Wound healing efficacy of a polymeric spray film solution containing Centella asiatica leaf extract on acute wounds.

OBJECTIVE: To study the clinical efficacy of a polymeric spray film containing Centella asiatica extract to heal acute wounds. METHOD: A polymeric spray film solution for wound healing was formulated using Centella asiatica extract, which contained triterpenes, including asiatic acid, madecassic acid, asiaticoside and madecassoside. The stability and physicochemical properties of the formulation were evaluated, and a multicentre, randomised, controlled trial was conducted to assess its clinical wound-healing efficacy. The Pressure Ulcer Scale for Healing (PUSH Tool) score was used to evaluate wound healing on days 0, 3, 5 and 7. RESULTS: The cohort consisted of 60 volunteers with clean-contaminated wounds (class 1), randomly assigned to the Control (n=30) and Testing (n=30) groups. The spray product contained asiatic acid, madecassic acid, asiaticoside and madecassoside at 0.20±0.02mg/ml, 0.16±0.01mg/ml, 0.32±0.03mg/ml and 0.10±0.00mg/ml, respectively. The pH value was 5.5±0.01, and the viscosity was 33±4cP. The product was stable for six months when stored at 30±2°C and at 40±2°C, in 75±5% relative humidity. The tested product significantly reduced the total PUSH and exudate scores, indicating that the polymeric spray film solution containing Centella asiatica improved wound healing. The average healing recovery times for the Testing and Control groups were 4.6±1.1 days and 4.87±1.0 days, respectively. CONCLUSION: In this study, Centella asiatica extract-containing polymeric spray film solution was beneficial as an acute wound medication, which could shorten healing time with no adverse effects.

α-Mangostin and lawsone methyl ether in tooth gel synergistically increase its antimicrobial and antibiofilm formation effects in vitro.

OBJECTIVES: α-Mangostin (α-MG) and lawsone methyl ether (LME) show antimicrobial and anti-biofilm activities. The objectives of this study were to develop a herbal tooth gel containing α-MG and LME plus fluoride and determine its antimicrobial, anti-biofilm formation, anti-cancer, anti-inflammatory, wound healing, and enamel microhardness effects. METHODS: Antimicrobial assays against Streptococcus mutans, Porphyromonas gingivalis, and Candida albicans were performed. The microbes' ultrastructural morphology was assessed using Transmission Electron Microscopy. The effect on microbial biofilm formation was tested by a broth microdilution. Cell viability was assessed with MTT assay. The anti-inflammatory effect was investigated by measuring inhibition of nitric oxide production. Enamel microhardness was measured via Vickers microhardness testing. The enamel chemical composition was investigated with Fourier Transform Spectrometer. The enamel surface morphology and fluoride content were examined by Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy. RESULTS: The results show synergistic effects of α-MG and LME on antimicrobial activity and antibiofilm formation without cytotoxicity at a therapeutic dose. At a higher dose, the tooth gel inhibited proliferation of cancer cell line. Enamel microhardness was increased after brushing with the tooth gel plus fluoride. A large amount of fluoride was detected on the enamel surface. CONCLUSION: The tooth gel containing α-MG and LME synergized its antimicrobial activity and antibiofilm formation and inhibited oral cancer cell proliferation. Incorporating fluoride into the tooth gel increased enamel microhardness. Thus, the herbal tooth gel containing α-MG and LME plus fluoride may be useful for preventing dental caries and promoting oral health.

Using polyvinyl alcohol-ionic hydrogels containing a wound healing agent to manage wounds in different environments.

OBJECTIVE: To explore the effects of pH on properties of polyvinyl alcohol (PVA)-ionic hydrogels containing wound healing promoters. METHOD: PVA was combined with a natural wound healing promoter (silk sericin (SS)), and an anionic agent (eosin (ES)) or cationic agent (methylene blue (MB)), and made into hydrogels. Properties of the hydrogels and behaviour at different pHs were investigated. RESULTS: The density and gel fraction of PVA/SS-ES hydrogel and PVA/SS-MB hydrogel were considerably lower compared with hydrogel without SS. The swelling ratio and degradation of the hydrogels increased with increasing SS concentration in all pH solutions. The influence of SS in interrupting long-chain PVA molecules was confirmed based on changes in Fourier-transform infrared spectroscopy (FTIR). The SS released from the gels was found to interact with the ionic agent and influenced the release profile of the ionic agent. Surprisingly, the anionic agent in PVA/SS-ES hydrogel showed 70% release in high pH solution whereas the cationic agent in PVA/SS-MB hydrogel showed 86% release in low pH solution. Moreover, the active agent could accumulate on the skin layer and had a positive effect on a specific wound area. CONCLUSION: Based on the results obtained in this study, it is suggested to use anionic hydrogels containing wound healing promoter for wounds at high pH and cationic hydrogels containing wound healing promoter for wounds with low pH. Ability to improve wound healing using a natural healing agent combined with ionic agents and controlling the pH of hydrogels will help in developing quick and low-cost treatment for wounds.

