Hydrophilic carrageenan functionalized magnetic carbon-based framework linked by silane coupling agent for the enrichment of N-glycopeptides from human saliva.

In this work, a magnetic graphene material coated with mesoporous silica was selected as the substrate, 3-glycidoxypropyltrimethoxysilane and polyethyleneimine were sequentially bonded through chemical reactions, and then carrageenan was successfully introduced by electrostatic interaction; finally, hydrophilic nanocomposite material was prepared. Due to the large number of hydrophilic groups, and polyethyleneimine was connected by means of chemical bonds, this material exhibits good hydrophilicity and stability for glycopeptide enrichment. In the actual enrichment process, nanomaterial exhibits high selectivity (1:500), high sensitivity (2 fmol), and good repeatability (five cycles). In addition, the synthesized material also shows a good enrichment effect in the face of actual complex biological samples, which captured 40 N-glycopeptides from human saliva, indicating the application potential for enrichment of N-glycopeptides.

Efficient separation of phosphopeptides employing a Ti/Nb-functionalized core-shell structure solid-phase extraction nanosphere.

A strategy for effectively enriching global phosphopeptides was successfully developed by using ammonia methyl phosphate (APA) as a novel chelating ligand and Ti4+ and Nb5+ as double functional ions (referred to as Fe3O4@mSiO2@APA@Ti4+/Nb5+). With the advantage of large specific surface area (151.1 m2/g), preeminent immobilized ability for metal ions (about 8% of total atoms), and unbiased enrichment towards phosphopeptides, Fe3O4@mSiO2@APA@Ti4+/Nb5+ displays high selectivity (maximum mass ratio ß-casein to BSA is 1:1500), low limit of detection (LOD, as low as 0.05 fmol), good relative standard deviation (RSD, lower than 7%), recovery rate of 87% (18O isotope labeling method), outstanding phosphopeptide loading capacity (330 µg/mg), and at least five times re-use abilities. In the examination of the actual sample, 24 phosphopeptides were successfully detected in saliva and 4 phosphopeptides were also selectively extracted from human serum. All experiments have shown that Fe3O4@mSiO2@APA@Ti4+/Nb5+ exhibits exciting potential in view of the challenge of low abundance of phosphopeptides. Graphical abstract.

Post-synthesis of boric acid-functionalized magnetic covalent organic framework as an affinity probe for the enrichment of N-glycopeptides.

A novel type of boric acid-functionalized magnetic covalent organic framework (mCOF) with polyethyleneimine (PEI) as a linker (denoted as mCOF@PEI@B(OH)2) has been prepared through a post-synthesis strategy, which points out an achievable path for the construction of boronic acid-functionalized COFs. Based on the boric acid chemistry, the obtained core-shell structured mCOF@PEI@B(OH)2 can selectively isolate glycopeptides through the modified boronic acid groups. The mCOF@PEI@B(OH)2 exhibits excellent performance with good reusability (ten cycles), low detection limit (0.5 fmol·µL-1), size-exclusion effect, and relatively high loading capacity (80 µg·mg-1), recovery yield (94.9 ± 2.8%), and selectivity (HRP digests:BSA digests = 1:500). Detection is done by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). In addition, 37 endogenous glycopeptides are captured from human saliva with mCOF@PEI@B(OH)2, providing effective proofs for its capability to capture low-abundance glycopeptides from actual biological samples.

Postsynthesis of zwitterionic hydrophilic composites for enhanced enrichment of N-linked glycopeptides from human serum.

RATIONALE: Glycosylation of proteins plays an important role in life activities, but the concentration of naturally occurring glycopeptides is usually relatively low, and glycosylation has microfacies heterogeneity, so direct mass spectrometry is not feasible. Therefore, selective enrichment of glycopeptides before mass spectrometry has turned into an urgent problem to be resolved. METHODS: Herein, the zwitterionic L-cysteine functionalized hydrophilic graphene oxide composite (GO@PDA@MIL-125-NH2 @Au@L-Cys) was prepared via a postsynthetic method. The obtained material was used for glycopeptide enrichment. The enriched peptides were then detected using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOFMS) to demonstrate the enrichment performance of the material. RESULTS: In the actual enrichment process, GO@PDA@MIL-125-NH2 @Au@L-Cys nanomaterials exhibited high selectivity (1:1000), outstanding sensitivity (0.5 fmol), and excellent repeatability for the enrichment of glycopeptides. In addition, the proposed material showed good performance in the enrichment of glycopeptides from complex biosamples; 56 glycopeptides were detected from 2 µL of human serum using MALDI-TOFMS. CONCLUSIONS: The experimental results showed that GO@PDA@MIL-125-NH2 @Au@L-Cys exhibited excellent performance on glycopeptide analysis. It has great potential in the enrichment of glycopeptides and provides new ideas for synthetic materials with better enrichment properties in the future.

