Antimicrobial Activity in Chitosan-Treated Prosthetic Materials: A Systematic Review.

OBJECTIVE: The antimicrobial effect of prosthetic materials treated with chitosan was systematically reviewed. METHODS: The searches were carried out on PubMed/Medline, Scopus, ISI Web of Science, LILACS, Embase, and Open Grey with searches performed in March 2022. Selection of in vitro studies, data extraction and risk of bias analysis were performed following the PRISMA guidelines and registered at the Open Science Framework. The evaluated prosthetic materials corresponded to PMMA and tissue conditioner, treated with chitosan. RESULTS: After evaluating the eligibility criteria, 11 articles were included for the qualitative synthesis. The evaluated prosthetic materials corresponded to PMMA (n=8) and tissue conditioner (n=3). All studies performed the incorporation of chitosan in the tissue conditioner (n=3). Regarding PMMA, the use of chitosan as a denture cleanser was the most used (n=3), followed by incorporation (n=2), multilayers coating onto PMMA (n=2) and denture adhesive for PMMA (n=1). Chitosan has antimicrobial activity and is effective in the treatment of prosthetic materials in most studies, but it depends on some factors, such as the treatment method, the type and characteristics of the chitosan, the microorganism evaluated, and its form of organization. CONCLUSION: Chitosan showed highly antimicrobial activity and was effective when used in prosthetic materials.

Shaping ability of XP-endo Shaper and ProTaper Next in long oval-shaped canals: a micro-computed tomography study.

AIM: To evaluate the shaping ability of the single-file XP-endo Shaper system (XP-S; FKG Dentaire, La Chaux-de-Fonds, Switzerland) employing a different working time and of the multiple-file ProTaper Next system (Dentsply Sirona, Ballaigues, Switzerland) using micro-computed tomography (micro-CT) technology. METHODOLOGY: Twenty long oval-shaped canals in mandibular incisors were matched anatomically and scanned by micro-CT (Skyscan 1172; Bruker micro-CT, Kontich, Belgium). The canals were divided into two groups (n = 10) according to the canal preparation protocol: XP-endo Shaper (XP-S) with an extra 45 s of instrumentation and ProTaper Next (PTN X4). The images recorded before and after preparation were evaluated for morphometric measures of volume, surface area, structure model index and untouched walls. The data were compared statistically (Student's t-test for homogenous variances and Mann-Whitney test) between the two groups (XP-S and PTN X4) at α = 5%. RESULTS: Root canal preparation significantly increased all parameters (volume, surface area, structure model index and untouched walls) tested in each group (P < 0.05). There was no significant difference (P > 0.05) in the percentage increase of volume (107.50%-93.13%), surface area (27.74%-29.68%) or untouched canal wall (13.08%-11.74%) between XP-S and PTN X4, respectively. CONCLUSIONS: The XP-endo Shaper system (single-file) with an extra 45 s of instrumentation and the ProTaper Next system (multiple files) had a similar root canal shaping ability. Neither technique was able to fully prepare the long oval-shaped canals of mandibular incisors.

Extracellular L-asparaginase production in solid-state fermentation by using sugarcane bagasse as support material.

L-asparaginase is an important enzyme used in the pharmaceutical and food industry, which can be produced by different microorganisms using low cost feedstocks. In this work, sugarcane bagasse (SCB) was used as support for enzyme production in solid-state fermentation (SSF) by A. terreus. Initially, the influence of the variables carbon and nitrogen sources on the enzyme production was studied following an experimental design carried out in Erlenmeyer flasks. Statistical analysis indicated the use of 0.54% of starch, 0% of maltose, 0.44% of asparagine, and 1.14% of glutamine in the medium, resulting in enzyme activity per volume of produced extract of 120.723 U/L. Then, these conditions were applied in a horizontal column reactor filled with SCB, producing 105.3 U/L of enzyme activity. Therefore, the potential of extracellular L-asparaginase enzyme production in the column reactor using sugarcane bagasse as support was demonstrated and it represents a system that can favor large scale production.

What happens to unprepared root canal walls: a correlative analysis using micro-computed tomography and histology/scanning electron microscopy.

