Significant cases of central cusps, enamel pits, and oral fibromas in tuberous sclerosis complex.

Tuberous sclerosis complex (TSC) is an autosomal dominant disorder in which benign nodular tumors form in the cerebral cortex, cerebellum, and throughout the body causing various symptoms. In this study, we summarized the incidence of dental findings in patients with TSC at our hospital and its association with diseases in various organs. Patients diagnosed with TSC at our hospital between January 2013 and September 2017, and who were examined in the dental and oral surgery department were included in this study. The presence of intraoral manifestations (central cusps, enamel pits, oral fibromas) was examined by means of visual inspection, intraoral photography, and X-ray photography. In addition, the relationship with associated diseases (neurological, cutaneous, cardiac, renal, and pulmonary) according to organ and disease severity was examined. The mean age (± SD) of the 42 TSC patients (19 men and 23 women) was 27.8 ± 14.6 years, of which 24 patients (11 men and 13 women) presented with oral manifestations. Of these patients, seven had central cusps, 10 had enamel pits, and 17 had oral fibromas. The group with central cusps had significantly higher neurological issues in the relationship between intraoral manifestations and associated disease based on the involved organ. The prevalence of central cusps in TSC was 16.7%, which is significantly higher than the 2.6% reported in healthy Japanese subjects. The central cusp is a diagnostic factor alongside the presence of enamel pits and oral fibromas, which can aid in the early diagnosis of TSC by dentists.

Antimicrobial susceptibility surveillance of bacterial isolates recovered in Japan from odontogenic infections in 2013.

We report on the findings of the first antimicrobial susceptibility surveillance study in Japan of isolates recovered from odontogenic infections. Of the 38 facilities where patients representing the 4 groups of odontogenic infections were seen, 102 samples were collected from cases of periodontitis (group 1), 6 samples from pericoronitis (group 2), 84 samples from jaw inflammation (group 3) and 54 samples from phlegmon of the jaw bone area (group 4) for a total of 246 samples. The positivity rates of bacterial growth on culture were 85.3%, 100%, 84% and 88.9%, respectively, for groups 1, 2, 3 and 4. Streptococcus spp. isolation rates according to odontogenic infection group were 22% (group 1), 17.7% (group 3) and 20.7% (group 4). Anaerobic isolation rates were 66.9% (group 1), 71.8% (group 3) and 68.2% (group 4). Drug susceptibility tests were performed on 726 strains excluding 121 strains that were undergrown. The breakdown of the strains subjected to testing was 186 Streptococcus spp., 179 anaerobic gram-positive cocci, 246 Prevotella spp., 27 Porphyromonas spp., and 88 Fusobacterium spp. The isolates were tested against 30 antimicrobial agents. Sensitivities to penicillins and cephems were good except for Prevotella spp. The low sensitivities of Prevotella spp is due to ß-lactamase production. Prevotella strains resistant to macrolides, quinolones, and clindamycin were found. No strains resistant to carbapenems or penems were found among all strains tested. No anaerobic bacterial strain was resistant to metronidazole. Antimicrobial susceptibility testing performed on the S. anginosus group and anaerobic bacteria, which are the major pathogens associated with odontogenic infections, showed low MIC90 values to the penicillins which are the first-line antimicrobial agents for odontogenic infections; however, for Prevotella spp., penicillins combined with ß-lactamase inhibitor showed low MIC90 values.

Roles of macrophage migration inhibitory factor in cartilage tissue engineering.