A facile one-step jet-milling approach for the preparation of proliposomal dry powder for inhalation as effective delivery system for anti-TB therapeutics.

OBJECTIVE: Physicochemical characterization and assessment of aerosol dispersion performance of anti-TB proliposome dry powders for inhalation (DPIs) prepared using a single-step jet-milling (JM) approach. SIGNIFICANCE: Conventional tuberculosis (TB) treatment involves isoniazid and rifampicin as first-line agents in extended oral multi-drug regimes. Liposomal DPIs are emerging as promising alternatives for targeted delivery of anti-TB agents to alveolar macrophages harboring Mycobacterium tuberculosis. However, traditional approaches for liposomal DPI preparation are tedious, time consuming and require sophisticated/expensive equipment. The proposed JM technique for preparation of proliposome DPIs could obviate these limitations and facilitate use of these drugs for more effective and safer treatment. METHODS: Proliposome DPIs containing isoniazid and/or rifampicin, cholesterol and cholesterol sulfate were successfully prepared via JM (injection pressure, 7.4 bar; milling pressure, 3.68 bar). Their physicochemical, content uniformity, and in vitro aerosol dispersion performance were assessed using scanning electron microscopy/energy-dispersive X-ray spectroscopy, transmission electron microscopy, dynamic light scattering/Zeta potential, X-ray diffraction spectroscopy, thermogravimetric analysis, high-performance liquid chromatography, and the Next-Generation Impactor. RESULTS: The DPIs exhibited consistent, spherically shaped, smooth particles. Drug particles were evenly distributed with acceptable content uniformity. Drug crystallinity was not significantly affected by milling and the formulations had minimal (<2.0%) water content. After reconstitution of the DPIs, the hydrodynamic size was about 370.9-556.2 nm and charge was -12.3 to -47.3 mV. Furthermore, the proliposome DPIs presented emitted dose (69.04-89.03%), fine particle fraction, <4.4 µm (13.7 - 57.8%), and mass median aerodynamic diameter (<3.0 µm), which satisfied the requirements for deep lung delivery. CONCLUSION: The proposed approach was suitable for preparation of proliposome DPIs that could be deployed for local targeting of the lower respiratory tract for the treatment of TB.

Safety and Biocompatibility of Mupirocin Nanoparticle-Loaded Hydrogel on Burn Wound in Rat Model.

Mupirocin nanoparticle-loaded hydrogel (MLH) was successfully developed. This study focused on the safety of cell lines and the biocompatibility of MLH for wound healing in rat models. MLH was assessed by an analysis of cytotoxicity and the secretion of inflammatory cytokines in cell lines. The cytocompatibility of MLH was compared with mupirocin ointment on full-thickness burn wounds in rats. The results indicated that MLH and blank hydrogel had no toxicity to human epidermal keratinocytes and human fibroblast cells. MLH inhibited lipopolysaccharide (LPS) activity in macrophage-like cells resulting in low nitric oxide production and reduced inflammatory cytokine production (interleukin (IL)-1ß) compared with a positive control (LPS only). In burn wounds, MLH and hydrogel healed the wound better than the other groups determined by wound contraction, reduced secretion, and the generation of new blood vessels, as well as promotion of hair follicle cells. Better granulation tissue proliferation, less necrosis, and a lower degree of inflammation were found in the MLH and blank hydrogel than in the mupirocin ointment. The hydrogel group reduced the macrophages (CD68) on day 14 at the edge of the wound. On day 28, T cells (CD3), B cells (CD20), and CD68+ cells were concentrated in the deeper subcutaneous tissue. Additionally, the transforming growth factor ß1 (TGF-ß1) concentration and matrix prometalloproteinase-2/tissue inhibitor of metalloproteinases-2 ratio in the MLH and hydrogel groups were less than those in the other groups. The MLH formulation was safe and effective in burn wound healing. Therefore, MLH formulations are promising candidates for further evaluation in clinical trials.

