Are chin and symphysis morphology facial type-dependent? A computed tomography-based study.

INTRODUCTION: The chin is a major determinant of the facial profile; hence, it plays a major role in orthodontics and orthognathic surgery. It is thus essential to follow and better understand its expression in different facial types. The major objectives of the current study were to characterize morphometrically the chin and symphysis and reveal their association with different facial types. METHODS: Computed tomography scans of the head and neck of 311 adults (163 males, 148 females; age range, 18-95 years) were classified into 3 facial types: short, average, and long. Height, width, projection, inclination, thickness, and area were measured on the chin and symphysis. RESULTS: The majority of the population (70%) manifested an average facial type; the other 30% were almost equally distributed between short and long facial types. The long facial type was more common among females and the short facial type among males. Chin projection, area, and size were significantly greater in short-faced patients. Chin width in males was similar for all facial types, whereas, in females, chin width was the widest in the short facial type and the narrowest in the long facial type. Symphysis height was significantly greater in long-faced patients in both sexes. The mandibular incisors' inclination relative to the mandibular plane was not significantly associated with the chin or symphysis morphology. CONCLUSIONS: Chin and symphysis morphology is facial type-dependent. Orthodontists and maxillofacial surgeons should be aware of the complex relationship between facial types and chin/symphysis size and shape when planning treatment.

Age estimation of fragmented human dental remains by secondary dentin virtual analysis.

Unlike bones, teeth are remarkably resilient and can withstand severe trauma, making age assessment based on the dentition essential for forensic analysis. Modern techniques for age estimation focus on pulp-chamber volume measurements using radiographs and computerized tomography (CT); however, these are applicable only for complete teeth (i.e., with intact crown and root). In the current study, we developed a new approach using high-resolution micro-computerized tomography (µCT) to visualize the secondary dentin (SD), an inner layer surrounding the pulp which accumulates with age, thus facilitating age estimation of fragmented and broken teeth.The growth pattern of the SD with age was analyzed for 77 lower premolars from two anthropological collections. A comparison of SD virtual segmentation and histological measurement was highly correlative (ICC = 0.95). SD was measured per volume (mm3) of a 1 mm thick slice directly below the cemento-enamel junction. Regression analysis using SD measurements increased the success rates of age estimation (82%) compared with the "gold-standard" pulp/dentin method (54%) in the range of ± 10 years. The accuracy of age estimation based on SD analysis was improved to a range of 7-8 years.The SD method thus allows age estimation with greater prediction rates and better accuracy based on only a small fragment of a tooth in a non-invasive manner. This novel methodology is easy to use, accessible, and bears implications in various fields such as forensic sciences and anthropological research.

Canine Transposition - Prevalence, Distribution and Treatment Considerations among Orthodontic Patients.

Tooth transposition is a relatively rare dental anomaly of interchange in position of two adjacent teeth. AIM: To determine the prevalence and distribution of canine transposition in a sample of orthodontic patients and present treatment alternatives and outcome. STUDY DESIGN: The records of 3000 consecutively treated orthodontic patients from a university clinic were surveyed to detect canine transposition in both dental arches. The data was recorded according to gender, age, number and location. RESULTS: Canine transpositions were detected in 15 subjects, 3 (20%) males and 12 (80%) females presenting a prevalence of 0.5%. Of them, 6 were between the maxillary canine and first premolar, 7 between the maxillary canine and lateral incisor, 2 transpositions were between the mandibular canine and the lateral incisor. A female to male ratio of 4:1 with left side predominance was found. Treatment options include extracting the transposed teeth, maintaining them in their transposed position, or repositioning them in their normal place within the dental arch. CONCLUSION: The prevalence of canine transposition in the present sample was found to be 0.5% with a greater frequency in the maxilla. Treatment options include extraction of one of the transposed teeth, alignment of the teeth in their transposed position or correction of the anomaly. The latter gives the best esthetic outcome.

Prevalence and Characteristics of Supernumerary Teeth in Israeli Orthodontic Patients.

