Poly(Sitosterol)-Based Hydrophobic Blocks in Amphiphilic Block Copolymers for the Assembly of Hybrid Vesicles.

Amphiphilic block copolymer and lipids can be assembled into hybrid vesicles (HVs), which are an alternative to liposomes and polymersomes. Block copolymers that have either poly(sitostryl methacrylate) or statistical copolymers of sitosteryl methacrylate and butyl methacrylate as the hydrophobic part and a poly(carboxyethyl acrylate) hydrophilic segment are synthesized and characterized. These block copolymers assemble into small HVs with soybean L-α-phosphatidylcholine (soyPC), confirmed by electron microscopy and small-angle X-ray scattering. The membrane's hybrid nature is illustrated by fluorescence resonance energy transfer between labeled building blocks. The membrane packing, derived from spectra when using Laurdan as an environmentally sensitive fluorescent probe, is comparable between small HVs and the corresponding liposomes with molecular sitosterol, although the former show indications of transmembrane asymmetry. Giant HVs with homogenous distribution of the block copolymers and soyPC in their membranes are assembled using the electroformation method. The lateral diffusion of both building blocks is slowed down in giant HVs with higher block copolymer content, but their permeability toward (6)-carboxy-X-rhodamine is higher compared to giant vesicles made of soyPC and molecular sitosterol. This fundamental effort contributes to the rapidly expanding understanding of the integration of natural membrane constituents with designed synthetic compounds to form hybrid membranes.

Polymer Micelles vs Polymer-Lipid Hybrid Vesicles: A Comparison Using RAW 264.7 Cells.

Bottom-up synthetic biology aims to integrate artificial moieties with living cells and tissues. Here, two types of structural scaffolds for artificial organelles were compared in terms of their ability to interact with macrophage-like murine RAW 264.7 cells. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) was used to assemble micelles and polymer-lipid hybrid vesicles together with 1,2-dioleoyl-sn-glycero-3-phosphocholine or 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) lipids in the latter case. In addition, the pH-sensitive fusogenic peptide GALA was conjugated to the carriers to improve their lysosomal escape ability. All assemblies had low short-term toxicity toward macrophage-like murine RAW 264.7 cells, and the cells internalized both the micelles and hybrid vesicles within 24 h. Assemblies containing DOPE lipids or GALA in their building blocks could escape the lysosomes. However, the intracellular retention of the building blocks was only a few hours in all the cases. Taken together, the provided comparison between two types of potential scaffolds for artificial organelles lays out the fundamental understanding required to advance soft material-based assemblies as intracellular nanoreactors.

Mitochondria Encapsulation in Hydrogel-Based Artificial Cells as ATP Producing Subunits.

Artificial cells (ACs) aim to mimic selected structural and functional features of mammalian cells. In this context, energy generation is an important challenge to be addressed when self-sustained systems are desired. Here, mitochondria isolated from HepG2 cells are employed as natural subunits that facilitate chemically driven adenosine triphosphate (ATP) synthesis. The successful mitochondria isolation is confirmed by monitoring the preserved inner membrane potential, the respiration, and the ATP production ability. The encapsulation of the isolated mitochondria in gelatin-based hydrogels results in similar initial ATP production compared to mitochondria in solution with a sustained ATP production over 24 h. Furthermore, luciferase is coencapsulated with the mitochondria in gelatin-based particles to create ACs and employ the in situ produced ATP to drive the catalytic conversion of d-luciferin. The coencapsulation of luciferase-loaded liposomes with mitochondria in gelatin-based hydrogels is additionally explored where the encapsulation of mitochondria and liposomes resulted in clustering effects that are likely contributing to the functional performance of the active entities. Taken together, mitochondria show potential in cell mimicry to facilitate energy-dependent processes.

Enzyme Mimic Facilitated Artificial Cell to Mammalian Cell Signal Transfer.