Mucoadhesive film containing α-mangostin shows potential role in oral cancer treatment.

BACKGROUND: Oral cancer is often preceded by a mucosal lesion called an oral potentially malignant disorder (OPMD). Many plant-derived compounds are of value in medicine. The objectives of this study were to develop a soluble mucoadhesive film containing α-mangostin (α-MG), a compound extracted from the peel of mangosteen fruit, and determine its activities against oral cancer cells, against human papillomavirus type 16 (HPV-16) pseudovirus, and its anti-inflammatory properties. METHODS: A soluble mucoadhesive film containing α-MG was prepared. Oral squamous carcinoma cell line (SCC25), murine macrophage cells (RAW264.7), and human gingival fibroblast cell line were cultured. Anticancer activity and viability of SCC25 cells in response to α-MG film solution were determined by MTT assay. HPV-16 pseudovirus was constructed and effects of the film solution on attachment and post-attachment steps of the infection were investigated. Anti-inflammatory activity was assessed by nitric oxide (NO) inhibition. Fibroblast cell migration was determined by in vitro scratch assay. RESULTS: The soluble α-MG film showed cytotoxic effects on SCC25 cells in concentration > 125 µg/ml with IC50 of 152.5 µg/ml. Antiviral activity against HPV-16 pseudovirus was observed at attachment step, but not at post-attachment step. The film also possessed a strong anti-inflammatory effect and promoted wound healing without cytotoxicity. CONCLUSIONS: Mucoadhesive film containing α-MG has a cytotoxic effect on oral squamous carcinoma cell line and an inhibitory effect on HPV-16 pseudovirus at attachment step. The α-MG film also shows a potent anti-inflammatory activity and enhances wound healing. Thus, the soluble α-MG film may have a potential role in treating oral cancer.

Development of nanodispersion-based sildenafil metered-dose inhalers stabilized by poloxamer 188: a potential candidate for the treatment of pulmonary arterial hypertension.

Objectives: This study aims to formulate nanodispersion-based sildenafil metered-dose inhalers (MDIs) by using poloxamer 188 (P188) as a stabilizer; to evaluate their stability, aerosol characteristics, cytotoxicity, and inflammatory effects; and to investigate the effects of P188 on stability and aerosol characteristics of the MDIs. Methods: The stability and uniformity of the formulations were evaluated by high-performance liquid chromatography method. The aerosol characteristics were evaluated by the Next Generation Impactor. The cytotoxicity and inflammatory effects on respiratory epithelial cells and alveolar macrophages were evaluated by MTT assay and TNF-α, IL-1ß, and NO assay, respectively. Results: The optimal formulation was stable and well-uniform after 6 months. The fine particle fraction and mass median aerodynamic diameter (MMAD) of the formulation were 61.9% ± 2.5% and 1.69 ± 0.06 µm, respectively. The formulation was found to be nontoxic to respiratory epithelial cells and did not induce the inflammatory responses of alveolar macrophages. A positive correlation between P188 concentration and MMAD of the MDIs was observed. P188 possesses an ability to prevent the growth of sildenafil citrate monohydrate crystals in the formulations. Conclusions: The findings provided a basis for the development of sildenafil MDI as a potential candidate for the treatment of pulmonary arterial hypertension.

Anti-biofilm properties of a mupirocin spray formulation against Escherichia coli wound infections.

Mupirocin ointment is a widely used topical drug for the treatment of bacterial skin infections. However, ointments have some limitations which motivated the development of a film forming spray of mupirocin. Mupirocin spray (2%) was formulated with Eudragit E100 as a film forming agent and tested for its antibacterial and anti-biofilm activities against Escherichia coli, a skin pathogen causing wound and surgical site infections. Treatment with mupirocin spray resulted in significant antibacterial and anti-biofilm activities (inhibition and disruption) with single spray and sub-actual dose concentrations at par with the commercial ointment concentration. The spray formulation was found to be non-toxic to fibroblast cells and greatly resisted removal from the site of application upon washing, in contrast to the ointment which was significantly removed after a single wash. This is the first study to develop and evaluate a spray formulation for mupirocin that forms a stable thin film for sustained release of the drug.

