Pretreatment Strategies to Enhance Enzymatic Hydrolysis and Cellulosic Ethanol Production for Biorefinery of Corn Stover.

There is a rising interest in bioethanol production from lignocellulose such as corn stover to decrease the need for fossil fuels, but most research mainly focuses on how to improve ethanol yield and pays less attention to the biorefinery of corn stover. To realize the utilization of different components of corn stover in this study, different pretreatment strategies were used to fractionate corn stover while enhancing enzymatic digestibility and cellulosic ethanol production. It was found that the pretreatment process combining dilute acid (DA) and alkaline sodium sulfite (ASS) could effectively fractionate the three main components of corn stover, i.e., cellulose, hemicellulose, and lignin, that xylose recovery reached 93.0%, and that removal rate of lignin was 85.0%. After the joint pretreatment of DA and ASS, the conversion of cellulose at 72 h of enzymatic hydrolysis reached 85.4%, and ethanol concentration reached 48.5 g/L through fed-batch semi-simultaneous saccharification and fermentation (S-SSF) process when the final concentration of substrate was 18% (w/v). Pretreatment with ammonium sulfite resulted in 83.8% of lignin removal, and the conversion of cellulose and ethanol concentration reached 86.6% and 50 g/L after enzymatic hydrolysis of 72 h and fed-batch S-SSF, respectively. The results provided a reference for effectively separating hemicellulose and lignin from corn stover and producing cellulosic ethanol for the biorefinery of corn stover.

Transformation of Corn Stover into Furan Aldehydes by One-Pot Reaction with Acidic Lithium Bromide Solution.

Currently, the production of furan aldehydes from raw biomass suffers from low furfural yield and high energy consumption. In this study, a recyclable and practical method was explored for the preparation of furfural from corn stover by the one-pot reaction by acidic lithium bromide solution (ALBS) without pretreatment and enzymolysis. In the ALBS reaction, the furan aldehydes were generated by the degradation of lignocellulose; however, the products were unstable and were further dehydrated to form humins. So, dehydration reaction was inhibited in this study, and the high yield of furan aldehydes was obtained, in which 2.94 g/L of furfural and 2.78 g/L of 5-hydroxymethyl furfural (5-HMF) were generated with high solid loading (10 wt%), the presence of commercial catalyst ZSM-5 and co-solvent tetrahydrofuran (THF) at 140 °C for 200 min. Via this method, almost 100% of hemicellulose was transformed to furfural, and 40.71% of cellulose was transformed to 5-HMF, which was based on the theoretical yield of HMF (8.35 g) from glucose (29.30 g) produced from cellulose. After the reaction, the catalyst ZSM-5 was the main component in the solid residue and kept a suitable performance. THF azeotrope was easily separated from the slurry by evaporation. During the removal of THF, lignin was precipitated from the liquid phase and showed lower molecular weight and abundant active groups, which was a potential feedstock for producing valuable aromatics and polymers. Thus, in a one-pot reaction, the ideal yield of furan aldehydes from raw biomass was obtained on a lab scale, and the catalyst, THF, and LiBr were easily recycled, which provided an option to realize the economical production of sustainable furan aldehydes from raw biomass.

Cellulose induced protein 1 (Cip1) from Trichoderma reesei enhances the enzymatic hydrolysis of pretreated lignocellulose.

BACKGROUND: Trichoderma reesei is currently the main strain for the commercial production of cellulase. Cellulose induced protein 1 (Cip1) is one of the most abundant proteins in extracellular proteins of T. reesei. Reported literatures about Cip1 mainly focused on the regulation of Cip1 and its possible enzyme activities, but the effect of Cip1 on the enzymatic hydrolysis of lignocellulose and possible mechanism have not still been reported. RESULTS: In this study, Cip1 from T. reesei was cloned, expressed and purified, and its effects on enzymatic hydrolysis of several different pretreated lignocellulose were investigated. It was found that Cip1 could promote the enzymatic hydrolysis of pretreated lignocellulose, and the promoting effect was significantly better than that of bovine serum albumin (BSA). And especially for the lignocellulosic substrate with high lignin content such as liquid hot water pretreated corn stover and corncob residue, the promoting effect of Cip1 was even better than that of the commercial cellulase when adding equal amount protein. It was also showed that the metal ions Zn2+ and Cu2+ influenced the promoting effect on enzymatic hydrolysis. The Cip1 protein had no lyase activity, but it could destroy the crystal structure of cellulose and reduce the non-productive adsorption of cellulase on lignin, which partly interpreted the promoting effect of Cip1 on enzymatic hydrolysis of lignocellulose. CONCLUSION: The Cip1 from T. reesei could significantly promote the enzymatic hydrolysis of pretreated lignocellulose, and the promotion of Cip1 was even higher than that of commercial cellulase in the enzymatic hydrolysis of the substrates with high lignin content. This study will help us to better optimize cellulase to improve its ability to degrade lignocellulose, thereby reducing the cost of enzymes required for enzymatic hydrolysis.

