Odontogenic infections in the antibiotic era: approach to diagnosis, management, and prevention.

PURPOSE: The prevalence of odontogenic infections remains one of the highest in the world. If untreated, odontogenic infections can break through the limitation, disseminate to other organs or spaces, and cause high mortality rates. However, it is still difficult to rapidly target limited or disseminated infections in clinical practice. The type of disseminated odontogenic infections and the responsible bacteria have not been described in detail. METHODS: Search databases (e.g., PubMed, MEDLINE, Web of Science, Embase) for reports published from 2018.1 to 2022.9. Use search strategies: ("odontogenic infections" OR "pulpitis" OR "periapical lesions" OR "periodontal diseases") AND ("disseminated infections" OR "complication"). RESULTS: Fourteen different types of disseminated odontogenic infections, most of which are polymicrobial infections, can spread through the body either direct or through hematogenous diffusion. Multiple microbial infections can be more invasive in the transmission of infection. Secondary infections are commonly associated with bacteria like Fusobacterium spp., Streptococcus spp., Peptostreptococcus spp., Prevotella spp., and Staphylococcus spp. Antibiotics with broad-spectrum activity are fundamental as first-line antimicrobial agents based on the microorganisms isolated from disseminated infections. CONCLUSION: This review elaborates on the epidemiology, microorganisms, risk factors, and dissemination routes, and provides evidence-based opinions on the diagnosis, multidisciplinary management, and prevention of odontogenic infections for dentists and clinicians.

Construction and evaluation of an antioxidant synergistic system containing vitamin C and vitamin E.

AIMS: The aim of this study is to develop a liposome that could exert unparalleled antioxidant effects. In the present study, a vitamin C (VC)/vitamin E (VE)-co-loaded multivesicular liposome (VCVE-MVL) was constructed. METHODS: Vitamins were encapsulated in soybean phosphatidylcholine (SPC) and cholesterol (CHO) by multi-emulsification method. The concentration of VC was determined by Fast Blue method. The concentration of VE was determined by high performance liquid chromatography (HPLC). Vitamin antioxidant capacity in vitro and in vivo was determined using ß-carotene bleaching. RESULTS: VCVE-MVL with particle diameter of 848.55 ± 0.29 nm and SPAN of 0.16 ± 0.11 were obtained. The encapsulation efficiency of VC reached 48.51% (w/w)±0.15. Compared with VC/VE solution, VCVE-MVL had a higher permeation efficiency. In addition, the in vitro and ex-vivo antioxidant tests verified the adequate antioxidant activity of VCVE-MVL. CONCLUSIONS: In conclusion, the antioxidant synergistic system we constructed and demonstrated its potential applications in the cosmetics industry.

Effect of forceful suction and air disinfection machines on aerosol removal.

BACKGROUNDS: Dental procedures involving drilling and grinding can produce a significant amount of suspended aerosol particles (PM) and bioaerosols. This study aims to analyze the size and concentration of aerosol particles generated during drilling and to investigate the effectiveness of two air exchange systems, namely forceful suction (FS) and air disinfection machines (DM), in removing PM. METHODS: For this study, 100 extracted permanent teeth were collected and divided into three groups: without suction (n = 50), suction with forceful suction (n = 25), and suction with air disinfection machines (n = 25). The removal rate of suspended aerosol particles was analyzed using particle counters and air data multimeter. RESULTS: When drilling and grinding were performed without vacuum, 0.75% of the aerosol particles generated were PM2.5-10, 78.25% of total suspended aerosol particles (TSP) were PM2.5, and 98.68% of TSP were PM1. The nanoanalyzer measurements revealed that the aerodynamic diameter of most aerosol particles was below 60 nm, with an average particle diameter of 52.61 nm and an average concentration of 2.6*1011 ultrafine aerosol particles. The air change per hour (ACH) was significantly lower in the air disinfection machines group compared to the forceful suction group. Additionally, the number of aerosol particles and mass concentration was significantly lower in the air disinfection machines group compared to the forceful suction group in terms of PM2.5 levels. However, the forceful suction group also reduced the mass concentration in PM10 level than the air disinfection machines group. CONCLUSION: In conclusion, the air exchange system can reduce the aerosol particles generated during drilling and grinding. Comparing the two air exchange systems, it was found that the air disinfection machines group reduces the number of aerosol particles and mass concentration in PM2.5 levels, while the forceful suction group reduces the mass concentration in PM10 level.

