Periodontal tissue repair after sealing of the gap in vertical root fracture.

The aim of this study was to determine whether sealing of fracture gap using adhesive resin through the root canal can prevent inflammation of periodontal tissue, and resealing the incompletely sealed fracture gap from outside can resolve such inflammation in experimentally created vertical root fractures. Vertical root fractures were created in incisor of beagles. In the experimental group, the fracture gap was sealed through the root canal with adhesive resin. After 5 weeks, sites with the clinical attachment level ≥4 mm were further divided randomly into the poor-replanting group and the poor-untreated group. In the poor-replanting group, the tooth was extracted and replanted after resealing the fracture gap with adhesive resin from the outer surface. Sites with clinical attachment level ≤3 mm after 5 weeks were considered as the satisfactory group. The poor-untreated group and the satisfactory group were subjected to no further treatment. The clinical attachment level was evaluated at baseline and after 2, 5, and 9 weeks. After 9 weeks, histological measurements were made to determine the length of the epithelial downgrowth and the area of alveolar bone resorption. The clinical attachment level and the area of bone resorption were significantly smaller in the poor-replanting group and the satisfactory group than in the poor-untreated group (p < 0.05). The results indicate the possibility that periodontal inflammation along the fracture line can be prevented and improved if the fracture gap is sealed.

Influence of enamel matrix derivative on healing of root surfaces after bonding treatment and intentional replantation of vertically fractured roots.

BACKGROUND/AIM: The objectives of this study were to histopathologically evaluate cementum regeneration on root surfaces when an enamel matrix derivative (EMD) was used to bond a vertically fractured root and to evaluate the effectiveness of EMD in inhibiting root resorption. MATERIAL AND METHODS: A total of 40 roots from 24 maxillary premolars in beagles were used. The root was vertically fractured using a chisel and mallet. Super-Bond was then used to bond the fractured root. In the experimental group, the root surface was treated with ethylenediaminetetraacetic acid and an EMD. The control group received no treatment. The root was then replanted in its original location. Histopathological observation and measurement using image-analyzing software were carried out after 8 weeks. RESULTS: In the experimental group, shallow resorption cavities developed on the root planed surfaces with new acellular cementum appearing over them. In the control group, no new cementum was seen on the planed surfaces, and there was connective tissue joining the roots. In some of the samples, resorption and multinucleated giant cells were seen. The experimental group showed a significantly larger volume of cementum formation (P < 0.001), and the volume of root resorption was significantly smaller (P = 0.004). CONCLUSION: When bonding and replanting tooth roots after a vertical fracture, the application of EMD was effective in regenerating cementum on root surfaces from which periodontal ligament had been lost in the area around the fracture line and in reducing the incidence of root resorption.

Effect of Periodontal Treatment on Reducing Chronic Inflammation in Systemically Healthy Patients With Periodontal Disease.

BACKGROUND: We determined the effects and an accurate marker of periodontal treatment on serum interleukin (IL)-6 and high-sensitivity C-reactive protein (HsCRP) levels in systemically healthy individuals with periodontal disease. METHODS: This multicenter study included systemically healthy individuals with periodontal disease who received initial periodontal treatment and had no periodontal treatment history. Periodontal parameters, including periodontal inflamed surface area, masticatory efficiency, and periodontal disease classification; serum IL-6 and HsCRP levels; and serum immunoglobulin (Ig)G titers against periodontal pathogens were evaluated at baseline and after treatment. Subjects were classified as low or high responders (group) based on periodontal inflamed surface area changes. RESULTS: There were 153 participants. Only periodontal inflamed surface area changes were markedly different between low and high responders. Periodontal treatment (time point) decreased both serum IL-6 and HsCRP levels. The interaction between group and time point was remarkable only for serum IL-6 levels. Changes in serum immunoglobulin (Ig)G titers against periodontal pathogens were not associated with IL-6 changes in high responders. We analyzed the indirect effect of serum anti-Porphyromonas gingivalis type 2 IgG titer changes using mediation analysis and found no significance. However, the direct effect of group (low or high responder) on IL-6 changes was considerable. CONCLUSIONS: Periodontal treatment effectively decreased serum IL-6 levels, independent of periodontal pathogen infection, in systemically healthy individuals with periodontal disease.

Cauterization of Narrow Root Canals Untouched by Instruments by High-Frequency Current.