In situ synthesis of a novel metal oxide affinity chromatography affinity probe for the selective enrichment of low-abundance phosphopeptides.

RATIONALE: Due to the dynamic nature of phosphorylation states and the low stoichiometry of phosphopeptides, it is still a challenge to efficiently capture phosphopeptides from complex biological samples before mass spectrometry analysis. Among the enrichment strategies, metal oxide affinity chromatography (MOAC) is one of the most widely used and the one with the most potential. It is based on reversible Lewis acid-base interactions between the metal oxides and the negatively charged phosphate groups to achieve the specific selection of phosphopeptides. METHODS: A novel MOAC affinity probe, denoted as G@PDA@ZrO2 , was successfully synthesized by in situ grafting ZrO2 onto the surface of graphene (G) modified with polydopamine (PDA). The novel MOAC probe thus obtained was used for phosphopeptide enrichment. RESULTS: This novel MOAC affinity probe when used to selectively enrich phosphopeptides from standard protein digest solutions exhibited a high selectivity (ß-casein:bovine serum albumin = 1:1000), a low detection limit (4 fmol), and a high loading capacity (400 mg/g). At the same time, the experimental results proved that G@PDA@ZrO2 had great recyclability (five cycles), stability, and reproducibility. Subsequently, G@PDA@ZrO2 was applied to enrich phosphopeptides from human saliva and human serum, in which 25 and 4 phosphopeptide peaks, respectively, were detected. CONCLUSIONS: This novel MOAC affinity probe (G@PDA@ZrO2 ) showed good performance in enriching phosphopeptides. Thus, G@PDA@ZrO2 has good potential in phosphopeptidomics analysis.

SERS-based immunocapture and detection of pathogenic bacteria using a boronic acid-functionalized polydopamine-coated Au@Ag nanoprobe.

A surface-enhanced Raman scattering (SERS)-based immunocapture nanoprobe is described for the detection of pathogenic bacteria. The probe uses boronic acid-functionalized polydopamine-coated Au@Ag nanoparticles as an advanced SERS nanotag. Modified magnetic IgG@Fe3O4 nanoparticles are used for magnetic separation. Au@Ag@PDA nanoparticles, where PDA stands for polydopamine, were functionalized with boronic acid to bind to pathogenic bacteria and induce signal amplification. The Raman signal is amplified 108 times when the SERS tag binds the surface of bacteria. The SERS spectra exhibit fingerprint-like patterns that enable bacterial classification. The results of principal component analysis (PCA) and hierarchical cluster analysis (HCA) of the spectral regions were compared. The bacterial surface protein and glycan signals (1300-1450 cm-1) were the best regions for bacterial classification. Staphylococcus aureus, Escherichia coli, Shigella dysenteriae, Pseudomonas aeruginosa, and Klebsiella pneumonia were successfully classified by this method. The lowest detection limit was 10 colonies/mL (CFU·mL). The assay can be completed within 30 min. Conceivably, this method may be extended to the quantitative detection or classification of bacteria under various other conditions. Graphical abstract Schematic representation of immunocapture and detection of pathogenic bacteria using boronic acid-functionalized polydopamine-coated Au@Ag nanoprobe through the bacterial surface protein and glycan signals. Green arrow: laser; black arrow: SERS; red ball: bacteria; grey ball: IgG@Fe3O4; golden ball: boronic acid-functionalized Au@Ag@PDA.

Binary magnetic metal-organic frameworks composites: a promising affinity probe for highly selective and rapid enrichment of mono- and multi-phosphopeptides.