Evaluation of Proinflammatory Cytokines and Adverse Events in Healthy Volunteers upon Inhalation of Antituberculosis Drugs.

Inhalation therapy is a promising drug delivery approach for tuberculosis treatment. However, there is always concern about the safety of the dosage form by inhalation as it may induce inflammation. Developing a new dosage form for inhalation must include tests for its safety especially for the tumor necrosis factor (TNF)-α and interleukine (IL)-1ß. The safety of four anti-tuberculosis (anti-TB) drugs administered via inhalation was assessed in healthy volunteers. Four anti-TB drugs; isoniazid, rifampicin, pyrazinamide and levofloxacin were prepared as dry powder and evaluated for uniformity of delivered dose and in vitro drug deposition. These four anti-TB dry powder formulations for inhalation met the criteria of uniformity of delivered dose and exhibited suitable size for lung delivery. Forty healthy volunteers were recruited and each was sequentially challenged with isoniazid, rifampicin, pyrazinamide and levofloxacin in different orders. Safety was monitored by measuring the pro-inflammatory cytokines in their sputum, lung function test, blood chemistry and adverse events. This study proves that all four anti-TB dry powders did not provoke inflammatory cytokines and are safe to healthy volunteers.

Monitoring the Interaction Between Solid Lipid Nanoparticles and Alveolar Macrophages Via the Label-Free Technique.

Macrophages are employed as targets for delivering genes, drugs, or lipid nanoparticles into tumors or other specific sites. Studying the interaction between solid lipid nanoparticles (SLNs) and macrophages is essential for assessing nanotoxicity and advancing the development of nanomedicines. However, limited data are currently available on the membrane microstructure and biochemical changes that occur when macrophages interact with SLNs. We conducted a label-free morphological and biochemical investigation of NR8383 macrophages using optical diffraction tomography (ODT), which validated the efficiency of the SLNs as a drug delivery system. ODT provided intracellular holotomography to characterize the macrophages and fluorescence imaging to analyze delivery efficiency. ODT analysis revealed the responses of phagocytic macrophages. Additionally, a quantitative analysis of lipid droplets using refractive indices revealed that, compared with incubation with normal cells, incubation with SLNs significantly increased the lipid droplet volume and surface area. The uptake of SLNs into macrophages resulted in increased cell volume, surface area, and concentration, which indicated greater morphological and biochemical variability in the treated cells than in the control cells. The results suggest that ODT imaging is promising for understanding the intracellular distribution of SLNs and useful for validating the efficacy of delivery of SLNs to macrophages.

Inhalable solid lipid nanoparticles of levofloxacin for potential tuberculosis treatment.

Delivering novel antimycobacterial agents through the pulmonary route using nanoparticle-based systems shows promise for treating diseases like tuberculosis. However, creating dry powder inhaler (DPI) with suitable aerodynamic characteristics while preserving nanostructure integrity and maintaining bioactivity until the active ingredient travels deeply into the lungs is a difficult challenge. We developed DPI formulations containing levofloxacin-loaded solid lipid nanoparticles (SLNs) via spray-drying technique with tailored aerosolization characteristics for effective inhalation therapy. A range of biophysical techniques, including transmission electron microscopy, confocal microscopy, and scanning electron microscopy were used to measure the morphologies and sizes of the spray-dried microparticles that explored both the geometric and aerodynamic properties. Spray drying substantially reduced the particle sizes of the SLNs while preserving their nanostructural integrity and enhancing aerosol dispersion with efficient mucus penetration. Despite a slower uptake rate compared to plain SLNs, the polyethylene glycol modified formulations exhibited enhanced cellular uptake in both A549 and NR8383 cell lines. The percent viability of Mycobacterium bovis had dropped to nearly 0 % by day 5 for both types of SLNs. Interestingly, the levofloxacin-loaded SLNs demonstrated a lower minimum bactericidal concentration (0.25 µg/mL) compared with pure levofloxacin (1 µg/mL), which indicated the formulations have potential as effective treatments for tuberculosis.

Formulation of 1% α-mangostin in orabase gel induces apoptosis in oral squamous cell carcinoma.