BACKGROUND: Supernumerary teeth are one of the most common anomalies in the human dentition, found most frequently in the maxillary anterior region causing impaction or displacement of the adjacent permanent teeth. AIM: The purpose of this retrospective study was to determine the prevalence and characteristics of supernumerary teeth in orthodontically treated patients. STUDY DESIGN: Pre-treatment facial and intraoral photographs, study models, panoramic and periapical radiographs of 3,000 consecutively treated orthodontic patients (mean age 12.2 years) from the Department of Orthodontics Tel Aviv University, were examined to detect supernumerary teeth in both arches. They were recorded according to gender, age, number, location, position and morphology. RESULTS: Thirty-six patients, 22 (61%) males and 14 (39%) females with 50 supernumerary teeth, of which 42 (84%) were found in the maxillary anterior region, and 8 (16%) in the mandible, presenting a prevalence of 1.2%. CONCLUSIONS: A prevalence of 1.2% was found in our study. The most common supernumerary tooth is mesiodens located at the maxillary anterior region. The characteristics of supernumeraries were based on their morphology, location and position. The most frequent complications caused were rotations, displacement and arrested eruption of maxillary incisors.

Supernumerary Teeth in the Maxillary Anterior Region: The Dilemma of Early Versus Late Surgical Intervention.

Supernumerary teeth are the most common developmental dental anomalies in the maxillary anterior region causing interference to the developing permanent incisors resulting in poor dental and facial esthetics. Two different opinions regarding the timing for surgical removal of the supernumerary teeth are presented. In this case report, three brothers with supernumerary teeth in the maxillary anterior region are presented, their surgical and orthodontic management and outcome are discussed.

The use of Bjork's indications of growth for evaluation of extremes of skeletal morphology.

BACKROUND: Morphological indicators within the cranium for prediction of mandibular growth patterns as reported by Bjork are: (1) inclination of the condylar head (ICH), (2) curvature of mandibular canal (CMC), (3) shape of the lower border of the mandible and specifically depth of the antegonial notch (AN), (4) inclination of the symphysis (ISY), (5) interincisal angle (IIA), (6) intermolar angle (IMA), and (7) lower anterior face height (LAFH). The purpose of this study was to examine the association of these indicators as they relate to extreme skeletal patterns observed in skeletally mature subjects. MATERIALS: The pre-treatment lateral cephalometric radiographs of 395 post-growth subjects were randomly selected from the archives of a university orthodontic department. These were divided in three groups according to their MP-SN angle [normal: 28-36degrees (G1), hypodivergent: ≤26degrees (G2), hyperdivergent: ≥38degrees (G3)]. RESULTS: It was found that only LAFH was correlated to age across all groups. However, within G1, G2, and G3, and between genders, it was found that there were statistically significant differences for all indicators in relation to age, except IMA (P > 0.05). In addition, ISY and IMA had a predictive value lower than the chance level (0.5). CONCLUSION: Bjork's implant studies have contributed much to understanding facial-skeletal growth; however, this study suggests that their utilization as a tool in classifying extreme skeletal patterns requires careful evaluation of all the parameters involved.

Rate and pattern of interproximal dental attrition.

Although occlusal and interproximal attrition occur because of diverse etiology and present dissimilar features, both progress with age. The objectives of this study were to reveal the rate and pattern of development of interproximal attrition facets (PAF) with age and to compare those with occlusal attrition (OA) changes. Five-hundred and ninety-four teeth were collected from 198 skulls (of adults, 20-71 yr of age). Three mandibular teeth [first premolar (P1), second premolar (P2), and first molar (M1)] were examined for PAF size and OA rate. Interproximal attrition and OA followed similar patterns of development until subjects reached 40-45 yr of age, after which they took different paths: PAF did not increase in size and were not as large as in younger groups, regardless of facet location, whereas OA continued to progress. The PAF changes with age differed between premolars and molars, unlike OA, which presented a similar rate for all teeth studied. Although OA scores presented significantly moderate correlations with age, PAF area size demonstrated low correlations with age. Low, but significant, correlations were found between the rate of OA and that of PAF. However, PAF and OA exhibited different patterns of development with age. Premolars and molars presented dissimilar development of PAF, which is probably caused by a unique attrition pattern in the molar teeth, different morphology, and force vectors.

Pattern of maxillary and mandibular proximal enamel thickness at the contact area of the permanent dentition from first molar to first molar.