To obtain stable outcomes in regenerative medicine, understanding and controlling immunological responses in transplanted tissues are of great importance. In our previous study, auricular chondrocytes in tissue-engineered cartilage transplanted in mice were shown to express immunological factors, including macrophage migration inhibitory factor (MIF). Since MIF exerts pleiotropic functions, in this study, we examined the roles of MIF in cartilage regenerative medicine. We made tissue-engineered cartilage consisting of auricular chondrocytes of C57BL/6J mouse, atellocollagen gel and a PLLA scaffold, and transplanted the construct subcutaneously in a syngeneic manner. Localization of MIF was prominent in cartilage areas of tissue-engineered cartilage at 2 weeks after transplantation, though it became less apparent by 8 weeks. Co-culture with RAW264 significantly increased the expression of MIF in chondrocytes, suggesting that the transplanted chondrocytes in tissue-engineered cartilage could enhance the expression of MIF by stimulation of surrounding macrophages. When MIF was added in the culture of chondrocytes, the expression of type II collagen was increased, indicating that MIF could promote the maturation of chondrocytes. Meanwhile, toluidine blue staining of constructs containing wild type (Mif+/+) chondrocytes showed increased metachromasia compared to MIF-knockout (Mif-/-) constructs at 2 weeks. However, this tendency was reversed by 8 weeks, suggesting that the initial increase in cartilage maturation in Mif+/+ constructs deteriorated by 8 weeks. Since the Mif+/+ constructs included more iNOS-positive inflammatory macrophages at 2 weeks, MIF might induce an M1 macrophage-polarized environment, which may eventually worsen the maturation of tissue-engineered cartilage in the long term.

Computer-assisted preoperative simulation for positioning of plate fixation in Lefort I osteotomy: A case report.

Computed tomography images are used for three-dimensional planning in orthognathic surgery. This facilitates the actual surgery by simulating the surgical scenario. We performed a computer-assisted virtual orthognathic surgical procedure using optically scanned three-dimensional (3D) data and real computed tomography data on a personal computer. It helped maxillary bone movement and positioning and the titanium plate temporary fixation and positioning. This simulated the surgical procedure, which made the procedure easy, and we could perform precise actual surgery and could forecast the postsurgery outcome. This simulation method promises great potential in orthognathic surgery to help surgeons plan and perform operative procedures more precisely.

A 2-Stage Reconstruction of the Jaw Using Vascularized Bone and Secondary Alveolar Ridge Augmentation With Particulate Cancellous Bone and Marrow.

PURPOSE: To present the novel technique for reconstruction of the jaw, that facilitates occlusal restoration using dental implants, in cases with wide bony defects from tumor resection. MATERIALS AND METHODS: After alveolar ridge is augmented using titanium mesh tray and particulate cancellous bone and marrow (PCBM) from iliac bone on reconstructed bone, by way of improvement of maxillomandibular relationship for dental implants. RESULTS: This 2-stage surgery underwent successfully in 3 cases. After 2-stage surgery and occlusal reconstruction using dental implant, the patients experienced no complications, and received satisfaction with results functionally and aesthetically. CONCLUSIONS: Our results suggest that, in cases where bone defect is over a wide area, in addition to vascularized bone grafts, secondary alveolar ridge augmentation using a titanium mesh tray and PCBM on grafted bone can provide satisfactory occlusion further to improvement of facial form.

Vision-based markerless registration using stereo vision and an augmented reality surgical navigation system: a pilot study.

BACKGROUND: This study evaluated the use of an augmented reality navigation system that provides a markerless registration system using stereo vision in oral and maxillofacial surgery. METHOD: A feasibility study was performed on a subject, wherein a stereo camera was used for tracking and markerless registration. The computed tomography data obtained from the volunteer was used to create an integral videography image and a 3-dimensional rapid prototype model of the jaw. The overlay of the subject's anatomic site and its 3D-IV image were displayed in real space using a 3D-AR display. Extraction of characteristic points and teeth matching were done using parallax images from two stereo cameras for patient-image registration. RESULTS: Accurate registration of the volunteer's anatomy with IV stereoscopic images via image matching was done using the fully automated markerless system, which recognized the incisal edges of the teeth and captured information pertaining to their position with an average target registration error of < 1 mm. These 3D-CT images were then displayed in real space with high accuracy using AR. Even when the viewing position was changed, the 3D images could be observed as if they were floating in real space without using special glasses. CONCLUSION: Teeth were successfully used for registration via 3D image (contour) matching. This system, without using references or fiducial markers, displayed 3D-CT images in real space with high accuracy. The system provided real-time markerless registration and 3D image matching via stereo vision, which, combined with AR, could have significant clinical applications.