AIM: To microscopically examine the cleanliness of root canal walls that remained unprepared as revealed by micro-CT. METHODOLOGY: The root canals of 10 freshly extracted mandibular premolars with necrotic pulps and apical periodontitis along with the mesiobuccal canals of 11 mandibular molars with vital pulps were prepared using Reciproc instruments R40 and R25, respectively, and 2.5% sodium hypochlorite irrigation. Specimens were scanned in micro-CT before and after preparation, and the unprepared areas were identified. The outer root surface corresponding to the untouched areas was marked on each root third to guide further analysis using histological (for teeth with vital pulps) and scanning electron microscopic (SEM; for necrotic teeth) examination. In the teeth with vital pulps, the root canal area occupied by tissue remnants was calculated. In SEM analysis of teeth with necrotic pulps, scores were attributed for the amount of debris on the untouched areas. RESULTS: The proportion of unprepared areas in the mesiobuccal molar canals was 18.1% and 9.6% over the full canal length and apical canal, respectively. In premolars, corresponding figures were 34.6% and 17.6%, respectively. Histological analysis of canals with vital pulps revealed tissue remnants over the untouched walls almost exclusively in the apical canal. SEM analysis of the canals with necrotic pulps revealed debris along the untouched walls in all root canal thirds. CONCLUSION: The areas that remain untouched by Reciproc instruments used with 2.5% NaOCl irrigation as revealed by micro-CT analysis were usually covered with debris, in the form of pulp tissue remnants, bacteria and dentine chips, especially in the apical root canal.

Production of bioethanol in sugarcane bagasse hemicellulosic hydrolysate by Scheffersomyces parashehatae, Scheffersomyces illinoinensis and Spathaspora arborariae isolated from Brazilian ecosystems.

AIMS: This study aimed to evaluate new d-xylose-fermenting yeasts from Brazilian ecosystems for the production of second-generation ethanol. METHODS AND RESULTS: d-xylose-fermenting yeasts isolated from rotting wood and wood-boring insects were identified as the species Scheffersomyces parashehatae, Scheffersomyces illinoinensis, Spathaspora arborariae and Wickerhamomyces rabaulensis. Among the yeasts tested, those of Sc. parashehatae exhibited the highest ethanol production when cultivated on complex medium (Yp/set  = 0·437 g g-1 ). Sheffersomyces illinoinensis and Sp. arborariae showed similar ethanol production in this assay (Yp/set up to 0·295 g g-1 ). In contrast, in sugarcane bagasse hemicellulosic hydrolysate, Sc. parashehatae and Sc. illinoinensis exhibited similar ethanol production (Yp/set up to 0·254 g g-1 ), whereas Sp. arborariae showed the lowest results (peak Yp/set  = 0·160 g g-1 ). Wickerhamomyces rabaulensis exhibited a remarkable xylitol production (Yp/sxyl  = 0·681  g g-1 ), but producing low levels of ethanol (Yp/set  = 0·042 g g-1 ). CONCLUSIONS: The novel d-xylose-fermenting yeasts showed promising metabolic characteristics for use in fermentation processes for second-generation ethanol production, highlighting the importance of bioprospecting research of micro-organisms for biotechnological applications. SIGNIFICANCE AND IMPACT OF THE STUDY: This study widens the scope for future researches that may examine the native yeasts presented, as limited studies have investigated these species previously.

Evaluation of EPS extraction protocols from anaerobic sludge for gel-based proteomic studies.

Despite the importance of anaerobic sludge extracellular polymeric substances (EPSs), their characterization is limited to information regarding their chemical classes and molecular size. This work explores the possibility of using proteomic techniques to study the proteins present in this matrix. Thus, this paper compares eight EPS extraction methods regarding extraction yield, protein/carbohydrate ratio, size distribution profile and suitability to sodium dodecyl sulfate-polyacrylamide gel electrophoresis analyses. Despite the differences found in quantification and size exclusion chromatography assays, the band profile found for all methods was very similar. Considering the band pattern, extraction time and background level, heating method followed by ammonium sulfate precipitation proved to be the most appropriate method for gel-based analyses of anaerobic sludge EPS proteins.

