The prominent proteins expressed in healthy gingiva: a pilot exploratory tissue proteomics study.

Gingiva is a unique tissue which protects the underlying periodontal tissues from consistent mechanical and bacterial aggressions. Molecular analysis of gingiva is likely to improve our understanding of the underlying biological processes at work. The aim of this preliminary exploratory study is to analyze the proteomic profile of healthy gingiva and to detect prominently expressed proteins. Gingival tissue samples were obtained from periodontally healthy individuals who underwent surgical crown lengthening procedure. After protein isolation, two dimensional gel electrophoresis (2DE) gels were prepared for each sample and only protein spots common to all gels were selected to eliminate the bias caused by the effect of individuals on proteomic profile. Following the 2DE; in-gel tryptic digestion and MALDI-TOF/TOF steps were performed for protein identifications. Forty-seven proteins were successfully identified. The identified proteins were classified based on their classes, molecular functions and involvements in biological processes and metabolic pathways. Among them, 14-3-3 protein sigma, Protein DJ-1, Alpha-enolase, Triosephosphate isomerase, Superoxide dismutase, Peroxiredoxin-1, Protein S100-A9, Galectin-7, Annexin A2/A4, Carbonic anhydrase 1 and chaperone proteins are worthy of attention. The proteomic profile of the gingiva reflected its highly dynamic characteristics. Despite complexity of the gingival tissue proteome, 2DE was an effective approach in studying the common protein expression profile of the gingiva. Considering the significance of gingiva in the formation of periodontal diseases, it is important to generate a detailed proteome map of gingival tissue to set up a bridge between molecular events and the disease formation. This study established an initial proteome map of the gingival tissue from healthy individuals.

Correlation between spheno-occipital synchondrosis, dental age, chronological age and cervical vertebrae maturation in Turkish population: is there a link?

OBJECTIVE: To assess the correlation between third molar mineralization (TMM), spheno-occipital synchondrosis (SOS) fusion, chronologic age and cervical vertebrae maturation (CVM) for skeletal maturation. MATERIALS AND METHODS: Radiographs for 116 patients between 8 and 28 years were evaluated for age determination using mandibular TMM, SOS fusion and CVM. Spearman Correlation and Kappa test analyses were used to assess the relationship between variables and for intraobserver reliability. RESULTS: Strong correlation was found between chronological age and TMM for males (r = .802) and females (r = .842), very strong correlation was found between age and CVM for males (r = .812) and moderate for females (r = .449), it was strong between age and SOS fusion for males (r = .810) and females (r = .643). Correlation between TMM and SOS was found to be strong for males (r = .759) and moderate for females (r = .534), it was strong between TMM and CVM for males (r = .723) and weak for females (r = .371). Very strong correlation was found between CVM and SOS fusion for males (r = .851) and strong correlation for females (r = .618). CONCLUSION: Good correlation was found between the degrees of TMM, fusion of SOS and CVM in young Turkish population.

Radiologic assessment of third molar tooth and spheno-occipital synchondrosis for age estimation: a multiple regression analysis study.

For forensic age estimation, radiographic assessment of third molar mineralization is important between 14 and 21 years which coincides with the legal age in most countries. The spheno-occipital synchondrosis (SOS) is an important growth site during development, and its use for age estimation is beneficial when combined with other markers. In this study, we aimed to develop a regression model to estimate and narrow the age range based on the radiologic assessment of third molar and SOS in a Turkish subpopulation. Panoramic radiographs and cone beam CT scans of 349 subjects (182 males, 167 females) with age between 8 and 25 were evaluated. Four-stage system was used to evaluate the fusion degree of SOS, and Demirjian's eight stages of development for calcification for third molars. The Pearson correlation indicated a strong positive relationship between age and third molar calcification for both sexes (r = 0.850 for females, r = 0.839 for males, P < 0.001) and also between age and SOS fusion for females (r = 0.814), but a moderate relationship was found for males (r = 0.599), P < 0.001). Based on the results obtained, an age determination formula using these scores was established.

