Healing effects of monomer and dimer resveratrol in a mouse periodontitis model.

BACKGROUND: The antioxidant and anti-inflammatory effects of resveratrol have been reported previously. Particularly, monomeric trans-resveratrol has been demonstrated to produce positive effects in various pathological processes. We reported previously that resveratrol dimer-rich melinjo extract, among others, caused bone healing, decreased local oxidative damage, and activated antioxidants nuclear factor erythroid 2-related factor 2 (Nrf2) pathways in a mouse model of experimentally induced periodontitis (EP). This study aimed to compare the bone-healing effects of the resveratrol monomer to the resveratrol dimer (gnetin C found in melinjo seed extract) in a model of EP and investigate the involvement of Nrf2 for effects of either form of resveratrol. METHODS: EP was induced experimentally in mice by placement of a 9 - 0 silk ligature around the left second molar. Mice received 10 mg/kg of either resveratrol monomer or dimer intraperitoneally on day 15 after induction of EP. The bone level around the ligated teeth was measured over time, and levels of proinflammatory cytokines and oxidative stress were measured in the periodontal tissues around the ligated teeth. RESULTS: Resveratrol dimer induced greater periodontal bone healing as compared to that related to use of the resveratrol monomer. It appears that healing of periodontal bone in either group was likely related to master regulation of antioxidant nuclear factor erythroid 2-related factor 2 (Nrf2) significantly. Downregulation of IL-1ß, a proinflammatory cytokine was also demonstrated in the resveratrol dimer group. CONCLUSION: Our results showed that administration of resveratrol in either dimer form or the monomeric form reduced periodontal bone loss with greater inhibition of bone loss being demonstrated in the dimer group as compared to the monomer group and that these effects were related in all likelihood to decreased oxidative stress and hence reduction in local inflammation.

Oral infectious bacteria in dental plaque and saliva as risk factors in patients with esophageal cancer.

BACKGROUND: High levels of periodontopathic bacteria as well as Streptococcus anginosus were detected in cancer tissue from patients with esophageal cancer. An association between oral infectious bacteria and esophageal cancer has been reported. METHODS: Characteristics of the oral microbiota and periodontal conditions were studied as clinicopathologic factors in patients with esophageal cancer. The study included 61 patients with esophageal cancer and 62 matched individuals without any cancers. Samples of subgingival dental plaque and unstimulated saliva were collected to evaluate the prevalence and abundance of the following oral bacteria using a real-time polymerase chain reaction assay: Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, Porphyromonas gingivalis, Prevotella intermedia, Tannerella forsythia, Treponema denticola, and S. anginosus. RESULTS: In the cancer group, the prevalence of all bacteria, with the exception of F. nucleatum, in dental plaque; the prevalence of A. actinomycetemcomitans in saliva; the abundance of all bacteria, with the exception of F. nucleatum and P. intermedia, in dental plaque; and the abundance of A. actinomycetemcomitans and S. anginosus in saliva were significantly higher. Furthermore, a logistic regression analysis suggested that the prevalence of T. forsythia and S. anginosus in dental plaque and of A. actinomycetemcomitans in saliva, as well as a drinking habit, were associated with a high risk of esophageal cancer, with a high odds ratio. CONCLUSIONS: The current findings have potential implications for the early diagnosis of esophageal cancer.

A comparative questionnaire study of patient complaint levels between magnetostrictive ultrasonic scaler (Cavitron® ) and piezoelectric ultrasonic scalers.

OBJECTIVES: Ultrasonic scalers often cause an uncomfortable feeling to patients during the procedure. This study was conducted to compare patient complaint levels between magnetostrictive (M-USSC) and piezoelectric ultrasonic scalers (P-USSC) during supragingival scaling. METHODS: This study enrolled 82 subjects who received supportive periodontal therapy for at least 2 years. At each recall visit, probing pocket depth (PPD), bleeding on probing (BOP) and O'Leary plaque control record (O'PCR) were recorded. Then, supragingival scaling was performed using P-USSC (Varios or Petit Piezo) at the first visit and M-USSC (Cavitron) at the second visit. After each treatment, a questionnaire survey was performed using the Wong-Baker Faces Pain Scale for six items, which included the typical complaints occurring during ultrasonic scaling. RESULTS: The scores for all the six items related to patient complaints were greater for P-USSC than for M-USSC (p < 0.001). Patient complaints such as discomfort, pain, sound, vibration, hyperesthesia and length of treatment time were ameliorated in 74%, 65%, 80%, 67%, 57% and 53% of subjects using M-USSC, respectively. On the other hand, only <5% of subjects showed deterioration in terms of each complaint. CONCLUSION: This study suggested that M-USSC causes fewer patient complaints during supragingival scaling than P-USSC. M-USSC may improve patient motivation and compliance and may contribute towards achieving successful treatment outcomes. However, this result could differ depending on the shape of the tip and the insert and treatment site. Further research will be required under various conditions.

Development of Microdroplet Generation Method for Organic Solvents Used in Chemical Synthesis.