Hydrodynamic cavitation-assisted acid pretreatment and fed-batch simultaneous saccharification and co-fermentation for ethanol production from sugarcane bagasse using immobilized cells of Scheffersomyces parashehatae.

A new alternative for hydrodynamic cavitation-assisted pretreatment of sugarcane bagasse was proposed, along with a simultaneous saccharification and co-fermentation (SSCF) process performed in interconnected columns. Influential variables in the pretreatment were evaluated using a statistical design, indicating that an ozone flow rate of 10 mg min-1 and a pH of 5.10 resulted in 86 % and 72 % glucan and xylan hydrolysis yields, respectively, in the subsequent enzymatic hydrolysis process. Under these optimized conditions, iron sulfate (15 mg L-1) was added to assess Fenton pretreatment, resulting in glucan and xylan hydrolysis yields of 92 % and 71 %, respectively, in a material pretreated for 10 min. In SSCF, ethanol volumetric productivities of 0.33 g L-1 h-1 and of 0.54 g L-1 h-1 were obtained in batch and fed-batch operation modes, achieving 26 g L-1 of ethanol in 48 h in the latter mode.

Haematophagous feeding of newly metamorphosed European sea lampreys Petromyzon marinus on strictly freshwater species.

Approximately 6% of the freshwater living northern straight-mouth nase Pseudochondrostoma duriense in two Spanish rivers had attached post-metamorphic sea lamprey Petromyzon marinus. Minimum prey size was 16·1 cm fork length and 56·3 g mass. The condition factor of attacked P. duriense was 16% lower than that of unattacked conspecifics.

Carbohydrate-protein interaction-based detection of pathogenic bacteria using a biodegradable self-powered biosensor.

Battery-free and biodegradable sensors can detect biological elements in remote areas. The triboelectric nanogenerator (TENG) can potentially eliminate the need for a battery by simply converting the abundant vibrations from nature or human motion into electricity. A biodegradable sensor system integrated with TENG to detect commonly found disease-causing bacteria (E. coli) in the environment is showcased herein. In this system, D-mannose functionalized 3D printed polylactic acid (PLA) with the brush-painted silver electrode was used to detect E. coli by a simple carbohydrate-protein interaction mechanism. The adsorption capacity of D-mannose is generally altered by varying the concentration of E. coli resulting in changes in resistance. Thus, the presented biosensor can detect bacterial concentrations by monitoring the output current. The PLA TENG generates an output of 70 V, 800 nA, and 22 nC, respectively. In addition, tap water and unpasteurized milk samples are tested for detecting bacteria, and the output is measured at 6 µA and 5 µA, respectively. Further, the biosensor was tested for biodegradability in soil compost by maintaining constant temperature and humidity. This study not only proposes an efficient and fast method for screening E. coli but also gives important insights into the ability to degrade and long-term reliability of TENG-based sensor platforms.

The effect of pH on the functionalization of nylon fabric with carbon nanotubes.

Single walled carbon nanotubes (SWCNTs) were dispersed in water and attached to nylon fabrics by a dip-drying procedure; scanning electron microscopy and Raman spectroscopy suggest the attachment of the SWCNTs. The electrical resistance of the functionalized fabrics is found to be pH-dependent, which is correlated with the quantity of SWCNTs dispersed in water at different values of pH. This can be further ascribed to the influence of the pK(a) of the acid (e.g., acetic acid in this study) used to tune pH. The acid may affect the dispersion of SWCNTs through two different mechanisms: (1) the free protons may protonate the amine and/or sulfonate group in the dye molecules, resulting in a variety of interactions among the dye molecules, SWCNTs and water molecules and (2) the resulting ions may increase the ionic strength of the solution, compressing the electric double layers of SWCNT colloids and thus impairing their stability. The former possibility is ruled out by data obtained using X-ray photoelectron spectroscopy, Raman spectroscopy, and ultraviolet-visible-near infrared spectroscopy; thus the latter is proposed to account for the experimental results. The colour strength of the functionalized fabrics increases with increasing pH, which is in agreement with their measured electrical properties.

Silver nanoparticles: influence of stabilizing agent and diameter on antifungal activity against Candida albicans and Candida glabrata biofilms.