End-of-treatment HBcrAg and HBsAb levels identify durable functional cure after Peg-IFN-based therapy in patients with CHB.

BACKGROUND & AIMS: Functional cure can be sustained in a proportion of patients with chronic hepatitis B (CHB) who lose hepatitis B surface antigen (HBsAg) after pegylated interferon alpha (Peg-IFN-ɑ)-based treatment. In this study, we aimed to identify biomarkers associated with a durable functional cure and to dissect potential immunological mechanisms. METHODS: Of 257 nucleos(t)ide analogue-suppressed patients with CHB in the ANCHOR study, 80 patients randomly assigned to 96-week Peg-IFN-α-based therapy with 24-week off-treatment follow-up were included in this parallel study. Virologic and immunological biomarkers were examined dynamically. A response was defined as HBsAg loss or hepatitis B surface antibody (HBsAb) appearance at the end of treatment (EOT). Sustained response (SR) or durable functional cure was defined as sustained HBsAg loss with or without the appearance of HBsAb at the end of follow-up (EOF). RESULTS: Thirty-six (45.0%) out of 80 patients achieved a response at EOT; 58.3% (21/36) of responders maintained SR at EOF. Quantitative hepatitis B core-related antigen (qHBcrAg) and HBsAb at EOT were associated with SR, with AUROCs of 0.697 (0.512-0.882, p = 0.047) and 0.744 (0.573-0.915, p = 0.013), respectively. A combination of HBcrAg <4 log10U/ml and HBsAb >2 log10IU/L at EOT had a positive predictive value of 100% for SR with an AUROC of 0.822 (0.684-0.961, p = 0.001). These patients showed maintained proportions of HBV envelope-specific CD8+T and B cells, a markedly increased proportion of T follicular helper cells after Peg-IFN-ɑ discontinuation, and significantly higher proportions of HBV polymerase-specific CD8+T and CD86+CD19+B cells at EOF. CONCLUSIONS: Lower HBcrAg and higher HBsAb levels at EOT were associated with sustained cellular and humoral immune responses. They can be used to identify patients likely to achieve durable functional cure post Peg-IFN-based therapy. GOV IDENTIFIER: NCT02327416 LAY SUMMARY: Functional cure can be sustained in a proportion of patients with chronic hepatitis B after pegylated interferon alpha-based treatment. However, predicting who will achieve durable functional cure remains challenging. Herein, we show that low levels of hepatitis B core-related antigen and higher levels of hepatitis B surface antibodies at the end of treatment are linked to immunological responses and are associated with durable functional cure.

A Two-Stage Training Program for Auricular Framework Fabrication Practicing Using Three-Dimensional Printing Silicone Ribs and Porcine Costal Cartilage.

BACKGROUND: The manufacture of cartilage framework is a key element in the success of total ear reconstruction. Appropriate training can improve cartilage curving and fabricating skills, which is especially helpful for the novice clinicians. Based on threedimensional printing silicone model and porcine rib cartilage, the authors have designed a 2-stage training program to improve skills and cosmetic cognition for ear reconstruction. METHODS: The training program includes 2 successive stages. In the first stage, trainees completed observation of framework fabrication, design and sculpturing practice on silicone rib models. Porcine costal cartilages are used for fabrication in the second stage. After that, the framework was put in a latex glove connected with a suction to simulate the skin cover procedure in operation. RESULTS: At the end of the training program, all trainees could fabricate an ear-shaped cartilage framework successfully. Their cosmetic cognitions of the ear have also improved. CONCLUSIONS: Based on three-dimensional printing silicone model and porcine rib cartilage, the authors have designed a 2-stage training program to improve trainee's carving techniques and cosmetic cognition for ear reconstruction. The authors believe that this training program is helpful in training, practicing and teaching activities of framework fabrication in total ear reconstruction.

Reconstruction of the Defect at Temporal Hairline by a Scalp Keystone Island Flap: Clinical Experience on 14 Cases.

