Combination of PD-1 inhibitor with GVD (gemcitabine, vinorelbine, liposomal doxorubicin) versus GVD regimen as second-line therapy for relapsed/refractory classical Hodgkin lymphoma.

Patients with classical Hodgkin lymphoma (cHL) who do not achieve complete remission (CR) after second-line chemotherapy have poor clinical outcomes. Besides, conventional salvage chemotherapy regimens have an unsatisfactory CR rate. The present retrospective study reports the efficacy and toxicity of the GVD (gemcitabine, vinorelbine, liposomal doxorubicin) regimen with or without programmed cell death 1 (PD-1) inhibitor for patients with cHL who failed first-line treatment. A total of 103 patients with cHL (GVD+PD-1 group, n = 27; GVD group, n = 76) with response assessment based on positron emission tomography were included. The GVD+PD-1 group tended to have a higher CR rate than GVD group (85·2% vs. 65·8%, P = 0·057) and had a better event-free survival (EFS) (P = 0·034). Subgroup analysis showed that patients with low-risk second-line International Prognostic Score might benefit from the addition of PD-1 inhibitor (GVD+PD-1 vs. GVD, 100·0% vs. 64·7%, P = 0·028) and had better EFS than GVD alone (P = 0·016). Further analysis demonstrated that PD-1 consolidation therapy might provide an EFS benefit (P = 0·007). The toxicity of the GVD+PD-1 regimen was comparable to the GVD regimen, except for higher rates of hypothyroidism and autoimmune pneumonitis, which were manageable. In conclusion, combining a PD-1 inhibitor with a GVD regimen could be a potentially effective second-line therapy for patients with cHL.

Amphiphilic Polymer Ligand-Assisted Synthesis of Highly Luminescent and Stable Perovskite Nanocrystals for Sweat Fluorescent Sensing.

The weak interfacial binding affinities of the inorganic perovskite core with ligands and high density of surface defect states induce the facile detachment of surface ligands from nanocrystals (NCs), resulting in their poor colloidal stability and fluorescence in aqueous. In this work, a powerful ligand engineering strategy was proposed for eliminating the surface defects and aggregation of the NCs. Using an amphiphilic polymer octylamine-modified polyacrylic acid (OPA) as a capping ligand, the as-synthesized CsPbBr3 NCs retain high photoluminescence intensity and stability by the modified ligand-assisted reprecipitation method. The increase in the fluorescence lifetime and NC size could also be observed, and how the NC particle size influences fluorescence lifetime was further studied. In addition, the water stability, photostability, and thermal stability were significantly improved, and the fluorescence of NCs can maintain 80.13% of the original value in water for 15 d. We further validated that the strong binding affinity of OPA and oleylamine ligands with CsPbBr3 NCs leads to a reduction in surface trap states, and a large amount of carboxyl groups of the OPA made the NCs preserve good water solubility. In addition, the OPA has the ability of adjusting the particle size of NCs. Furthermore, a wavelength-shifted colorimetric sensor based on these NCs was constructed for detection of Cl- in sweat, which enables the rapid and visual detection of Cl- with high accuracy and stability. Overall, these CsPbBr3 NCs synthesized by the ligand engineering strategy validated their wide applications in biomedical sensing fields.

A highly flexible Ni-Co MOF nanosheet coated Au/PDMS film based wearable electrochemical sensor for continuous human sweat glucose monitoring.