Catalyzing biochemical reactions with enzymes and communicating with neighboring cells via chemical signaling are two fundamental cellular features that play a critical role in maintaining the homeostasis of organisms. Herein, we present an artificial enzyme (AE) facilitated signal transfer between artificial cells (ACs) and mammalian HepG2 cells. We synthesize metalloporphyrins (MPs) based AEs that mimic cytochrome P450 enzymes (CYPs) to catalyze a dealkylation and a hydroxylation reaction, exemplified by the conversion of resorufin ethyl ether (REE) to resorufin and coumarin (COU) to 7-hydroxycoumarin (7-HC), respectively. The AEs are immobilized in hydrogels to produce ACs that generate the two diffusive fluorophores, which can diffuse into HepG2 cells and result in dual intracellular emissions. This work highlights the use of AEs to promote AC to mammalian signal transfer, which opens up new opportunities for integrating the synthetic and living world with a bottom-up strategy.

Polymer-Lipid Hybrid Vesicles and Their Interaction with HepG2 Cells.

Polymer-lipid hybrid vesicles are an emerging type of nano-assemblies that show potential as artificial organelles among others. Phospholipids and poly(cholesteryl methacrylate)-block-poly(methionine methacryloyloxyethyl ester (METMA)-random-2-carboxyethyl acrylate (CEA)) labeled with a Förster resonance energy transfer (FRET) reporter pair are used for the assembly of small and giant hybrid vesicles with homogenous distribution of both building blocks in the membrane as confirmed by the FRET effect. These hybrid vesicles have no inherent cytotoxicity when incubated with HepG2 cells up to 1.1 × 1011 hybrid vesicles per mL, and they are internalized by the cells. In contrast to the fluorescent signal originating from the block copolymer, the fluorescent signal coming from the lipids is barely detectable in cells incubated with hybrid vesicles for 6 h followed by 24 h in cell media, suggesting that the two building blocks have a different intracellular fate. These findings provide important insight into the design criteria of artificial organelles with potential structural integrity.

Locomotion of Micromotors Due to Liposome Disintegration.

Synthetic micromotors are evaluated extensively in a range of biomedical, microscale transport, and environmental applications. Fundamental insight into micromotors that exhibit locomotion due to triggered disintegration of their associated liposomes is provided. Directed self-propulsion is observed when the lipid vesicles are solubilized using Triton X-100 (TX) and bile at sufficiently high concentrations. Directional motion, initiated by a propagating TX or bile gradient, is found when using a sufficiently high concentration of solubilization agents. On the other hand, a low bile concentration results in short-term reverse directional motion. The experimental and theoretical considerations offer valid fundamental understanding to complement the list of explored locomotion mechanisms for micromotors.

Phospholipid-Block Copolymer Hybrid Vesicles with Lysosomal Escape Ability.

The success of nanoparticulate formulations in drug delivery depends on various aspects including their toxicity, internalization, and intracellular location. Vesicular assemblies consisting of phospholipids and amphiphilic block copolymers are an emerging platform, which combines the benefits from liposomes and polymersomes while overcoming their challenges. We report the synthesis of poly(cholesteryl methacrylate)- block-poly(2-(dimethylamino) ethyl methacrylate) (pCMA- b-pDMAEMA) block copolymers and their assembly with phospholipids into hybrid vesicles. Their geometry, their ζ-potential, and their ability to adsorb onto polymer-coated surfaces were assessed. Giant unilamellar vesicles were employed to confirm the presence of both the phospholipids and the block copolymer in the same membrane. Furthermore, the cytotoxicity of selected hybrid vesicles was determined in RAW 264.7 mouse macrophages, primary rat Kupffer cells, and human macrophages. The internalization and lysosomal escape ability of the hybrid vesicles were confirmed using RAW 264.7 mouse macrophages. Taken together, our findings illustrate that the reported hybrid vesicles are a promising complementary drug delivery platform for existing liposomes and polymersomes.

Multicompartmentalized Microreactors Containing Nuclei and Catalase-Loaded Liposomes.

Multicompartmentalized microreactors are considered as cell mimics with hierarchical structures inspired by mammalian cells. We report the successful assembly and encapsulation of purified nuclei from RAW 264.7 cells (pNuc) into alginate-based microreactors. We demonstrate the preserved function of nuclei within the microreactors for mRNA production. Further, we load catalase-loaded liposomes (Lcat) into the microreactors to break down hydrogen peroxide (H2O2) into oxygen and water. Assemblies containing both natural pNuc and synthetic Lcat show significantly higher mRNA production in the presence of H2O2 compared to microreactors without Lcat or no H2O2 present, suggesting a beneficial effect of the locally enzymatically produced oxygen for transcription. This novel type of microreactors, containing both natural and synthetic compartments, presents a substantial advancement from assemblies equipped with solely synthetic units and offers opportunities as hypoxia models or for cell-free protein synthesis.

