RESUMEN
Vibration and noise are ubiquitous in social life, which severely damage machinery and adversely affect human health. Thus, the development of materials with high-damping performance is of great importance. Rubbers are typically used as damping materials because of their unique viscoelasticity. However, they do not satisfy the requirements of different applications with various working conditions. In this study, the advantages of the high loss factor of styrene butadiene rubber (SBR) are combined with the strong designability of polyurethane. Hydroxyl-terminated solution-polymerized styrene butadiene rubbers (HTSSBRs) with different structures are prepared using anionic polymerization. HTSSBRs are then used as the soft segment during the synthesis of temperature-tunable high-damping performance polyurethanes (HTSSBR-polyurethanes (PUs)). The prepared HTSSBR-PUs with different structures exhibit excellent loss performance, a maximum loss factor (tan δmax ) of above 1.60, and an effective damping performance over a wide temperature range compared to traditional SBR and polyurethane. Therefore, this work offers an effective method for the design of damping materials with adjustable properties.
Asunto(s)
Butadienos , Poliuretanos , Butadienos/química , Elastómeros , Humanos , Polimerizacion , Poliuretanos/química , Estireno/química , EstirenosRESUMEN
Rubber composites make an important contribution to eliminating vibration and noise owing to their unique viscoelasticity. However, it is important to find alternative bio-based products with high damping properties owing to the shortage of petrochemical resources and poor performance. The ability to self-heal is an additional characteristic that is highly desirable because it can further increase the service life and safety of such products. In this study, a bio-based polylactic acid thermoplastic polyurethane (PLA-TPU) and its composites (PLA-TPU/AO-80) are synthesized. The reversible sacrificial hydrogen bonds in the composites increase the peak value of the loss factor (tan δmax ) from 0.87 to 2.12 with a high energy dissipation efficiency of 99% at 50% strain. After being heated for 15 min, the healed sample recovers 81.98% of its comprehensive mechanical properties due to the reorganization of the hydrogen bonds. Its tensile strength remains at 93.4% after recycling five times. Moreover, its shape memory properties show a response temperature close to the human body temperature making it an ideal candidate for medical applications.
Asunto(s)
Poliésteres , Poliuretanos , Humanos , Poliuretanos/química , Poliésteres/química , Resistencia a la Tracción , Temperatura , ViscosidadRESUMEN
The operation of mechanical equipment inevitably generates vibrations and noise, which are harmful to not only the human body but also to the equipment in use. Damping materials, which can convert mechanical energy into thermal energy, possess excellent damping properties in the glass transition region and can alleviate the problems caused by vibration and noise. However, these materials mainly rely on petroleum-based resources, and their glass transition temperatures (Tg) are lower than room temperature. Therefore, bio-based materials with high damping properties at room temperature must be designed for sustainable development. Herein, we demonstrate the fabrication of bio-based millable polyurethane (BMPU)/hindered phenol composites that could overcome the challenges of sustainable development and exhibit high damping properties at room temperature. BMPUs with a high Tg were prepared from modified poly (lactic acid)-based polyols, the unsaturated chain extender trimethylolpropane diallylether, and 4,4'-diphenylmethane diisocyanate, and 3,9-Bis-{1,1-dimethyl-2[ß-(3-tert-butyl-4-hydroxy-5-methylphenyl-)propionyloxy]ethyl}-2,4,8,10-tetraoxaspiro [5,5]-undecane (AO-80) was added to prepare BMPU/AO-80 composites. Finally, the properties of the BMPUs and BMPU/AO-80 composites were systematically evaluated. After adding 30 phr of AO-80, the Tg and maximum loss factor (tan δmax) of BMPU/AO-80 composites increased from 7.8 °C to 13.5 °C and from 1.4 to 2.0, respectively. The tan δmax showed an improvement of 43%. Compared with other polyurethanes, the prepared BMPU/AO-80 composites exhibited higher damping properties at room temperature. This study proposes a new strategy to reduce society's current dependence on fossil resources and design materials featuring high damping properties from sustainable raw materials.