Short Lingual Osteotomy Using a Piezosurgery Ultrasonic Bone-Cutting Device During Sagittal Split Ramus Osteotomy.

Short lingual osteotomy is a useful method for the performance of sagittal split ramus osteotomy involving interference between the proximal and distal bone fragments when lateral differences exist in the setback distance. However, this procedure occasionally results in abnormal fracture and nerve injury; expert surgical skill is thus required. We herein describe a novel technique involving the use of an ultrasonic bone-cutting device (Piezosurgery; Mectron Medical Technology, Carasco, Italy) for vertical osteotomy posterior to the mandibular foramen. Successful short lingual osteotomy was performed using this technique with avoidance of abnormal fracture and neurovascular bundle damage.

Maxillary protraction in patients with cleft lip and palate in mixed dentition: cephalometric evaluation after completion of growth.

Objective : To clarify the short- and long-term effects of maxillary protraction (MP) in mixed dentition in patients with unilateral cleft lip and palate (UCLP). Design : Retrospective study. Setting : University of Tokyo Hospital. Patients and Intervention : Eleven Japanese patients with UCLP in mixed dentition were treated with MP and followed up until the completion of growth. Multibracket treatment had been performed after MP treatment in all patients. Main Outcome Measure : Lateral cephalograms taken before and after MP and after completion of growth were used. Posterior and anterior vertical reference lines (PV, AV) were used to measure the horizontal movements of point A, pogonion, and maxillary first molar (U6). SNA, SNB, ANB, maxillary and mandibular length, mandibular plane angle, Wits value, upper incisor inclination, overjet, and overbite were also measured. Results : Large variation was found in the effects of MP, and five patients eventually required orthognathic surgery. In average change with MP, the maxilla showed favorable forward growth. Point A had moved forward from PV but not AV. The mandible rotated backward. However, ANB and the Wits value did not improve. U6 moved forward, and the overjet improved. After MP, the skeletal Class III relationship became severe. Conclusions : MP was effective as an early treatment for UCLP patients. However, its effects showed large variation and were in conflict with facial growth. Conscientious explanation of the expected effects and associated problems should be given to the patients/parents before its application.

A novel technique for preventing skin pressure sores using a rubber tube during surgical treatment of mandibular condyle fractures.

Craniofacial surgery occasionally results in sores and necrosis of the facial skin because of pressure from surgical instruments. During surgical treatment of mandibular condylar process fractures, the main mandibular fragment is routinely retracted downward using a wire to achieve a satisfactory anatomic reduction. This procedure may injure the facial skin. This potential complication is easily overlooked by medical staff, but it is easily preventable. We herein describe a method of using a rubber tube to avoid causing pressure sores of the facial skin during surgical treatment of mandibular condylar process fractures.

Clinical presentation of epignathus teratoma with cleft palate; and duplication of cranial base, tongue, mandible, and pituitary gland.