INTRODUCTION: Proximal enamel thickness (PET) at the mesial and distal contact areas of the complete permanent dentition has not been previously reported. Anatomic investigation of PET is essential for interproximal reduction treatment. Our objectives were to measure the PETs of the complete maxillary and mandibular dentitions at the contact areas, to compare the PETs of adjacent teeth, and to evaluate the vertical position of each contact area. METHODS: We evaluated 720 extracted teeth; of these, 109 intact teeth were selected. The mesial and distal contact areas were demarcated, and each tooth was embedded in transparent epoxy resin. Blocks were prepared so that the 2 demarcated contact areas were exposed, and 6 measurements were taken and statistically analyzed. RESULTS: Both jaws showed the same PET pattern characterized by 5 features: PET increased progressively from incisor (0.63 mm) to first molar (1.48 mm). Per tooth, mesial and distal PET did not differ. Total maxillary (26.86 mm) and mandibular (24.52 mm) PETs were similar. Paired PETs at the interproximal interface were similar, with the exception of the lateral incisor-canine interfaces. From incisor to first molar, the contact area becomes located farther gingivally. CONCLUSIONS: The existing guideline of maximal 0.5-mm interproximal reduction per 2 adjacent teeth should be kept in the anterior region and could be increased to 1 mm in the posterior region, when an equal amount is removed.

Long- and short-term effects of headgear traction with and without the maxillary second molars.

INTRODUCTION: A quantitative assessment of maxillary first molar distalization with and without the maxillary second molar (M2) was carried out. METHODS: Fifty-six cervical headgear patients undergoing fixed appliance orthodontic treatment were divided into 2 groups: before (G - M2) and after (G + M2) eruption of the maxillary second molars (ages, 11.87 ± 1.20, and 13.05 ± 1.55 years, respectively). The tightness of the dental contact point (TDCP) and the space between the second premolar and the maxillary first molar were measured at 6 levels of headgear force (0-15 N) at 3 intervals 6 months apart (T0, T1, T2). RESULTS: Relationships were found between space and TDCP, time, and presence or absence of the maxillary second molar at T1 and T2 (P <0.001). The TDCP decreased and space increased with increase in initial headgear force. An increase in initial force beyond 6 to 9 N did not significantly increase the initial maxillary first molar distalization. The G - M2 TDCP and space measurements were similar to those of G + M2 at T2 with the eruption of the maxillary second molar. From T0 to T1, maxillary first molar distalization was greater in G - M2. In comparison with our previous headgear-alone study, initial distalization with a fully bonded appliance was reduced by 4-fold. CONCLUSIONS: Headgear therapy is more effective before the eruption of the maxillary second molar. Once it erupts, the distalization pace of the maxillary first molar is reduced, but it can nevertheless be pursued at a slower pace when the maxillary second molar is present.

Integrative approach for supernumerary teeth: a single-center retrospective analysis.

OBJECTIVE: The study aims to provide a comprehensive case analysis from a single center, with the objective of clarifying the optimal timing and recommending a preferred treatment strategy customized to the specific presentation of each type of supernumerary tooth (SNT) identified in our research. METHODS AND MATERIAL: A retrospective study was conducted on patients who presented with SNT and were treated through an interdisciplinary at the clinic. RESULTS: 55 patients with 81 SNT of the permanent dentition were analyzed. They included 30 males and 25 females. The dentition status of the patients was as follows: 31 patients with mixed dentition, 0 patients with deciduous dentition, and 24 patients with permanent dentition. The diagnosis of SNT diagnosis was primarily made by general or pediatric dentists and/or orthodontists. Patients were then referred to maxillofacial surgeons for treatment decision. The timing of treatment was mainly determined by the oral surgeon, based on the recommendations of the other specialists involved. Cases involving mal-eruption or malalignment of permanent teeth required both surgical and orthodontic treatment. Patients over 9 years old were treated either under local anesthesia or sedation, while those under 9 years old were treated under deep sedation or general anesthesia A comprehensive investigation of cases involved the utilization of cone beam computerized tomography (CBCT) at the SNT site to facilitate treatment planning. There was a significant correlation between younger age and the preference for treatment under sedation or general anesthesia (p=0.01, t-test). Similarly, a strong association was found between younger age and the need for additional orthodontic treatment (p=0.016, t-test). Cases of surgical removal of SNT at a young age typically did not require orthodontic traction of the permanent tooth, in contrast to cases of late surgical intervention (patients over 11 years old), which often did necessitate such traction. There was a strong tendency for treating supernumerary teeth (SNT) in the maxilla. The proximity of SNTs to vital anatomical landmarks significantly influenced treatment decisions. Patients with SNTs near the mental foramen or the inferior dental canal in the premolar area were exclusively placed under follow-up care (p=0.002, Pearson's chi-square test). However, in the maxilla, the proximity of SNTs to vital structures such as the floor of the nose and the incisive nerve did not affect the treatment approach, and those supernumerary teeth were mostly removed. CONCLUSIONS: A team approach for managing supernumerary teeth (SNT) is recommended. The timing of treatment should carefully consider the advantages and disadvantages of early versus late intervention. Early surgical treatment in cases where eruption is disturbed might result in spontaneous eruption, eliminating the need for orthodontic traction of the permanent teeth.