The mechanical removal of bacteria is fundamental to the treatment of infected root canals, but complete sterilization of biofilms tends not to extend to uninstrumented areas. However, during electrical conduction to a root canal filled with a conductor, the higher impedance where the root canal is narrower generates Joule heat that may result in a large temperature increase and sterilization. The effect of a high-frequency electric current on the wall of a simulated narrow root canal was investigated by scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Simulated root canals, 0.1 mm in diameter, were prepared in dentine blocks. The root canal wall was treated with Plank-Rychlo solution for 5 min to create a decalcified layer. The simulated root canal was filled with either saline or NaClO, and 150 or 225 V at 520 kHz was applied for 0 s, 1 s, or 5 s. As the conduction time increased, and when the saline was replaced with NaClO, the proportion with a flat decalcified surface decreased, dentinal tubules and a lava-like morphology were significantly more evident on SEM (p < 0.01), and EDS showed significant decreases in carbon and oxygen and increases in calcium (p < 0.01). It was concluded that filling uninstrumented root canals with NaClO and using electrical conduction for 5 s could incinerate and eliminate the organic material of the root canal wall. The application of high-frequency electric current may lead to the cure of many cases of persistent apical periodontitis.

Screening of heat-killed lactic acid bacteria based on inhibitory activity against oral bacteria and effects of oral administration of heat-killed Ligilactobacillus salivarius CP3365 on periodontal health in healthy participants: a double-blinded, randomized, placebo-controlled trial.

Objectives: The aims of this study were to select heat-killed lactic acid bacteria (HKL) with antibiotic activity and investigate the efficacy of this bacteria in maintaining periodontal parameters in healthy participants. Materials and methods: An in vitro evaluation was conducted to assess the inhibitory efficacy of lactic acid bacteria against Porphyromonas gingivalis and Fusobacterium nucleatum subsp. nucleatum. The effects of HKL administration on various parameters (plaque control record, bleeding on probing, and probing pocket depth) were assessed in a randomized, placebo-controlled trial. Participants in the test and placebo groups (n = 32) consumed oral tablets containing placebo or HKL daily for 8 weeks. Oral bacteria in supra-plaque and saliva were identified using 16S rRNA gene community profiling analysis. Results: Heat-killed Ligilactobacillus salivarius CP3365 significantly (p < 0.05) decreased the viability of oral bacteria and was selected for clinical trials. Administration of HKL CP3365 significantly (p < 0.05) inhibited increases in each parameter. No changes in the relative abundance of P. gingivalis or F. nucleatum subsp. nucleatum were detected by HKL CP3365, but the relative abundance of oral bacteria (genera Porphyromonas, Fusobacterium, and Haemophilus) was significantly (p < 0.05) decreased. Conclusion: HKL CP3365 effectively inhibited oral bacteria growth and was useful for maintaining periodontal health. Clinical Trial Registration: [https://www.umin.ac.jp/ctr/index.htm], identifier [UMIN000045656].

Periodontal tissue regeneration by recombinant human collagen peptide granules applied with ß-tricalcium phosphate fine particles.

OBJECTIVES: Recombinant human collagen peptide (RCP) is a recombinantly created xeno-free biomaterial enriched in arginine-glycine-aspartic acid sequences with good processability whose use for regenerative medicine applications is under investigation. The biocompatibility and osteogenic ability of RCP granules combined with ß-tricalcium phosphate (TCP) submicron particles (ß-TCP/RCP) were recently demonstrated. In the present study, ß-TCP/RCP was implanted into experimental periodontal tissue defects created in beagles to investigate its regenerative effects. METHODS: An RCP solution was lyophilized, granulated, and thermally cross-linked into particles approximately 1 mm in diameter. ß-TCP dispersion (1 wt%; 500 µL) was added to 100 mg of RCP granules to form ß-TCP/RCP. A three-walled intrabony defect (5 mm × 3 mm × 4 mm) was created on the mesial side of the mandibular first molar and filled with ß-TCP/RCP. RESULTS: A micro-computed tomography image analysis performed at 8 weeks postoperative showed a significantly greater amount of new bone after ß-TCP/RCP grafting (2.2-fold, P < 0.05) than after no grafting. Histological findings showed that the transplanted ß-TCP/RCP induced active bone-like tissue formation including tartaric acid-resistant acid phosphatase- and OCN-positive cells as well as bioabsorbability. Ankylosis did not occur, and periostin-positive periodontal ligament-like tissue formation was observed. Histological measurements performed at 8 weeks postoperative revealed that ß-TCP/RCP implantation formed 1.7-fold more bone-like tissue and 2.1-fold more periodontal ligament-like tissue than the control condition and significantly suppressed gingival recession and epithelial downgrowth (P < 0.05). CONCLUSIONS: ß-TCP/RCP implantation promoted bone-like and periodontal ligament-like tissue formation, suggesting its efficacy as a periodontal tissue regenerative material.

