Biodegradable Polymers Influence the Effect of Atorvastatin on Human Coronary Artery Cells.

Drug-eluting stents (DES) have reduced in-stent-restenosis drastically. Yet, the stent surface material directly interacts with cascades of biological processes leading to an activation of cellular defense mechanisms. To prevent adverse clinical implications, to date almost every patient with a coronary artery disease is treated with statins. Besides their clinical benefit, statins exert a number of pleiotropic effects on endothelial cells (ECs). Since maintenance of EC function and reduction of uncontrolled smooth muscle cell (SMC) proliferation represents a challenge for new generation DES, we investigated the effect of atorvastatin (ATOR) on human coronary artery cells grown on biodegradable polymers. Our results show a cell type-dependent effect of ATOR on ECs and SMCs. We observed polymer-dependent changes in IC50 values and an altered ATOR-uptake leading to an attenuation of statin-mediated effects on SMC growth. We conclude that the selected biodegradable polymers negatively influence the anti-proliferative effect of ATOR on SMCs. Hence, the process of developing new polymers for DES coating should involve the characterization of material-related changes in mechanisms of drug actions.

Chemical activation and changes in surface morphology of poly(ε-caprolactone) modulate VEGF responsiveness of human endothelial cells.

The high degree of clinical routine in percutaneous transluminal coronary angioplasty (PTCA) with and without stenting has not changed the fact that a large number of coronary heart disease patients are still affected by post-operative complications such as restenosis and thrombosis. Because re-endothelialization is the crucial aspect of wound healing after cardiovascular implant surgery, there is a need for modern biomaterials to aid endothelial cells in their adhesion and functional recovery post-stenting. This study systematically examines the potential of numerous chemical polymer modifications with regard to endothelialization. Poly(ε-caprolactone) (PCL) and its chemically activated forms are investigated in detail, as well as the impact of polymer surface morphology and precoating with matrix protein. Human umbilical vein endothelial cells (HUVECs) are used to characterize endothelial cell responses in terms of in vitro viability and adhesion. As a potential component in drug eluting implants, VEGF is applied as stimulus to boost endothelial cell proliferation on the polymer. In conclusion, plasma chemical activation of PCL combined with VEGF stimulation best enhances in vitro endothelialization. Examining the impact of morphological, chemical and biological modifications of PCL, this study makes an important new contribution towards the existing body of work on polymer endothelialization.

Enhanced hydrolytic degradation of heterografted polyglycidols: phosphonoethylated monoester and polycaprolactone grafts.

Novel biodegradable materials with tunable hydrolytic degradation rate are prepared by grafting of phosphonoethylated polyglycidols with polyesters. First, the hydrolytically degradable polyester grafts are attached to polyglycidols partially grafted with phosphonoethylated diethyl esters through chemical-catalyzed grafting using tin(II) octanoate, then the diethyl ester groups are chemoselectively converted to the corresponding monoester (mixed phosphonate/phosphonic acid) using alkali metal halides. The products are characterized by means of (1)H, (13)C, and (31)P NMR spectroscopy, as well as size-exclusion chromatography and differential scanning calorimetry. The in vitro degradation of the copolymers is studied in phosphate buffered solution at 55 °C. The copolymers are of the same architecture, molecular weight, and crystallinity, only differing in the pendant phosphonate and mixed phosphonate/phosphonic acid groups, respectively. On the basis of mass loss, decrease of the molecular weight, and morphological analysis of the copolymers, the strong impact of mixed phosphonate/phosphonic acid groups on the hydrolytic degradation rate is demonstrated.

In vitro degradation and drug release of a biodegradable tissue adhesive based on functionalized 1,2-ethylene glycol bis(dilactic acid) and chitosan.