The development of flexible substrate materials and nanomaterials with high electrochemical performance is of great significance for constructing efficient wearable electrochemical sensors for real-time health monitoring. Herein, a wearable electrochemical sweat sensor based on a Ni-Co MOF nanosheet coated Au/polydimethylsiloxane (PDMS) film was prepared for continuous monitoring of the glucose level in sweat with high sensitivity. First, a stretchable Au/PDMS film based three-electrode system was prepared by chemical deposition of a gold layer on the hydrophilic treated PDMS. Then, Ni-Co MOF nanosheets with high electrocatalytic activity were synthesized by a facile solvothermal method and modified on the Au/PDMS electrode. The electrocatalytic activity of the Ni-Co MOF nanosheets synthesized under different Ni : Co ratios was investigated. The Ni-Co MOF/Au/PDMS (NCAP) film electrode showed excellent electrochemical performance for glucose detection with a wide linear range of 20 µM to 790 µM and a high sensitivity of 205.1 µA mM-1 cm-2. In addition, the flexible sensor shows high stability and a good electrochemical response to glucose when stretched and bent to different levels. Moreover, it maintained long-term stability and high selectivity for glucose monitoring. Lastly, a sweat-absorbent cloth was used to cover the working area of the sensor and was fixed with a needle and thread to form a wearable sweat glucose sensor. The sensor can be attached to the skin for stable, accurate and continuous monitoring of glucose levels in human sweat for one day. This work validates the potential of our high-performance wearable sensor for out-of-clinic health monitoring.

Polymer surface ligand and silica coating induced highly stable perovskite nanocrystals with enhanced aqueous fluorescence for efficient Hg2+ and glutathione detection.

The poor stability and aqueous-quenching of fluorescence of perovskite nanocrystals (NCs) hinder their application in bio-detection and bio-imaging. Herein, through the synergistic effects of polymer surface ligand and silica encapsulation, highly stable and enhanced aqueous fluorescent CsPbBr3-mPEG@SiO2 NCs were synthesized and used as a novel "on-off-on" fluorescent probe for highly sensitive and selective detection of mercury ions (Hg2+) and glutathione (GSH) in aqueous solutions. The effects of the methoxypolyethylene glycol amine (mPEG-NH2) ligand and silica encapsulation on the stability and aqueous fluorescence of the CsPbBr3 NCs were studied. It indicated that the aqueous fluorescence of perovskite NCs was increased by 2.59 times. The water stability was also greatly improved, with the NCs maintaining 73% of their original fluorescence after storage for 30 days in water. X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR) analyses further demonstrated that the NCs were successfully passivated by mPEG-NH2 and silica. The fluorescence of the CsPbBr3-mPEG@SiO2 nanocrystals was effectively quenched by Hg2+ which is attributed to the electron transfer process between NCs and Hg2+. Then, through the interaction between Hg2+ and GSH, the restoration of fluorescence for CsPbBr3-mPEG@SiO2 was realized. The "on-off-on" fluorescent probe can be used for the detection of Hg2+ and GSH with a low detection limit of 0.08 nM and 0.19 µM, respectively. It also shows a fast response time and high accuracy for practical sample detection. The simple and sensitive fluorescent probe of CsPbBr3-mPEG@SiO2 shows great potential in environmental and biological sensing.

New ingol-type diterpenes from the latex of Euphorbia resinifera.

Two new ingol-type diterpenes, euphoresins A-B (1-2), have been isolated from the methanol extract of Euphorbium, the latex of Euphorbia resinifera Berg. Their structures were established on the basis of extensive analyses of their HR-ESI-MS, IR, UV, 1D, and 2D NMR spectra. The absolute configurations were confirmed by Mosher's method and circular dichroism (CD) analyses. The two compounds were tested for their cytotoxic activities against MCF-7, U937, and C6 cancer cell lines, but they both exhibited little cytotoxic effect.

[Triterpenoids from Uygur medicine latex of Euphorbia resinifera].

Ten triterpenes compounds were isolated from the methanol extraction of the latex of Euphorbia resinifera by means of various chromatographic methods such as silica gel, ODS and semi-preparative HPLC, Their structures were identified by spectroscopic methods and physicochemical properties. These isolated compounds were identified as 3ß-hydroxy-25,26,27-trinor eupha-8-ene-24-oate (1), iso-maticadienediol (2), 25,26,27-trinorTirucall-8-ene-3ß-ol-4-acid (3), dammarendiol Ⅱ (4), eupha-8,24-diene-3-ol-26-al (5), lnonotusane C (6), eupha-8,24-diene-3ß-ol-7,11-dione (7), inoterpene A (8), inoterpene B (9), and eupha-24-methylene-8-ene-3ß-ol-7,11-dione (10). Among them, compound 1 was a new natural product, compounds 2-4 were firstly isolated from the Euphorbiaceae and compounds 5 and 6 were isolated from the genus Euphorbia for the first time. The cytotoxicity of the compounds 1-10 against MCF-7, U937 and C6 cancer cell lines was evaluated, but none of the compounds was active.