Ultrasonic irrigation of periodontal pocket with surface pre-reacted glass-ionomer (S-PRG) nanofiller dispersion improves periodontal parameters in beagle dogs.

OBJECTIVES: Surface pre-reacted glass-ionomer (S-PRG) nanofiller, an antibacterial ion-releasing bioactive glass, has been shown to adhere to tooth surfaces and reported to improve inflammatory parameters in experimental periodontitis. In this study, cementum substrate was irrigated ultrasonically with dispersion to examine in-vitro nanofiller adhesion and antibacterial activity. Moreover, periodontal pockets in a beagle dog were ultrasonically irrigated with dispersion to assess periodontal healing. METHODS: The morphology of human cementum irrigated with S-PRG nanofiller dispersion was examined by scanning electron microscopy and energy dispersive X-ray spectrometry. The antibacterial activity of the treated cementum was tested using Actinomyces naeslundii. In addition, experimentally formed periodontal pockets in beagle dog were ultrasonically irrigated with S-PRG nanofiller dispersion. Periodontal parameters (gingival index, bleeding on probing, probing pocket depth, and clinical attachment level) were measured from baseline (0 weeks) through 12 weeks. Moreover, the effects of irrigation with S-PRG nanofiller on changes in periodontal microflora and bone healing were analyzed. RESULTS: After ultrasonic irrigation, S-PRG nanofiller adhered to the cementum and exhibited antibacterial activity. The periodontal parameters were shown to improve following ultrasonic irrigation with S-PRG nanofiller dispersion. Analysis by next-generation sequencing revealed that the ratio of red-complex species decreased in the pockets irrigated with S-PRG nanofiller dispersion. In addition, the S-PRG nanofiller showed the potential to promote bone healing. CONCLUSIONS: Ultrasonic irrigation with S-PRG nanofiller dispersion using an ultrasonic scaler system permitted delivery of the S-PRG nanofiller to the root surface, providing improved parameters in experimental periodontitis and modifying the composition of subgingival periodontal microflora.

Sustained antibacterial coating with graphene oxide ultrathin film combined with cationic surface-active agents in a wet environment.

Antimicrobial surfactants contained in mouthrinse have excellent efficacy, but are not retained on the tooth surface (are rinsed away) due to their low water resistance and thus do not exhibit sustained antibacterial activity. We have developed a new coating method using graphene oxide (GO) that retains the surfactant on the tooth surface even after rinsing with water, thus providing a sustained antibacterial effect. Ultra-thin films of GO and an antimicrobial agent were prepared by (1) applying GO to the substrate surface, drying, and thoroughly rinsing with water to remove excess GO to form an ultrathin film (almost a monolayer, transparent) on the substrate surface, then (2) applying antimicrobial cationic surface active agents (CSAAs) on the GO film to form a composite coating film (GO/CSAA). GO/CSAA formation was verified by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and ζ-potential and contact angle measurements. GO/CSAA was effective at inhibiting the growth of oral pathogens for up to 7 days of storage in water, and antibacterial activity was recovered by reapplication of the CSAA. Antibacterial GO/CSAA films were also formed on a tooth substrate. The results suggest that GO/CSAA coatings are effective in preventing oral infections.

Evaluation of antibacterial and cytocompatible properties of multiple-ion releasing zinc-fluoride glass nanoparticles.

Zinc-fluoride glass nanoparticles (Zinc-F) release several ions, such as fluoride, zinc and calcium ions, through acid-base reactions. The aim of this study was to evaluate the antibacterial and cytotoxic properties of Zinc-F. Antibacterial tests showed that a Zinc-F eluting solution significantly reduced the turbidity and colony-forming units of Streptococcus mutans and Actinomyces naeslundii, compared to that of calcium-fluoroaluminosilicate glass nanoparticles without zinc ions. In live/dead staining, Zinc-F eluate significantly decreased green-stained bacterial cells, indicating live cells, compared with the control (no application). Human dentin coated with Zinc-F showed suppressed S. mutans and A. naeslundii biofilm formation. Additionally, Zinc-F eluate showed low cytotoxic effects in osteoblastic and fibroblastic cells. Therefore, our findings suggested that Zinc-F exhibits antibacterial and biocompatible properties through multiple-ion release.