BACKGROUND: Plant-derived compounds have chemopreventive properties to be used as alternative medicine. Pericarp of Mangosteen (Garcinia mangostana Linn.), a tropical fruit in Southeast Asia contains a phytochemical α-mangostin (α-MG) that demonstrates potent anticancer effects against various types of cancer. α-MG has been reported to be the most effective agent in human cancer cell lines. The objectives of this study were to develop oral gel formulations containing α-MG and determine their (1) anticancer activity, (2) anti-HPV-16 and antimicrobial activities, (3) nitric oxide (NO) inhibitory activity, and (4) wound healing effect. METHODS: Formulations of oral gel containing α-MG were developed. Anticancer activity on SCC-25 was assessed. Apoptotic induction was determined using flow cytometry technique. Antiviral activity against HPV-16 pseudovirus and antimicrobial activity against S. mutans, P. gingivalis and C. albicans were investigated. NO inhibition was carried out. Fibroblast cell migration was determined by in vitro scratch assay. RESULTS: The formulation of 1% α-MG in orabase gel demonstrated anticancer activity by promoting apoptosis in SCC-25. The induction of apoptotic activity was dose dependent with pronounced effect in late apoptosis. The formulation appeared to reduce cell viability of oral keratinocytes (OKC). At CC50 it showed an inhibition against HPV-16 pseudovirus infection. The formulation had no antimicrobial activity against S. mutans, P. gingivalis and C. albicans. No significant NO inhibitory activity and wound healing effects were found. CONCLUSIONS: 1% α-MG in orabase gel exhibited anticancer activity by inducing apoptosis although low level of cytotoxicity observed in OKC was present. The appropriate carrier for novel nano-particles targeting cancer cells should be further investigated.

Development of a proliposomal pretomanid dry powder inhaler as a novel alternative approach for combating pulmonary tuberculosis.

Multidrug-resistant tuberculosis (MDR-TB) and extensively drug-resistant tuberculosis (XDR-TB) continue as public health concerns. Inhaled drug therapy for TB has substantial benefits in combating the causal agent of TB (Mycobacterium tuberculosis). Pretomanid is a promising candidate in an optional combined regimen for XDR-TB. Pretomanid has demonstrated high potency against M. tuberculosis in both the active and latent phases. Conventional spray drying was used to formulate pretomanid as dry powder inhalers (DPIs) for deep lung delivery using a proliposomal system with a trehalose coarse excipient to enhance the drug solubility. Co-spray drying with L-leucine protected hygroscopic trehalose in formulations and improved powder aerosolization. Higher amounts of L-leucine (40-50 % w/w) resulted in the formation of mesoporous particles with high percentages of drug content and entrapment efficiency. The aerosolized powders demonstrated both geometric and median aerodynamic diameters < 5 µm with > 90 % emitted dose and > 50 % fine particle fraction. Upon reconstitution in simulated physiological fluid, the proliposomes completely converted to liposomes, exhibiting suitable particle sizes (130-300 nm) with stable colloids and improving drug solubility, leading to higher drug dissolution compared to the drug alone. Inhalable pretomanid showed higher antimycobacterial activity than pretomanid alone. The formulations were safe for all broncho-epithelial cell lines and alveolar macrophages, thus indicating their potential suitability for DPIs targeting pulmonary TB.

Insights into the formulation properties, biocompatibility, and permeability of poorly water-soluble methoxyflavones with PEG400 and propylene glycol.

Herein, thermal and non-thermal techniques were used to elucidate the putative physical and chemical interactions between poorly water-soluble Kaempferia methoxyflavones and PEG400/propylene glycol. Additionally, the biocompatibility of methoxyflavone-glycol solutions was evaluated using Caco-2 cells whereas the absorptive transport was investigated by measuring the apparent permeability coefficient (P app) of the methoxyflavones and transepithelial electrical resistance (TEER) of the Caco-2 cell monolayer. Data from differential scanning calorimetry, Fourier-transform infrared (FTIR), and proton nuclear magnetic resonance (1H NMR) spectroscopic analysis revealed physico-chemical compatibility between the three methoxyflavones and PEG400/propylene glycol. Furthermore, PEG400 and propylene glycol solutions of the methoxyflavones were shown to be compatible with Caco-2 cells at pharmacologically effective concentrations. In vitro transport studies across the Caco-2 cell monolayer revealed high P app values of 24.07 × 10-6 to 19.63 × 10-6 cm s-1 for PEG400 solutions of the methoxyflavones. The TEER values of the Caco-2 cell monolayers indicated that the increased drug transport was partly due to increased tight junction openings, but without compromising the epithelial barrier integrity. The good pharmaceutical and biocompatibility profiles, as well as improved transport of the methoxyflavones in PEG400 and propylene glycol solutions, are suggestive of the worthiness of this approach for further consideration pertaining to the development of these drugs into oral liquid dosage forms.