Recently, chemical operations with microfluidic devices, especially droplet-based operations, have attracted considerable attention because they can provide an isolated small-volume reaction field. However, analysis of these operations has been limited mostly to aqueous-phase reactions in water droplets due to device material restrictions. In this study, we have successfully demonstrated droplet formation of five common organic solvents frequently used in chemical synthesis by using a simple silicon/glass-based microfluidic device. When an immiscible liquid with surfactant was used as the continuous phase, the organic solvent formed droplets similar to water-in-oil droplets in the device. In contrast to conventional microfluidic devices composed of resins, which are susceptible to swelling in organic solvents, the developed microfluidic device did not undergo swelling owing to the high chemical resistance of the constituent materials. Therefore, the device has potential applications for various chemical reactions involving organic solvents. Furthermore, this droplet generation device enabled control of droplet size by adjusting the liquid flow rate. The droplet generation method proposed in this work will contribute to the study of organic reactions in microdroplets and will be useful for evaluating scaling effects in various chemical reactions.

Isolation of cellulase-producing Microbulbifer sp. from marine teleost blackfish (Girella melanichthys) intestine and the enzyme characterization.

Most animals cannot digest cellulose but have symbiotic microbes that degrade the matrix polysaccharides of plant matter. Herbivorous and omnivorous marine fish are similarly expected to rely on symbiotic microbes, but reports to date on cellulase-producing bacteria in fish intestines are limited. Here, we report the isolation of new cellulase-producing bacteria from the marine omnivorous teleost, blackfish (Girella melanichthys), and the characterization of cellulase activity. Three strains of cellulase-producing bacteria sp. were isolated from the hindgut of wild G. melanichthys. The strains of cellulase-producing bacteria grew in medium with artificial seawater but not in NaCl alone. Growth was optimum at 20-35°C, but there was no growth at 40°C, suggesting adaptation in a marine environment at a low temperature. Isolates were identified to Microbulbifer sp., among which GL-2 strain produced a high enzyme activity. The GL-2 strain was further used for enzyme characterization with carboxymethyl cellulose (CMC) as the substrate. Maximum activity of the cellulase was observed at 60°C, and activity was more than 30% at 20°C, while commercial cellulase Enthiron showed an optimum activity at 50°C and 17% activity at 20°C. Hydrolytic products by GL-2 cellulase were cellobiose but not glucose, suggesting a deficiency of ß-glucosidase activity. Active gel electrophoresis containing CMC showed five bands, suggesting several cellulolytic enzymes. The GL-2 strain and its enzyme are potential probiotics for aquaculture fish and the industrial production of cellobiose.

Effect of Amelotin on Bone Growth in the Murine Calvarial Defect Model.

Amelotin (AMTN) is a protein that is expressed during the maturation of dental enamel and has important role in enamel hydroxyapatite mineralization. However, it is not well understood whether AMTN has a strong mineral-promoting ability in bone. In this study, the effect of AMTN on bone healing was investigated using mice calvarial defect model in vivo, and the expression of bone marker genes and cell proliferation were investigated to clarify the role of AMTN in bone mineralization using mouse osteogenic cells (MC3T3-E1) in vitro. Collagen membranes, with or without recombinant human (rh) AMTN, were applied to calvarial defects created on the parietal bones of C57BL/6N mice. Microcomputed tomography and histological observation revealed that the defect largely filled with mineralized tissue by the rhAMTN-containing membrane in eight weeks. Moreover, CD31 positive cells were observed in the newly formed mineralized tissue and around the rhAMTN-containing membrane. In the presence of rhAMTN, the expression of the Spp1 gene in MC3T3-E1 cells significantly increased within ten days in an osteoinductive medium. Moreover, rhAMTN significantly enhanced MC3T3-E1 cell proliferation. These findings indicate that AMTN positively influences bone repair by promoting hydroxyapatite mineralization.

Active microdroplet merging by hydrodynamic flow control using a pneumatic actuator-assisted pillar structure.

This paper describes a microdroplet merging device that can actively control the merging of various droplets under a wide range of flow conditions, using a simple structure. The microdroplets were trapped and merged in a wide chamber divided by pillars, and their behavior was controlled by two horizontal pneumatic microactuators. Hydrodynamic flow control by the actuation was evaluated numerically, and the trapping and merging of droplets were achieved experimentally and controlled via pressure applied to the microactuators. Furthermore, two independently generated droplets were merged under four different modes, ranging from no merging to four-droplet merging, with different ratios and volumes. The pneumatic actuators allowed not only the control of the number of merged droplets, but also a wide range of applied droplet volumes. The device was fabricated simply using a single-layer PDMS (polydimethylsiloxane) structure, and the continuous merging performance operated using only hydrodynamic flow control without any surfactant. Finally, chemical synthesis of a metal complex was performed by the droplet merging method. Crystallization of the complex was visualized in real time, and the synthesis was verified by ultraviolet-visible spectroscopy.