Degradable cationic polyesters via ring-opening copolymerization of valerolactones as nanocarriers for the gene delivery.

The development of cationic polymers as non-viral gene vectors has been hurdled by their high toxicity, thus degradable and biocompatible polymers are urgently demanded. Herein, five polyesters (B3a-B3e) were synthesized based on the ring-opening copolymerization between α-allyl-δ-valerolactone and δ-valerolactone derivatives decorated with alkyl or alkoxyl chains of different lengths, followed by the modification with 1,5,9-triazacyclododecyl ([12]aneN3) through thiol-ene click reactions. The five polyesters effectively condensed DNA into nanoparticles. Of them, B3a with a shorter alkyl chain and B3d with more positive charged units showed stronger DNA condensing performance and can completely retard the migration of DNA at N/P = 1.6 in the presence of DOPE. B3b/DOPE with a longer alkyl chain exhibited the highest transfection efficiency in HeLa cells with 1.8 times of 25 kDa PEI, while B3d/DOPE with more positive charged units exhibited highest transfection efficiency in A549 cells with 2.3 times of 25 kDa PEI. B3b/DOPE and B3d/DOPE successfully delivered pEGFP into zebrafish, which was superior to 25 kDa PEI (1.5 folds and 1.1 folds, respectively). The cytotoxicity measurements proved that the biocompatibility of these polyesters was better than 25 kDa PEI, due to their degradable property in acid environment. The results indicated that these cationic polyesters can be developed as potential non-viral gene vectors for DNA delivery.

H2O2-responsive polymeric micelles with a benzil moiety for efficient DOX delivery and AIE imaging.

Nano drug delivery is a promising domain in biomedical theranostics and has aroused more and more attention in recent years. We report here an amphiphilic polymer TPG1, bearing a H2O2-sensitive benzil and an AIE fluorophore tetraphenylethene (TPE) unit, which is able to self-assemble into spherical nanosized micelles in aqueous solution. Doxorubicin (DOX) can be encapsulated into TPG1 micelles efficiently with the loading capability of up to 59% by weight. The benzil moiety could be cleaved via the Baeyer-Villiger type reaction in the presence of H2O2, leading to the decomposition of TPG1 micelles and release of DOX. In vitro studies indicated that DOX-loaded TPG1 micelles can be internalized by cancer cells, followed by unloading encapsulated DOX under the stimulation of H2O2. The drug release process can be monitored by the AIE fluorescence from the degradation products containing a TPE moiety. MTT assays against HeLa and HepG2 cancer cells demonstrated that DOX-loaded micelles showed good anticancer efficacy. The polymer TPG1 and the corresponding decomposed products showed great biocompatibility. Our data suggest that TPG1 has the potential to be employed for the controlled drug delivery system.

Lignin-xylan nanospheres prepared by green and quick method from lignocellulose and used as additive in PVA films.

Lignin, as an amorphous three-dimensional aromatic polymer, was able to self-assemble into lignin nanoparticles (LNPs) to realize valorization of lignin. Here, lignin-xylan extractives were extracted from grape seed (GS) and poplar by acidic THF at room temperature, and effectively produced lignin-xylan nanospheres via spin evaporation. The morphology and chemical properties of nanospheres were determined by its natural origins, consequently influencing its application. For the lignin-xylan extractive from grape seed, the lignin was composed of guaiacyl (G) and p-hydroxylphenyl (H) units and the hollowed nanospheres (GS-LNPs) with 362.72 nm diameter was produced. The extractive from poplar was composed of G-syringyl (S) typed lignin (80.30 %) and xylan (12.33 %), that can assemble into LNPs with smaller size (229.87 nm), better PDI (0.1), and light color. The hybrid particles showed the qualities of lignin and xylan, that properties led to the LNPs@PVA composite films with UV-blocking capability, strong mechanical strength and hydrophobicity, and transparency ability of visible light. P-LNPs showed better performance as the film additives, due to its lower particles size and high content of unconjugated -OH from xylan. Xylan was significant in the composite films, and lowering the xylan content resulted in the decrease of the composite film's mechanical properties and hydrophobicity.