Topologically Controlled Cell Differentiation Based on Vapor-Deposited Polymer Coatings.

In addition to the widely adopted method of controlling cell attachment for cell patterning, pattern formation via cell proliferation and differentiation is demonstrated using precisely defined interface chemistry and spatial topology. The interface platform is created using a maleimide-functionalized parylene coating (maleimide-PPX) that provides two routes for controlled conjugation accessibility, including the maleimide-thiol coupling reaction and the thiol-ene click reaction, with a high reaction specificity under mild conditions. The coating technology is a prime tool for the immobilization of sensitive molecules, such as growth factor proteins. Conjugation of fibroblast growth factor 2 (FGF-2) and bone morphogenetic protein (BMP-2) was performed on the coating surface by elegantly manipulating the reaction routes, and confining the conjugation reaction to selected areas was accomplished using microcontact printing (µCP) and/or UV irradiation photopatterning. The modified interface provides chemically and topologically defined signals that are recognized by cultured murine preosteoblast cells for proliferation (by FGF-2) and osteogenesis (by BMP-2) activities in specific locations. The reported technique additionally enabled synergistic pattern formation for both osteogenesis and proliferation activities on the same interface, which is difficult to perform using conventional cell attachment patterns. Because of the versatility of the coating, which can be applied to a wide range of materials and on curved and complex devices, the proposed technology is extendable to other prospective biomaterial designs and material interface modifications.

Wearable electrochemical sensor based on bimetallic MOF coated CNT/PDMS film electrode via a dual-stamping method for real-time sweat glucose analysis.

Non-invasive wearable sweat glucose sensors are expected to be highly desirable for personalized diabetes management. Therefore, developing facile, convenient, and scalable manufacturing method of such wearable sensors is urgently needed. Herein, we report a simple and low-cost stamping-vacuum filtration dry transfer (SVFDT) method for construction of a wearable sweat glucose electrochemical sensor. In this patch, a three-electrode array template was made by using a polyvinyl chloride (PVC) stamp, followed by the preparation of multiwalled carbon nanotubes (MWCNTs)/polydimethylsiloxane (PDMS) (MP) film electrode using the vacuum-filtration dry transfer method. In addition, for further enhancing the conductivity of the electrode, another similar stamp with a raised surface dipping carbon nanotubes (CNTs) conductive coating was stamped on the surface of the MP electrode to obtain CNTs/MWCNTs/PDMS (CMP) electrode. CMP electrode was modified with the enzyme-like Ni-Co metal-organic framework (MOF) material which showed good electro-catalytic activity and achieved high sensitivity for glucose detection with a low detection limit of 6.78 µM and a wide linear range of 20 µM - 1.1 mM. More importantly, the Ni-Co MOF modified CMP (NCMP) electrode also displayed high stability under stretching and bending conditions. Finally, the sweat absorbent cloth was combined with the NCMP film electrode to form a wearable flexible electrochemical sensor patch, which could adhere to the skin to enrich sweat and realize real-time detection of sweat glucose with high accuracy. This SVFDT method can also be applied to the fabrication of other electronic devices.

A wearable sweat electrochemical aptasensor based on the Ni-Co MOF nanosheet-decorated CNTs/PU film for monitoring of stress biomarker.