BACKGROUND: The reconstructions of defects at the temporal hairline always require more complicated designs and higher surgical skills to acquire better aesthetic results. By taking advantage of the unique anatomy of the temporal region, the authors designed a scalp keystone island flap pedicled by superficial temporal fascia to repair defects on the temporal hairline. METHODS: The authors retrospectively analyzed the clinical data of 14 patients who had lesions adjacent to the temporal hairline between April 2018 and June 2020. Patients were diagnosed with basal cell carcinoma, squamous-cell carcinoma, or seborrheic keratosis. These lesions were resected and reconstructed by scalp keystone island flaps. The defects ranged from 2.0 cm × 1.5 cm to 3.0 cm × 3.5 cm. RESULTS: All patients were satisfied with postoperative morphology and reported no recurrence at the 6 to 24 months follow-up. Flaps in two patients were partially necrosed but eventually healed by dressing changes. The rest had the first intention of healing. CONCLUSIONS: The scalp keystone island flap is a very useful method to repair small or medium defects at the temporal hairline. This flap can be flexibly designed and easily performed with a high survival rate and good aesthetic results. It provides another surgical option for complicated reconstruction.

A Bridge-Linked Phosphorus-Containing Flame Retardant for Endowing Vinyl Ester Resin with Low Fire Hazard.

The high flammability of vinyl ester resin (VE) significantly limits its widespread application in the fields of electronics and aerospace. A new phosphorus-based flame retardant 6,6'-(1-phenylethane-1,2 diyl) bis (dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (PBDOO), was synthesized using 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and acetophenone. The synthesized PBDOO was further incorporated with VE to form the VE/PBDOO composites, which displayed an improved flame retardancy with higher thermal stability. The structure of PBDOO was investigated using Fourier transformed infrared spectrometry (FTIR) and nuclear magnetic resonances (NMR). The thermal stability and flame retardancy of VE/PBDOO composites were investigated by thermogravimetric analysis (TGA), vertical burn test (UL-94), limiting oxygen index (LOI), and cone calorimetry. The impacts of PBDOO weight percentage (wt%) on the flame-retardant properties of the formed VE/PBDOO composites were also examined. When applying 15 wt% PBDOO, the formed VE composites can meet the UL-94 V-0 rating with a high LOI value of 31.5%. The peak heat release rate (PHRR) and the total heat release (THR) of VE loaded 15 wt% of PBDOO decreased by 76.71% and 40.63%, respectively, compared with that of untreated VE. In addition, the flame-retardant mechanism of PBDOO was proposed by analyzing pyrolysis behavior and residual carbon of VE/PBDOO composites. This work is expected to provide an efficient method to enhance the fire safety of VE.

The association between low birth weight and dental caries among 11-to-13-year-old school age children in Ningbo, China.

BACKGROUND: The association between low birth weight (LBW) and dental caries is currently unclear. The aim of this study was to investigate the association of LBW with dental caries in permanent teeth in children of Ningbo city. METHODS: A total of 1975 children aged 11-to-13 years in Ningbo, China were enrolled in this cross-sectional study. LBW was defined as a birthweight< 2500 g. Ten dentists assessed the status of dental caries in permanent teeth in line with the World Health Organization (WHO) criteria and guidelines. Decayed, missing or filled teeth were considered to have dental caries. Parental questionnaires were used to collect child information. Non-conditional logistic regression analysis was used to estimate odds ratios (ORs) and the corresponding 95% confidence intervals (CIs). RESULTS: Dental caries in permanent teeth was found in 610 children (30.9%), with a mean DMFS of 2.09 (SD = 1.2). The adjusted ORs for dental caries in permanent teeth was 1.46 (95% CI 1.00, 2.13) for LBW. CONCLUSIONS: LBW was not associated with dental caries in permanent teeth in the study population.

Effect of tetrahedral DNA nanostructures on proliferation and osteo/odontogenic differentiation of dental pulp stem cells via activation of the notch signaling pathway.

