Hypercrosslinked Polymer Gels as a Synthetic Hybridization Platform for Designing Versatile Molecular Separators.

Hypercrosslinked polymers (HCPs), amorphous microporous three-dimensional networks based on covalent linkage of organic building blocks, are a promising class of materials due to their high surface area and easy functionalization; however, this type of material lacks processability due to its network rigidity based on covalent crosslinking. Indeed, the development of strategies to improve its solution processability for broader applications remains challenging. Although HCPs have similar three-dimensionally crosslinked networks to polymer gels, HCPs usually do not form gels but insoluble powders. Herein, we report the synthesis of HCP gels from a thermally induced polymerization of a tetrahedral monomer, which undergoes consecutive solubilization, covalent bond formation, colloidal formation, followed by their aggregation and percolation to yield a hierarchically porous network. The resulting gels feature concentration-dependent hierarchical porosities and mechanical stiffness. Furthermore, these HCP gels can be used as a platform to achieve molecular-level hybridization with a two-dimensional polymer during the HCP gel formation. This method provides functional gels and corresponding aerogels with the enhancement of porosities and mechanical stiffness. Used in column- and membrane-based molecular separation systems, the hybrid gels exhibited a separation of water contaminants with the efficiency of 97.9 and 98.6% for methylene blue and KMnO4, respectively. This result demonstrated the potentials of the HCP gels and their hybrid derivatives in separation systems requiring macroscopic scaffolds with hierarchical porosity.

Supramolecular Deconstruction of Bamboo Holocellulose via Hydrothermal Treatment for Highly Efficient Enzymatic Conversion at Low Enzyme Dosage.

Hydrothermal pretreatment (HTP) has long been considered as an efficient and green treatment process on lignocellulosic biomass for bioconversion. However, the variations of cellulose supramolecular structures during HTP as well as their effects on subsequent enzymatic conversion are less understood. In this work, bamboo holocellulose with well-connected cellulose and hemicelluloses polysaccharides were hydrothermally treated under various temperatures. Chemical, morphological, and crystal structural determinations were performed systematically by a series of advanced characterizations. Xylan was degraded to xylooligosaccharides in the hydrolyzates accompanied by the reduced degree of polymerization for cellulose. Cellulose crystallites were found to swell anisotropically, despite the limited decrystallization by HTP. Hydrogen bond linkages between cellulose molecular chains were weakened due to above chemical and crystal variations, which therefore swelled, loosened, and separated the condensed cellulose microfibrils. Samples after HTP present notably increased surface area, favoring the adsorption and subsequent hydrolysis by cellulase enzymes. A satisfying enzymatic conversion yield (>85%) at rather low cellulase enzyme dosage (10 FPU/g glucan) was obtained, which would indicate new understandings on the green and efficient bioconversion process on lignocellulosic biomass.

Effect of Capecitabine Maintenance Therapy Using Lower Dosage and Higher Frequency vs Observation on Disease-Free Survival Among Patients With Early-Stage Triple-Negative Breast Cancer Who Had Received Standard Treatment: The SYSUCC-001 Randomized Clinical Trial.