Monitoring cortisol, a hormone released by the adrenal cortex in response to stress, is essential to evaluate the endocrine response to stress stimuli. While the current cortisol sensing methods require large laboratory settings, complex assay, and professional personnel. Herein, a novel flexible and wearable electrochemical aptasensor based on a Ni-Co metal-organic frameworks (MOF) nanosheet-decorated carbon nanotubes (CNTs)/polyurethane (PU) film is developed for rapid and reliable detection of cortisol in sweat. First, the CNTs/PU (CP) film was prepared by a modified wet spinning technology, and the CNTs/polyvinyl alcohol (PVA) solution was thermally deposited on the surface of CP film to form the highly flexible CNTs/PVA/CP (CCP) film with excellent conductivity. Then aminated Ni-Co MOF nanosheet prepared by a facile solvothermal method was conjugated with streptavidin and modified on the CCP film. Biofunctional MOF can effectively capture cortisol aptamer due to its excellent specific surface area. In addition, the MOF with peroxidase activity can catalytic oxidization of hydroquinone (HQ) by hydrogen peroxide (H2O2), which could amplify the peak current signal. The catalytic activity of Ni-Co MOF was substantially suppressed in the HQ/H2O2 system due to the formation of the aptamer-cortisol complex, which reduced the current signal, thereby realizing highly sensitive and selective detection of cortisol. The sensor has a linear range of 0.1-100 ng/mL and a detection limit of 0.032 ng/mL. Meanwhile, the sensor showed high accuracy for cortisol detection under mechanical deformation conditions. More importantly, the prepared MOF/CCP film based three-electrode was assembled with the polydimethylsiloxane (PDMS) substrate, and the sweat-cloth was used as the sweat collection channel to fabricate a wearable sensor patch for monitoring of cortisol in volunteers' sweat in the morning and evening. This flexible and non-invasive sweat cortisol aptasensor shows great potential for quantitative stress monitoring and management.

A highly-specific photoelectrochemical platform based on carbon nanodots and polymers functionalized organic-inorganic perovskite for cholesterol sensing.

Herein, we reported the introduction of carbon nanodots (CNDs) and polyvinylidene fluoride (PVDF) as additives into perovskite CH3NH3PbI3 through in situ synthesis to prepare PVDF-CH3NH3PbI3@CNDs composite, which demonstrated improved water tolerance and mechanical stability. The application of PVDF-CH3NH3PbI3@CNDs for photoelectrochemical sensing was then explored. A molecularly imprinted polymer (MIP) that could specifically recognize cholesterol (CHO) was anchored to PVDF-CH3NH3PbI3@CNDs via a simple thermal polymerization process, followed by elution with hexane. A label-free and sensitive photoelectrochemical method for CHO detection was achieved by using the MIPs@PVDF-CH3NH3PbI3@CNDs platform. The detection limit for CHO was 2.1 × 10-14 mol/L, lower than most of the existing CHO detection methods. In our perception, this platform can be extended to numerous other analytes. This research result may provide a new understanding to improve the performance and broaden the application range of organic-inorganic perovskites.

Engineering Antifouling and Antibacterial Stainless Steel for Orthodontic Appliances through Layer-by-Layer Deposition of Nanocomposite Coatings.

In this study, a nanocomposite coating composed of polydopamine, functionalized poly(3,4-ethylenedioxythiophene) (PEDOT), and silver nanoparticles (AgNPs) was synthesized through layer-by-layer deposition. Biomimitic polydopamine and hydroxyl-functionalized PEDOT were used to enhance the adhesion strength. The deposition of PEDOT functionalized with zwitterionic phosphorylcholine can contribute to the antifouling property. After immersion in the AgNO3 solution, Ag+ ions were adsorbed on PEDOT films and further reduced to form AgNPs spontaneously, which conferred antibacterial properties on these nanocomposite films. Escherichia coli and Streptococcus mutans were chosen to represent two common Gram-negative and Gram-positive oral pathogens. We further conducted inductively coupled plasma mass spectrometry to confirm that the Ag+ ions released from these nanocomposite films did not exert adverse effects on the human body. These results suggested that, when applied to stainless steel orthodontic appliances, these durable antifouling and antibacterial coatings may be useful for avoiding bacterial infection.

Styrene trimer may increase thyroid hormone levels via down-regulation of the aryl hydrocarbon receptor (AhR) target gene UDP-glucuronosyltransferase.