Evaluation of Optic Canal and Surrounding Structures Using Cone Beam Computed Tomography: Considerations for Maxillofacial Surgery.

The optic canal connects the anterior cranial fossa and the orbit and maintains the optic nerve and the ophthalmic artery. Within the extent of the surgical approach of the region, risk of iatrogenic injury of the neural and vascular structures increases. The aim of this retrospective morphometric study is to investigate the radiological anatomy of orbita, optic canal, and its surrounding using cone beam computed tomography (CBCT) scans in a group of Turkish population.Cone beam computed tomography images of a total of 182 patients were evaluated by 2 observers. Anatomical parameters regarding optic canal and orbita were measured for all patients from axial, sagittal, and three-dimensional reconstructed images. To assess intraobserver reliability, the Wilcoxon matched-pairs test was used. Pearson χ test and Student t test were performed for statistical analysis of differences, sex, localization, and measurements (P < 0.05).Repeated CBCT evaluation and measurements indicated no significant inter and intra-observer difference were found (P > 0.05). The orbita width and height were larger for the males than females (P < 0.05). No significant difference was observed for optic canal shape, dimensions of infraorbital foramen (IOF) and supraorbital foramen (SOF), SOF-midline distance, and SOF-IOF distance according to sex and location (P > 0.05). Examination CBCT scans revealed that the shape of the optic canal was 70% funnel and 28% Hourglass shape, 2% amorph type round.These results provide detailed knowledge of the anatomical characteristics in the orbital area which may be of assistance for surgeons preoperatively. Cone beam computed tomography scans can be an alternative modality for multislice computed tomography with submillimeter resolution and lower dose in preoperative imaging of the orbit.

The importance of clinical and radiological findings for the definitive histopathologic diagnosis of benign fibro-osseous lesions of the jaws: Study of 276 cases.

PURPOSE: Benign fibro-osseous lesions (BFOLs) are heterogeneous intraosseous disease processes sharing overlapping histopathologic features and demonstrate a wide range of biological behavior. The aim of this study is to highlight the importance of clinical and radiological findings for the definitive histopathologic diagnosis of benign fibro-osseous lesions of the jaws. MATERIALS AND METHODS: This is a cross-sectional retrospective study evaluating the three main groups of BFOLs: Cemento-osseous dysplasia, ossifying fibromas, and fibrous dysplasia. Previously diagnosed BFOL cases were searched for thoroughly from the archives of Istanbul University, Institute of Oncology, Department of Tumor Pathology in between 2005 and 2015. Clinical and radiological data of these cases were identified and recorded. The histopathologic features were reevaluated from the H&E-stained slides. RESULTS: A total of 276 BFOL cases were identified and reevaluated for the study. The most common BFOL type was cemento-osseous dysplasia (n = 135), followed by cemento-ossifying fibroma (n = 77), fibrous dysplasia (n = 53) and juvenile ossifying fibroma (n = 11). The female/male ratio was 3.4:1 with a strong predilection for the 4th decade (n = 102). The mandible (n = 209) was the predominantly affected jaw. Prominent osteoblastic rimming around the bony lesion was commonly observed for cemento-ossifying fibroma (n = 60/77), followed by cemento-osseous dysplasia (n = 23/135). Predominant ossification patterns showed some differences among the groups. The most common radiological feature was the mixed radiolucent/radiopaque internal structure. CONCLUSION: Our results document various clinical, radiological and histopathologic findings of BFOLs. Even some histopathologic differences are observed, clinical and radiographic correlation is mandatory prior to the definitive histopathologic diagnosis of BFOLs for the prevention of possible misdiagnoses or inappropriate treatments.

Excision of Rare Intraosseous Traumatic Neuroma of the Mandible.

Traumatic neuroma is a non-neoplastic proliferative disorder of the nerve sheath in response to injury or surgery. Traumatic neuroma most frequently occurs in soft tissues and intraosseous involvement is uncommon. In this paper, we present a rare case of intraosseous traumatic neuroma of the inferior alveolar nerve leading to pain and paresthesia of the lower lip on the left side.

Contrast-to-noise ratio with different settings in a CBCT machine in presence of different root-end filling materials: an in vitro study.