Janus subcompartmentalized microreactors.

We report on Janus subcompartmentalized assemblies with enzyme loaded liposomes entrapped within a polymer carrier capsule - Janus subcompartmentalized microreactors. The concept is based on the use of Pickering emulsions and the subsequent deposition of interacting liposomes and polymer layers. We demonstrate the adjustment of the size of the Janus domains and the control over the amount of trapped liposomes using multiple liposome deposition steps. The obtained Janus capsosomes feature a distinct liposome domain within a closed polymeric hydrogel shell. The assembly of functional Janus microreactors using trypsin as cargo within the liposomal subcompartments is shown by performing locally confined enzymatic encapsulated catalysis. The presented assemblies with spatial control over the position of their liposomal subunits are a fascinating first step towards artificial cells with polarity.

Cell response to PEGylated poly(dopamine) coated liposomes considering shear stress.

BACKGROUND: Liposomes have gained immerse attention in the field of drug delivery as carriers of therapeutic molecules. Their modification with a polymer either to make them stealth (e.g. using PEG) and/or more stable (e.g. using poly(dopamine) (PDA)) is a crucial aspect to improve their performance e.g. the blood circulation time. Despite their potential, there are only a few commercialized liposome-based formulations for intravenous drug delivery. Hence, there is still considerable need to address the challenges involved in the design and characterization of liposomal therapeutics. In the latter case, it is of paramount importance to consider the dynamic in vivo environment, e.g. the interstitial fluidic pressure in tumors, blood flow, or bile flow in the liver. METHODS: The PEGylation of PDA films was characterized by quartz crystal microbalance with dissipation monitoring, and the optimized protocol was used to assemble PEGylated PDA coated liposomes (LPDA_PEG). Dynamic light scattering, a plate reader, a flow cytometer and a cytotoxicity assay were used to characterize the liposomes and quantify cellular association/uptake and cell viability in the presence and absence of shear stress after 30min and 4h. The immortalized skeletal mouse myoblast (C2C12) cell line was chosen as model cancer cells, and a hepatic cell line (HepG2) was selected due to their importance in nanosized drug carrier clearance from the system in the liver. RESULTS: The presence of hydrophilic cargo did not affect the PDA assembly process. In the absence of shear stress, there was no difference in cellular uptake/association of both PDA coated liposomes (LPDA) and LPDA_PEG for hepatocytes while myoblasts preferentially internalized/associated with LPDA. In the presence of shear stress, hepatocytes preferentially internalized/associated with LPDA after 30min, while there was only a significant difference for myoblasts after 4h. The cell viability remained unaffected in all cases. CONCLUSIONS: LPDA_PEG are a promising platform towards drug delivery. The nature of cells and fluidic flow are important factors to be considered in their characterization using cell cultures. GENERAL SIGNIFICANCE: These findings will contribute in the better understanding of polymer coated liposomes with cells. The importance of microfluidics in cell culture based characterization is demonstrated, and this will eventually affect the way advanced drug delivery vehicles are designed and characterized prior to animal experiments.

Biocatalytic polymer coatings: on-demand drug synthesis and localized therapeutic effect under dynamic cell culture conditions.

Biocatalytic surface coatings are prepared herein for localized synthesis of drugs and their on-demand, site-specific delivery to adhering cells. This novel approach is based on the incorporation of an enzyme into multilayered polymer coatings to accomplish enzyme-prodrug therapy (EPT). The build-up of enzyme-containing multilayered coatings is characterized and correlations are drawn between the multilayer film assembly conditions and the enzymatic activity of the resulting coatings. Therapeutic effect elicited by the substrate mediated EPT (SMEPT) strategy is investigated using a prodrug for an anticancer agent, SN-38. The performance of biocatalytic coatings under flow conditions is investigated and it is demonstrated that EPT allows synthesizing the drugs on-demand, at the time desired and in a controllable amount to suit particular applications. Finally, using cells cultured in sequentially connected flow chambers, it is demonstrated that SMEPT affords a site-specific drug delivery, that is, exerts a higher therapeutic effect in cells adhering directly to the biocatalytic coatings than in the cells cultured "downstream". Taken together, these data illustrate biomedical opportunities made possible by engineering tools of EPT into multilayered polymer coatings and present a novel, highly versatile tool for surface mediated drug delivery.