Antibacterial and Antibiofilm Photodynamic Activities of Lysozyme-Au Nanoclusters/Rose Bengal Conjugates.

Antibacterial photodynamic therapy (aPDT) utilizes reactive oxygen species such as singlet oxygen (1O2) and free radicals via photosensitizers, which are light and light-sensitive agents, to reduce bacterial infections. It has been utilized as a treatment for dental diseases in place of antibiotic therapies. However, aPDT does not always cause the desired therapeutic effect due to the instability of organic photosensitizers and the formation of bacterial biofilms. To promote the antibacterial and antibiofilm effects of aPDT, we have proposed a lysozyme (Lys)-gold nanoclusters (Au NCs)/rose bengal (Lys-Au NCs/RB) conjugate as a novel photosensitizer. This conjugate was found to effectively impede the growth of both gram-positive and gram-negative bacteria when exposed to white light-emitting diode (LED) irradiation. The photoexcited Lys-Au NCs/RB showed significantly higher antibacterial activity than photoexcited Lys-Au NCs or RB alone. The synergistic effect is a result of the combination of Lys (an antibacterial protein) and enhanced 1O2 generation related to resonance energy transfer (RET) in the Au NCs/RB conjugate. Photoexcited Lys-Au NCs/RB increased the effects of aPDT in a dose- and time-dependent manner. Furthermore, the photoexcited Lys-Au NCs/RB successfully decreased Streptococcus mutans biofilm formation. However, in contrast, it did not have a negative effect on the proliferation, adhesion, or spread of mammalian cells, indicating low cytotoxicity. Lys-Au NCs/RB is a novel photosensitizer with low cytotoxicity that is capable of bacterial inactivation and the suppression of biofilm formation, and could help to improve dental treatments in the future.

Antibacterial coating of tooth surface with ion-releasing pre-reacted glass-ionomer (S-PRG) nanofillers.

OBJECTIVES: Surface pre-reacted glass-ionomer (S-PRG) fillers release antibacterial borate and fluoride ions. We fabricated nanoscale S-PRG fillers (S-PRG nanofillers) for antibacterial coating of tooth surfaces and assessed the antibacterial effects of this coating in vitro. In addition, we creating a canine model of periodontitis to evaluate the effectiveness of S-PRG nanofiller application on tooth roots and improvement of periodontal parameters. METHODS: Human dentin blocks were coated with S-PRG nanofiller (average particle size: 0.48 µm) and then characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), and ion-releasing test. Antibacterial effects of dentin blocks coated with S-PRG nanofiller were examined using bacterial strains, Streptococcus mutans and Actinomyces naeslundii. Next, we created an experimental model of periodontitis in furcation of premolars of beagle dogs. Then, S-PRG nanofiller coating was applied onto exposed tooth root surfaces. Periodontal parameters, gingival index (GI), bleeding on probing (BOP), probing pocket depth (PPD), and clinical attachment level (CAL), were measured from baseline until 4 weeks. In addition, bone healing was radiographically and histologically examined. RESULTS: SEM and EDX revealed that S-PRG nanofillers uniformly covered the dentin surface after coating. Dentin blocks coated with S-PRG nanofiller showed ion-releasing property, bacterial growth inhibition, and sterilization effects. In the experimental periodontitis model, S-PRG nanofiller coating significantly reduced clinical inflammatory parameters, such as GI (P < 0.01) and BOP (P < 0.05), compared to uncoated samples. In addition, PPD and CAL significantly decreased by S-PRG nanofiller coating (2 weeks: P < 0.05; 3 and 4 weeks: P < 0.01), suggesting the improvement of periodontitis. Micro-CT and histology revealed that bone healing of furcation defects was enhanced by S-PRG nanofiller coating. CONCLUSION: S-PRG nanofiller coating provides antibacterial effects to tooth surfaces and improves clinical parameters of periodontitis.