OBJECTIVES: To compare the contrast-to-noise ratio (CNR) of multiple acquisition settings for four types of retrograde filling materials in CBCT images taken for endodontic surgery follow-up. METHODS: 20 maxillary central incisors were endodontically treated and obturated with 4 different root-end filling materials: amalgam, mineral trioxide aggregate, SuperEBA(™) (Harry J Bosworth Company, Skokie, IL) and Biodentine™ (Septodont, Saint-Maur-des-Faussés, France). Teeth were placed in a skull and scanned, one by one, with the Planmeca ProMax(®) 3D Max (Planmeca, Helsinki, Finland); at different voltages: 66, 76, 84 and 96 kVp; with low, normal and high resolution and high definition (HD); with and without metal artefact reduction (MAR). Images were analyzed using ImageJ software (National Institutes of Health, Bethesda, MD) to calculate the CNR. The dose-area product was registered, and the effective dose calculated. RESULTS: No statistically significant difference was noted between the four materials. 84 and 96 kVp with low resolution and the use of MAR-generated images that have statistically better CNR than 66 and 76 kVp with HD, normal and high resolutions and without MAR. The use of low resolution also generated the smallest value of effective dose. CONCLUSIONS: The best setting for radiographic follow-up in an endodontic surgery with retrograde filling on the Planmeca ProMax is 96 kVp with low resolution and high MAR; this setting produced one of the lowest effective doses.

Histological validation of cone-beam computed tomography versus laser fluorescence and conventional diagnostic methods for occlusal caries detection.

OBJECTIVE: The purpose of this study was to compare the validity of visual (VE), radiological (RE), cone beam computed tomography (CBCT), and laser fluorescence (LFE) examination methods for the detection of the occlusal noncavitated caries in permanent posterior teeth. METHODS: Two examiners assessed 121 selected sites on the occlusal surfaces of 44 molar teeth by visual (International Caries Assessment and Detection System II [ICDAS]), radiographic (bite-wing projection) cone-beam computed tomography, and laser fluorescence (DIAGNOdent Pen) examination methods. After a 1-week interval, each measurement was repeated by two examiners. Then, the teeth were sectioned, and histological evaluation was performed, which serves as the gold standard. The lesion depths were classified and correlated with the methods evaluated for validation. The intra- and inter-examiner reliability (sensitivity, specificity) and reproducibility of all examination methods were calculated using a weighted Cohen's κ statistic. The correlation between the examination methods was determined using receiver operating characteristic (ROC) analysis indicating the area under the curve (AUC). RESULTS: CBCT exhibited excellent intra-examiner (0.76 for examiner 1, 0.78 for examiner 2) and fair to good inter-examiner (0.63 for the first, 0.64 for the second measurements) reproducibility. The intra-examiner reproducibility was excellent for the LFE method according to the weighted κ values of examiners 1 (0.90) and 2 (0.79). Among the combined methods, the highest AUC values (0.81-0.95) were obtained for the CBCT examination method performed by the two examiners at both the first and second measurements. CONCLUSIONS: Cone beam computed tomography showed better performance than other diagnostic methods.

Use of cone-beam computed tomography and three-dimensional modeling for assessment of anomalous pulp canal configuration: a case report.

Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.

Retreatment of a maxillary lateral incisor with two separate root canals confirmed with cone beam computed tomography.

The purpose of this report is to present a rare case of a maxillary lateral incisor exhibiting two separate root canals confirmed by cone-beam computed tomography (CBCT). A 65-year-old female patient with an esthetic complaint regarding her maxillary left lateral incisor was referred to our clinic. During a radiographical examination, an endodontically treated root canal and an extra root canal with an apical lesion were observed. The retreatment was performed. CBCT findings confirmed the root canal mophology of the maxillary left lateral with two distinct canals. We conclude that the CBCT imaging is an adjunctive tool for better assessment of complex root canal systems.

Management of an intruded tooth and adjacent tooth showing external resorption as a late complication of dental injury: three-year follow-up.