Poly(N-isopropylacrylamide)/poly(dopamine) capsules.

Polymer capsules are an interesting concept considered in nanobiotechnology. Approaches that facilitate their assembly remain sought after. Poly(dopamine) (PDA) has been considered and successfully applied in this context. We recently demonstrated that PDA could be copolymerized with different types of poly(N-isopropylacrylamide) (pNiPAAm) to assemble mixed films on planar substrates. Herein, we transferred this approach onto colloidal substrates and characterized the film thickness depending on the film composition and template particles size. While the membrane of capsules assembled using 5 µm template particles exhibited strong dependency on the film composition, smaller templates led to capsules with similar membrane thickness. We then compared the permeability of different capsules using fluorescently labeled dextran and fluorescein. We found that the permeability of capsules was heavily dependent on the polymer composition and the template particle size. These fundamental findings contribute to the potential of these capsules, assembled in one-step, for biomedical applications.

Magnetic micromotors crossing lipid membranes.

Nano/micromotors are self-propelled particles that show enhanced motion upon being triggered by a stimulus. Their use in nanomedicine has been widely explored, with special focus on imaging or drug delivery. However, a thorough understanding of the requirements for more efficient locomotion is still lacking. In this paper, we assembled magnetically propelled motors of different sizes (i.e., 0.5, 1 and 4 µm) and surface chemistries (positive charge or PEGylated) and assessed their motion in the presence of giant unilamellar lipid vesicles (GUVs) of varying compositions (zwitterionic, negatively charged and saturated lipids). Unexpectedly, the size does not seem to be the dominating characteristics that governs the ability of the motors to cross lipid membranes. Specifically, the 0.5 µm PEGylated motors have very limited ability to cross the lipid membrane of GUVs due to their non-interacting nature compared to their equally sized positively charged counterparts. Furthermore, membranes made of saturated lipids and, in particular, in combination with a weak magnetic field facilitate motors' crossing, regardless of their size. The results were validated by in-house data-driven statistical analysis that employs experimental data to allow for the identification of individual motor motion in the ensemble when meeting the lipid membranes. Altogether, we provide insight into motor locomotion when they interact with a biological barrier considering both the entire ensemble and the individual motors, which has the potential to support considerations of future motor designs.

Antioxidant Microgels Support Peroxide-Challenged Hepatic Cells.

Access to therapeutic strategies that counter cellular stress induced by reactive oxygen species (ROS) is an important, long-standing challenge. Here, the assembly of antioxidant artificial cells is based on alginate hydrogels equipped with non-native catalysts, namely platinum nanoparticles and an EUK compound. These artificial cells are able to preserve the viability and lower the intracellular ROS levels of challenged hepatic cells by removing peroxides from the extracellular environment. Conceptually, this strategy illustrates the potential use of artificial cells with a synthetic catalyst toward long-term support of hepatic cells and potentially other mammalian cells.

Shear stress and its effect on the interaction of myoblast cells with nanosized drug delivery vehicles.

An important aspect to ensure progress in biomedicine is the fundamental understanding of the interaction of cells and tissue with (bio)materials. The consideration of shear stress in drug delivery and/or tissue engineering remains largely unexplored. To illustrate the fundamental relevance, we employ a microfluidic setup to evaluate the myoblast cell response to two prominent drug carrier systems, namely, liposomes and nanoparticles, in the presence of low shear stress. We show that positively charged carriers have an enhanced interaction with myoblast cells in the presence of shear stress. This effect can be translated into improved therapeutic response in terms of reduction in cell viability when delivering a cytotoxic compound or into a better translocation efficiency when using lipoplexes. Taken together, our fundamental findings open up new possibilities in tissue engineering and drug delivery by considering an additional parameter when delivering beneficial compounds.

Assembly of poly(dopamine)/poly(N-isopropylacrylamide) mixed films and their temperature-dependent interaction with proteins, liposomes, and cells.