Production of single cell protein from brewer's spent grain through enzymatic saccharification and fermentation enhanced by ammoniation pretreatment.

Brewer's spent grain (BSG) is a major low-value by-product of beer industry. To realize the high value application of BSG, this work proposed a strategy to produce single cell protein (SCP) with oligosaccharide prebiotics from BSG, via ammoniation pretreatment, enzymatic hydrolysis, and fermentation. The optimum conditions of ammoniation pretreatment obtained by response surface method were 11 % ammonia dosage (w/w), 63 °C for 26 h. Suitable enzyme and yeast were screened to enhance the conversion of cellulose and hemicellulose in BSG into sugars and maximize the SCP yield. It was shown that using lignocellulolytic enzyme SP from Penicillium oxalicum and Trichosporon cutaneum, about 310 g of SCP with 80 g of arabinoxylo-oligosaccharides were obtained from 1000 g of BSG. This process is low cost, high efficiency, and easy to implement, which has good industrial application prospects.

[Effect of Antibiotic-Degrading Bacteria on Maturity and Bacterial Community Succession During Pig Manure Composting].

The inoculation of antibiotic-degrading bacteria into manure could promote the removal of antibiotics during composting. However, knowledge on the impact of inoculating these antibiotic-degrading bacteria on the composting process and indigenous microbial community succession is still limited. This study assessed the antibiotic removal efficiency in pig manure after inoculating a microbial inoculum with antibiotic-degrading bacteria as the key component. The effect of inoculating this microbial inoculum on the physicochemical dynamics and the succession of the manure bacterial community during composting was also analyzed. The results showed that the antibiotic degradation in pig manure reached 81.95% after inoculating the microbial inoculum. When compared with that in the control, the total concentration of antibiotic residues in manure with the microbial agent inoculated was decreased by 42.18%. During composting, inoculating the microbial inoculum accelerated the temperature rise of compost, favored water loss, and alleviated the release of NH3 and H2S. Moreover, the total nutrient content (nitrogen, phosphorus, and potassium) in the final compost and the germination index of radish seeds increased by 6.80% and 68.33%, respectively, after inoculating this microbial inoculum. Furthermore, inoculating the microbial inoculum increased the content of stable organic carbon in the final compost and decreased the content of recalcitrant substances such as cellulose and hemicellulose. The analysis of the manure bacterial community showed that inoculating the microbial inoculum increased the relative abundances of Actinomycetes and Firmicutes in the compost. In particular, the thermophilic bacteria that was positively related to the compost temperature was increased significantly (P<0.01) after inoculating the microbial inoculum, whereas the relative abundance of pathogenic bacteria was correspondingly decreased. Network analysis of the bacterial coexistence pattern showed that inoculating this microbial inoculum also changed the interaction pattern of indigenous manure bacterial communities, which greatly reduced the complexity and connectivity of the bacterial interaction and improved the ecological relationship between beneficial bacteria and other bacterial communities. The effect of this microbial inoculum on the interaction with manure bacterial community laid a foundation for the establishment of a new and healthier composting bacterial community. This study provides a scientific basis for the application and development of multifunctional antibiotic-degrading microbial agents in manure treatments.

Efficient Constitutive Expression of Cellulolytic Enzymes in Penicillium oxalicum for Improved Efficiency of Lignocellulose Degradation.

Efficient cellulolytic enzyme production is important for the development of lignocellulose-degrading enzyme mixtures. However, purification of cellulases from their native hosts is time- and labor-consuming. In this study, a constitutive expression system was developed in Penicillium oxalicum for the secreted production of proteins. Using a constitutive polyubiquitin gene promoter and cultivating with glucose as the sole carbon source, nine cellulolytic enzymes of different origins with relatively high purity were produced within 48 h. When supplemented to a commercial cellulase preparation, cellobiohydrolase I from P. funiculosum and cellobiohydrolase II from Talaromyces verruculosus showed remarkable enhancing effects on the hydrolysis of steam-exploded corn stover. Additionally, a synergistic effect was observed for these two cellobiohydrolases during the hydrolysis. Taken together, the constitutive expression system provides a convenient tool for the production of cellulolytic enzymes, which is expected to be useful in the development of highly efficient lignocellulose-degrading enzyme mixtures.