A binary magnetic metal-organic framework (MOF)-functionalized material (magG@PDA@Ni-MOF@Fe-MOF) was prepared through grafting Ni-MOF and Fe-MOF on magnetic (Fe3O4) graphene with polydopamine (PDA) as a middle layer. Compared with single MOFs functionalized materials (magG@PDA@Ni-MOF and magG@PDA@Fe-MOF) under the same conditions, magG@PDA@Ni-MOF@Fe-MOF not only displays lower detection limits (4 fmol) and selectivity (1:1000), but also has better enrichment efficiency for both multi- and monophosphopeptides. Other than this, magG@PDA@Ni-MOF@Fe-MOF exhibits fine reusability (five cycles) and rapid enrichment property (1 min), and 24 phosphopeptides were detected when it was applied to the analysis of human saliva. Graphical abstractThe strategy of preparing a binary magnetic metal-organic framework (MOF)-functionalized material (magG@PDA@Ni-MOF@Fe-MOF) through grafting Ni-MOF and Fe-MOF on magnetic graphene with polydopamine (PDA) as a middle layer.

Pneumatic microvalve-based hydrodynamic sample injection for high-throughput, quantitative zone electrophoresis in capillaries.

A hybrid microchip/capillary electrophoresis (CE) system was developed to allow unbiased and lossless sample loading and high-throughput repeated injections. This new hybrid CE system consists of a poly(dimethylsiloxane) (PDMS) microchip sample injector featuring a pneumatic microvalve that separates a sample introduction channel from a short sample loading channel, and a fused-silica capillary separation column that connects seamlessly to the sample loading channel. The sample introduction channel is pressurized such that when the pneumatic microvalve opens briefly, a variable-volume sample plug is introduced into the loading channel. A high voltage for CE separation is continuously applied across the loading channel and the fused-silica capillary separation column. Analytes are rapidly separated in the fused-silica capillary, and following separation, high-sensitivity MS detection is accomplished via a sheathless CE/ESI-MS interface. The performance evaluation of the complete CE/ESI-MS platform demonstrated that reproducible sample injection with well controlled sample plug volumes could be achieved by using the PDMS microchip injector. The absence of band broadening from microchip to capillary indicated a minimum dead volume at the junction. The capabilities of the new CE/ESI-MS platform in performing high-throughput and quantitative sample analyses were demonstrated by the repeated sample injection without interrupting an ongoing separation and a linear dependence of the total analyte ion abundance on the sample plug volume using a mixture of peptide standards. The separation efficiency of the new platform was also evaluated systematically at different sample injection times, flow rates, and CE separation voltages.

Post-synthesis modification of covalent organic frameworks for ultrahigh enrichment of low-abundance glycopeptides from human saliva and serum.

In this study, a novel type of covalent organic framework (COF) material rich in boronic acid sites was prepared through post-synthesis modification (TbBD@PEI@Au@4-MPBA). The surface of COF material had abundant carboxylic acid groups, which could bind a large amount of polyethyleneimine (PEI) through electrostatic interaction. At the same time, the amino groups on the PEI can be grafted with Au nanoparticles (Au NPs) in situ, and then 4-mercaptophenylboronic acid (4-MPBA) was modified by the reaction of Au and sulfhydryl groups. The massive grafting of boronic acid groups made the material's enrichment effect on glycopeptides expected. The results of experiments indicated that the composite material has high sensitivity (5 amol µL-1) and selectivity (1:1000). In addition, the material has outstanding stability and reusability, with a load capacity of about 100 mg g-1 and a recovery of 99.3 ± 2.2%. What's more, after enriched by TbBD@PEI@Au@4-MPBA, 56 endogenous glycopeptides from fresh human saliva were detected by MALDI-TOF MS, 56 unique glycopeptides corresponding to 31 glycoproteins from human saliva and 513 unique glycopeptides corresponding to 208 glycoproteins from serum of throat cancer patient were detected by nano-LC-MS/MS, respectively, which was expected to be applied to glycoproteomics research.

Membrane-based emitter for coupling microfluidics with ultrasensitive nanoelectrospray ionization-mass spectrometry.