Biodegradability and adhesive-associated local drug release are important aspects of research in tissue adhesive development. Therefore, this study focuses on investigating the in vitro degradation and drug release of a tissue adhesive consisting of hexamethylene diisocyanate functionalized 1,2-ethylene glycol bis(dilactic acid) and chitosan chloride. To prevent infections, ciprofloxacin hydrochloride (CPX·HCl) was incorporated into the adhesive. The influence of CPX·HCl on the adhesive reaction and adhesive strength was analyzed by FTIR-ATR-spectroscopy and tensile tests. The CPX·HCl release was investigated by HPLC. The degradation-induced changes at 37 °C were evaluated by gravimetric/morphological analyzes and micro-computer tomography. The antibiotic potential of the CPX·HCl loaded adhesive was determined by agar diffusion tests. The degradation tests revealed a mass loss of about 78 % after 52 weeks. The adhesive reaction velocity and tensile strength were not influenced by CPX·HCl. Using a 2 mg/g CPX·HCl loaded adhesive an inhibition of all tested bacteria was observed.

Development of a micro-mechanical valve in a novel glaucoma implant.

This paper describes methods for design, manufacturing and characterization of a micro-mechanical valve for a novel glaucoma implant. The implant is designed to drain aqueous humour from the anterior chamber of the eye into the suprachoroidal space in case of an elevated intraocular pressure (IOP). In contrast to any existing glaucoma drainage device (GDD), the valve mechanism is located in the anterior chamber and there, surrounded by aqueous humour, immune to fibrosis induced failure. For the prevention of hypotony the micro-mechanical valve is designed to open if the physiological pressure difference between the anterior chamber and the suprachoroidal space in the range of 0.8 mmHg to 3.7 mmHg is exceeded. In particular the work includes: (i) manufacturing and morphological characterization of polymer tubing, (ii) mechanical material testing as basis for (iii) the design of micro-mechanical valves using finite element analysis (FEA), (iv) manufacturing of microstent prototypes including micro-mechanical valves by femtosecond laser micromachining and (v) the experimental fluid-mechanical characterization of the manufactured microstent prototypes with regard to valve opening pressure. The considered materials polyurethane (PUR) and silicone (SIL) exhibit low elastic modulus and high extensibility. The unique valve design enables a low opening pressure of micro-mechanical valves. An ideal valve design for PUR and SIL with an experimentally determined opening pressure of 2 mmHg and 3.7 mmHg is identified. The presented valve approach is suitable for the inhibition of hypotony as a major limitation of today's GDD and will potentially improve the minimally invasive treatment of glaucoma.

Influence of sirolimus-loaded nanoparticles on physiological functions of native human polymorphonuclear neutrophils.

Sirolimus (SRL) is an immunosuppressive agent of high clinical relevance that has been associated with serious side effects. Biodegradable, SRL-loaded poly(d,l-lactide) nanoparticles (SRL-PLA-NPs) are being investigated as a drug delivery system to improve drug targeting. Polymorphonuclear neutrophils (PMNs) are phagocytes for particulate xenobiotics and also important trigger cells of the primary immune response. Therefore, the effects of SRL, SRL-PLA-NPs, and plain PLA-NPs on the viability of human PMNs, their essential functions, and the secretion of relevant cytokines were determined and evaluated with respect to the intracellular concentrations assessed by liquid chromatography-mass spectrometry ultra-trace analysis. For the first time to our knowledge, incorporation of NPs into PMNs was monitored by flow cytometry using fluorescence-labeled NPs. SRL accumulated intracellularly, exceeding therapeutic blood levels by a factor of two to four. Phagocytic activity was promptly reduced but recovered within 3 hours. No other parameters of the PMNs were affected. Hence, PLA-NPs appear suitable as drug carriers for SRL, allowing for better control of drug release. FROM THE CLINICAL EDITOR: This team of authors describe the incorporation of sirolimus loaded florescent NPs into polymorphonuclear neutrophils, a process that has been monitored by flow cytometry utilizing the fluorescent properties of the polymeric NPs. SRL accumulated intracellularly, exceeding therapeutic blood levels by a factor of two to four, resulting in reduced phagocytic activity that recovered within 3 hours.

Development of a specially tailored local drug delivery system for the prevention of fibrosis after insertion of cochlear implants into the inner ear.