Treatment and prognosis of intrusive luxation can vary depending on the age of the patient, type of dentition, stage of root development, and time and severity of the trauma. Some studies have demonstrated that intrusions of up to 3.0 mm have an excellent prognosis, whereas teeth with severe intrusion or teeth that are intruded more than 6.0 mm present an unfavorable prognosis because of the occurrence of inflammatory resorption and pulp necrosis. The aim of this case report is to present an 11-year-old male patient with complete intrusion of the permanent maxillary left lateral incisor, associated with the adjacent central tooth presenting external resorption, treated by immediate surgical repositioning and root canal treatment with a favorable prognosis. After long-term (3-year) clinical and radiographic follow-up, the teeth appeared normal and the patient was pleased with the outcome.

Diagnosis of occlusal caries using laser fluorescence versus conventional methods in permanent posterior teeth: a clinical study.

OBJECTIVE: The purpose of this in vivo study was to compare three different caries detection methods [laser fluorescence (LFE), visual examination (VE), and radiological examination (RE)] for the detection of occlusal caries in permanent posterior teeth. BACKGROUND DATA: Early diagnosis of caries is critical in the management of dental caries. METHODS: Two examiners assessed the occlusal surfaces of 217 teeth by visual, radiographic, and laser fluorescence (DIAGNOdent Pen) examination methods. After a 1 week interval, randomly selected patients were recalled. Each measurement was repeated by two examiners before the cases were selected for operative intervention to classify lesion depths. Statistical analysis of the data was performed using SPSS and Stata IC. The intra- and inter-examiner reliabilities and reproducibilities of the VE, RE, and LFE were calculated using Cohen's κ statistics. The sensitivities and specificities were plotted in receiver operating characteristic curves. The differences between LFE scores were analyzed using the nonparametric Mann-Whitney U and Wilcoxon tests (α=0.05). RESULTS: The VE method exhibited the highest sensitivity, accuracy, and κ values among the diagnostic groups in terms of inter-examiner agreement. With regard to the sensitivity, specificity, and likelihood ratios for the two examiners, significant differences were found between sensitivity and specificity for examiner 1, whereas no statistically significant differences were noted between sensitivity and specificity for examiner 2 for the LFE scores. CONCLUSIONS: The DIAGNOdent pen is useful for the detection of dentinal caries of occlusal surfaces in permanent posterior teeth. Combination with other diagnostic conventional methods may enhance the reliability of this tool.

Analysis of C-shaped canals by panoramic radiography and cone-beam computed tomography: root-type specificity by longitudinal distribution.

INTRODUCTION: The purpose of this study was to document the characteristics of C-shaped canal systems in permanent mandibular second molars using a combination of orthopantomogram (OPT) and cross-sectional cone-beam computed tomographic (CBCT) imaging. METHODS: Two hundred participants (94 men and 106 women, mean age = 35 years) who underwent both routine CBCT and OPT examinations were enrolled. One endodontist and 1 oral radiologist examined the images of 339 mandibular second molars and described the radiographic features of C-shaped canals from OPT images as confirmed by CBCT imaging. Root morphology was classified as nonfused (NFRI-II) or fused (FRI-III) based on OPT images. Cross-sectional root canal configurations (C1-C5) were identified from CBCT imaging at 3 different levels (coronal, middle, and apical). Frequency distributions of root morphology and root canal configurations were compared at each level, and interobserver reliability was tested using the Cohen kappa test. RESULTS: Of the 339 teeth, 29 (8.6 %) had C-shaped root canal systems. Most of the root canals were NFR type (86%); only 2% had C-shaped root canals (all NFRII). In the FR category, 23 teeth with C-shaped canals were equally distributed between the FRI and FRII subtypes. Interobserver agreement was almost perfect (κ = 0.89 and κ = 0.91; right and left second molars, respectively). Per CBCT imaging, the most common configuration was C3 at all levels; no C5 case was detected. CONCLUSIONS: OPT usage can assist in recognizing and diagnosing C-shaped root canal systems. Radicular fusion or proximity is a characteristic feature of C-shaped canal systems. However, nonfused root appearances should also be considered suspicious.