An integrated poly(dimethylsiloxane) (PDMS) membrane-based microfluidic emitter for high-performance nanoelectrospray ionization mass spectrometry has been fabricated and evaluated. The ∼100-µm-thick emitter was created by cutting a PDMS membrane that protrudes beyond the bulk substrate. The reduced surface area at the emitter enhances the electric field and reduces wetting of the surface by the electrospray solvent. As such, the emitter enables highly stable electrosprays at flow rates as low as 10 nL/min and is compatible with electrospray solvents containing a large organic component (e.g., 90% methanol). This approach enables facile emitter construction and provides excellent stability, reproducibility, and sensitivity as well as compatibility with multilayer soft lithography.

One-step preparation of carbonaceous spheres rich in phosphate groups via hydrothermal carbonization for effective phosphopeptides enrichment.

A green strategy was developed to prepare carbonaceous spheres rich in phosphoric acid groups on the surface with D-Glucose 6-phosphate sodium salt (called G6PNa2) as a sole carbon source through one-step hydrothermal carbonization method. The method is simple and facile and meets the standards of green chemistry as water is the sole solvent employed. Following the hydrothermal carbonization synthesis, the carbonaceous spheres were further functionalized with Ti4+. The main factors including reaction temperature, reaction time, and concentration of G6PNa2 were systematically studied in order to obtain the desirable morphology and the optimum phosphopeptides enrichment, for the resulting Ti4+ functionalized carbonaceous spheres (CS-Ti4+). The performance evaluation of the CS-Ti4+ prepared under the optimum conditions demonstrated excellent selectivity (1:1000), low detection limit (1 fmol) and high recovery rate (85%) towards phosphopeptides. Furthermore, 24 low-abundance phosphopeptides were captured from human saliva using CS-Ti4+, indicating its great potential in mass spectrometry-based phosphoproteome studies.

Post-synthesis of biomimetic chitosan with honeycomb-like structure for sensitive recognition of phosphorylated peptides.

Chemical modification of biological materials is indispensable for enrichment of phosphorylated peptides. In this work, we synthesized a biomimetic honeycombed affinity chromatography (IMAC) adsorbent by preparing Crosslinked Chitosan, chelating aminomethyl phosphate decorated with Ti (IV) cation. The as-prepared CTSM@AMPA-Ti4+ composites with stable structure, low steric hindrance, and high Ti4+ loading amount were used as a promising adsorbent for enrichment of phosphopeptides. CTSM@AMPA-Ti4+ showed extremely high sensitivity (0.4 fmol) and selectivity at a low composition molar ratio of ß-casein/BSA (1:1000). What's more, it can keep its performance in the case that used to capture phosphorylated peptides from standard protein ten times or soaking in the acid/base solution for a long time. In addition, CTSM@AMPA-Ti4+ successfully captured 35 phosphorylated peptides from human saliva. This study offers a way about diversiform functionalization of CTSM in phosphoproteome analysis and disease research.

Bowl-like mesoporous polydopamine with size exclusion for highly selective recognition of endogenous glycopeptides.

It has been confirmed that endogenous glycopeptide plays an important role in a variety of pathological and physiological processes. However, direct analysis of endogenous glycopeptide is still a great challenge owing to the low abundance of endogenous glycopeptides and the presence of a large number of interfering substances such as large-sized proteins and heteropeptides in complex biological sample. Herein, we reported a novel bowl-like mesoporous polydopamine nanoparticle modified by carrageenan (denoted as MPDA@PEI@CA) with strong hydrophilicity and size-exclusion effect for high specificity enrichment of endogenous glycopeptides. Thanks to the suitable pore channel structure as well as strong hydrophilic surface, the as-prepared MPDA@PEI@CA nanoparticles exhibited prominent performance in enrichment of N-linked glycopeptide with ultrahigh selectivity (1:5000 M ratio of horseradish peroxidase (HRP) digests/bovine serum albumin (BSA) digests), low detection limit (5 fmol µL-1), outstanding size-exclusion ability (1:1000 mass of HRP/BSA), and unique reusability (five times). 125 N-glycosylation sites of 134 glycopeptides from 65 glycoproteins were identified from 2 µL sample of human serum treated with the MPDA@PEI@CA nanoparticles, which manifested the ability to enrich endogenous N-linked glycopeptides from complex biological samples. These results indicated that the bowl-like MPDA@PEI@CA nanoparticles with novel structure prepared in this work had great potential for glycopeptidome analysis.