BACKGROUND: Styrene trimers (STs) are polystyrene-container-eluted materials that are sometimes detected in packaged foods. Although the possible endocrine-disrupting effects of STs, such as estrogenic activities, have been reported, their potential thyroid toxicity, such as that caused by the related endocrine disruptor 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), has not been studied in detail. OBJECTIVE: Using wild-type and aryl hydrocarbon receptor (Ahr)-null mice, we investigated whether 2,4,6-triphenyl-1-hexene (ST-1), an isomer of STs, influences thyroxin (T(4)) levels in the same manner as TCDD, which induces UDP-glucuronosyltransferase (UGT) via the AhR, resulting in a decrease in T(4) levels in the plasma of mice. METHODS: Both wild-type and Ahr-null mice (five mice per group) were treated for 4 days by gavage with ST-1 (0, 32, or 64 micromol/kg). RESULTS: High-dose (64 micromol/kg) ST-1 decreased the expression of AhR, cytochrome P450 (CYP) 1A1/2, UGT1A1/A6, and CYP2B10 mRNAs and the enzyme activity for CYP1A and UGT1A only in the wild-type mice. This dose decreased AhR DNA binding, but paradoxically increased AhR translocation to the nucleus. In contrast, a high dose of ST-1 increased T(4) levels in the plasma in wild-type mice but did not influence T(4) levels in AhR-null mice. CONCLUSIONS: Although ST-1 treatment might cause an increase in AhR levels in the nucleus by inhibiting AhR export, this chemical down-regulated AhR mRNA, thus leading to down-regulation of AhR target genes and an increase in plasma T(4) levels.

Artificial Neural Networking Model for the Prediction of Early Occlusion of Bilateral Plastic Stent Placement for Inoperable Hilar Cholangiocarcinoma.

BACKGROUND: This study aimed to determine whether the back-propagation artificial neural network (BP-ANN) model could be constructed to accurately in predicting early occlusion of bilateral plastic stent placement for inoperable hilar cholangiocarcinoma (HCA). METHODS: A total of 288 patients from the An Hui provincial Hospital were randomly divided into the training cohort (80%) and the internal testing cohort (20%). The predictive accuracy of the BP-ANN for predicting early occlusion of bilateral plastic stent placement of inoperable HCA was measured by the area under the curve (AUC) on receiver operating characteristic (ROC) curve analysis. The results were compared with those obtained using the conventional multivariate logistic regression analysis. RESULTS: Multivariate analysis revealed that cancer stage (P=0.005) and Bismuth stage (P=0.003) were independently and significantly associated with early stent occlusion. In the training cohort, BP-ANN had larger AUC than the multivariate logistic regression model (P=0.00049). In the internal testing cohort, the AUC of the BP-ANN had larger AUC than the multivariate logistic regression model (P=0.02142). CONCLUSIONS: This study showed that the BP-ANN model is a good predictive tool. It performed better than the conventional and commonly used statistical model in predicting early occlusion of bilateral plastic stent placement for inoperable HCA.

Vapor-based coatings for antibacterial and osteogenic functionalization and the immunological compatibility.

The immobilization of biofunctional molecules to biomaterial surfaces has enabled and expanded the versatility of currently available biomaterials to a wider range of applications. In addition, immobilized biomolecules offer modified surfaces that allow the use of smaller amounts of potentially harmful substances or prevent overdose, while the exhibited biological functions remain persistently effective. Surface concentrations of chlorhexidine (CHX) (1.40±0.08×10(-9)mol·cm(-2)) and bone morphogenetic protein 2 (BMP-2) (1.51±0.08×10(-11)mol·cm(-2)) immobilized molecules were determined in this study, and their specific biological functions in terms of antibacterial activity and osteogenesis potency, respectively, were demonstrated to be unambiguously effective. Immobilization exploits the use of vapor-based poly-p-xylylenes, which exhibit excellent biocompatibility and wide applicability for various substrate materials. This technique represents a practical and economical approach for the manufacture of certain industrial products. Furthermore, a minimal degree of macrophage activation was indicated on the modified surfaces via insignificant morphological changes and low levels of adverse inflammatory signals, including suppressed production of the pro-inflammatory cytokines IL-1ß and TNF-α as well as nitric oxide (NO). The results and the modification strategy illustrate a concept for designing prospective biomaterial surfaces such that the manipulation employed to elicit targeted biological responses does not compromise immunological compatibility.