A cochlear implant (CI)-associated local drug delivery system based on dexamethasone (DMS) was developed with the purpose to inhibit the growth of fibrotic tissue which influences the signal transmission from the CI to the neurons of the inner ear. For the realization of a targeted DMS delivery the following concepts were combined: modification of the silicone-based electrode carrier by incorporation of DMS and a DMS-containing polymeric coating chemically attached on the surface of the electrode carrier. It was demonstrated that the coated CI showed a high coating stability in a simulated implantation procedure. The in vitro drug release studies in a quasi-stationary model revealed a faster DMS release in the initial phase originating from the DMS-containing coatings and then a lower and sustained DMS release originating from the DMS-loaded silicone carrier. The performed in vitro biocompatibility study confirmed that the released DMS was non-toxic for cultured spiral ganglion cells.

[Drug release of coated dental implant neck region to improve tissue integration]. / Pharmakafreisetzende biodegradierbare Polymerbeschichtung von dentalen Titanimplantaten zur Verbesserung der Weichgewebsintegration.

In order to improve tissue integration, the neck region of dental implants was coated with the biodegradable polymer poly (L-lactide) incorporating tetracycline, ibuprofen and the combination of both drugs using a solvent dip-coating process. Metallographic analysis, light microscopy and electron microscopy were used to detect the thickness range and the surface characteristics of the coatings. Cytotoxicity was evaluated using the tetrazolium colorimetric method with the fibroblast cell line L929. The in vitro drug release was measured in isotonic sodium chloride solution by UV spectroscopy. To explore if drug release is concentration-dependent, the total amount of drug was varied in the coating (20% wt, 30% wt and 40% wt). The results showed a continuous release of the embedded drugs in relevant dosage over a period of 6 months. In contrast to high tetracycline concentrations, high ibuprofen concentrations resulted in a decreased metabolic activity of the L929 fibroblasts.

Response of umbilical cord mesenchymal stromal cells to varying titanium topographical signals.

A wide variety of titanium implant modifications have been developed to improve tissue- or cell-material interactions including bone bonding, implant failure, and contact osteogenesis. Osteogenesis can be stimulated by mechanobiological signals such as topography though translation of in vivo reactions to in vitro bioactivity and stem cell culture data, and vice versa, is challenging. We hypothesized that a systematic in vitro approach comparing clinically well-accepted implant surface topographical modifications could shed light on potential cell biological mechanisms provoked by submicron-, micron- or macrostructured surfaces. In this study, we investigated the response of umbilical cord derived mesenchymal stromal cells (UC-MSCs) to anodized, particle blasted, and plasma sprayed highly porous Plasmapore surfaces, which is known to promote bony ingrowth in vivo. After 21 days, UC-MSCs undergo a morphological shift from a 2D to 3D behavior on micro- or macrostructures visualized by actin-vinculin fluorescence and are able to fill the porous surfaces completely. Cell viability after 7 days was significantly decreased on the micro- and macrostructured surfaces particle blasted and Plasmapore, compared to polished controls. The analysis of osteogenic differentiation under noninduced conditions revealed a significantly elevated ALP activity on Plasmapore, indicating a beneficial effect of this macrostructured surface toward osteogenic differentiation supported by late elevated gene expression of osteopontin evaluated by qPCR. Mineralization as well as in vitro bioactivity was pronounced on anodized surfaces. Our findings point to synergistic implant modification strategies allowing early contact osteogenesis and bone ingrowth for future implant designs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 180-191, 2018.

Surface Modification of Biodegradable Polymers towards Better Biocompatibility and Lower Thrombogenicity.