A 2-day-old girl was diagnosed with an oral epignathus teratoma and an uncommon combination of orofacial malformations including cleft palate; tongue, mandible, cranial base, cervical vertebrae, lower lip, and pituitary gland duplications; and fistula of the glabella and lower lip. Computed tomography revealed that the mass within the nasal cavity had tooth-like calcifications and protruded into the nasopharynx and oral cavity. It was implanted on the anterior wall of the body of the sphenoid bone and was accompanied with mandibular duplication. Magnetic resonance imaging detected duplication of the pituitary gland and confirmed the absence of intracranial communication of the nasopharyngeal mass. The teratoma did not cause respiratory obstruction; however, the patient required continuous nasogastric tube feeding. Usually, an epignathus teratoma is associated with few midline defects and can be corrected with multiple interventions at different time points. The current study describes the surgical procedure comprising excision of the tumor along with reconstructive surgeries of the mandible, tongue, and fistulae undertaken when the infant reached 7 months of age. The cleft palate was repaired at 18 months of age using the Kaplan buccal flap method. Histopathologic examination confirmed a grade 0 teratoma covered with keratinized skin and containing pilosebaceous and sweat glands, adipose tissue, and smooth muscle. The long-term success of this intervention was determined at the follow-up examination conducted at 3 years of age, with no signs of the teratoma recurrence observed.

Evaluation of mandibular hypoplasia in patients with hemifacial microsomia: a comparison between panoramic radiography and three-dimensional computed tomography.

OBJECTIVE: To compare the accuracy of three-dimensional computed tomography (3D-CT) and panoramic radiography in the evaluation of mandibular hypoplasia in patients with hemifacial microsomia (HFM). DESIGN: Retrospective study of imaging data. Setting : Images selected from the archives of the University of Tokyo Hospital. SUBJECTS: Twenty patients with unilateral HFM who had undergone both panoramic radiography and 3D-CT in the same period. METHOD: Mandibular deformities were classified according to the Pruzansky classification; eight patients had Grade I deformity and 12 patients had Grade II deformity. Ramus heights were measured on both panoramic radiographs and 3D-CT. MAIN OUTCOME MEASURES: Magnification in panoramic radiographs and extent of mandibular asymmetry as estimated by the affected/unaffected side ratio based on two methods were examined. The Pearson product-moment correlation coefficient was used to estimate correlations between parameters. RESULTS: The magnification of ramus heights on panoramic radiographs showed large variations in Grade II patients. The affected/unaffected side ratio estimated by the two methods showed a strong correlation in Grade I patients (correlation coefficient 0.99; p < .0001). Conversely, a weak correlation was seen in Grade II patients (correlation coefficient 0.77; p  =  .0036), and affected/unaffected side ratios from panoramic radiographs were both over- and underestimated. CONCLUSIONS: The accuracy of evaluation using panoramic radiography was fairly reliable in Grade I patients. Conversely, accuracy was poor in Grade II patients, and evaluation using 3D-CT seems preferable. The combination of two methods with careful consideration is recommended for clinical applications.

[Oral surgery].

Regenerative medicine is widely noticed as advanced medicine that treats acquired or congenital tissue defects. In the field of oral surgery, congenital anomalies, tissue defects caused by tumor excision or trauma, periodontal diseases, or loss of teeth are regarded as the subjects of regenerative medicine. A maxillofacial area is expected to be applied to early clinical application, since it is lightly loaded compared to limbs or trunk and needs no large tissues. In this chapter, we will explain the current situation and future prospects of regenerative medicine, concerning maxillofacial bones, nasal cartilages, and periodontal tissues, and teeth.

The roles of prostanoids, leukotrienes, and platelet-activating factor in bone metabolism and disease.

The production of a variety of lipid mediators is enhanced in bone-resorptive diseases such as osteoporosis, rheumatoid arthritis, osteoarthritis, and periodontitis. Prostaglandin E(2) (PGE(2)) is one of the most notable lipid mediators of bone remodeling, and has been linked clinically to many bone-resorptive diseases. In vitro studies with bone cell cultures have demonstrated that the bone-resorptive activity of PGE(2), which is mediated by receptor activator of NF-kappaB ligand (RANKL), is key for the induction of osteoclast formation. Furthermore, interleukin (IL)-1- and IL-6-stimulated bone resorption involves PGE(2) production. In addition to its bone-resorptive effects, PGE(2) promotes bone formation in vitro by stimulating osteoblastic proliferation and differentiation. The multifaceted nature of PGE(2) makes it difficult to discern its role during bone remodeling. Leukotrienes (LTs), and particularly LTB(4), have also been implicated in bone remodeling and disease-specifically in rheumatoid arthritis. Moreover, recent studies from our laboratory have shown that platelet-activating factor (PAF) receptor-deficient mice develop only mild osteoporosis. Osteoclast survival in these mice is shortened and osteoclastic bone resorption is impaired. This review article focuses on these families of lipids and their function during bone metabolism and disease.

Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology.

Ideally, artificial bones should be dimensionally compatible with deformities, and be biodegradable and osteoconductive; however, there are no artificial bones developed to date that satisfy these requirements. We fabricated novel custom-made artificial bones from alpha-tricalcium phosphate powder using an inkjet printer and implanted them in ten patients with maxillofacial deformities. The artificial bones had dimensional compatibility in all the patients. The operation time was reduced due to minimal need for size adjustment and fixing manipulation. The postsurgical computed tomography analysis detected partial union between the artificial bones and host bone tissues. There were no serious adverse reactions. These findings provide support for further clinical studies of the inkjet-printed custom-made artificial bones.

Cost of establishing a general dentistry department in a small or medium-sized hospital.

To contribute to future dental healthcare policies, this study compiled data on hospital expenses and follow-ups conducted after a hospital dentistry department was established. In addition, the management status and reports on the utility and challenges of establishing a dentistry department were analyzed. The dentistry department was established through fund raising and inaugurated in May 2009. The depreciation period was set at 7 years, and income and expenditure during the 7 years 8 months after opening were compiled. In total, 17.22 million yen was needed for the dentistry department. The average income from dental care was 21.59 million yen per year, and expenditure amounted to 21.54 million yen per year. The findings indicated that a general dentist able to systemically manage patients was essential in a chronic-care hospital. Moreover, the present findings indicate that if general dentistry consultations were performed without excessive investments, after adjusting for personnel expenses, such an initiative would neither yield considerable income nor produce a substantial deficit. Finally, it is imperative to develop staff who are familiar with the costs and management of hospital dentistry and to increase medical fees for consultations with elderly patients.

Investigating the Efficacy of Intraoral Wet Sheets.

OBJECTIVE: It is important that oral care is effective, efficient, and economical. Herein, we investigated the efficacy of intraoral wet sheets for oral care in comparison with sponge brushes. METHODS: We completed a Plaque Control Record (PCR) after observing intraoral plaque using a plaque disclosure test in healthy volunteers. After the teeth were cleaned for 3 minutes using a wet sheet, the test was repeated and the PCR was completed. The same method was performed using a sponge brush on the same subject under the same conditions 1 week later. The t test was used to analyze PCR findings. RESULTS: Ten healthy subjects were enrolled (mean age, 28.6 years). The PCR values improved from 44.0% before to 30.9% after use of the wet sheet. The post-cleaning PCR was significantly lower. The PCR values improved from 55.0% before to 50.2% after use of the sponge brush. CONCLUSIONS: The PCR improvement was greater when using the wet sheet. In all cases, the wet sheet was highly effective at smoothing tooth surfaces. Intraoral wet sheets may be an option for oral care performed by nurses and caregivers. Compared to the sponge brush, the intraoral wet sheet can save time and reduce costs.

Clinical application of artificial bone in the maxillofacial region.

Hard tissue reconstruction is very useful for bony defects of the maxillofacial region. Autogenous bone, allogeneic bone, and artificial bone have been used to reconstruct maxillofacial bone; however, the use of autogenous bone involves high surgical invasiveness because of the need to harvest the bone. The use of allogeneic bone is associated with infections, raises ethical concerns, and is not widely used in Japan. Artificial bone has several advantages, including no need for bone harvesting, excellent biocompatibility, and a relatively easy surgical procedure. Use of artificial bone avoids the much greater invasiveness of harvesting bone, and several types of artificial bone have been developed. Design requirements for artificial bone include surgical manipulability, structural compatibility with the defective area, support properties, and the ability to induce bone regeneration; however, no artificial bone meeting all these requirements has yet been developed. Artificial bone is used in many patients in our medical center, and we have been active in developing the next generation of artificial bone with better properties. In this article, we present a case history and discuss the future development of artificial bone for use in maxillofacial reconstruction.