Prospective Longitudinal Changes in the Periodontal Inflamed Surface Area Following Active Periodontal Treatment for Chronic Periodontitis.

Periodontal disease is a chronic inflammatory disease of the periodontal tissue. The periodontal inflamed surface area (PISA) is a proposed index for quantifying the inflammatory burden resulting from periodontitis lesions. This study aimed to investigate longitudinal changes in the periodontal status as evaluated by the PISA following the active periodontal treatment. To elucidate the prognostic factors of PISA, mixed-effect modeling was performed for clinical parameters, tooth-type, and levels of periodontal pathogens as independent variables. One-hundred-twenty-five patients with chronic periodontitis who completed the active periodontal treatment were followed-up for 24 months, with evaluations conducted at 6-month intervals. Five-times repeated measures of mean PISA values were 130+/-173, 161+/-276, 184+/-320, 175+/-417, and 209+/-469 mm2. Changes in clinical parameters and salivary and subgingival periodontal pathogens were analyzed by mixed-effect modeling. Plaque index, clinical attachment level, and salivary levels of Porphyromonas gingivalis were associated with changes in PISA at the patient- and tooth-level. Subgingival levels of P. gingivalis and Prevotella intermedia were associated with changes in PISA at the sample site. For most patients, changes in PISA were within 10% of baseline during the 24-month follow-up. However, an increase in the number of bleeding sites in a tooth with a deep periodontal pocket increased the PISA value exponentially.

Estimation of the Periodontal Inflamed Surface Area by Simple Oral Examination.

The periodontal inflamed surface area (PISA) is a useful index for clinical and epidemiological assessments, since it can represent the inflammation status of patients in one contentious variable. However, calculation of the PISA is difficult, requiring six point probing depth measurements with or without bleeding on probing on 28 teeth, followed by data input in a calculation program. More simple methods are essential for screening periodontal disease or in epidemiological studies. In this study, we tried to establish a convenient partial examination method to estimate PISA. Cross-sectional data of 254 subjects who completed active periodontal therapy were analyzed. Teeth that represent the PISA value were selected by an item response theory approach. The maxillary second molar, first premolar, and lateral incisor and the mandibular second molar and lateral incisor were selected. The sum of the PISAs of these teeth was significantly correlated with the patient's PISA (R2 = 0.938). More simply, the sum of the maximum values of probing pocket depth with bleeding for these teeth were also significantly correlated with the patient's PISA (R2 = 0.6457). The simple model presented in this study may be useful to estimate PISA.

Photodynamic inactivation of oral bacteria with silver nanoclusters/rose bengal nanocomposite.

Antimicrobial photodynamic therapy (a-PDT) is a promising anti-infective technique for generation of singlet oxygen (1O2) to target dental disease. However, conventional organic photosensitizers have problems for clinical use in terms of cytotoxicity, quenching of a-PDT activity by self-dimerization, and the lack of long-term antibacterial effect. We herein propose silver nanoclusters/rose bengal nanocomposite (AgNCs/RB) as a novel photosensitizer with two primary antibacterial effects: (1) 1O2 generation by irradiated RB and (2) Ag+ ion release from AgNCs. AgNCs/RB irradiated with white light-emitting diode (LED) for a short irradiation time of 1 min significantly decreased the bacterial turbidity of Streptococcus mutans, Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans (P < 0.05). In SEM, TEM and LIVE/DEAD staining images, photoexcited AgNCs/RB reduced S. mutans colonization, destroyed the cell membrane, and increased the number of dead cells. The antibacterial efficiency of photoexcited AgNCs/RB was greater than that of AgNCs or RB alone (P < 0.05), suggesting a synergistic effect of 1O2 and Ag+ ions from photoexcited AgNCs/RB. By contrast, photoexcited AgNCs/RB did not affect WST-8 and LDH activities and morphology of NIH3T3 mammalian cells, indicating low cytotoxicity. Interestingly, the antibacterial activity of AgNCs/RB on S. mutans was maintained even after the cessation of LED irradiation, indicating a long-term antibacterial effect due to released Ag+ ions. The present AgNCs/RB photosensitizers provide effective synergistic antibacterial effects for dental a-PDT via 1O2 and Ag+ ions coupled with low cytotoxicity.

Optimal Examination Sites for Periodontal Disease Evaluation: Applying the Item Response Theory Graded Response Model.