PURPOSE: Drug-eluting stents (DES) based on permanent polymeric coating matrices have been introduced to overcome the in stent restenosis associated with bare metal stents (BMS). A further step was the development of DES with biodegradable polymeric coatings to address the risk of thrombosis associated with first-generation DES. In this study we evaluate the biocompatibility of biodegradable polymer materials for their potential use as coating matrices for DES or as materials for fully bioabsorbable vascular stents. MATERIALS AND METHODS: Five different polymers, poly(L-lactide) PLLA, poly(D,L-lactide) PDLLA, poly(L-lactide-co-glycolide) P(LLA-co-GA), poly(D,L-lactide-co-glycolide) P(DLLA-co-GA) and poly(L-lactide-co-ε-caprolactone), P(LLA-co-CL) were examined in vitro without and with surface modification. The surface modification of polymers was performed by means of wet-chemical (NaOH and ethylenediamine (EDA)) and plasma-chemical (O2 and NH3) processes. The biocompatibility studies were performed on three different cell types: immortalized mouse fibroblasts (cell line L929), human coronary artery endothelial cells (HCAEC) and human umbilical vein endothelial cells (HUVEC). The biocompatibility was examined quantitatively using in vitro cytotoxicity assay. Cells were investigated immunocytochemically for expression of specific markers, and morphology was visualized using confocal laser scanning (CLSM) and scanning electron (SEM) microscopy. Additionally, polymer surfaces were examined for their thrombogenicity using an established hemocompatibility test. RESULTS: Both endothelial cell types exhibited poor viability and adhesion on all five unmodified polymer surfaces. The biocompatibility of the polymers could be influenced positively by surface modifications. In particular, a reproducible effect was observed for NH3-plasma treatment, which enhanced the cell viability, adhesion and morphology on all five polymeric surfaces. CONCLUSION: Surface modification of polymers can provide a useful approach to enhance their biocompatibility. For clinical application, attempts should be made to stabilize the plasma modification and use it for coupling of biomolecules to accelerate the re-endothelialization of stent surfaces in vivo.

Correlating coating characteristics with the performance of drug-coated balloons--a comparative in vitro investigation of own established hydrogel- and ionic liquid-based coating matrices.

Drug-coated balloons (DCB), which have emerged as a therapeutic alternative to drug-eluting stents in percutaneous cardiovascular intervention, are well described with regard to clinical efficacy and safety within a number of clinical studies. In vitro studies elucidating the correlation between coating additive and DCB performance are however rare but considered important for the understanding of DCB requirements and the improvement of established DCB. In this regard, we examined three different DCB-systems, which were developed in former studies based on the ionic liquid cetylpyridinium salicylate, the body-own hydrogel hyaluronic acid and the pharmaceutically well-established hydrogel polyvinylpyrrolidone, considering coating morphology, coating thickness, drug-loss, drug-transfer to the vessel wall, residual drug-concentration on the balloon surface and entire drug-load during simulated use in an in vitro vessel model. Moreover, we investigated particle release of the different DCB during simulated use and determined the influence of the three coatings on the mechanical behavior of the balloon catheter. We could show that coating characteristics can be indeed correlated with the performance of DCB. For instance, paclitaxel incorporation in the matrix can reduce the drug wash-off and benefit a high drug transfer. Additionally, a thin coating with a smooth surface and high but delayed solubility can reduce drug wash-off and decrease particle burden. As a result, we suggest that it is very important to characterize DCB in terms of mentioned properties in vitro in addition to their clinical efficacy in order to better understand their function and provide more data for the clinicians to improve the tool of DCB in coronary angioplasty.

Development of a novel injectable drug delivery system for subconjunctival glaucoma treatment.

In this study we present the development of an injectable polymeric drug delivery system for subconjunctival treatment of primary open angle glaucoma. The system consists of hyaluronic acid sodium salt (HA), which is commonly used in ophthalmology in anterior segment surgery, and an isocyanate-functionalized 1,2-ethylene glycol bis(dilactic acid) (ELA-NCO). The polymer mixtures with different ratios of HA to ELA-NCO (1/1, 1/4, and 1/10 (v/v)) were investigated for biocompatibility, degradation behavior and applicability as a sustained release system. For the latter, the lipophilic latanoprost ester pro-drug (LA) was incorporated into the HA/ELA-NCO system. In vitro, a sustained LA release over a period of about 60days was achieved. In cell culture experiments, the HA/ELA-NCO (1/1, (v/v)) system was proven to be biocompatible for human and rabbit Tenon's fibroblasts. Examination of in vitro degradation behavior revealed a total mass loss of more than 60% during the observation period of 26weeks. In vivo, LA was continuously released for 152days into rabbit aqueous humor and serum. Histological investigations revealed a marked leuko-lymphocytic infiltration soon after subconjunctival injection. Thereafter, the initial tissue reaction declined concomitantly with a continuous degradation of the polymer, which was completed after 10months. Our study demonstrates the suitability of the polymer resulting from the reaction of HA with ELA-NCO as an injectable local drug delivery system for glaucoma therapy, combining biocompatibility and biodegradability with prolonged drug release.