Importance: Among all subtypes of breast cancer, triple-negative breast cancer has a relatively high relapse rate and poor outcome after standard treatment. Effective strategies to reduce the risk of relapse and death are needed. Objective: To evaluate the efficacy and adverse effects of low-dose capecitabine maintenance after standard adjuvant chemotherapy in early-stage triple-negative breast cancer. Design, Setting, and Participants: Randomized clinical trial conducted at 13 academic centers and clinical sites in China from April 2010 to December 2016 and final date of follow-up was April 30, 2020. Patients (n = 443) had early-stage triple-negative breast cancer and had completed standard adjuvant chemotherapy. Interventions: Eligible patients were randomized 1:1 to receive capecitabine (n = 222) at a dose of 650 mg/m2 twice a day by mouth for 1 year without interruption or to observation (n = 221) after completion of standard adjuvant chemotherapy. Main Outcomes and Measures: The primary end point was disease-free survival. Secondary end points included distant disease-free survival, overall survival, locoregional recurrence-free survival, and adverse events. Results: Among 443 women who were randomized, 434 were included in the full analysis set (mean [SD] age, 46 [9.9] years; T1/T2 stage, 93.1%; node-negative, 61.8%) (98.0% completed the trial). After a median follow-up of 61 months (interquartile range, 44-82), 94 events were observed, including 38 events (37 recurrences and 32 deaths) in the capecitabine group and 56 events (56 recurrences and 40 deaths) in the observation group. The estimated 5-year disease-free survival was 82.8% in the capecitabine group and 73.0% in the observation group (hazard ratio [HR] for risk of recurrence or death, 0.64 [95% CI, 0.42-0.95]; P = .03). In the capecitabine group vs the observation group, the estimated 5-year distant disease-free survival was 85.8% vs 75.8% (HR for risk of distant metastasis or death, 0.60 [95% CI, 0.38-0.92]; P = .02), the estimated 5-year overall survival was 85.5% vs 81.3% (HR for risk of death, 0.75 [95% CI, 0.47-1.19]; P = .22), and the estimated 5-year locoregional recurrence-free survival was 85.0% vs 80.8% (HR for risk of locoregional recurrence or death, 0.72 [95% CI, 0.46-1.13]; P = .15). The most common capecitabine-related adverse event was hand-foot syndrome (45.2%), with 7.7% of patients experiencing a grade 3 event. Conclusions and Relevance: Among women with early-stage triple-negative breast cancer who received standard adjuvant treatment, low-dose capecitabine maintenance therapy for 1 year, compared with observation, resulted in significantly improved 5-year disease-free survival. Trial Registration: ClinicalTrials.gov Identifier: NCT01112826.

Effect of CAD-CAM ceramic materials on the color match of veneer restorations.

STATEMENT OF PROBLEM: With the different translucency levels and types of computer-aided design and computer-aided manufacturing (CAD-CAM) ceramic materials, choosing the most appropriate CAD-CAM ceramic materials to better reproduce the color appearance of natural teeth can be challenging. PURPOSE: The purpose of this in vitro study was to analyze the color differences between natural teeth and milled veneers fabricated with the different types of CAD-CAM ceramic materials. MATERIAL AND METHODS: Ten extracted maxillary central incisor teeth with the A2 shade in the body region were prepared for ceramic veneers. The veneer restorations were designed by using the duplicating method and fabricated from 9 milling blocks (IPS e.max CAD HT/LT, Lava Ultimate CAD HT/LT, VITA SUPRINITY HT/T, IPS Empress CAD HT/LT/Multi) in a dental milling unit (n=10). The bonding surface of the abutment tooth was coated with a thin layer of a separating agent, and the veneer specimen with resin cement was then bonded to the corresponding abutment tooth. A clinical spectrophotometer was used to measure the Commission Internationale de l'Eclairage Lab values of natural teeth, abutment teeth, and milled veneers in the cervical, body, and incisal regions. Color differences between the natural tooth and A2 shade tab (ΔE1) and between the milled veneer and natural tooth (ΔE2) were calculated. The ΔE2 values were compared with the perceptibility threshold (ΔE=2.6) and acceptability threshold (ΔE=5.5). The paired-samples t test, 1-way analysis of covariance, and 2-way ANOVA were used to analyze data (α=.05). RESULTS: The results of 1-way analysis of covariance showed that ceramic materials significantly affected the a∗ and b∗ values of the milled veneers (P<.001) but did not affect the L∗ values of the milled veneers (P>.05). The results of 2-way ANOVA indicated that the ΔE2 values were not significantly affected by different CAD-CAM ceramic materials (F=1.560, P=.138), while statistically significant differences were found in the veneer regions (F=6.588, P=.002). The ΔE2 values ranged from 2.41 to 5.36, less than the clinically acceptable color threshold of 5.5. CONCLUSIONS: The color parameters of milled veneers were affected by the different types of CAD-CAM ceramic materials. The color of the veneer restoration was able to match that of the natural tooth.

Computer-Aided Formulation Design for a Highly Soluble Lutein-Cyclodextrin Multiple-Component Delivery System.