AIM: The purpose of this work was to evaluate the size-dependent antifungal activity of different silver nanoparticles (SN) colloidal suspensions against Candida albicans and Candida glabrata mature biofilms. METHODS AND RESULTS: The research presented herein used SN of three different average sizes (5, 10 and 60 nm), which were synthesized by the reduction of silver nitrate through sodium citrate and which were stabilized with ammonia or polyvinylpyrrolidone. Minimal inhibitory concentration (MIC) assays were performed using the microdilution methodology. The antibiofilm activity of SN was determined by total biomass quantification (by crystal violet staining) and colony forming units enumeration. MIC results showed that all SN colloidal suspensions were fungicidal against the tested strains at very low concentrations (0·4-3·3 µg ml(-1) ). With regard to biomass quantification, SN colloidal suspensions were very effective only against C. glabrata biofilms, achieving biomass reductions around 90% at a silver concentration of 108 µg ml(-1) . In general, all SN suspensions promoted significant log(10) reduction of the mean number of cultivable biofilm cells after exposure to silver concentrations at or higher than 108 µg ml(-1) . Moreover, the results showed that the particle size and the type of stabilizing agent used did not interfere in the antifungal activity of SN against Candida biofilms. CONCLUSIONS: This study suggests that SN have antifungal therapeutic potential, but further studies are still required namely regarding formulation and delivery means. SIGNIFICANCE AND IMPACT OF THE STUDY: SN may contribute to the development of new strategies for the improvement of oral health and quality of life particularly of the complete denture wearers.

Effect of air-drying on the solvent evaporation, degree of conversion and water sorption/solubility of dental adhesive models.

This study evaluated protocols to eliminate acetone from dental adhesives and their effect on the kinetic of water sorption and percent of conversion of these adhesives. Experimental methacrylate-based adhesives with increasing hydrophilicity (R2, R3, R5) were used as reference materials. Primer-like solutions were prepared by addition of 50 wt% acetone. Acetone elimination was measured gravimetrically before and after: a spontaneous evaporation, an application of air-drying at room temperature or application of 40°C air-drying. Protocols were performed from 15 to 60 s. Specimens of adhesive/acetone mixtures were photo-activated and tested for degree of conversion, water sorption and solubility. Data were analyzed by ANOVA and Bonferroni's tests (α = 0.05). Complete acetone elimination was never achieved, but it was significantly greater after the 40°C air-drying application. Higher acetone elimination was observed for the least hydrophilic adhesive. Longer periods for acetone evaporation and heated air-stream can optimize polymerization and reduce the water sorption/solubility of adhesive system models.

Push-out strength of root fillings with or without thermomechanical compaction.

AIM: To evaluate the influence of thermomechanical compaction (Tagger's hybrid technique - THT) on the push-out strength of several root filling materials to root dentine. METHODOLOGY: Root canals of eighty roots in human canines were prepared with the ProTaper system and filled with one of the following materials, using either lateral compaction (LC) (n = 40) or THT (n = 40): AH Plus/gutta-percha (GP) (n = 10), Sealer 26/GP (n = 10), Epiphany SE/Resilon (n = 10) and Epiphany SE/GP (n = 10). Three 2-mm-thick dentine slices were obtained from each third of each root. The root filling in the first slice was subjected to a push-out test to evaluate the bond strength of the materials to intraradicular dentine. Data (in MPa) were analysed using anova and post hoc Tukey's test (P < 0.05). Failure mode was determined at × 25 magnification. The other two slices were prepared for scanning electron microscopy (SEM) to examine the surface of the filling materials. RESULTS: Lateral compaction (1.34 ± 1.14 MPa) was associated with a significantly higher bond strength (P < 0.05) than the THT (0.97 ± 0.88 MPa). AH Plus/GP (2.23 ± 0.83 MPa) and Sealer 26/GP (1.86 ± 0.50 MPa) had significantly higher bond strengths than the other materials and differed significantly from each other (P < 0.05). There was a significant difference (P < 0.05) between the coronal (1.36 ± 1.15 MPa), middle (1.14 ± 1.05 MPa) and apical thirds (0.95 ± 0.83 MPa). Considering the technique and root filling material interaction, AH Plus/GP-LC was associated with the highest mean values (2.65 ± 0.66 MPa) (P < 0.05). Sealer 26/GP-LC (2.10 ± 0.46 MPa), AH Plus/GP-THT (1.81 ± 0.78 MPa) and Sealer 26/GP-TH (1.63 ± 0.44 MPa) had intermediate values that were not significantly different from each other (P > 0.05). Epiphany SE was associated with the lowest mean values (3.70 ± 0.86 MPa) (P < 0.05), regardless of the root filling technique and type of solid material (cone). Adhesive failures predominated in the specimens filled with Epiphany SE, whilst mixed and cohesive failures were more frequent in those filled with AH Plus and Sealer 26, regardless of the root filling technique. SEM analysis revealed that LC produced a dense and well-compacted filling whilst the use of a hybrid thermomechanical technique resulted in the solid material (GP or Resilon) intermingled within sealer to form a nonhomogenous mass. CONCLUSION: Lateral compaction was associated with higher bond strengths of the materials to intraradicular dentine than a hybrid technique using thermomechanical compaction. The greatest push-out strengths were obtained when the canals were filled with LC of AH Plus and GP cones.