Potential applications of silk sericin, a natural protein from textile industry by-products.

Silk is composed of two major proteins, fibroin (fibrous protein) and sericin (globular, gumming protein). Fibroin has been used in textile manufacturing and for several biomaterial applications, whereas sericin is considered a waste material in the textile industry. Sericin has recently been found to activate the proliferation of several cell-lines and has also shown various biological activities. Sericin can form a gel by itself; however, after mixing with other polymers and cross-linking it can form a film or a scaffold with good characteristics that can be used in the cosmetic and pharmaceutical industries. Sericin is proven to cause no immunological responses, which has resulted in a more acceptable material for biological applications.

Antimicrobial and Anti-inflammatory Effects of α-Mangostin Soluble Film.

Objectives: Plant-derived compounds are a major source of medicinal agents. Common oral diseases, including dental caries, periodontal disease, and candidiasis, are caused by biofilms. The nature of biofilm formations is complex, emphasizing the importance of finding novel products that possess bioactivity against microbes associated with those oral infections. The aims of this study were to determine the antimicrobial activity and antibiofilm formation of α-mangostin (α-MG) soluble film. Materials and Methods: Antimicrobial assays against Streptococcus mutans, Porphyromonas gingivalis, and Candida albicans were performed by identifying the minimal growth inhibition concentration and the minimal bactericidal concentration. Time-killing kinetic studies against the organisms and inhibition of biofilm formation were determined by the broth microdilution method. Human gingival fibroblast cell line and macrophage RAW267.4 cells were cultured, and the cell viability was assessed by the MTT assay. The anti-inflammatory effect of the α-MG film was investigated by measuring the inhibition of nitric oxide production. Results: The α-MG film demonstrated antimicrobial activity against the oral pathogens tested. The formulation reduced microbial growth about 1-3 Log CFU/mL at 2-4 h and complete killing at 24 h. No significant difference in inhibiting the biofilm formation of those three microorganisms was noted. In addition, the film containing α-MG demonstrated anti-inflammatory activity through the inhibition of nitric oxide production in a dose-dependent manner. The formulation was safe and showed no cytotoxicity at therapeutic dose. Conclusions: The α-MG film is effective against S. mutans, P. gingivalis, and C. albicans without significant cytotoxicity in vitro. Thus, this new product may have potential advantage in preventing those common oral infections.

Isoniazid proliposome powders for inhalation-preparation, characterization and cell culture studies.

The aims of this study were to develop proliposome powders containing isoniazid (INH) in a dry powder aerosol form. INH-proliposome powders were prepared by a spray drying method. Proliposome physicochemical properties were determined using cascade impactor, X-ray diffraction and differential scanning calorimetry. The toxicity of proliposomes to respiratory-associated cell lines and its potential to provoke immunological responses from alveolar macrophages (AM) were determined. Free INH and INH-proliposome bioactivities were tested in vitro and in AM infected with Mycobacterium bovis (M. bovis). Aerosolization properties of INH-proliposome powders at 60 L/min, the powders showed mass median aerodynamic diameters of 2.99-4.92 µm, with fine particle fractions (aerosolized particles less than 4.4 µm) of 15-35%. Encapsulation of INH was 18-30%. Proliposome formulations containing INH to mannitol ratios of 4:6 and 6:4 exhibited the greatest overlapping peak between the drug and mannitol. INH-proliposomes were evidently nontoxic to respiratory-associated cells, and did not activate AM to produce inflammatory mediators-including interleukin-1ß (IL-1ß), tumor necrosis factor-α (TNF-α), and nitric oxide-at a toxic level. The efficacy of INH-proliposome against AM infected with M. bovis was significantly higher than that of free INH (p < 0.05). INH-proliposomes are potential candidates for an alternative tuberculosis treatment.