Cyclodextrin (CD) complexation is widely used for the solubilization of poorly soluble drugs in the pharmaceutical industry. Current research was to develop a highly soluble lutein-cyclodextrin multiple-component delivery system (lutein-CD-MCDS) by combined modeling and experimental approaches. Both phase solubility diagram and molecular dynamics (MD) simulation results revealed that the interactions between lutein and CDs were very weak, which confirmed the insignificant solubility improvement of lutein-CD binary system. On the basis of theoretical calculation and preliminary CD studies, lutein-CD-MCDS was developed with over 400-fold solubility improvement after formulation screening. MD simulation indicated that the auxiliary polymers of TWEEN 80 and poloxamer 188 in the lutein-CD-MCDS introduced bridged interaction between lutein and γ-CD to increase the solubility, dissolution rate, and stability of the complex. The lutein-CD-MCDS was characterized by in vitro dissolution test, differential scanning colorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and powder X-ray diffraction (PXRD). Moreover, lutein-CD-MCDS had significantly higher uptake in Caco-2 cells than free lutein. The relative bioavailability of the lutein-CD-MCDS increased to 6.6-fold compared to pure lutein, and to 1.2-fold compared with commercial lutein soft capsules. In conclusion, the highly soluble lutein-CD-MCDS with significant improvement in both the solubility and bioavailability was developed and characterized by combined modeling and experimental approaches. Our research indicates that computer-aided formulation design is a promising approach for future formulation development.

A Microfluidic Love-Wave Biosensing Device for PSA Detection Based on an Aptamer Beacon Probe.

A label-free and selective aptamer beacon-based Love-wave biosensing device was developed for prostate specific antigen (PSA) detection. The device consists of the following parts: LiTaO3 substrate with SiO2 film as wave guide layer, two set of inter-digital transducers (IDT), gold film for immobilization of the biorecongniton layer and a polydimethylsiloxane (PDMS) microfluidic channels. DNA aptamer, or "artificial antibody", was used as the specific biorecognition probe for PSA capture. Some nucleotides were added to the 3'-end of the aptamer to form a duplex with the 3'-end, turning the aptamer into an aptamer-beacon. Taking advantage of the selective target-induced assembly changes arising from the "aptamer beacon", highly selective and specific detection of PSA was achieved. Furthermore, PDMS microfluidic channels were designed and fabricated to realize automated quantitative sample injection. After optimization of the experimental conditions, the established device showed good performance for PSA detection between 10 ng/mL to 1 µg/mL, with a detection limit of 10 ng/mL. The proposed sensor might be a promising alternative for point of care diagnostics.

Oxidation of bromophenols and formation of brominated polymeric products of concern during water treatment with potassium permanganate.

The extensive use of bromophenols (BrPs) in industrial products leads to their occurrence in freshwater environments. This study explored the oxidation kinetics of several BrPs (i.e., 2-BrP, 3-BrP, 4-BrP, 2,4-diBrP, and 2,6-diBrP) and potential formation of brominated polymeric products of concern during water treatment with potassium permanganate [Mn(VII)]. These BrPs exhibited appreciable reactivity toward Mn(VII) with the maxima of second-order rate constants (kMn(VII)) at pH near their pKa values, producing bell-shaped pH-rate profiles. The unusual pH-dependency of kMn(VII) was reasonably explained by a tentative reaction model, where the formation of an intermediate between Mn(VII) and dissociated BrP was likely involved. A novel and powerful precursor ion scan (PIS) approach was used for selective detection of brominated oxidation products by liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry. Results showed that brominated dimeric products such as hydroxylated polybrominated diphenyl ethers (OH-PBDEs) and hydroxylated polybrominated biphenyls (OH-PBBs) were readily produced. For instance, 2'-OH-BDE-68, one of the most naturally abundant OH-PBDEs, could be formed at a relatively high yield possibly via the coupling between bromophenoxyl radicals generated from the one-electron oxidation of 2,4-diBrP by Mn(VII). Given the altered or enhanced toxicological effects of these brominated polymeric products compared to the BrP precursors, it is important to better understand their reactivity and fate before Mn(VII) is applied by water utilities for the oxidative treatment of BrP-containing waters.

Development and Application of a Duplex RT-RPA Assay for the Simultaneous Detection of Cymbidium mosaic virus and Odontoglossum ringspot virus.