Evaluation and insights into chitosan antimicrobial activity against anaerobic oral pathogens.

The objective of this study was to assess the antimicrobial capability of non-chemically altered chitosan as an alternative to traditional antimicrobials used in the treatment of oral infections. The action mechanism of chitosan was also ascertained. High and low molecular weight chitosan showed antimicrobial activity at low concentrations for all tested bacteria with the MICs varying between 1 and 7 mg/ml with a drop of efficacy relatively to the action of LMW chitosan. In addition chitosan showed also to be an effective bactericidal presenting bactericidal effect within 8 h at the latest. Additionally the evaluation of chitosan's action mechanism showed that both MWs acted upon the bacterial cell wall and were not capable of interacting with the intracellular substances, as showed by the inefficacy obtained in the flocculation assay.

Effects of potassium oxalate on knoop hardness of etch-and-rinse adhesives.

The objective of this study was to determine whether the hardness of etch-and-rinse adhesives may be affected by the pretreatment of acid-etched dentin with potassium oxalate desensitizer. Unerupted human third molars were cut into crown segments by removing the occlusal enamel and roots. The pulp chamber of these crown segments was connected to a syringe barrel filled with phosphate-buffered saline so that the moisture of dentin was maintained during the bonding procedures. Three etch-and-rinse adhesives-two two-step systems (Adper Single Bond 2 [SB], One-Step [OS]) and one three-step system (Adper Scotchbond Multi-Purpose [MP])-were applied to acid-etched dentin that had been treated (experimental groups) or not (control groups) with potassium oxalate (BisBlock). The Knoop hardness (KHN) of adhesives was taken at different sites of the outer surface of the adhesive-bonded dentin. The KHN of the three tested adhesives applied to acid-etched dentin treated with potassium oxalate was significantly lower than that exhibited by the respective controls (not treated with oxalate; p<0.05). Regardless of the adhesive, the treatment with potassium oxalate reduced the adhesives' KHN (p<0.05), with the OS system exhibiting the lowest KHN compared with the MP and SB systems.

A review on recent developments in hydrodynamic cavitation and advanced oxidative processes for pretreatment of lignocellulosic materials.

Environmental problems due to utilization of fossil-derived materials for energy and chemical generation has prompted the use of renewable alternative sources, such as lignocellulose biomass (LB). Indeed, the production of biomolecules and biofuels from LB is among the most important current research topics aiming to development a sustainable bioeconomy. Yet, the industrial use of LB is limited by the recalcitrance of biomass, which impairs the hydrolysis of the carbohydrate fractions. Hydrodynamic cavitation (HC) and Advanced Oxidative Processes (AOPs) has been proposed as innovative pretreatment strategies aiming to reduce process time and chemical inputs. Therefore, the underlying mechanisms, procedural strategies, influence on biomass structure, and research gaps were critically discussed in this review. The performed discussion can contribute to future developments, giving a wide overview of the main involved aspects.