Periodontal examination data have a complex structure. For epidemiological studies, mass screenings, and public health use, a simple index that represents the periodontal condition is necessary. Periodontal indices for partial examination of selected teeth have been developed. However, the selected teeth vary between indices, and a justification for the selection of examination teeth has not been presented. We applied a graded response model based on the item response theory to select optimal examination teeth and sites that represent periodontal conditions. Data were obtained from 254 patients who participated in a multicenter follow-up study. Baseline data were obtained from initial follow-up. Optimal examination sites were selected using item information calculated by graded response modeling. Twelve sites-maxillary 2nd premolar (palatal-medial), 1st premolar (palatal-distal), canine (palatal-medial), lateral incisor (palatal-central), central incisor (palatal-distal) and mandibular 1st premolar (lingual, medial)-were selected. Mean values for clinical attachment level, probing pocket depth, and bleeding on probing by full mouth examinations were used for objective variables. Measuring the clinical parameters of these sites can predict the results of full mouth examination. For calculating the periodontal index by partial oral examination, a justification for the selection of examination sites is essential. This study presents an evidence-based partial examination methodology and its modeling.

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants.

Background: Collagen is a basic component of the periodontium and plays an important role in the function of the periodontal unit. Therefore, coating with collagen/gelatin has been applied to enable dental implants to positively interact with peri-implant tissues. Although the micro/nanoscale topography is an important property of the surface of dental implants, smaller collagen/gelatin surface patterns have not been sufficiently developed. Furthermore, only few reports on the behavior of cells on gelatin surfaces with different patterns and sizes exist. In this study, we developed micro/nanometer-scaled gelatin surfaces using genipin crosslinking, with the aim of understanding the use of patterning in surface modification of dental implants. Results: Grooves, holes, and pillars, with widths or diameters of 2 µm, 1 µm, or 500 nm were fabricated using a combination of molding and genipin crosslinking of gelatin. The stability of the different gelatin patterns could be controlled by the degree of genipin crosslinking. The gelatin patterns at 20 mM concentration of genipin and 41% crosslinking maintained a stable, patterned shape for at least 14 days in a cell culture medium. A cell morphology study showed that the cells on groves were aligned along the direction of the grooves. In contrast, the cells on pillars and holes exhibited randomly elongated filopodia. The vinculin spots of the cells were observed on the top of ridges and pillars or the upper surface of holes. The results of a cell attachment assay showed that the number of surface-attached cells increased with increasing patterning of the gelatin surface. Unlike the cell attachment assay, the results of a cell proliferation assay showed that Saos-2 cells prefer grooves with diameters of approximately 2 µm and 1 µm and pillars with diameters of 1 µm and heights of 500 nm. The number of cells on pillars with heights of 2 µm was larger than those of the other gelatin surface patterns tested. Conclusion: These data support that a detailed design of the gelatin surface pattern can control both cell attachment and proliferation of Saos-2 cells. Thus, gelatin surfaces patterned using genipin crosslinking are now an available option for biocompatible material patterning.

Characterization and evaluation of graphene oxide scaffold for periodontal wound healing of class II furcation defects in dog.

INTRODUCTION: The 3-dimensional scaffold plays a key role in volume and quality of repair tissue in periodontal tissue engineering therapy. We fabricated a novel 3D collagen scaffold containing carbon-based 2-dimensional layered material, named graphene oxide (GO). The aim of this study was to characterize and assess GO scaffold for periodontal tissue healing of class II furcation defects in dog. MATERIALS AND METHODS: GO scaffolds were prepared by coating the surface of a 3D collagen sponge scaffold with GO dispersion. Scaffolds were characterized using cytotoxicity and tissue reactivity tests. In addition, GO scaffold was implanted into dog class II furcation defects and periodontal healing was investigated at 4 weeks postsurgery. RESULTS: GO scaffold exhibited low cytotoxicity and enhanced cellular ingrowth behavior and rat bone forming ability. In addition, GO scaffold stimulated healing of dog class II furcation defects. Periodontal attachment formation, including alveolar bone, periodontal ligament-like tissue, and cementum-like tissue, was significantly increased by GO scaffold implantation, compared with untreated scaffold. CONCLUSION: The results suggest that GO scaffold is biocompatible and possesses excellent bone and periodontal tissue formation ability. Therefore, GO scaffold would be beneficial for periodontal tissue engineering therapy.