Cymbidium mosaic virus (CymMV) and Odontoglossum ringspot virus (ORSV) are among the world's most serious and widespread orchid viruses; they often infect orchids, causing devastating losses to the orchid industry. Therefore, it is critical to establish a method that can rapidly and accurately detect viruses in the field using simple instruments, which will largely reduce the further spread of viruses and improve the quality of the orchid industry and is suitable for mass promotion and application at grassroots agrotechnical service points. In this investigation, we established a rapid amplification method for virus detection at 39 °C for 35 min to detect the presence of CymMV and ORSV simultaneously, sensitively, and specifically in orchids. Primers for the capsid protein (CP)-encoding genes of both viruses were designed and screened, and the reaction conditions were optimized. The experimental amplification process was completed in just 35 min at 39 °C. There were no instances of nonspecific amplification observed when nine other viruses were present. The RPA approach had detection limits of 104 and 103 copies for pMD19T-CymMV and pMD19T-ORSV, respectively. Moreover, the duplex RT-RPA investigation confirmed sensitivity and accuracy via a comparison of detection results from 20 field samples with those of a gene chip. This study presents a precise and reliable detection method for CymMV and ORSV using RT-RPA. The results demonstrate the potential of this method for rapid virus detection. It is evident that this method could have practical applications in virus detection processes.

Pediatric spindle cell/sclerosing rhabdomyosarcoma with FUS-TFCP2 fusion: a case report and literature review.

Background: FUS-TFCP2 gene fusion is a recently identified and highly distinct molecular subtype of spindle cell/sclerosing rhabdomyosarcoma (RMS), with fewer than 40 cases being reported to date. Due to its low incidence, clinical studies on this subtype are limited. Here, we report a new case of this rare entity to describe and summarize its unique clinical characteristics and treatment process, aiming to emphasize the importance of molecular testing for spindle cell/sclerosing RMS and increase the understanding of this subtype. By summarizing and comparing with previous reports on RMS with the EWSR1/FUS-TFCP2 fusion mutation, we hope to make some new hints for its management. Case Description: In this report, we describe a rare case of spindle cell/sclerosing RMS in a 13-year-old boy, who had a massive destructive lesion involving the mandible. Next-generation sequencing of tumor tissue revealing a FUS-TFCP2 fusion. The tumor was extremely aggressive and showed resistance to polychemotherapy, after 4 cycles of multi drug combined chemotherapy, the primary tumor still continued to grow, and suspicious chest metastasis occurred. Even after aggressive total resection of the primary tumor and postoperative chemotherapy, systemic metastasis to the vertebra and chest could not be prevented yet, ultimately with a fatal outcome within 6 months. We additionally summarize 37 cases of RMS with the EWSR1/FUS-TFCP2 fusion mutation reported in the literature. This subtype was found to be almost exclusively primary in bone and histologically showed a common origin of epithelium and muscle. The high aggressiveness made the conventional standard chemoradiotherapy ineffective. Because most tumors of this subtype express ALK protein, ALK inhibitors seem to be a new target for its therapy. Conclusions: Spindle cell/sclerosing RMS with FUS-TFCP2 fusion has its unique clinical characteristics and progression. It shows a marked skeletal predilection and an aggressive clinical course, typically resistant to traditional standard treatments for RMS. Therefore, molecular detection is crucial in managing this subtype. Once the diagnosis is clear, a more aggressive treatment plan is needed. In addition, almost all cases were found to have a positive expression of ALK. So ALK inhibitors can be a choice of targeted therapy.

Effects of nanoplastic exposure routes on leaf decomposition in streams.

Polystyrene nanoparticles (PS NPs) released from plastic products have been demonstrated to pose a threat to leaf litter decomposition in streams. Given the multitrophic systems of species interactions, the effects of PS NPs through different exposure routes on ecosystem functioning remain unclear. Especially dietary exposure, a frequently overlooked pathway leading to toxicity, deserves more attention. A microcosm experiment was conducted in this study to assess the effects of waterborne and dietary exposure to PS NPs on the litter-based food chain involving leaves, microbial decomposers, and detritivores (river snails). Compared to waterborne contamination, dietary contamination resulted in lower microbial enzyme activities and a significantly higher decrease in the lipid content of leaves. For river snails, their antioxidant activity was significantly increased by 20.21%-69.93%, and their leaf consumption rate was significantly reduced by 16.60% through the dietary route due to the lower lipid content of leaves. Besides, the significantly decreased nutritional quality of river snails would negatively influence their palatability to predators. The findings of this study indicate that dietary exposure to PS NPs significantly impacts microbial and detritivore activities, thus affecting their functions in the detritus food chain as well as nutrient cycling.

A systematic review of risk factors during first year of life for early childhood caries.