The Impact of the COVID-19 Pandemic on Israeli Orthodontic Practice: A Clinic's Activity and Patients' Attitudes.

The current study aimed to characterize the activity in orthodontic clinics during the COVID-19-induced lockdown and the inter-lockdown periods, as well as to evaluate patients' perspectives with respect to their fears, their extent of cooperation with treatment, and their emergency needs during the lockdown. The data were gathered from 11 private orthodontic clinics from 1 January 2020 to 8 March 2021, which included three lockdowns and inter-lockdowns. Information specifying the number of admissions, missed appointments, and emergency visits was gathered. Four hundred and twenty-nine orthodontic patients treated in those clinics agreed to complete a questionnaire that evaluated their concerns and expectations, the treatment emergency issues, implementation of the orthodontist's instructions, and contact with the clinical staff during lockdowns. There was a significant increase in the number of scheduled appointments during the inter-lockdown periods, compared with the pre-pandemic period (p = 0.001). No difference in the number of missed/canceled or emergency appointments was found between the different periods (p > 0.420). The majority (89.6%) of the emergency visits involved issues with appliances; 68.7% of the subjects were advised to present themselves at clinics. During the peaks of the waves of the COVID-19 pandemic, a sharp rise in the number of missed and urgent appointments was not found. Reducing the number of orthodontic emergencies may assist in reducing patient fears.

Mandibular second molar impaction. Part I: Genetic traits and characteristics.

INTRODUCTION: Detection of mandibular second molar (MM2) impaction is imperative for orthodontic diagnosis and treatment. In this study, we examined a possible genetic trait in MM2 impaction in 2 populations and defined distinctive characteristics. METHODS: Initial panoramic radiographs of patients of Israeli (n = 3500) and Chinese-American (n = 3000) origin, aged 11 to 15 years, were examined. Twelve distinctive characteristics were compared between the unilateral impacted and the nonimpacted sides. RESULTS: A total of 120 subjects with MM2 impaction were found (1.8%). The Chinese-American population had a higher prevalence (n = 71, 2.3%) of MM2 impaction compared with the Israeli population (n = 49, 1.4%; P = 0.004). For the subjects with MM2 impaction, the Israelis had significantly (P = 0.039) fewer bilateral impactions (27%) than did the Chinese-Americans (45%). Mesially inclined impacted MM2s were more common (88% and 89%) in the Israeli and Chinese-American populations, respectively. The unilateral impacted side demonstrated reductions in the distance between the mandibular first molar and the ramus (P <0.001), the length of the mesial root of the MM2 (P <0.001), and the height between the MM2 and the mandibular third molar, and increases in the angulations of the MM2 (P <0.001) and the mandibular third molar (P <0.003). CONCLUSIONS: An autosomal genetic trait is present in MM2 impaction with greater penetrance in the Chinese-American population. Within developmental impediments, the deficient mesial root length of the MM2 is the primary impaction factor.

Three-Dimensional Surface Texture Analysis of Fluoride's Effect on Enamel Erosion.

Enamel erosion has become a common clinical finding that often impairs dental esthetics and function. In the current study, we aimed to implement the three-dimensional surface texture analysis (3DST) method to explore the protective effect of fluoride on surface texture prior to erosive conditions. For each of the 50 teeth used in this study, the polished buccal enamel surface was divided into three separate areas: the first area was untouched polished enamel, the two other surfaces were immersed in 0.3% citric acid for 30 s. One was treated with high-concentration (19,000 ppm) sodium fluoride (NaF) solution prior to acid attack, and the other had no treatment prior to acid exposure. Enamel surface texture and step height measurements were obtained using a high-resolution disk scanning confocal microscope, and SEM images were also acquired. Surfaces treated with fluoride showed fewer variations in 3-D surface texture parameters than the eroded surface compared to the control group (p = 0.001). This was in accordance with the SEM descriptive images. The findings indicate that pre-fluoridated enamel areas were less affected by the acid and showed similar features to the untouched enamel. Moreover, a protective effect of the fluoride treatment against irreversible enamel damage was noted as the surface loss (step-height) was significantly reduced (p = 0.03). The study showed that 3DST analysis is a valuable methodology for detecting and quantifying subtle differences between the surfaces. When exploring the combination of all surface texture parameters, it was revealed that the pre-fluoridated eroded enamel surfaces showed considerable similarity to the untouched enamel.