Macrocyclic polyamine [12]aneN3 modified triphenylamine-pyrazine derivatives as efficient non-viral gene vectors with AIE and two-photon imaging properties.

With the aim to develop a novel multifunctional gene delivery system that may overcome the common barriers of gene transfection, near-infrared fluorescent triphenylamine-pyrazine was modified with a DNA condensing triazole-[12]aneN3 moiety through different length alkyl ester linkages to afford three new non-viral gene vectors, TDM-A/B/C. All compounds showed prominent solvatochromic fluorescence (Stokes shift of up to 383 nm) and two-photon absorption properties (σ2P to 101 GM), and exhibited strong aggregation-induced emission (AIE). Gel electrophoresis demonstrated that plasmid DNA was completely condensed at a concentration of 10 µM (TDM-A), 14 µM (TDM-B) and 16 µM (TDM-C), and released in esterase and acidic environment. SEM demonstrated that the three compounds were able to self-assemble and co-aggregate with DNA to form regular nanoparticles. Experiments demonstrated that TDM-A/B/C was able to integrate with DNA through electrostatic interactions and supramolecular stacking, and the short alkyl linkage favored the strong interaction with DNA. Among the three compounds, TDM-B showed the best luciferase and GFP transfection activities in the presence of DOPE, which were 156% and 310% higher than those of Lipo2000, respectively. The transfection process of DNA was clearly traced through one- and two-photon fluorescence microscopy imaging. Cellular uptake inhibition assay indicated that the DNA complex entered the cell mainly via clathrin-independent endocytosis. Furthermore, the in vivo transfection experiments of TDM-B/DOPE were successfully implemented in zebra fish embryos, and the GFP gene expression level was superior to that of Lipo2000 (200%). Finally, this study clearly unraveled that the length of the alkyl linkage affected the DNA condensation and transfection activity, which can serve as a base for the future rational design of non-viral gene vectors.

Synthesis of Glutathione (GSH)-Responsive Amphiphilic Duplexes and their Application in Gene Delivery.

Oligoamide molecular strands with hydrogen-bonding sequences DADDAD and guanidine (O-1) or 1,5,9-triazacyclododecane ([12]aneN3 ; O-2) side chains and oligoamides with hydrogen-bonding sequences ADAADA and octyl moieties (O-3), were synthesized. Two duplexes (D-1 and D-2) were prepared by conjugating the hydrophilic O-1 or O-2 and hydrophobic O-3 through sequence-specific hydrogen-bond association and cross-linked disulfide bonds. Electrophoresis measurements indicated that O-1, O-2, D-1, and D-2 were able to completely retard the DNA mobiliy at concentrations of 30, 30, 10, and 20 µM, respectively. Reversible DNA release in O-1 and O-2 complexes can be achieved in the presence of heparin sodium, whereas the presence of GSH greatly improved DNA release in D-1 and D-2 complexes. The particles formed were in a size range of 50-170 nm with positively charged surfaces. D-1 and D-2 transfected pEGFP-N1 into HeLa cells successfully.

Tatarinan N inhibits osteoclast differentiation through attenuating NF-κB, MAPKs and Ca2+-dependent signaling.

Osteoclasts are multinucleated cells that originate from hemopoietic stem cells. Targeting over activated osteoclasts is thought to be an effective therapeutic approach to osteoporosis. In a previous study, we reported that Tatarinan O, a lignin-like compound, suppressed RANKL-induced osteoclastogenesis. In this study, we further examined the effects on osteoclast formation of three lignin-like compounds including Tatarinan N (TN), Tatarinan U (TU) and Tatarinan V (TV), all containing a common structure of asarone. We found that only TN suppressed RANKL-induced osteoclast differentiation, bone resorption pit formation and F-acting ring formation. TU and TV did not influence RANKL-induced osteoclastogenesis. We also found that TN dose-dependently inhibited the expression of osteoclastogenesis-associated genes, including TRAP, cathepsin K and MMP-9. Furthermore, we found that TN down-regulated the key transcription factor NFATc1 and c-Fos by preventing the activation of NF-κB and phosphorylation of MAPKs including ERK1/2 and p38 but not JNK. TN attenuated calcineurin expression via suppression of the Btk-PLCγ2 cascade and reduction of intracellular Ca2+, modulating NFATc1 activation. Taking together, our results indicated that TN might have therapeutic potential for osteoporosis.

Bisulfite pretreatment changes the structure and properties of oil palm empty fruit bunch to improve enzymatic hydrolysis and bioethanol production.