Dental floss impregnated with povidone-iodine coated with Eudragit L-100 as an antimicrobial delivery system against periodontal-associated pathogens.

Introduction. Periodontitis is among the most widespread oral bacterial diseases affecting 15-20% of the world population.Aim. This study aimed to develop dental floss impregnated with povidone-iodine (PVP-I) as an antimicrobial delivery system against periodontopathogenic bacteria in a planktonic form and within biofilms.Methods. Identical lengths of dental floss impregnated with PVP-I formulations were placed on agar along with previously grown periodontal pathogens. The bioactivity of the dental floss was investigated by response-surface methodology. In order to explore the antibacterial activity of the selected formulation and the potential application in the prevention and treatment of plaque-caused diseases such as periodontitis and caries, the antibacterial and anti-biofilm activity of the selected PVP-I formulation against pathogenic bacteria were investigated.Results. The results indicated that the coating formulation containing Eudragit L-100 2.90 %, PVP-I 24.58 % and PEG 400 3.73 % had antimicrobial activity for all pathogens. The mechanism of this formulation involved disruption of bacterial cell membranes. Moreover, this formulation inhibited the formation of oral pathogenic biofilms.Conclusion. It was concluded that Eudragit L-100 and PVP-I-coated dental floss represented a potential therapeutic agent to prevent periodontal diseases and dental caries and exhibited non-toxicity to periodontal ligament cells.

Oral spray containing plant-derived compounds is effective against common oral pathogens.

OBJECTIVES: Plant-derived compounds are a good source of therapeutic agents and inhibitors of inflammatory process. Dental caries, periodontal diseases and candidiasis are common oral infections caused by virulent biofilms. The objectives of this study were to develop oral spray containing plant-derived compounds; α-mangostin (α-MG) and/or lawsone methyl ether (2-methoxy-1,4-naphthoquinone) (LME) and determine its antimicrobial, anti-biofilm, and anti-inflammatory activities. DESIGN: Oral spray formulations were prepared containing α-MG (5 mg/ml) and/or LME (250 µg/ml). Antimicrobial activity against Candida albicans, Streptococcus mutans, and Porphyromonas gingivalis and anti-biofilm formation activities were determined as well as cytotoxicity and anti-inflammatory effects. RESULTS: The oral spray demonstrated antimicrobial activity against all three of the oral pathogens tested with stronger effects on C. albicans and S. mutans than P. gingivalis. The formulation containing α-MG (2.5 mg/ml) and LME (125 ug/ml) reduced growth of the microorganisms about 1-2 Log CFU/ml at 1-3 h and the killing effects were complete at 24 h. Based on biofilm assay, the oral spray containing both α-MG and LME showed greater inhibitory effects than those with α-MG or LME. In addition, the oral spray containing both α-MG and LME demonstrated more inhibition of nitric oxide production than α-MG alone. All the formulations were safe and demonstrated greater anti-inflammatory activity at lower concentration (<6.25 µg/ml) than at a higher concentration. CONCLUSION: Oral spray containing α-MG and/or LME is effective against common oral pathogens without significant cytotoxicity. Thus, it has the potential to prevent the infections and may serve as adjunctive treatment to conventional therapy.

Quantitative analysis of povidone-iodine thin films by X-ray photoelectron spectroscopy and their physicochemical properties.

In this study, povidone-iodine (PVP-I) has been formulated as a topical spray to produce a thin film for the controlled release of I2. By means of experimental design, 27 formulations containing glycerol, ethanol, PEG 400, copovidone and HFA 134a as a propellant were prepared. The pH values of all formulations were in the range of 6-7. The viscosity was within the range of 11.9-85.9 mPa s. The surface tensions were 20.3 to 24.6 mN m-1 and the contact angles were between 19.3 and 38.7°. The assays for the iodine contents were within acceptable range (80-120 %). X-ray photoelectron spectroscopy analysis revealed the ionized form of iodine was much higher than the unionized form. The MIC and MBC values of the PVP-I sprays against Staphylococcus aureus, S. epidermidis and Pseudomonas aeruginosa were higher than that of commercial PVP-I solution. The cytotoxicity study confirmed that the PVP-I spray had lower toxic effects on keratinocytes and fibroblasts compared to the commercial PVP-I solution. The formulation containing 59 % ethanol, 18 % copovidone and 12 % PEG 400 showed good antibacterial activity.