Many biomedical applications benefit from responsive polymer coatings. The properties of poly(dopamine) (PDA) films can be affected by codepositing dopamine (DA) with the temperature-responsive polymer poly(N-isopropylacrylamide) (pNiPAAm). We characterize the film assembly at 24 and 39 °C using DA and aminated or carboxylated pNiPAAm by a quartz crystal microbalance with dissipation monitoring (QCM-D), X-ray photoelectron spectroscopy, UV-vis, ellipsometry, and atomic force microscopy. It was found that pNiPAAm with both types of end groups are incorporated into the films. We then identified a temperature-dependent adsorption behavior of proteins and liposomes to these PDA and pNiPAAm containing coatings by QCM-D and optical microscopy. Finally, a difference in myoblast cell response was found when these cells were allowed to adhere to these coatings. Taken together, these fundamental findings considerably broaden the potential biomedical applications of PDA films due to the added temperature responsiveness.

Astrocytes in Paper Chips and Their Interaction with Hybrid Vesicles.

The role of astrocytes in brain function has received increased attention lately due to their critical role in brain development and function under physiological and pathophysiological conditions. However, the biological evaluation of soft material nanoparticles in astrocytes remains unexplored. Here, the interaction of crosslinked hybrid vesicles (HVs) and either C8-D1A astrocytes or primary astrocytes cultured in polystyrene tissue culture or floatable paper-based chips is investigated. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) (P1) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine lipids are used for the assembly of HVs with crosslinked membranes. The assemblies show no short-term toxicity towards the C8-D1A astrocytes and the primary astrocytes, and both cell types internalize the HVs when cultured in 2D cell culture. Further, it is demonstrated that both the C8-D1A astrocytes and the primary astrocytes could mature in paper-based chips with preserved calcium signaling and glial fibrillary acidic protein expression. Last, it is confirmed that both types of astrocytes could internalize the HVs when cultured in paper-based chips. These findings lay out a fundamental understanding of the interaction between soft material nanoparticles and astrocytes, even when primary astrocytes are cultured in paper-based chips offering a 3D environment.

Surfaces Coated with Polymer Brushes Work as Carriers for Histidine Ammonia Lyase.

The immobilization of enzymes on solid supports is an important challenge in biotechnology and biomedicine. In contrast to other methods, enzyme deposition in polymer brushes offers the benefit of high protein loading that preserves enzymatic activity in part due to the hydrated 3D environment that is available within the brush structure. The authors equipped planar and colloidal silica surfaces with poly(2-(diethylamino)ethyl methacrylate)-based brushes to immobilize Thermoplasma acidophilum histidine ammonia lyase, and analyzed the amount and activity of the immobilized enzyme. The poly(2-(diethylamino)ethyl methacrylate) brushes are attached to the solid silica supports either via a "grafting-to" or a "grafting-from" method. It is found that the grafting-from method results in higher amounts of deposited polymer and, consequently, higher amounts of Thermoplasma acidophilum histidine ammonia lyase. All polymer brush-modified surfaces show preserved catalytic activity of the deposited Thermoplasma acidophilum histidine ammonia lyase. However, immobilizing the enzyme in polymer brushes using the grafting-from method resulted in twice the enzymatic activity from the grafting-to approach, illustrating a successful enzyme deposition on a solid support.

Assembly of poly(dopamine) films mixed with a nonionic polymer.

Poly(dopamine) (PDA) coatings have recently attracted considerable interest for a variety of applications. Here, we investigate the film deposition of dopamine mixed with a nonionic polymer (i.e., poly(ethylene glycol) (PEG), poly(vinyl alcohol) (PVA), and poly(N-vinyl pyrrolidone) (PVP)) onto silica substrates using X-ray photoelectron spectroscopy and quartz crystal microbalance. Furthermore, we assess the possibility of coating silica colloids to yield polymer capsules and liposomes with these mixtures. We found that mixed PDA/PEG and PDA/PVA films are deposited without the need for a covalent linker such as an amine or thiol. We also discovered the first material, namely, PVP, that can suppress PDA film assembly. These fundamental findings give further insight into PDA film properties and contribute to establish PDA as a widely applicable coating.