[Clinical application of bone regeneration by in vivo tissue engineering].

With regard to the graft materials, cortical bone block, vascularized bone flap and particulate cancellous bone and marrow (PCBM) have been used for the reconstruction of maxillofacial skeleton. Needless to say, the aim of cortical bone block and vascularized bone flap transfer is the transplantation of bony tissue of its own. On the other hand, the main objective of PCBM grafting is the transplant of osteogenic stem cells derived from uncommitted marrow mesenchymal cells. After PCBM grafting, active new bone formation occurs from osteogenic stem cells followed by bone remodeling and replacement of host bone. This process means that PCBM grafting is the method of bone regeneration that is based on in vivo tissue engineering. In this paper, clinical application of PCBM grafting for the reconstruction of maxillofacial skeleton is introduced by showing the repair of maxillary bony defect of cleft lip and palate patients, alveolar ridge augmentation and the reconstruction of large mandibular segmental defects.

Periostin contributes to the maturation and shape retention of tissue-engineered cartilage.

Traditional tissue-engineered cartilage applied in clinical practice consists of cell suspensions or gel-form materials for which it is difficult to maintain their shapes. Although biodegradable polymer scaffolds are used for shape retention, deformation after transplantation can occur. Here, we showed that periostin (PN), which is abundantly expressed in fibrous tissues, contributes to the maturation and shape retention of tissue-engineered cartilage through conformational changes in collagen molecules. The tissue-engineered cartilage transplanted in an environment lacking PN exhibited irregular shapes, while transplants originating from chondrocytes lacking PN showed limited regeneration. In the in vitro assay, PN added to the culture medium of chondrocytes failed to show any effects, while the 3D culture embedded within the collagen gel premixed with PN (10 µg/mL) enhanced chondrogenesis. The PN-mediated collagen structure enhanced the mechanical strength of the surrounding fibrous tissues and activated chondrocyte extracellular signaling by interstitial fibrous tissues.

A Comparative Study of Oral Health Status between International and Japanese University Student Patients in Japan.

Background: The number of international students enrolled in universities in Japan is increasing. To provide better oral care services for international students, we have to understand their oral environment and dental health behaviors. However, few studies have investigated the oral health status of international university students. The object of the present study was to clarify the current oral status of international university students. Methods: The subjects were students who visited the dental department at the University of Tokyo's Health Services Center between April 2012 and March 2013. Our medical records were reviewed with regard to the following items: attributes (nationality, gender, and age); chief complaint (reason for visit); history of dental treatment; mean number of decayed (D), missing (M) or filled (F) teeth as a single (DMFT) index; degree of calculus deposition; gingival condition; and oral hygiene status. Results: The records of 554 university students (138 international and 416 non-international students) were analyzed; 88.4% of the 138 international students were from Asian countries (n = 122), of which 47.1% were from China and 10.9% from Korea, followed by North America (5.8%), Europe (4.3%), and Africa (1.5%). Although no significant differences were found regarding the history of dental treatment between international and non-international students (49.3% and 48.8%, respectively), international students had a significantly higher dental caries morbidity rate (60.1%) than non-international students (49.0%). The international students showed a significantly higher DMFT value compared with the non-international students: 5.0 and 4.0 per individual, respectively. Severe calculus deposition was observed in international students compared with non-international students (51.9% and 31.7%, respectively). Conclusions: The international university students had poorer oral health status than the non-international students, even though the result might include many uncertainties and possible biases.