Dental pulp stem cells (DPSCs) derived from the human dental pulp tissue have multiple differentiation capabilities, such as osteo/odontogenic differentiation. Therefore, DPSCs are deemed as ideal stem cell sources for tissue regeneration. As new nanomaterials based on DNA, tetrahedral DNA nanostructures (TDNs) have tremendous potential for biomedical applications. Here, the authors aimed to explore the part played by TDNs in proliferation and osteo/odontogenic differentiation of DPSCs, and attempted to investigate if these cellular responses could be driven by activating the canonical Notch signaling pathway. Upon exposure to TDNs, proliferation and osteo/odontogenic differentiation of DPSCs were dramatically enhanced, accompanied by up regulation of Notch signaling. In general, our study suggested that TDNs can significantly promote proliferation and osteo/odontogenic differentiation of DPSCs, and this remarkable discovery can be applied in tissue engineering and regenerative medicine to develop a significant and novel method for bone and dental tissue regeneration.

Repair of Craniomaxillofacial Traumatic Soft Tissue Defects With Tissue Expansion in the Early Stage.

BACKGROUND: Craniomaxillofacial traumatic soft tissue defects severely affect the function and appearance of the patients. The traditional skin grafting or free flap transplantation can only close the defects in the early stage of operation but cannot ensure similar color, texture, and relative aesthetic contour. In the present study, the authors have explored a novel strategy to repair craniomaxillofacial traumatic soft tissue defects by tissue expansion in the early stage and have obtained satisfactory results. METHODS: Eighteen patients suffering large craniomaxillofacial traumatic soft tissue defects were treated by thorough debridement leaving the wounds unclosed or simply closed with thin split-thickness scalp grafts, adjacent expander implantation in the first stage, and expanded flap transposition in the second stage. RESULTS: There were 11 male patients and 7 female patients ranging in age from 3.5 to 40 years (mean, 19.4 ±â€Š12.2 years), with average 15 months follow-up (range, 3-67 months). The average expansion time was 74.3 days (range, 53-96 days). The 18 patients with a total of 22 expanders were treated with satisfactory results. All the flaps survived and the skin color, texture, and contour well matched those of the peripheral tissue. Only 1 complication of infection happened in the 18 cases (5.56%) and the 22 expanders (4.55%), which was similar to the rate reported in the literature. No other complications related to the expanders occurred. CONCLUSION: Debridement and tissue expansion in the early stage has been proved to be a more effective strategy to repair craniomaxillofacial traumatic soft tissue defects. This strategy can not only achieve satisfactory color, unbulky and well-matched texture similar to normal, but also avoid unnecessary donor site injuries.

Porous polymers by controlling phase separation during vapor deposition polymerization.

A template-free method is described to fabricate continuous-phase, porous polymer films by simultaneous phase separation during vapor deposition polymerization. The technique involves concurrent polymerization, crosslinking, and phase separation of condensed species and reaction products. Deposited films form open-cell, macroporous structures consisting of crosslinked and glassy poly(glycidyl methacrylate). By limiting phase separation during vapor phase deposition, spatially dependent morphologies, such as layered morphologies, can be grown. Results show that combining vapor deposition polymerization with phase separation establishes morphological control, which may be applied to applications including cellular scaffolds, thin cushions and vibration dampers, and membranes for separations.

Primary repair of broad bilateral complete cleft palate with hard palate rotation flap.

It was hard to achieve primary repair for infants with broad bilateral complete cleft palate, and usually multiple procedures are demanded, resulting in multiple injuries and scar hyperplasia, which could influence infants' long-term phonetic function. In this study, primary repair was carried out on 12 cases of 18- to 30-month-old infants who had complete cleft palate by using rotated hard palate flap with a pedicle on the edge of the fissure modified on the basis of traditional von Langenbeck palatoplasty. Eight infants were subjected to initial phonetic sound evaluation at 1 to 2 years after the operation. All the 12 cases of infant complete cheilopalatognathus had fine healing, and no complications such as dyspnea and fistulous opening in palate were observed. The effects of phonetic sound in 8 infants who had this disease were significantly improved as observed in the long-term follow-up. Thus, we consider it as a reliable and feasible procedure to perform hard palate mucosa rotation flap for the primary repair of broad bilateral complete cleft palate. The procedure is simple, while it produces satisfactory therapeutic effects, by which the patients with complete cleft palate could achieve good recovery in their phonetic functions.