Quantitative Detection of the Foot-And-Mouth Disease Virus Serotype O 146S Antigen for Vaccine Production Using a Double-Antibody Sandwich ELISA and Nonlinear Standard Curves.

The efficacy of an inactivated foot-and-mouth disease (FMD) vaccine is mainly dependent on the integrity of the foot-and-mouth disease virus (FMDV) particles. At present, the standard method to quantify the active component, the 146S antigen, of FMD vaccines is sucrose density gradient (SDG) analysis. However, this method is highly operator dependent and difficult to automate. In contrast, the enzyme-linked immunosorbent assay (ELISA) is a time-saving technique that provides greater simplicity and sensitivity. To establish a valid method to detect and quantify the 146S antigen of a serotype O FMD vaccine, a double-antibody sandwich (DAS) ELISA was compared with an SDG analysis. The DAS ELISA was highly correlated with the SDG method (R2 = 0.9215, P<0.01). In contrast to the SDG method, the DAS ELISA was rapid, robust, repeatable and highly sensitive, with a minimum quantification limit of 0.06 µg/mL. This method can be used to determine the effective antigen yields in inactivated vaccines and thus represents an alternative for assessing the potency of FMD vaccines in vitro. But it still needs to be prospectively validated by analyzing a new vaccine preparation and determining the proper protective dose followed by an in vivo vaccination-challenge study to confirm the ELISA findings.

Anti-hepatocarcinoma effects of 5-fluorouracil encapsulated by galactosylceramide liposomes in vivo and in vitro.

AIM: To study the anti-hepatocarcinoma effects of 5-fluorouracil (5-Fu) encapsulated by galactosylceramide liposomes (5-Fu-GCL) in vivo and in vitro. METHODS: Tumor-bearing animal model and HepA cell line were respectively adopted to evaluate the anti-tumor effects of 5-Fu-GCL in vivo and in vitro. Tumor cell growth inhibition effects of 5-Fu-GCL in vitro were assessed by cell viability assay and MTT assay. In vivo experiment, the inhibitory effects on tumor growth were evaluated by tumor inhibition rate and animal survival days. High performance liquid chromatography was used to detect the concentration-time course of 5-Fu-GCL in intracellular fluid in vitro and the distribution of 5-Fu-GCL in liver tumor tissues in vivo. Apoptosis and cell cycle of tumor cells were demonstrated by flow cytometry. RESULTS: In vitro experiment, 5-Fu-GCL (6.25-100 micromol/L) and free 5-Fu significantly inhibited HepA cell growth. Furthermore, IC50 of 5-Fu-GCL (34.5 micromol/L) was lower than that of free 5-Fu (51.2 micromol/L). In vivo experiment, 5-Fu-GCL (20, 40, 80 mg/kg) significantly suppressed the tumor growth in HepA bearing mice model. Compared with free 5-Fu, the area under curve of 5-Fu-GCL in intracellular fluid increased 2.6 times. Similarly, the distribution of 5-Fu-GCL in liver tumor tissues was significantly higher than that of free 5-Fu. After being treated with 5-Fu-GCL, the apoptotic rate and the proportion of HepA cells in the S phase increased, while the proportion in the G0/G1 and G2/M phases decreased. CONCLUSION: 5-Fu-GCL appears to have anti-hepato-carcinoma effects and its drug action is better than free 5-Fu. Its mechanism is partly related to increased drug concentrations in intracellular fluid and liver tumor tissues, enhanced tumor cell apoptotic rate and arrest of cell cycle in S phase.

Osteogenic Surface Modification Based on Functionalized Poly-P-Xylylene Coating.