In vitro and in vivo degradation studies for development of a biodegradable patch based on poly(3-hydroxybutyrate).

For the development of a resorbable gastrointestinal patch, the in vitro degradation of solution-cast films of poly(3-hydroxybutyrate) (PHB), modifications of PHB expected to influence its degradation time, as well a poly(L-lactide) (PLLA) was examined. The molecular weight of pure PHB decreased by one-half after 1 year in buffer solution (pH 7.4, 37 degrees C). Acceleration in molecular weight decrease was observed by blending with atactic PHB, whereas no influence was found with low-molecular weight PHB. Leaching of a water-soluble additive led to a slight acceleration of PHB degradability. In contrast, a deceleration in degradation rate was observed with the addition of a hydrophobic plasticizer. In vitro tests indicated an accelerating effect of pancreatin on PHB degradation, whereas PLLA degradation remained essentially uninfluenced. In comparison to simple hydrolysis, the degradation rate of PHB was accelerated about threefold. From the in vitro results, a PHB/atactic PHB blend was selected for repair of a bowel defect in Wistar rats. A patch film was fabricated by a dipping/leaching method. Twenty-six weeks post-implantation, material remnants were found in only one of four animals. The bowel defects were closed in all cases. It could be assessed that the patch material resists the intestinal secretions for a sufficiently long time but that it finally degrades completely.

Impact of different tissue-simulating hydrogel compartments on in vitro release and distribution from drug-eluting stents.

In vitro drug release testing is an appropriate approach to identify critical parameters helping to predict drug release from drug-eluting stents (DES) prior to studying drug release behavior under in vivo conditions. Drug release and distribution from DES coated with a fluorescent model substance were studied in vitro using the vessel-simulating flow-through cell equipped with different long-term stable hydrogel compartments composed of agarose, polyacrylamide or poly(vinyl alcohol). The obtained experimental results were compared with the results of finite-element modeling obtained using experimentally determined diffusion coefficients and partition coefficients. In spite of differences regarding these parameters, experimental and mathematical data yielded only minor differences between the different gels regarding the release and distribution behavior and reasonable agreement between the modeling and the experiment was obtained. In an attempt to further elucidate the dosage form behavior, the diffusion coefficients in the gel as well as in the stent coating were systematically varied in the finite-element model. Changes in the diffusivity in the stent coating mainly impacted on the initial concentrations. Slower diffusion inside the hydrogel yielded a retarded elution from the stent coating and a higher model substance accumulation in the gel compartment at late time points.

New stent surface materials: the impact of polymer-dependent interactions of human endothelial cells, smooth muscle cells, and platelets.