Near-ultraviolet irradiation to stimulate unmodified polyether ether ketone to achieve stable and sustainable antibacterial activity.

OBJECTIVES: This study aims to investigate the cytotoxicity and sustainable antibacterial activity of unmodified PEEK under specific wavelength light treatment (365 nm), and its antibacterial mechanism was also preliminarily discussed. METHODS: A near-ultraviolet source with a wavelength of 365 nm and a power of 5 W were selected. The irradiation time was 30 min, and the distance was 100 mm. A water contact angle tester was used to characterize the surface of the PEEK after 1-15 light treatments. MC3TC-E1 cells were used to evaluate the cytotoxicity of the materials under light treatment. Five kinds of common oral bacteria were detected in vitro, and antibacterial efficiency was determined by colony-forming unit (CFU) and scanning electron microscope (SEM). The antibacterial mechanism of PEEK under light was preliminarily discussed by spectrophotometry. The membrane rupture of Staphylococcus aureus and Escherichia coli was detected by lactate dehydrogenase. Staphylococcus aureus and Staphylococcus mutans were selected for the cyclic antibacterial test. Statistical analysis was performed by one-way analysis of variance and Tukey multiple range test. A significance level of 0.05 was considered (α = 0.05). RESULTS: The results of the cell experiment showed that PEEK had no cytotoxicity (P > 0.05). CFU results showed that PEEK had an obvious antibacterial effect on Staphylococcus aureus, Staphylococcus mutans, Staphylococcus gordonii and Staphylococcus sanguis, but had no antibacterial effect on Escherichia coli (P < 0.05). The SEM results also verified the above antibacterial effect. The existence of singlet oxygen was confirmed by spectrophotometry. Meanwhile, the rupture of Staphylococcus aureus membrane was verified by lactate dehydrogenase assay. The water contact angle of the PEEK surface did not change significantly after 15 cycles of light treatment. Cyclic antibacterial experiments showed that the antibacterial effect was sustainable. CONCLUSIONS: This study showed that PEEK has good cytocompatibility with stable and sustainable antibacterial properties under near-ultraviolet. It provides a new idea to solve the non-antibacterial property of PEEK, and also provides a theoretical basis for its further application in dentistry.

Condensation and polymerization of supersaturated monomer vapor.

Initiated chemical vapor deposition (iCVD) of poly(glycidyl methacrylate) from supersaturated monomer vapor is reported. Rapid film growth rates, up to 600 nm/min, were observed. Films grown from supersaturated monomer exhibited distinct surface undulations. The temporal evolution of surface features during film growth was studied and is explained by monomer condensation followed by droplet coalescence and film growth. High droplet densities were observed at the early times and are attributed to rapid polymerization of monomer within condensed liquid nuclei. Droplet nucleation resulting in surface undulations can be avoided by first depositing a thin, cross-linked film from ethylene glycol diacrylate monomer followed by deposition of supersaturated monomer vapors.

Lignin biosynthesis regulated by CsCSE1 is required for Cucumis sativus defence to Podosphaera xanthii.

Lignin is a complex phenolic compound that can enhance the stiffness, hydrophobicity, and antioxidant capacity of the cell wall; it thus provides a critical barrier against pathogen and insect invaders. Caffeoyl shikimate esterase (CSE) is a key novel enzyme involved in lignin biosynthesis that is associated with genetic improvements in lignocellulosic biomass; however, no research thus far have revealed the role of CSE in resistance to pathogenic stress. CsCSE1 (Cucsa.134370) has previously been shown to highly associated with the response of cucumber to attack by Podosphaera xanthii through RNA sequencing. Here, we detected the exactly role of CsCSE1 in the defence of cucumber to P. xanthii infection. Homologous sequence alignment revealed that CsCSE1 contains two highly conserved lyase domains (GXSXG), suggesting that CsCSE1 possesses CSE activity. Subcellular localization analysis manifested that CsCSE1 was localized to the plasma membrane and endoplasmic reticulum (ER). Functional analysis demonstrated that the transient silencing of CsCSE1 in cucumber dramatically attenuated resistance to P. xanthii, whereas overexpression of CsCSE1 in cucumber markedly increased resistance to P. xanthii. Further investigation of the abundance of lignin in transient transgenic plants revealed that CsCSE1 might actively mediate the disease resistance of cucumber by promoting lignin biosynthesis. CsCSE1 also affects the expression of its downstream lignin biosynthesis-related genes, like CsLAC, CsCOMT, CsCCR, and CsCAD. The results of this study provide targets for the genetic breeding of tolerant cucumber cultivars as well as new insights that could aid the control of plant diseases.