Hybrid layer seals the cementum/4-META/MMA-TBB resin interface.

Although 4-META/MMA-TBB resin has adhesive properties to dentin, and has been clinically used for the bonding treatment of vertically fractured roots and apicoectomy, there has not been any investigation on the adhesion of 4-META/MMA-TBB resin to cementum. The purpose of this in vitro study was to evaluate the bonding and the sealing ability of 4-META/MMA-TBB resin to cementum. Bovine root cementum and dentin surfaces were treated with a citric acid and ferric chloride solution, and the 4-META/MMA-TBB resin was applied on the treated surfaces before testing. The microtensile bond strength and the leakage levels obtained for the cementum were almost equal to those for the dentin. In SEM and TEM observations, a hybrid layer approximately 2-3 microm in thickness was observed at the interface between the resin and the cementum. It is concluded that 4-META/MMA-TBB resin adhered to cementum via a hybrid layer on cementum, as previously reported for dentin.

Antimicrobial photodynamic activity and cytocompatibility of Au25(Capt)18 clusters photoexcited by blue LED light irradiation.

Antimicrobial photodynamic therapy (aPDT) has beneficial effects in dental treatment. We applied captopril-protected gold (Au25(Capt)18) clusters as a novel photosensitizer for aPDT. Photoexcited Au clusters under light irradiation generated singlet oxygen (1O2). Accordingly, the antimicrobial and cytotoxic effects of Au25(Capt)18 clusters under dental blue light-emitting diode (LED) irradiation were evaluated. 1O2 generation of Au25(Capt)18 clusters under blue LED irradiation (420-460 nm) was detected by a methotrexate (MTX) probe. The antimicrobial effects of photoexcited Au clusters (0, 5, 50, and 500 µg/mL) on oral bacterial cells, such as Streptococcus mutans, Aggregatibacter actinomycetemcomitans, and Porphyromonas gingivalis, were assessed by morphological observations and bacterial growth experiments. Cytotoxicity testing of Au clusters and blue LED irradiation was then performed against NIH3T3 and MC3T3-E1 cells. In addition, the biological performance of Au clusters (500 µg/mL) was compared to an organic dye photosensitizer, methylene blue (MB; 10 and 100 µg/mL). We confirmed the 1O2 generation ability of Au25(Capt)18 clusters through the fluorescence spectra of oxidized MTX. Successful application of photoexcited Au clusters to aPDT was demonstrated by dose-dependent decreases in the turbidity of oral bacterial cells. Morphological observation revealed that application of Au clusters stimulated destruction of bacterial cell walls and inhibited biofilm formation. Aggregation of Au clusters around bacterial cells was fluorescently observed. However, photoexcited Au clusters did not negatively affect the adhesion, spreading, and proliferation of mammalian cells, particularly at lower doses. In addition, application of Au clusters demonstrated significantly better cytocompatibility compared to MB. We found that a combination of Au25(Capt)18 clusters and blue LED irradiation exhibited good antimicrobial effects through 1O2 generation and biosafe characteristics, which is desirable for aPDT in dentistry.

Site-level progression of periodontal disease during a follow-up period.

Periodontal disease is assessed and its progression is determined via observations on a site-by-site basis. Periodontal data are complex and structured in multiple levels; thus, applying a summary statistical approach (i.e., the mean) for site-level evaluations results in loss of information. Previous studies have shown the availability of mixed effects modeling. However, clinically beneficial information on the progression of periodontal disease during the follow-up period is not available. We conducted a multicenter prospective cohort study. Using mixed effects modeling, we analyzed 18,834 sites distributed on 3,139 teeth in 124 patients, and data were collected 5 times over a 24-month follow-up period. The change in the clinical attachment level (CAL) was used as the outcome variable. The CAL at baseline was an important determinant of the CAL changes, which varied widely according to the tooth surface. The salivary levels of periodontal pathogens, such as Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans, were affected by CAL progression. "Linear"- and "burst"-type patterns of CAL progression occurred simultaneously within the same patient. More than half of the teeth that presented burst-type progression sites also presented linear-type progression sites, and most of the progressions were of the linear type. Maxillary premolars and anterior teeth tended to show burst-type progression. The parameters identified in this study may guide practitioners in determining the type and extent of treatment needed at the site and patient levels. In addition, these results show that prior hypotheses concerning "burst" and "linear" theories are not valid.