Despite the development of new coronary stent technologies, in-stent restenosis and stent thrombosis are still clinically relevant. Interactions of blood and tissue cells with the implanted material may represent an important cause of these side effects. We hypothesize material-dependent interaction of blood and tissue cells. The aim of this study is accordingly to investigate the impact of vascular endothelial cells, smooth muscle cells and platelets with various biodegradable polymers to identify a stent coating or platform material that demonstrates excellent endothelial-cell-supportive and non-thrombogenic properties. Human umbilical venous endothelial cells, human coronary arterial endothelial cells and human coronary arterial smooth muscle cells were cultivated on the surfaces of two established biostable polymers used for drug-eluting stents, namely poly(ethylene-co-vinylacetate) (PEVA) and poly(butyl methacrylate) (PBMA). We compared these polymers to new biodegradable polyesters poly(l-lactide) (PLLA), poly(3-hydroxybutyrate) (P(3HB)), poly(4-hydroxybutyrate) (P(4HB)) and a polymeric blend of PLLA/P(4HB) in a ratio of 78/22% (w/w). Biocompatibility tests were performed under static and dynamic conditions. Measurement of cell proliferation, viability, glycocalix width, eNOS and PECAM-1 mRNA expression revealed strong material dependency among the six polymer samples investigated. Only the polymeric blend of PLLA/P(4HB) achieved excellent endothelial markers of biocompatibility. Data show that PLLA and P(4HB) tend to a more thrombotic response, whereas the polymer blend is characterized by a lower thrombotic potential. These data demonstrate material-dependent endothelialization, smooth muscle cell growth and thrombogenicity. Although polymers such as PEVA and PBMA are already commonly used for vascular implants, they did not sufficiently meet the criteria for biocompatibility. The investigated biodegradable polymeric blend PLLA/P(4HB) evidently represents a promising material for vascular stents and stent coatings.

Site-selective immobilization of anti-CD34 antibodies to poly(l-lactide) for endovascular implant surfaces.

Aiming at a speed up of the re-endothelialization process of biodegradable endovascular implants, novel approaches for the functionalization of poly(l-lactide) (PLLA) with anti-CD34 antibodies were established. We propose a three-step process involving PLLA surface activation with functional amino groups, attachment of a protein repelling peptide spacer, and covalent random or site-selective immobilization of the antibodies. Obtainable antibody surface densities and antigen binding capacities were thoroughly evaluated by means of enzyme-linked immunosorbent assay. Results indicate that a lower amount of anchoring sites on the antibody favors high coupling efficiency, while localization of the anchoring sites, facing the antigen binding moiety, strongly enhances the antigen capture capacity of the support. Besides minimization of physisorption and cell adhesion exemplarily shown with bovine serum albumin, avidin, and human umbilical vein endothelial cells, respectively, the inclusion of the protein-repelling spacer strengthened this effect, yielding antigen capture capacities exceeding values so far reported in literature. In contrast, the number of amino groups on the PLLA surfaces, which is indeed highly dependent on the applied activation procedure, does not seem to influence antibody coupling efficiency and antigen capture capacity considerably. This allows the choice of surface activation treatment, plasma or wet-chemical, regarding other processing parameters as for instance sterilizability or favored modification depth.

Novel paclitaxel-coated angioplasty balloon catheter based on cetylpyridinium salicylate: preparation, characterization and simulated use in an in vitro vessel model.

Drug-coated balloons (DCB), which have emerged as therapeutic alternative to drug-eluting stents in percutaneous cardiovascular intervention, are well described with regard to clinical efficiency and safety within a number of clinical studies. In vitro studies elucidating the correlation of coating method and composition with DCB performance are however rare but considered important for the understanding of DCB requirements and the improvement of established DCB. In this context, we evaluated the applicability of a pipetting, dip-coating, and spray-coating process for the establishment of DCB based on paclitaxel (PTX) and the ionic liquid cetylpyridinium salicylate (Cetpyrsal) as novel innovative additive in three different compositions. Among tested methods and compositions, the pipetting process with 50 wt.% PTX resulted in most promising coatings as drug load was less controllable by the other processes and higher PTX contents led to considerable drug crystallization, as visualized by electron microscopy, accelerating PTX loss during short-term elution. Applying these conditions, homogeneous coatings could be applied on balloon catheter, whose simulated use in an in vitro vessel model revealed percental drug losses of 36 and 28% during transit and percental drug transfers of 12 and 40% under expansion for coatings applied in expanded and folded balloon condition, respectively. In comparison to literature values, these results support the high potential of Cetpyrsal as novel DCB matrix regarding low drug loss and efficient drug transfer.

Permeability of the anterior lens capsule for large molecules and small drugs.