Mechanistic Insights into the Protection Effect of Argonaute-RNA Complex on the HCV Genome.

While host miRNA usually plays an antiviral role, the relentless tides of viral evolution have carved out a mechanism to recruit host miRNA as a viral protector. By complementing miR-122 at the 5' end of the genome, the hepatitis C virus (HCV) gene can form a complex with Argonaute 2 (Ago2) protein to protect the 5' end of HCV RNA from exonucleolytic attacks. Experiments showed that the disruption of the stem-loop 1(SL1) structure and the 9th nucleotide (T9) of HCV site 1 RNA could enhance the affinity of the Ago2 protein to the HCV site 1 RNA (target RNA). However, the underlying mechanism of how the conformation and dynamics of the Ago2: miRNA: target RNA complex is affected by the SL1 and T9 remains unclear. To address this, we performed large-scale molecular dynamics simulations on the AGO2-miRNA complex binding with the WT target, T9-abasic target and SL1-disruption target, respectively. The results revealed that the T9 and SL1 structures could induce the departing motion of the PAZ, PIWI and N domains, propping up the mouth of the central groove which accommodates the target RNA, causing the instability of the target RNA and disrupting the Ago2 binding. The coordinated motion among the PAZ, PIWI and N domains were also weakened by the T9 and SL1 structures. Moreover, we proposed a new model wherein the Ago2 protein could adopt a more constraint conformation with the proximity and more correlated motions of the PAZ, N and PIWI domains to protect the target RNA from dissociation. These findings reveal the mechanism of the Ago2-miRNA complex's protective effect on the HCV genome at the atomic level, which will offer guidance for the design of drugs to confront the protection effect and engineering of Ago2 as a gene-regulation tool.

Differential lncRNA/mRNA Expression Profiling and Functional Network Analyses in Bmp2 Deletion of Mouse Dental Papilla Cells.

Bmp2 is essential for dentin development and formation. Bmp2 conditional knock-out (KO) mice display a similar tooth phenotype of dentinogenesis imperfecta (DGI). To elucidate a foundation for subsequent functional studies of cross talk between mRNAs and lncRNAs in Bmp2-mediated dentinogenesis, we investigated the profiling of lncRNAs and mRNAs using immortalized mouse dental Bmp2 flox/flox (iBmp2fx/fx) and Bmp2 knock-out (iBmp2ko/ko) papilla cells. RNA sequencing was implemented to study the expression of the lncRNAs and mRNAs. Quantitative real-time PCR (RT-qPCR) was used to validate expressions of lncRNAs and mRNAs. The Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases were used to predict functions of differentially expressed genes (DEGs). Protein-protein interaction (PPI) and lncRNA-mRNA co-expression network were analyzed by using bioinformatics methods. As a result, a total of 22 differentially expressed lncRNAs (16 downregulated vs 6 upregulated) and 227 differentially expressed mRNAs (133 downregulated vs. 94 upregulated) were identified in the iBmp2ko/ko cells compared with those of the iBmp2fx/fx cells. RT-qPCR results showed significantly differential expressions of several lncRNAs and mRNAs which were consistent with the RNA-seq data. GO and KEGG analyses showed differentially expressed genes were closely related to cell differentiation, transcriptional regulation, and developmentally relevant signaling pathways. Moreover, network-based bioinformatics analysis depicted the co-expression network between lncRNAs and mRNAs regulated by Bmp2 in mouse dental papilla cells and symmetrically analyzed the effect of Bmp2 during dentinogenesis via coding and non-coding RNA signaling.

Reversible thermal regulation for bifunctional dynamic control of gene expression in Escherichia coli.

