactions such as inflammation, fibrosis, thrombosis, and infection. In this work, the biocompatibility of silicone rubber (SR) was improved through carbon (C) ion implantation. Scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) results confirmed that these newly generated carbon-implanted silicone rubbers (C-SRs) had large, irregular peaks and deep valleys on their surfaces. The water contact angle of the SR surface decreased significantly after C ion implantation. C ion implantation also changed the surface charge distribution, silicone oxygen rate, and chemical-element distribution of SR to favor cell attachment. The dermal fibroblasts cultured on the surface C-SR grew faster and showed more typical fibroblastic shapes. The expression levels of major adhesion proteins, including talin-1, zyxin, and vinculin, were significantly higher in dermal fibroblasts cultured on C-SR coated plates than in dermal fibroblasts cultured on SR. Those same dermal fibroblasts on C-SRs showed more pronounced adhesion and migration abilities. Osteopontin (OPN), a critical extracellular matrix (ECM) protein, was up-regulated and secreted from dermal fibroblasts cultured on C-SR. Matrix metalloproteinase-9 (MMP-9) activity was also increased. These cells were highly mobile and were able to adhere to surfaces, but these abilities were inhibited by the monoclonal antibody against OPN, or by shRNA-mediated MMP-9 knockdown. Together, these results suggest that C ion implantation significantly improves SR biocompatibility, and that OPN is important to promote cell adhesion to the C-SR surface.

A homologous promoterless K-ras cDNA targeting endogenous K-ras expression inhibits human pancreatic cancer cell growth in vitro and in vivo.

It has been reported that the local introduction of a promoter-less DNA containing the complementary DNA (cDNA) sequence of a gene could induce gene-specific silencing in plants. The feasibility of this kind of silencing in human cancer cells is as yet unknown. The current study was designed to investigate the anti-tumor effects of a homologous promoterless K-ras cDNA system on pancreatic cancer. A full-length K-ras cDNA fragment was cloned into the promoterless plasmid puc19 to yield puc-K-ras. This construct was then transfected into pancreatic cancer cells. Our results demonstrated that the transfection of a promoterless K-ras cDNA resulted in a significant decrease in endogenous K-ras in a dose- and time-dependent manner and induced pancreatic cell apoptosis. Furthermore, stable puc-K-ras transfection decreased the endogenous protein level of K-ras and inhibited cell proliferation, clone formation and tumorigenicity in vivo. These findings indicate a promising application of this homologous promoterless cDNA silencing system in pancreatic cancer gene therapy.