BACKGROUND: Early childhood caries (ECC) describes dental caries affecting children aged 0-71 months. Current research suggests ECC has important aetiological bases during the first year of life. Gaps in knowledge about disease progression prevent the effective and early identification of 'at risk' children. AIM: To conduct a systematic review of research studies focusing on (a) acquisition and colonization of oral bacteria and ECC and (b) risk and/or protective factors in infants aged 0-12 months. DESIGN: Ovid Medline and Embase databases (1996-2011) were searched for RCT, longitudinal, cross-sectional and qualitative studies. Two investigators undertook a quality assessment for risk of bias. RESULTS: Inclusion criteria were met for (a) by four papers and for (b) by 13 papers; five papers were rated medium or high quality. Bacterial acquisition/colonization and modifying factor interrelationships were identified, but their role in the caries process was not clarified. Key risk indicators were infant feeding practices (nine papers), maternal circumstances and oral health (6) and infant-related oral health behaviours (4). CONCLUSION: This review confirmed that factors occurring during the first year of life affect ECC experience. Despite heterogeneity, findings indicated maternal factors influence bacterial acquisition, whereas colonization was mediated by oral health behaviours and practices and feeding habits.

Injectable Tissue-Adhesive Hydrogel for Photothermal/Chemodynamic Synergistic Antibacterial and Wound Healing Promotion.

It is an exigent need for the development of hydrogel dressings with desirable injectability, good adhesive, antibacterial, and wound healing promotion properties. Herein, the multifunctional injectable hydrogels with good tissue adhesion are designed based on Ag-doped Mo2C-derived polyoxometalate (AgPOM) nanoparticles, urea, gelatin, and tea polyphenols (TPs) for antibacterial and wound healing acceleration. After being injected into the tissue, urea diffuses out under the concentration gradient, and TPs and gelatin chains recombine to trigger the in situ formation of hydrogel with excellent adhesiveness. AgPOM fixed in the hydrogel could not only react with hydrogen peroxide in the infection site to generate singlet oxygen to kill the bacteria but also convert near-infrared light into heat under 1060 nm laser irradiation to realize sterilization. In vitro studies display the high bactericidal ability of the hydrogel against drug-resistant Staphylococcus aureus and also exhibit a prominent therapeutic effect on infected wounds through synergistic photothermal/chemodynamic therapy and accelerate wound healing. Hence, the injectable hydrogel with AgPOM as the antimicrobial agent can be a novel therapeutic agent for drug-resistant bacteria-infected wounds and wound healing promotion.

[Percutaneous kyphoplasty assisted by three dimensional printing percutaneous guide plate for the treatment of osteoporotic vertebral compression fractures].

OBJECTIVE: To verify the safety of three dimensional printing percutaneous guide plate assisted percutaneous kyphoplasty(PKP) in the treatment of osteoporotic vertebral compression fractures(OVCFs). METHODS: The clinical data of 60 patients with OVCFs treated by PKP from November 2020 to August 2021 were retrospectively analyzed. There were 24 males and 36 females, aged from 72 to 86 years old with an average of (76.5±7.9) years. Routine percutaneous kyphoplasty was performed in 30 cases (conventional group) and three dimensional printing percutaneous guide plate assisted PKP was performed in 30 cases (guide plate group). Intraoperative pedicle puncture time (puncture needle to posterior vertebral body edge) and number of fluoroscopy, total operation time, total number of fluoroscopy, amount of bone cement injection, and complication (spinal canal leakage of bone cement) were observed. The visual analogue scale (VAS) and the anterior edge compression rate of the injured vertebra were compared before operation and 3 days after operation between two groups. RESULTS: All 60 patients were successfully operated without complication of spinal canal leakage of bone cement. In the guide plate group, the pedicle puncture time was(10.23±3.15) min and the number of fluoroscopy was(4.77±1.07) times, the total operation time was (33.83±4.21) min, the total number of fluoroscopy was(12.27±2.61) times;and in the conventional group, the pedicle puncture time was (22.83±3.09) min and the number of fluoroscopy was (10.93±1.62) times, the total operation time was(44.33±3.57) min, the total number of fluoroscopy was(19.20±2.67) times. There were statistically significant differences in the pedicle puncture time, intraoperative number of fluoroscopy, the total operation time, and the total number of fluoroscopy between the two groups(P<0.05). There was no significant difference in amount of bone cement injection between the two groups(P>0.05). There were no significant differences in VAS and the anterior edge compression rate of the injured vertebra at 3 days after operation between two groups(P>0.05). CONCLUSION: Three dimensional printing percutaneous guide plate assisted percutaneous kyphoplasty is safe and reliable, which can reduce the number of fluoroscopy, shorten the operation time, and decrease the radiation exposure of patients and medical staff, and conforms to the concept of precise orthopaedic management.