Non-ionic surfactant formulation sequentially enhances the enzymatic hydrolysis of cellulignin from sugarcane bagasse and the production of Monascus ruber biopigments.

The effect of a non-ionic surfactant optimized formulation (SOF) obtained from an experimental design was evaluated for different influencing variables in the processing of sugarcane bagasse cellulignin to produce biopigments. The major findings in the saccharification stage using the SOF point that: at same enzyme loading, the highest glucan hydrolysis yield was 63 % (2-fold higher compared to control); the enzyme loading of 2.5 FPU/g resulted in similar yield compared to 10 FPU/g (control); 15 % (m/v) of total solids loading maintained the yield in fed-batch configuration; the hydrolysis yield is maintained at high shear force stress (800 rpm of stirring rate) and temperatures (50-70 °C). Besides, under separate and semi-simultaneous hydrolysis and fermentation, the maximum biopigments production were of 10 AU510nm/mL and 17.84 AU510nm/mL, respectively. The SOF used in this study was found to be a promising additive either in a single or sequential steps to produce biopigments in biorefineries.

Engineering the plasmon resonance of large area bimetallic nanoparticle films by laser nanostructuring for chemical sensors.

Large area fabrication of metal alloy nanoparticles with tunable surface plasmon resonances on low-cost substrates is reported. A UV excimer laser was used to anneal 5 nm thick Ag Au bilayer films deposited with different composition ratios to create alloy nanoparticles. These engineered surfaces are used to investigate how the wavelength of the surface plasmon resonance affects the optical detection capability of chemical species by surface-enhanced Raman spectroscopy.

Silver colloidal nanoparticles: antifungal effect against adhered cells and biofilms of Candida albicans and Candida glabrata.

The aim of this study was to evaluate the effect of silver nanoparticles (SN) against Candida albicans and Candida glabrata adhered cells and biofilms. SN (average diameter 5 nm) were synthesized by silver nitrate reduction with sodium citrate and stabilized with ammonia. Minimal inhibitory concentration (MIC) tests were performed for C. albicans (n = 2) and C. glabrata (n = 2) grown in suspension following the Clinical Laboratory Standards Institute microbroth dilution method. SN were applied to adhered cells (2 h) or biofilms (48 h) and after 24 h of contact their effect was assessed by enumeration of colony forming units (CFUs) and quantification of total biomass (by crystal violet staining). The MIC results showed that SN were fungicidal against all strains tested at very low concentrations (0.4-3.3 µg ml(-1)). Furthermore, SN were more effective in reducing biofilm biomass when applied to adhered cells (2 h) than to pre-formed biofilms (48 h), with the exception of C. glabrata ATCC, which in both cases showed a reduction ∼90%. Regarding cell viability, SN were highly effective on adhered C. glabrata and respective biofilms. On C. albicans the effect was not so evident but there was also a reduction in the number of viable biofilm cells. In summary, SN may have the potential to be an effective alternative to conventional antifungal agents for future therapies in Candida-associated denture stomatitis.

Quantitative 3D profilometry and SEM analysis of the adaptation of root-end filling materials placed under an optical microscope.

AIM: To evaluate by 3D profilometry and scanning electron microscopy (SEM), the marginal adaptation of mineral trioxide aggregate (MTA) and Sealer 26 placed in root-end cavities with direct vision or under an optical microscope. METHODOLOGY: The root ends of 52 root filled canine teeth were filled with MTA or Sealer 26 under direct vision or optical microscope (n=13). In each group, eight specimens were analysed by profilometry for measurement of the area and depth of gaps. In the other five specimens, gap area was measured using SEM to verify marginal adaptation and surface characteristic. Data were analysed by parametric (anova and Tukey) and non-parametric (Kruskal-Wallis and Dunn) tests. RESULTS: The assessment of the adaptation of both materials to dentine was not influenced by the mode of visualization, which was confirmed by both profilometry and SEM observations. The voids measured with profilometry for Sealer 26 under direct vision were significantly wider and deeper than those for MTA under direct vision (P<0.05). In SEM, significantly larger gap areas were observed with Sealer 26 (P<0.05). CONCLUSION: Root-end cavities filled with MTA had smaller gaps and better marginal adaptation than Sealer 26.