Asunto(s)
Poliuretanos , TemperaturaRESUMEN
BACKGROUND: PEG-rhG-CSF reduces neutropenia and improves chemotherapy safety. In China's registration trial (CFDA: 2006L01305), we assessed its efficacy and safety against rhG-CSF, and prospectively explored its value over multiple cycles of chemotherapy. METHODS: In this open-label, randomized, multicenter phase 3 study, breast cancer patients (n = 569) were randomized to receive PEG-rhG-CSF 100 µg/kg, PEG-rhG-CSF 6 mg, or rhG-CSF 5 µg/kg/d after chemotherapy. The primary endpoints were the incidence and duration of grade 3/4 neutropenia during cycle 1. Secondary endpoints included the incidence and duration of grade 3/4 neutropenia during cycles 2-4, the incidence of febrile neutropenia, and the safety. RESULTS: A once-per-cycle PEG-rhG-CSF at either 100 µg/kg or 6 mg was not different from daily injections of rhG-CSF for either incidence or duration of grade 3/4 neutropenia. Interestingly, a substantial difference was noted during cycle 2, and the difference became bigger over cycles 3-4, reaching a statistical significance at cycle 4 in either incidence (P = 0.0309) or duration (P = 0.0289) favoring PEG-rhG-CSF. A significant trend toward a lower incidence of all-grade adverse events was noted at 129 (68.98%), 142 (75.53%), and 160 (82.47%) in the PEG-rhG-CSF 100 µg/kg and 6 mg and rhG-CSF groups, respectively (P = 0.0085). The corresponding incidence of grade 3/4 drug-related adverse events was 2/187 (1.07%), 1/188 (0.53%), and 8/194 (4.12%), respectively (P = 0.0477). Additionally, PFS in metastatic patients preferred PEG-rhG-CSF to rhG-CSF despite no significance observed by Kaplan-Meier analysis (n = 49, P = 0.153). CONCLUSIONS: PEG-rhG-CSF is a more convenient and safe formulation and a more effective prophylactic measure in breast cancer patients receiving multiple cycles of chemotherapy.
Asunto(s)
Protocolos de Quimioterapia Combinada Antineoplásica/efectos adversos , Neoplasias de la Mama Masculina/tratamiento farmacológico , Neoplasias de la Mama/tratamiento farmacológico , Neutropenia Febril Inducida por Quimioterapia/epidemiología , Factor Estimulante de Colonias de Granulocitos/uso terapéutico , Polietilenglicoles/uso terapéutico , Adulto , Anciano , Neoplasias de la Mama/mortalidad , Neoplasias de la Mama/patología , Neoplasias de la Mama Masculina/mortalidad , Neoplasias de la Mama Masculina/patología , Neutropenia Febril Inducida por Quimioterapia/etiología , Neutropenia Febril Inducida por Quimioterapia/prevención & control , China/epidemiología , Esquema de Medicación , Femenino , Factor Estimulante de Colonias de Granulocitos/administración & dosificación , Humanos , Incidencia , Estimación de Kaplan-Meier , Masculino , Persona de Mediana Edad , Polietilenglicoles/administración & dosificación , Supervivencia sin Progresión , Estudios Prospectivos , Proteínas Recombinantes/administración & dosificación , Proteínas Recombinantes/uso terapéutico , Adulto JovenRESUMEN
As a bio-based degradable plastic, polylactic acid (PLA) is highly commercialized, but its inherent brittleness limits its widespread use. In-situ polymerization techniques are effective in improving the toughness of PLA. However, the enhancement of the toughening effect in polyurethanes (PUs) through in-situ self-crosslinking still requires improvement and heavily relies on petroleum-derived feedstocks in certain approaches. In this paper, 1,3-polypropanediol (PO3G) of bio-based origin rather than conventional polyols like polyethylene glycol (PEG) and poly propylene glycol (PPG) was used. PLA/PO3G-PU blends were prepared via an in-situ self-crosslinking strategy. With a notch impact and tensile strength of 55.95 kJ/m2 and 47.77 MPa (a retention rate of 68.9 % compared with pure PLA), respectively, PLA/PO3G-PU blends achieved a better balance between stiffness and toughness. This work provides a new option for PLA to achieve a stiffness-toughness balance and get rid of dependence on petrochemical resources.