Green solvent pretreatment for enhanced production of sugars and antioxidative lignin from poplar.

A promising pretreatment mediated by biomass-derived deep eutectic solvent (DES) with choline chloride to lactic acid was implemented to overcome the recalcitrant structure of poplar sawdust for effective enzymatic hydrolysis and valorized lignin. Results showed the DES applied was strongly selective towards removal of lignin and xylan while preserving cellulose. Under the optimal pretreatment condition (DES ratio: 1:2, temperature: 130 °C, time:1.5 h), the glucose yield from enzymatic hydrolysis was 75.8%. Chemical and structure changes of recovered lignin were evaluated to gauge its valorization potential. It indicated that the recovered lignin possessed molecular weight (4000-6000 g/mol), low polydispersity (PDI < 2.0), low quantity of ß-aryl-ethers with no recondensation, and an abundance of phenolic OH groups. The excellent antioxidant capacity of lignin demonstrated its great value as a polyphenolic antioxidant. Overall, this work demonstrated an emerging biorefinery technology method for effective fractionation and valorization of lignocellulosic biomass.

Synergistic effects of hydrothermal and deep eutectic solvent pretreatment on co-production of xylo-oligosaccharides and enzymatic hydrolysis of poplar.

Full utilization of lignocellulose is critical for its biorefinery development. In this study, a sustainable biorefinery process based upon poplar sawdust was established using sequential hydrothermal and deep eutectic solvent treatment (HP-DES). Results showed that single hydrothermal pretreatment (HP) could produce 53.2% xylo-oligosaccharides (XOS) (based on raw xylan), while the enzymatic digestibility was low. Conversely, single DES treatment achieved effective enzymatic digestibility but low XOS yields. As compared to HP, both DES treatment and HP-DES showed high selectivity for lignin removal and high glucose yield. Surprisingly, most of HP-DES residues had obviously lower enzymatic digestibilities than those of single DES residues. This was mainly explained by the differences of the surface lignin contents between DES and HP-DES residues. Moreover, nearly complete enzymatic hydrolysis of HP-DES residues was achieved with the addition of bovine serum albumin. This work demonstrated this HP-DES yielded XOS, fermentable sugar, and pure lignin with high processibility.

Promoting enzymatic hydrolysis of aggregated bamboo crystalline cellulose by fast microwave-assisted dicarboxylic acid deep eutectic solvents pretreatments.

Deep eutectic solvents (DESs) have received considerable interests as pretreatment solvents for biorefinery. In the present work, five kinds of dicarboxylic acids based DESs were introduced to pretreatments on moso bamboo (MB) with microwave irradiation assistance. Factors influencing the enzymatic conversion of MB cellulose to glucose were determined. With the fast heating, pretreated samples all present significant delignification and hemicelluloses matrix removal, thus improving the enzymatic conversion yield from 15% of MB to ~60%. For the DESs, hydrogen donors with less carbon atoms (oxalic acid) and more hydroxyl groups (tartaric acid) displayed higher efficiency due to separation of aggregated cellulose microfibrils. The microwave assisted DESs (MW-DESs) pretreatments also contributed to cellulose crystal variations including decrystallization and more exposure of hydrophobic surfaces, which are beneficial for followed cellulase adsorption and hydrolysis. The exploration of fast MW-DESs pretreatments may expand the potentials of lignocellulose biomass on effective and applicable biorefinery.

Fabrication and characterization of biodegradable nanofibrous mats by mix and coaxial electrospinning.

The aim of this study is to investigate an innovative tissue engineering scaffold with a controllable drug-releasing capability. The hypothesis is that the nanofibers fabricated by coaxial electrospinning could encapsulate and release sustainedly Tetracycline Hydrochloride (TCH). To testify the hypothesis, nanofibers were prepared by coaxial electrospinning from Poly(L-lactid-co-epsilon-caprolactone) [PLLACL]/2,2,2-Frifluoroethanol (TFE) solutions (as the shell solutions) and TCH/TFE solutions (as the core solutions). In addition, nanofibers of PLLACL-blend-TCH were also prepared as the control by mix electrospinning. The relationship between fibers morphologies and processed conditions in electrospinning were investigated. TCH release behaviors from the nanofibrous mats were studied. The antibacterial properties of aforementioned nanofibers were detected by the Escherichia coli growth-inhibiting tests. The results indicated that the nanofibers prepared by coaxial-electrospinning had the desired and controllable TCH encapsulation/release profile; thus, it could be utilized as both a drug encapsulation/release vehicle and a tissue engineering scaffold.