Secondary Dentin Formation Mechanism: The Effect of Attrition.

Human dentin consists of a primary layer produced during tooth formation in early childhood and a second layer which first forms upon tooth eruption and continues throughout life, termed secondary dentin (SD). The effect of attrition on SD formation was considered to be confined to the area subjacent to attrition facets. However, due to a lack of three-dimensional methodologies to demonstrate the structure of the SD, this association could not be determined. Therefore, in the current study, we aimed to explore the thickening pattern of the SD in relation to the amount of occlusal and interproximal attrition. A total of 30 premolars (50-60 years of age) with varying attrition rates were evaluated using micro-computerized tomography. The results revealed thickening of the SD below the cementoenamel junction (CEJ), mostly in the mesial and distal aspects of the root (p < 0.05). The pattern of thickening under the tooth cervix, rather than in proximity to attrition facets, was consistent regardless of the attrition level. The amount of SD thickening mildly correlated with occlusal attrition (r = 0.577, p < 0.05) and not with interproximal attrition. The thickening of the SD below the CEJ coincided with previous finite element models, suggesting that this area is mostly subjected to stress due to occlusal loadings. Therefore, we suggest that the SD formation might serve as a compensatory mechanism aimed to strengthen tooth structure against deflection caused by mechanical loading. Our study suggests that occlusal forces may play a significant role in SD formation.

The Prevalence of Temporomandibular Disorders and Dental Attrition Levels in Patients with Posterior Crossbite and/or Deep Bite: A Preliminary Prospective Study.

Background: The prevalence of various temporomandibular disorders (TMD) and the severity of attrition in patients with either bilateral or unilateral deep bite and/or posterior crossbite has not been established, nor has the effect of one year of orthodontic treatment on TMD. Methods: Of 310 patients presenting with suspected TMD, 160 were diagnosed with various TMD and 150 were TMD-free. Diagnosis was according to the Axis I of the Diagnostic Criteria for TMD. All participants underwent a dental examination, and 100 patients were reevaluated after one year of orthodontic treatment. Fisher's exact test and the proportion test with Bonferroni's correction were used for the categorical univariate analysis. Results: There was a significant association (P < 0.001) between deep bite and dental attrition (wear), but not between crossbite and/or deep bite in patients diagnosed with either painful TMD or disc displacement. The risk of sustaining painful TMD when crossbite presented simultaneously on the anterior and the posterior dentition was 2.625-fold greater than when it presented with a normal bite, although this difference was not significant (P=0.286) due to the lack of statistical power. There was no significant sex-related association between the occurrence of either painful TMD or disc displacement. A reduction in TMD findings was demonstrated after one year of treatment, but no statistical power was reached due to the small sample size. Conclusions: Deep bite may be related to dental wear but not to pain from TMD and/or disc displacement. Only crossbite that presents simultaneously on the anterior and the posterior dentition (mixed X-bite) may have some effect on the level of pain in TMD, but not on in the prevalence of disc displacement. Confirmation of these conclusions by well-designed studies on larger patient groups is warranted. There was a clinically significant improvement in TMD findings after one year of treatment.

The prevalence of posterior crossbite, deep bite, and sleep or awake bruxism in temporomandibular disorder (TMD) patients compared to a non-TMD population: A retrospective study.

Objective: To assess the prevalence of posterior crossbite and/or deep bite among patients diagnosed with temporomandibular disorders (TMD) compared to a non-TMD population.Methods: Four hundred ninety-four patients were enrolled: 345 with TMD according to the diagnostic criteria for TMD and 149 without TMD (control group). The chi-square test was used for statistical analysis.Results: A statistically significant association was found between sleep and awake bruxism and painful TMDs (p < .001 for both), but not with disc displacement. There was no association between posterior crossbite and/or deep bite with either painful TMD or disc displacement.Conclusion: Within the study limitations, sleep bruxism and awake bruxism may be related to pain in the TMD, and the severity of a deep overbite and presence of a unilateral or bilateral posterior crossbite should not be considered risk factors or as having any effect on the pain associated with TMD and/or disc displacement.