PURPOSE: For developing injectable lenses the retention properties of the capsular bag are important. Therefore the apparent permeability coefficients of sodium fluorescein and fluorescent dextrans of different sizes were determined for the human anterior lens capsule to calculate a molecular weight cutoff from these data. In addition, permeability coefficients of drugs helpful for the suppression of secondary cataract were determined. MATERIALS AND METHODS: Capsulorhexis specimens were fixed in a specially designed two compartment diffusion chamber to investigate the permeation of sodium fluorescein and fluorescent dextrans of different sizes (10, 40, 70 and 150 kDa) for 24 h (n ≥ 3) and of the antiproliferative drugs actinomycin D and methotrexate for 0.5, 24, 48 and 72 h (n ≥ 3). RESULTS: The molecular weight cutoff of the anterior lens capsule was found to be 166 ± 82 kDa. After 0.5 h, no passage of actinomycin D and methotrexate was detectable through the lens capsule. The apparent permeability coefficients for actinomycin D and methotrexate were calculated to 0.71 ± 0.02 µm/s and to 0.80 ± 0.13 µm/s, respectively. CONCLUSIONS: The capsular bag retains fluorescent dextrans with a molecular weight of >166 kDa. Hence, prepolymers are required to polymerize rapidly to be retained inside of the capsular bag. In addition, low-molecular substances intended as antiproliferative drugs for secondary cataract prevention should be applied within a time frame of five minutes in such a way that cells adjacent to the capsular bag will not be damaged.

Implant-associated local drug delivery systems based on biodegradable polymers: customized designs for different medical applications.

Implants providing controlled, local release of active substances are of interest in different medical applications. Therefore, the focus of the present article is the development of implant-associated diffusion- or chemically controlled local drug delivery (LDD) systems based on biodegradable polymeric drug carriers. In this context, we provide new data and review our own recently published data concerning the drug release behavior of diffusion-controlled LDD systems in relation to the kind of polymer, drug content, coating mass/thickness, and layer composition. We demonstrate that polymers allow a wide range of control over the drug release characteristics. In this regard, we show that the glass transition temperature of a polymer has an impact on its drug release. Additionally, the blending of hydrophobic, semicrystalline polymers with amorphous polymers leads to an increase in the rate of drug release compared with the pure semicrystalline polymer. Moreover, the percentage loading of the embedded drug has a considerable effect on the rate and duration of drug release. Furthermore, we discuss chemically controlled LDD systems designed for the release of biomolecules, such as growth factors, as well as nanoparticle-mediated LDD systems. With our own published data on drug-eluting stents, microstents, and cochlear implants, we highlight exemplary implant-associated LDD systems designed to improve implant performance through the reduction of undesirable effects such as in-stent restenosis and fibrosis.

In vitro determination of drug transfer from drug-coated balloons.

Drug-coated balloons are medical devices designed to locally deliver drug to diseased segments of the vessel wall. For these dosage forms, drug transfer to the vessel wall needs to be examined in detail, since drug released into the blood is cleared from the site. In order to examine drug transfer, a new in vitro setup was developed combining the estimation of drug loss during advancement to the site of application in a model coronary artery pathway with a hydrogel compartment representing, as a very simplified model, the vessel wall. The transfer of fluorescent model substances as well as the drug paclitaxel from coated balloons to the simulated vessel wall was evaluated using this method. The model was suitable to quantify the fractions transferred to the hydrogel and also to qualitatively assess distribution patterns in the hydrogel film. In the case of fluorescein sodium, rhodamin b and paclitaxel, vast amounts of the coated substance were lost during the simulated passage and only very small fractions of about 1% of the total load were transferred to the gel. This must be attributed to good water solubility of the fluorescent substances and the mechanical instability of the paclitaxel coating. Transfer of the hydrophobic model substance triamterene was however nearly unaffected by the preliminary tracking procedure with transferred fractions ranging from 8% to 14%. Analysis of model substance distribution yielded inhomogeneous distributions indicating that the coating was not evenly distributed on the balloon surface and that a great fraction of the coating liquid did not penetrate the folds of the balloon. This finding is contradictory to the generally accepted assumption of a drug depot inside the folds and emphasizes the necessity to thoroughly characterize in vitro performance of drug-coated balloons to support the very promising clinical data.