The biotechnology to immobilize biomolecules on material surfaces has been developed vigorously due to its high potentials in medical applications. In this study, a simple and effective method was designed to immobilize biomolecules via amine-N-hydroxysuccinimide (NHS) ester conjugation reaction using functionalized poly-p-xylylene coating on material surfaces. The NHS ester functionalized coating is synthesized via chemical vapor deposition, a facile and solvent-less method, creating a surface which is ready to perform a one-step conjugation reaction. Bone morphogenetic protein 2 (BMP-2) is immobilized onto material surfaces by this coating method, forming an osteogenic environment. The immobilization process is controlled at a low temperature which does not damage proteins. This modified surface induces differentiation of preosteoblast into osteoblast, manifested by alkaline phosphatase (ALP) activity assay, Alizarin Red S (ARS) staining and the expression of osteogenic gene markers, Alpl and Bglap3. With this coating technology, immobilization of growth factors onto material surface can be achieved more simply and more effectively.

Tunable coverage of immobilized biomolecules for biofunctional interface design.

The controlled coverage of immobilized biomolecules is introduced, illustrating a concept for designing biomaterial surfaces such that the extent of manipulation employed to elicit biological responses is controlled according to density changes in the underlying chemical motifs and the density of immobilized biomolecules.

A series of Ti(IV)/Ti(III) coordination polymers: structures and surface photoelectric properties.

Three titanium coordination polymers, {[Ti(SO(4))(2)(H(2)O)]·0.5bipy·2H(2)O}(n)1, {[Ti1(SO(4))(2)(H(2)O)]·[Ti2(SO(4))(2)(H(2)O)]·bipy·5H(2)O}(n)2 and [Ti(tea)](n)3 (bipy=4,4'-bipyridine, H(3)tea=triethanolamine) were synthesized and characterized by IR, UV-Vis absorption spectra, TG analysis, X-ray single crystal diffraction and surface photovoltage spectroscopy (SPS). The surface photoelectric properties of titanium coordination polymers were discussed emphatically by the SPS. The results of single crystal diffraction indicate that polymers 1 and 2 possess 1D infinite structure bridged by SO(4)(2-) groups and coordinated water molecules and further connected into supramolecular structures by hydrogen bonds. Polymer 3 possesses 2D infinite structure bridged by weak sub-coordinated Ti-O bonds. The results of SPS show that there are obvious photovoltage responses in the range of 300-500 nm, which indicates that they possess photoelectric conversion ability. The SPS of three titanium polymers were analyzed comparatively. It is found that the valence of central metal ions, coordination micro-environment and kinds of coordination atoms influence the results of the SPS. The SPS is associated with UV-Vis absorption spectra.

[Effects of the traditional Chinese drug Dipsacus asperoides on the reconstruction of paradentium during the orthodontic tooth movement in rats].

PURPOSE: To observe the effects of the traditional Chinese drug Dipsacus asperoides on the construction of paradentium as well as the mechanism of action to osteoclast during the orthodontic tooth movement in rats. METHODS: Forty-eight female 8-week-old SPF Wistar rats were selected. They were randomly divided into 2 groups: Dipsacus asperoides group and control group. Then animal model for orthodontic tooth movement was established. 3 mL of NS was drenched to the control group and the Dipsacus asperoides group was given 6 g/kg per day Dipsacus asperoides decoction. The rats were executed in batch on the 7th, 14th, 21st, 28th day during the orthodontic treatment. The distances of the tooth movement were measured and slices from the periodontium of the maxillary first molar were observed under optical microscope. Measurement data were compared with t test and analysis of variance by PASW statistics18. RESULTS: The movement distance of the first molar was significantly larger in the Dipsacus asperoides group than that in the control group. The amount of osteoclast in Dipsacus asperoides group increased significantly compared with that in the control group (P<0.05). CONCLUSIONS: Dipsacus asperoides decoction is useful for the proliferation and differentiation of the osteoclast in orthodontic tooth movement. Supported by Shandong Provincial Science and Technology Development Project (Grant No.2008GG2NS02013) and Natural Science Foundation of Shandong Province (Grant No.Q2008C12).