Association between posterior crossbite and/or deep bite and temporomandibular disorders among Palestinian adolescents: A sex comparison.

Objective: To assess the prevalence of temporomandibular disorders (TMDs) and posterior crossbite and/or deep bite and any possible association between them. Methods: One thousand-nineteen adolescents responded to a questionnaire regarding oral habits and TMD symptoms. Afterwards, they were diagnosed according to the Axis I of the DC/TMD and underwent a dental examination. The chi-square test was used for statistical analysis. Results: A significant association  was found between posterior crossbite and some TMD diagnosis, but no association was found between deep bite and TMD, nor between occlusal diagnosis and bruxism. TMDs were more prevalent in girls. There was a significant sex difference (more among females) in the prevalence of painful TMDs. Conclusion: Posterior crossbite in the adolescent population analyzed may be related to TMDs, in contrary to deep-bite. The presence of posterior crossbite may have different impact on TMD findings between the sexes.

Dental Anomalies' Characteristics.

The aim of this study was to characterize dental anomalies. The pretreatment records (photographs and radiographs) of 2897 patients (41.4% males and 58.6% females) were utilized to detect dental anomalies. The dental anomalies studied were related to number, size and shape, position, and eruption. A Chi-square test was carried out to detect associations between dental anomalies, jaw, and sex. A total of 1041 (36%) of the subjects manifested at least one dental anomaly. The prevalence of all dental anomalies was jaw-dependent and greater in the maxilla, except for submerged and transmigrated teeth. The most frequently missing teeth were the maxillary lateral incisor (62.3%) and the mandibular second premolars (60.6%). The most frequent supernumerary teeth were the incisors in the maxilla (97%) and the first premolars in the mandible (43%). Dental anomalies are more frequent in the maxilla and mainly involve the anterior teeth; in the mandible, however, it is the posterior teeth. These differences can be attributed to the evolutionary history of the jaws and their diverse development patterns.

Variation in Chin and Mandibular Symphysis Size and Shape in Males and Females: A CT-Based Study.

The chin is a unique anatomical landmark of modern humans. Its size and shape play an important role from the esthetic perspective. However, disagreement exists in the dental and anthropological literature regarding the sex differences in chin and symphysis morphometrics. The "sexual selection" theory is presented as a possible reason for chin formation in our species; however, many other contradictory theories also exist. This study's aims were therefore to determine how chin and symphysis size and shape vary with sex, and to discuss "sexual selection" theory as a reason for its formation. Head and neck computed tomography (CT) scans of 419 adults were utilized to measure chin and symphysis sizes and shapes. The chin and symphysis measures were compared between the sexes using an independent-samples t-test, a Mann-Whitney test, and the F-statistic. The chin width was significantly greater in males than in females (p < 0.001), whereas the chin height, area, and size index were significantly greater in females (p < 0.001). Symphysis measures did not differ significantly between the sexes. Size accounted for 2-14% of the chin variance and between 24-33% of the symphysis variance. Overall, the chin was found to be a more heterogeneous anatomical structure than the symphysis, as well as more sexually dimorphic.

Upper Lip Horizontal Line: Characteristics of a Dynamic Facial Line.

Background: Upper lip appearance received major attention with the introduction of diverse treatment modalities, including lip augmentation, rhinoplasty surgery, and dental treatment designed to support the upper lip. Our objectives were to define the prevalence and characteristics of the upper lip horizontal line (ULHL), which is a dynamic line appearing during a smile, in relation to gender, malocclusions, aging, and facial morphology. Methods: First, the prevalence and gender distribution of ULHL was examined from standardized en-face imaging at full smile of 643 randomly selected patients. Second, cephalometric and dental cast model analyses were made for 97 consecutive patients divided into three age groups. Results: ULHL appears in 13.8% of the population examined, and prevailed significantly more in females (78%). The prevalence of ULHL was not related to age nor to malocclusion. Patients presenting ULHL showed shorter upper lip and deeper lip sulcus. The skeletal pattern showed longer mid-face, shorter lower facial height and greater prevalence of a gummy smile. Conclusions: Female patients with short upper lip, concavity of the upper lip, and gummy smile are more likely to exhibit ULHL. The ULHL is not age-related and can be identified in children and young adults. Therefore, it should be considered when selecting diverse treatment modalities involving the upper lip.