Reusable Silicon-Based SERS Chip for Ratiometric Analysis of Fluoride Ion in Aqueous Solutions.

An innovative ratiometric surface-enhanced Raman scattering (SERS) sensor using a 4-mercaptoboric acid (4-MPBA)-modified silver nanoparticle-decorated silicon wafer (Si@Ag NPs chip) was proposed for the ultrasensitive determination of F- ions in aqueous solutions. The principle of sensing strategy is based on fluoride-induced structural symmetry breaking and charge redistribution of phenylboronic acid, leading to a band shift of the C-C stretching mode of 4-MPBA from 1589 to 1576 cm-1. Accordingly, a ratiometric signal of the area ratio (A1576/A1589) between the fluoride-bond MPBA molecules and unoccupied MPBA molecules can be used for the quantitative response of F- ions. In comparison with other SERS-based sensing methods, this ratiometric method can avoid a large error resulting from the inhomogeneity of substrates. Under the optimized analytical conditions, the proposed SERS sensor possesses a quick response to F- ions within 2 min and exhibits high selectivity for F- ions with the determination limit of 10-8 M, which is over 3 orders of magnitude lower than the World Health Organization (WHO) guideline value for F- ions in drinking water. Of particular significance, the present sensor features favorable recyclability, which preserves suitable reproducibility during 6-time cyclic determination of F- ions. The practical utility of this sensing system for the determination of F- ions was tested with real water and toothpaste samples, and the results demonstrate that this sensor shows high recoveries (90-110%). Given its simple principle and easy operation, the present silicon-based SERS sensor could serve as a promising sensor for various practical applications.

In situ terminus-regulated DNA hydrogelation for ultrasensitive on-chip microRNA assay.

In this work, a dynamic terminus-regulated fabric of DNA hydrogel was invented in debt to the reiterative catalysis of terminal deoxynucleotidyl transferase (TdT). It extended free 3'-OH end to an overhang of homopolymeric adenosine base pair, and alternated with branching from the frayed complementary seed oligo T20G5. The cycle of this template-independent and isothermal amplification resulted in a microscale dendritic DNA fractal at first, which then gelatinized into a cohesive and intricate 3D network. Details of the complex were elucidated with gel electrophoresis, confocal and atomic force microscopy. Its well hydrated inner space could further provide plenty of biocompatible chambers for enzymatic transducers fused along the elongation. Taking merits of this neat and flexible setup, an in situ hydrogelation strategy was developed and utilized in the signal cascade of a miRNA biomarker detector on an electrode microarray, thus accomplished an ultrasensitive, selective and high-throughput sensing even for real samples. This collective manipulation of DNA-protein hydrogel ensemble on interface demonstrates its potency as a general scheme of sensitization in bioanalytical applications.

Study of biocompatibility of small intestinal submucosa (SIS) with Schwann cells in vitro.

No satisfactory method currently exists for repairing long peripheral nerve defects. Efforts have been made to fabricate bioactive artificial nerve conduits, comprised of a biomaterial pre-seeded with Schwann cells (SCs), which creating a favorable micro-environment for axonal regeneration, to be an alternative to autografting by means of tissue engineering. Small intestinal submucosa (SIS) possesses special biological characteristics and is comprehensively researched for tissue repairing at varied tissues and organs. This study investigated the biocompatibility of SIS with SCs in vitro. Cultured rat SCs were seeded on SIS. Cell morphology was observed by light microscopy, scanning electron microscopy and transmission electron microscope. The viability of SCs was measured by MTT assay. Secretion of NGF-beta and BDNF was quantitatively assessed by ELISA, and NGF-beta mRNA and BDNF mRNA were semi-quantitatively assessed by RT-PCR. The results indicated that SCs could adhere, migrate and proliferate on the surface of SIS in good condition with productive function of secreting growth factors. SIS has a good biocompatibility with SCs and SIS pre-seeded with SCs has potential to be an alternate candidate of autografting for repairing long peripheral nerve defects.