Genetically programmed circuits allowing bifunctional dynamic regulation of enzyme expression have far-reaching significances for various bio-manufactural purposes. However, building a bio-switch with a post log-phase response and reversibility during scale-up bioprocesses is still a challenge in metabolic engineering due to the lack of robustness. Here, we report a robust thermosensitive bio-switch that enables stringent bidirectional control of gene expression over time and levels in living cells. Based on the bio-switch, we obtain tree ring-like colonies with spatially distributed patterns and transformer cells shifting among spherical-, rod- and fiber-shapes of the engineered Escherichia coli. Moreover, fed-batch fermentations of recombinant E. coli are conducted to obtain ordered assembly of tailor-made biopolymers polyhydroxyalkanoates including diblock- and random-copolymer, composed of 3-hydroxybutyrate and 4-hydroxybutyrate with controllable monomer molar fraction. This study demonstrates the possibility of well-organized, chemosynthesis-like block polymerization on a molecular scale by reprogrammed microbes, exemplifying the versatility of thermo-response control for various practical uses.

Consumer-Based Sensory Characterization of Steviol Glycosides (Rebaudioside A, D, and M).

Rebaudioside (Reb) D and M are the recent focus of the food industry to address the bitter taste challenge of Reb A, which is the most commonly used steviol glycoside in natural sweetener stevia. This study evaluated the sensory characteristics of Reb A, D, and M, compared to 14% (w/v) sucrose, using a consumer panel and explored the relationship between 6-n-Propylthiouracil (PROP) taster status (i.e., non-tasters, medium tasters, supertasters) and the perceived intensity of sweet and bitter tastes of the three steviol glycosides. A total of 126 participants evaluated the intensities of in-mouth, immediate (5 s after expectorating), and lingering (1 min after expectorating) sweetness and bitterness of 0.1% Reb A, D, M, and 14% sucrose and described the aftertaste of the sweeteners by using a check-all-that-apply (CATA) question. The results showed that in-mouth sweetness and bitterness of Reb D and M were not significantly different from sucrose, unlike Reb A which showed significant bitterness. However, Reb D and M showed more intense lingering sweetness than sucrose. The CATA analysis resulted that Reb D and M were closer to positive attribute terms and also to sucrose than Reb A, but Reb D and M were still considered artificial, which may cause them to be perceived negatively. When comparing among PROP taster groups, no significant differences in the perceived sweetness and bitterness of the three steviol glycosides were found. This study generates important information about Reb A, D, and M for the food industry, especially working with products formulated to deliver reductions in sugar using a natural high-intensity sweetener, stevia.

In vitro and in vivo evaluation of liposomes modified with polypeptides and red cell membrane as a novel drug delivery system for myocardium targeting.

Ischemic cardiac disease (ICD) is a cardiovascular disease with high morbidity and mortality. In this study, a novel myocardial targeted drug delivery system was developed represented by co-modified liposomes consisting of red cell membrane (RCM), and the peptides TAT and PCM. Liposomes were prepared using a membrane dispersion-ultrasonic method; the prepared 1% TAT and 3% PCM micelles were mixed with liposomes and under overnight stirring to form polypeptid-modified liposomes. RCM was isolated from mice blood, and the mechanical force facilitated RCM adhesion to the lipid bilayer. The characteristics of liposomes such as the morphology, particle size, zeta-potential, and RCM-conjugation to lipsomes were evaluated. Uptake efficiency and cellular toxicity of liposomes were evaluated in vitro on myocardial cells (MCs). As regard the experiments in vivo, liposomes were intravenously injected into mice, and the blood and organs were collectedat different times to analyze the pharmacokinetics profile of liposomes. The cellular uptake and intracellular distribution of liposomes of different composition into MCs demonstrated that RCM-modified liposomes had the best delivery capability. The pharmacokinetics study further demonstrated that RCM-modified liposomes had prolonged mean residence time (MRT) and more accumulation in the heart. This study indicated that RCM can be used to modify liposomes in combination with polypeptides, because such modification increases the myocardial targeting of liposomes. Therefore, this system constructed in this study might be a potentially effective myocardial drug delivery system.