Ultrasensitive nanoelectrospray ionization-mass spectrometry using poly(dimethylsiloxane) microchips with monolithically integrated emitters.

Poly(dimethylsiloxane) (PDMS) is a widely used substrate for microfluidic devices, as it enables facile fabrication and has other distinctive properties. However, for applications requiring highly sensitive nanoelectrospray ionization mass spectrometry (nanoESI-MS) detection, the use of PDMS microdevices has been hindered by a large chemical background in the mass spectra that originates from the leaching of uncross-linked oligomers and other contaminants from the substrate. A more general challenge is that microfluidic devices containing monolithically integrated electrospray emitters are frequently unable to operate stably in the nanoflow regime where the best sensitivity is achieved. In this report, we extracted the contaminants from PDMS substrates using a series of solvents, eliminating the background observed when untreated PDMS microchips are used for nanoESI-MS, such that peptides at concentrations of 1 nM were readily detected. Optimization of the integrated emitter geometry enabled stable operation at flow rates as low as 10 nL min(-1).

Facile preparation of polymer-grafted ZIF-8-modified magnetic nanospheres for effective identification and capture of phosphorylated and glycosylated peptides.

As a member of MOFs, Zn-MOFs (ZIF-8) are seldom used in phosphopeptide enrichment because ZIF-8 is soluble in acid solutions. Therefore, properly designing a novel strategy to overcome the defect of ZIF-8 is necessary. In this study, a novel multifunctional nanoprobe was designed by uniting magnetic core, titania shell and hydrophilic metal-organic frameworks (named as Fe3O4@PDA@mTiO2@PEI-g-ZIF-8). Integrating the strategies of hydrophilic interaction affinity chromatography (HILIC), immobilized metal ion affinity chromatography (IMAC) and metal oxide affinity chromatography (MOAC), the Fe3O4@PDA@mTiO2@PEI-g-ZIF-8 mesoporous microspheres can enrich phosphorylated peptides and glycosylated peptides simultaneously. Fe3O4@PDA@mTiO2@PEI-g-ZIF-8 has high selectivity (maximum molar ratio ß-casein/HRP : BSA = 1 : 1000), low detection limit (2 fmol) towards phosphopeptides and glycopeptides. Besides, the Fe3O4@PDA@mTiO2@PEI-g-ZIF-8 also exhibited a fine performance in the actual sample detection. In the experiment, taking saliva as a sample, 16 phosphorylated peptides were identified, and from a human serum sample, 4 phosphorylated peptides were selectively identified. All in all, the materials show great potential in the future study of phosphoproteomics and glycoproteomics.

"One-step" synthesis of a bifunctional nanocomposite for separation and enrichment of phosphopeptides.

In this work, a novel type of mesoporous magnetic nanocomposite (Fe3O4@PDA@TiO2@Cu3(BTC)2) was prepared by one-step method with ionic liquid (ILs) as solvent. ILs was used as templates for fabrication the porous material as well as green solvent. The material showed good sensitivity (1 fmol), excellent selectivity (molar ratio of phosphopeptides/non-phosphopeptides up to1:1000) and good repeatability (5 cycles) towards phosphopeptides. Furthermore, it has been applied to the enrichment of phosphopeptides in human saliva and human serum, 29 and 4 endogenous phosphopeptides were detected, respectively.

Fluorescent polymer dots and graphene oxide based nanocomplexes for "off-on" detection of metalloproteinase-9.

Numerous studies have demonstrated that cancer-related matrix metalloproteinase-9 (MMP-9) is an ideal biomarker for cancer diagnosis. However, most MMP-9 detection methods are expensive and time-consuming, and more convenient and specific MMP-9 detection methods are needed both clinically and in research. In the present study, peptide-linked polymer dots were assembled onto a graphene oxide surface to construct a graphene oxide-peptide-polymer dot (GO-Pep-Pdot) nanocomplex for sensitive, rapid, and accurate detection of MMP-9. In the absence of MMP-9, the nanocomplex was in an "off" state, whereas in the presence of MMP-9, the nanocomplex was turned "on", resulting in the emission of a fluorescence signal that is linearly correlated with the MMP-9 concentration. The limit of detection of the nanocomplex was 3.75 ng mL-1, lower than most methods. This method was successfully verified by detecting MMP-9 in clinical serum samples of prostate cancer. The results suggest that this protease nanocomplex is generic and can be adopted to respond to other proteases by selecting specific peptides with suitable cleavage sites in clinics.