Bisulfite pretreatment is a proven effective method for improving the enzymatic hydrolysis of empty fruit bunch (EFB) from oil palm for bioethanol production. In this study, we set out to determine the changes that occur in the structure and properties of EFB materials and fractions of hemicellulose and lignin during the bisulfite pretreatment process. The results showed that the crystallinity of cellulose in EFB increased after bisulfite pretreatment, whereas the EFB surface was damaged to various degrees. The orderly structure of EFB, which was maintained by hydrogen bonds, was destroyed by bisulfite pretreatment. Bisulfite pretreatment also hydrolyzed the glycosidic bonds of the xylan backbone of hemicellulose, thereby decreasing the molecular weight and shortening the xylan chains. The lignin fractions obtained from EFB and pretreated EFB were typically G-S lignin, and with low content of H units. Meanwhile, de-etherification occurred at the ß-O-4 linkage, which was accompanied by polymerization and demethoxylation as a result of bisulfite pretreatment. The adsorption ability of cellulase differed for the various lignin fractions, and the water-soluble lignin fractions had higher adsorption capacity on cellulase than the milled wood lignin. In general, the changes in the structure and properties of EFB provided insight into the benefits of bisulfite pretreatment.

Effect of Terplex/VEGF-165 gene therapy on left ventricular function and structure following myocardial infarction. VEGF gene therapy for myocardial infarction.

BACKGROUND: We used a novel lipopolymeric gene delivery system, TeplexDNA, to transfect myocardium with plasmid vascular endothelial growth factor-165 (pVEGF) and evaluated the ability of pVEGF to preserve left ventricular function and structure after coronary ligation in a rabbit model. METHODS: New Zealand white rabbits underwent circumflex coronary ligation after direct intramyocardial injection of either Terplex alone or Terplex + 50 microg pVEGF-165. Serial echocardiography and histologic studies were performed (n = 12/group). Mortality did not differ between groups. The data is reported as the mean +/- standard deviation. RESULTS: Over the 21 days following coronary ligation, pVEGF-165-treated animals demonstrated significant improvement in fractional shortening (20-25%, p = 0.02), long axis two-dimensional ejection fraction (42-51%, p=0.02) and short axis m-mode ejection fraction (46-54%, p = 0.02). No significant improvements were noted in the control group. VEGF-treated animals had a 50% increase in peri-infarct vessel density and a trend towards a smaller infarct size (20% vs. 29%, p = 0.10). In animals receiving pVEGF-165, the diastolic ventricular area increased from 1.87 +/- 0.24 cm2 prior to ligation to 2.19 +/- 0.23 cm2 at 21 days following ligation, compared to an increase from 1.84 +/- 0.38 to 2.54 +/- 0.55 cm2 over the same period in control animals (p = 0.03). Similarly, the systolic ventricular area in VEGF-165 animals increased from 1.06 +/- 0.26 cm2 prior to ligation to 1.50 +/- 0.29 cm2 at 21 days following ligation, compared to an increase from 1.16 +/- 0.30 to 1.86 +/- 0.43 cm2 over the same period in the control animals (p = 0.04). CONCLUSION: TerplexDNA mediated delivery of plasmid VEGF administered at the time of coronary occlusion improves left ventricular function and reduces left ventricular dilation following myocardial infarction.

[Pretreatment of ramie and kenaf stalk for bioethanol production].

Ramie and kenaf were traditional fiber crops in China, but their stalk after decorticating has not been used effectively. The stalk contains a lot of cellulose, and can therefore be used for the production of bioethanol. We studied the effects of different chemical pretreatment on enzymatic digestibility of ramie stalk and kenaf stalk. Ramie and kenaf stalks pretreated with alkali were chosen to produce ethanol using quasi-simultaneous saccharification and fermentation (Q-SSF) process. The results show that for the stalks pretreated with 4% NaOH and 0.02% anthraquinone-2-sulfonic acid sodium salt (AQSS) as catalyzer at 170 degrees C for 1 h, the ethanol concentration could reach 51 g/L after fermentation for 168 h at 18% of solid substrate concentration. By fed-batch to 20% of solid substrate concentration, the ethanol concentration could reach 63 g/L, 77% and 79% of the cellulose conversion could get for ramie stalk and kenaf stalk, respectively. For kenaf stalk pretreated with 5.2% NaHSO3 and 0.2% H2SO4 at 170 degrees C for 1 h, the ethanol concentration and cellulose conversion could reach to 65 g/L and 72%, respectively.