Asunto(s)
Poliésteres , Poliuretanos , Polietilenglicoles , Resistencia a la TracciónRESUMEN
OBJECTIVE: Charcot-Marie-Tooth disease (CMT) severely affects patient activity, and may cause disability. However, no clinical treatment is available to reverse the disease course. The combination of CRISPR/Cas9 and iPSCs may have therapeutic potential against nervous diseases, such as CMT. METHODS: In the present study, the skin fibroblasts of CMT type 2D (CMT2D) patients with the c.880G>A heterozygous nucleotide mutation in the GARS gene were reprogrammed into iPSCs using three plasmids (pCXLE-hSK, pCXLE-hUL and pCXLE-hOCT3/4-shp5-F). Then, CRISPR/Cas9 technology was used to repair the mutated gene sites at the iPSC level. RESULTS: An iPSC line derived from the GARS (G294R) family with fibular atrophy was successfully induced, and the mutated gene loci were repaired at the iPSC level using CRISPR/Cas9 technology. These findings lay the foundation for future research on drug screening and cell therapy. CONCLUSION: iPSCs can differentiate into different cell types, and originate from autologous cells. Therefore, they are promising for the development of autologous cell therapies for degenerative diseases. The combination of CRISPR/Cas9 and iPSCs may open a new avenue for the treatment of nervous diseases, such as CMT.
Asunto(s)
Enfermedad de Charcot-Marie-Tooth , Células Madre Pluripotentes Inducidas , Reparación del Gen Blanco , Humanos , Enfermedad de Charcot-Marie-Tooth/genética , Enfermedad de Charcot-Marie-Tooth/terapia , Enfermedad de Charcot-Marie-Tooth/metabolismo , Sistemas CRISPR-Cas/genética , Células Madre Pluripotentes Inducidas/metabolismo , Mutación , Reparación del Gen Blanco/métodosRESUMEN
BACKGROUND: Large area skin trauma has always been a great challenge for both patients and clinicians. Exosomes originating from human adipose-derived mesenchymal stem cells (hADSCs) have been a novel promising cell-free treatment in cutaneous damage repair. Nevertheless, the low retention rate of exosomes post-transplantation in vivo remains a significant challenge in clinical applications. Herein, we purposed to explore the potential clinical application roles of hADSCs-Exos encapsulated in functional PF-127 hydrogel in wound healing. METHODS: hADSCs-Exos were isolated from human hADSCs by ultracentrifugation. An injectable, biocompatible, and thermo-sensitive hydrogel Pluronic F-127 hydrogel was employed to encapsulate allogeneic hADSCs-Exos, and this complex was topically applied to a full-thickness cutaneous wound in mice. On different days post-transplantation, the mice were sacrificed, and the skin tissue was excised for histological and immunohistochemical analysis. RESULTS: Compared with hADSCs-Exos or PF-127 only, PF-127/hADSCs-Exos complexes enhanced skin wound healing, promoted re-epithelialization, increased expression of Ki67, α-SMA, and CD31, facilitated collagen synthesis (Collagen I, Collagen III), up-regulated expression of skin barrier proteins (KRT1, AQP3), and reduced inflammation (IL-6, TNF-α, CD68, CD206). By using PF-127/hADSCs-Exos complexes, hADSCs-Exos can be administrated at lower doses frequency while maintaining the same therapeutic effects. CONCLUSION: Administration of hADSCs-Exos in PF-127 improves the efficiency of exosome delivery, maintains the bioactivity of hADSCs-Exos, and optimizes the performance of hADSCs-Exos. Thus, this biomaterial-based exosome will be a promising treatment approach for the cutaneous rejuvenation of skin wounds.