Elastomeric microchip electrospray emitter for stable cone-jet mode operation in the nanoflow regime.

Despite widespread interest in combining laboratory-on-a-chip technologies with mass spectrometry (MS)-based analyses, the coupling of microfluidics to electrospray ionization (ESI)-MS remains challenging. We report a robust, integrated poly(dimethylsiloxane) microchip interface for ESI-MS using simple and widely accessible microfabrication procedures. The interface uses an auxiliary channel to provide electrical contact for the stable cone-jet electrospray without sample loss or dilution. The electric field at the channel terminus is enhanced by two vertical cuts that cause the interface to taper to a line rather than to a point, and the formation of a small Taylor cone at the channel exit ensures subnanoliter postcolumn dead volumes. Cone-jet mode electrospray was demonstrated for up to 90% aqueous solutions and for extended durations. Comparable ESI-MS sensitivities were achieved using both microchip and conventional fused silica capillary emitters, but stable cone-jet mode electrosprays could be established over a far broader range of flow rates (from 50-1000 nL/min) and applied potentials using the microchip emitters. This attribute of the microchip emitter should simplify electrospray optimization and make the stable electrospray more resistant to external perturbations.

Ion mobility spectrometry-mass spectrometry performance using electrodynamic ion funnels and elevated drift gas pressures.

The ability of ion mobility spectrometry coupled with mass spectrometry (IMS-MS) to characterize biological mixtures has been illustrated over the past eight years. However, the challenges posed by the extreme complexity of many biological samples have demonstrated the need for higher resolution IMS-MS measurements. We have developed a higher resolution ESI-IMS-TOF MS by utilizing high-pressure electrodynamic ion funnels at both ends of the IMS drift cell and operating the drift cell at an elevated pressure compared with that conventionally used. The ESI-IMS-TOF MS instrument consists of an ESI source, an hourglass ion funnel used for ion accumulation/injection into an 88 cm drift cell, followed by a 10 cm ion funnel and a commercial orthogonal time-of-flight mass spectrometer providing high mass measurement accuracy. It was found that the rear ion funnel could be effectively operated as an extension of the drift cell when the DC fields were matched, providing an effective drift region of 98 cm. The resolution of the instrument was evaluated at pressures ranging from 4 to 12 torr and ion mobility drift voltages of 16 V/cm (4 torr) to 43 V/cm (12 torr). An increase in resolution from 55 to 80 was observed from 4 to 12 torr nitrogen drift gas with no significant loss in sensitivity. The choice of drift gas was also shown to influence the degree of ion heating and relative trapping efficiency within the ion funnel.

Chemically etched open tubular and monolithic emitters for nanoelectrospray ionization mass spectrometry.

We have developed a new procedure for fabricating fused-silica emitters for electrospray ionization-mass spectrometry (ESI-MS) in which the end of a bare fused-silica capillary is immersed into aqueous hydrofluoric acid, and water is pumped through the capillary to prevent etching of the interior. Surface tension causes the etchant to climb the capillary exterior, and the etch rate in the resulting meniscus decreases as a function of distance from the bulk solution. Etching continues until the silica touching the hydrofluoric acid reservoir is completely removed, essentially stopping the etch process. The resulting emitters have no internal taper, making them much less prone to clogging compared to, e.g., pulled emitters. The high aspect ratios and extremely thin walls at the orifice facilitate very low flow rate operation; stable ESI-MS signals were obtained for model analytes from 5-microm-diameter emitters at a flow rate of 5 nL/min with a high degree of interemitter reproducibility. In extensive evaluation, the etched emitters were found to enable approximately four times as many LC-MS analyses of proteomic samples before failing compared with conventional pulled emitters. The fabrication procedure was also employed to taper the ends of polymer monolith-containing silica capillaries for use as ESI emitters. In contrast to previous work, the monolithic material protrudes beyond the fused-silica capillaries, improving the monolith-assisted electrospray process.